enable outbound access to TCP ports

Similar Questions

• Error related to access TCP port 443

  Hello ,
  
  I of submit an application for approval through the application loader and I am always bump on one access error related to TCP port 443.
  Nobody knows How to set up this access on mac. I have the version 10.8.3 montain lion mac os x.
  
  Sending a photo of the error .

  
  

  If you are working behind a corporate network, contact your IT. Also try turning on your Internet/Web Sharing sharing in the system preferences topic.

• Open the TCP Port

  I'm trying to implement a TCP port to listen to music on my home network through JRiver. The server and work remotely on my home network. But I want to access on the network side.

  I use ATT Uverse to access the internet. I disabled wireless and ATT modem to transmit to my Airport Extreme.

  I have these instructions to configure the port:

  1. Open AirPort Utility and change your AirPort Extreme or AirPort Express. Select the tab network (image). Select the sign of closer Port settings box. The Type of Firewall entry should be IPv4 Port Mapping. Enter a description like JRiver Media Center. Enter the Public 52199 TCP Port. Enter the private IP address, it's the IP address of your JRiver Media Center PC at home. Enter the TCP Port private 52199. Click on save, and then click Update. (image)

  When coming to this page, however, the firewall main entry box Type "IPv6" entered and grayed out, so it cannot be changed.

  Any help would be greatly appreciated.

  Sorry, but no image is available.

  However, to start, running the AirPort Utility > select the AirPort Extreme > change > Internet tab > Internet Options...

  What is the value to configure IPv6? If it is 'Automatically', change it to "Link-local." only (Note: I'm assuming that your ISP DO provide you IPv6 service still.)

• Windows Server 2008 R2, driver HP 7410 AIO, TCP Port printing

  I just finished a new installation of Windows Server 2008 R2 64 bit on my computer that was previously using Windows Server 2008 64 bit and can't set up access to the network at my AIO 7410 printer. I would use the most recent driver Windows 7 64 bit (AIO_CDB_FSW_Full_Win_WW_130_141.exe), but the installation of the driver complains "this type of product does not have the list of the types of supported products. My first question is a driver Windows 2008 R2 64-bit will be available soon since none are currently provided?

  The way, I have Vista (AIO_CDB_Full_Network_enu_NB.exe) that does not detect the printer (192.168.1.100) of the computer (192.168.1.2) if I get the installation to complete using the USB option then try the last driver. Once done, I try to change the properties of the printer to change the used "USB001" port - virtual printer to USB port to a TCP port. However, when I click on the "add a Port" and choose "Standard TCP/IP Port" I get a dialog with a title "Add Printer Ports" and the error message "cannot add port specified. Access is denied. »

  Has anyone solved what is the root cause of this error? I am an administrator on the PC and have never seen this before curve ball.

  I should add that a test page print correctly via the USB cable and another Vista PC on the network continues to access the printer through the network so that the printer works fine.

  Thanks in advance!

  Google is my friend! Found this thread: http://forums.techguy.org/windows-vista/541278-solved-access-denied-network-printers.html that helped.

  The main steps are to create a new local printer, select the TCP port and provide the IP address of the printer. Windows query the printer and will automatically detect the HP 7410 driver is already installed and ask if it should use this driver I have answered Yes to. You should see a second printer now available in the control panel which is probably selected as the default printer. I unplugged the USB cable, print a test page using the new TCP profile and it works beautifully.

  I wish it was not so difficult to switch from a USB port to a TCP port, but I'm happy to have found a work around.

  I hope that this avoids some of the pain of losing a darker night of their lives thanks to the peculiarities of Windows!

• ACL tcp port filter

  Dear experts,

  I study the ACL to (stop) the tcp port filter at the bottom of the URL

  http://www.Cisco.com/en/us/Tech/tk648/tk361/technologies_configuration_example09186a0080100548.shtml

  In the section of "allow only internal networks to initiate a TCP Session ', grateful if someone could enlighten me the use of the 'established '.

  interface ethernet0 ip access-group 102 in ! access-list 102 permit tcp any any gt 1023 established

  What is different if the ACL is changed as a result of:

  access-list 102 permit tcp any any gt 1023

  RDG

  Both your ACL suggested 101 and 145 are quite correct.

  ACL 105: Note should say, allow traffic back on tcp/80, with the source port greater than 1023. The rest of your comment is correct.

  ACL 115: Note should say allow all traffic with a source port of HTTP (TCP/80) and destination port above 1023.

  ACL 125: Note should say allow all the return of traffic with a source port of HTTP (TCP/80). And Yes, you are right, it also includes the ACL 105 function.

  ACL 135: Note should say allow all traffic with a source port of HTTP (TCP/80). And Yes, you are right, it also includes the ACL 115 function.

• Use of TCP Port when adding sensors to virtual machines

  What port TCP VMS use when adding a sensor to VMS security monitor, etc. Device Manager?

  RDEF listener uses port?

  Port UDP 45000 remained in IDS4.x or is it only required in ID 3 x?

  Thank you.

  A listener RDEP, if I understand the context of your question, is the process on the ID device that is connected to by customers RDEP (VEI, CTR, VMS / IDSMC). Since this is a server process, he listens to TCP 443. It can be configured to listen on TCP 80, but it is not a default setting.

  The only other default port used by Cisco IDS 4.x is TCP 22 (SSH) to access the CLI and some file copy operations (scp, for example). Again, you can configure the use of TCP 23 (TELNET) to access CLI, but is not a default setting.

  In summary, a device (IDS-42XX, JOINT-2, NM-CIDS) will have only two ports open by default. 22 TCP and 443. 22 TCP is used by SSH for CLI access and TCP 443 is used to access RDEP and IDM.

  Finally, UDP 45000 is not used by Cisco IDS 4.x; It was only used in 3.x and more for the former communication protocol.

  I hope this helps.

  Alex Arndt

• Which TCP port is used for VMWare Infrastructure Client?

  Hello, my ESXi server sits on the private network, and I'm trying to PAT so that I can access the external network using VMWare Infrastructure Client Server. Does anyone know what port is VMWare Infrastructure Client listen? Thank you.

  Priscilla

  Do the external network for VMware NAT

  I guess you mean that your server is located in the internal network and Client is on the outside.

  If the customer does not have to "listen" for connections it opens TCP ports - HI 1024-65535 to servers as follows.

  Servers (including GSX) TCP ports: 8222, 8333, 902

  If you have ESX (i) then TCP ports: 80, 443, 902

  T:OMI

  Psalm Points, please

• Is it possible to access the USB ports and a slot for card SDX?

  Is it possible to access the USB ports and a slot for SDX card at the back of the iMac?

  Rotate the iMac autour to see ports.

• I can't play Backgammon MSN or Spades. Said the Coachman TCP Port... I CAN play computer well... simply not another player

  Can not play backgammon MSN or Spades said... Check TCP Port... I did nothing...

  It works very well for computer... can't play other players

  Hello

  See this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-networking/why-is-MSN-zone-down-this-weekend/451c019e-a29d-4A32-bd1f-e1d4137622aa

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I'm waiting times tries to access a parallel port with VISA

  I get VISA time-out errors when you try to write to the parallel port. MAX said that the port works and I should be able to communicate with him. Device Manager Windows 2000 also said that the device works. I use writing to the parallel port with VISA example I found on the site of nor. To make it even more confusing (or), it runs on one computer but not another. All software and drivers are the same on both machines. On one who gives me the error of time-out, I am able to write to the parallel port using "accesshw".

  What a coincidence. The computer that I had problems with is also a Dell Optiplex. The pins of wiring together the way that you have specified has solved my problem of timeout. The cable I got with just bad has terminals 11 and 12 low attached as indicated on the page with a link to the code sample titled "with the help of VISA to access the Parallel Port in LabVIEW" I know why the original cable worked with a bridge but not a Dell Optiplex. Thanks for the quick fix!

• T60p w / no BT not found, no access I/O port menu!

  Hello

  I have a T60p w / bluetooth factory, no BT option (under preload Xp or another drive of W7, in that I was going to Exchange).

  installed all the updates, update BIOS giving, nada.  No BT device not found, no radio BT under FN + F5, all the usual stuff fails.

  strange thing is that I have NO menu 'I/o port access' to all security BIOS.  That's where I would allow BT (if it is installed and not dead).

  as in this post: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Does-the-ThinkPad-have-Bluetooth/ta-p/49160... even if there is no BT, there are other products covered by this I/O menu, such as wireless, USB, etc.  How do I have an I/O menu and how to fix this?

  it sucks.  I have a 2nd T60p machine (this one without BT option), and that there is no menu access I/O port security BIOS either.  What is going on?

  Thanks in advance.

  problem solved.  It was in the bios, had to scroll down, not before, see active hidden past.

  has had a lot of work to get the stupid TP BT laser mouse to connect, but there finally.  Windows Update stopped working, gave service does not no error message.  tried everything on the net without success.  Finally fixed by the Assembly of updated Storage Manager intel of all things.  Looks like everything works now.  W7 was not a transparent installation on this machine.

• EasyVPN and TCP ports

  Hey people,

  You have another problem with EasyVPN that requires assistance.

  Or actually, not as a problem but more a wish.

  I saw that easyVPN is able to send the VPN on TCP traffic.

  You can also specify the port to use.

  vpnclient ipsec-over-tcp port 
  
      
  Now it would be really great if it would be possible to set up the tunnel over a standard port
  
      that is open on most firewalls: 443
  
      

  Unfortanetly when I do this:

  vpnclient ipsec-over-tcp port 443
  
  
      The tunnel is gone and wont set itself back up.
  
      
  Is it possible to do this, and send it over 443 or another standard port?
  
  The errors/messages in the EasyVPN server log:
  Built inbound TCP connection 625 for outside:10.1.0.2/1075 (10.1.0.2/1075) to identity:10.0.0.1/443 (10.0.0.1/443)
  
  Teardown TCP connection 625 for outside:10.1.0.2/1075 to identity:10.0.0.1/443 duration 0:00:08 bytes 0 TCP Reset-O
  
  
      Any ideas on this?
  
      

  Unfortunately can't use any of the well known ports, IE: anything below port 1024.

• ACE - probe on VIP sfarm TCP port failed

  Hello

  I noticed that AS addresses for TCP SYN sent by external device (in my example: GSS device) to the virtual IP address of a serverfarm is perfected OUTOFSERVICE - due to the failure rservers (ARP failed).

  A context is configured on the ACE module that is in bridge mode. VIP serverfarm is listening on a TCP port.

  Do you know why the AS sends TCP SYN ACK, even if all the rservers in the serverfarm are declining?

  How address this situation and to define the ACE to respond on these request only if VIP is ACTIVE because of the State CONTINUES to sfarm?

  Krzysztof salvation,

  What version of ACE are you running?

  When ACE meets the keepalive GSS what is the status of VIP (in-service or out-of-service) in show-service policy

  It could be a bug like the one below:

  CSCtz42618 VIP on port 443 accepts the connection when all real servers are down

  Kind regards

  Kanwal

• Q: access to a port USB of KEIL F200

  Hello

  I am trying to find a way to access the USB ports on a Keil F200 using Java ME 3.3.1 DAAPI? I looked here; http://docs.Oracle.com/JavaME/config/CLDC/rel/3.3/Keil/GS/HTML/getstart_rtx/TOC.htm but nothing really comes out for me. What I'm trying to accomplish is attached a USB temperature probe and read the values of the probe.

  Any thoughts?

  Thank you

  Andy

  Hi Andy,.

  USB is not supported in any version of the embedded software development kit.

  / Sergey

• Provisioning of password in Active Directory and TCP ports

  Hello
  
  -I want available to users and their passwords in Active Directory
  -J' need to declare precisely what TCP ports that I use to have open in the FW:
  -TCP port if an IDM and the gateway (or server connector): 9278 (or 8759)
  -some ports between gateway and AD.
  
  Can someone tell me what ports I need between catwalk and IDM? I tried 389 and 636, but this is obviously not sufficient...
  
  Thank you.

  OK, let me tell you how it works then ;-)

  -I am speaking here of the AD adapter only, and not the connector (I'll dig this one later)
  -In the resource configuration page, you can choose the type of encryption: none, SSL, or Kerberos.

  -None:
  everything is done on the LDAP port (389) except password management which is done on port TCP 445 (Microsoft proprietary protocol)
  If 445 is blocked, no password provisioning is done and you will see the bridge trying to reach the ad on this port try ICMP (ping), then give up.

  -SSL:
  everything is done on LDAP 636. Everything.
  Why it does not work at first on my environment:
  -a been configured correctly AD? Yep: private key in the local computer AD certificate store, CA in the trusted CA on the local computer data store
  -have I forgotten to configure something on the side of the door? No, CA has been properly placed in the trusted CA on the local computer store
  -the fact that I made typo somewhere? Nope.
  -What I forgot, it is to restart the gateway service after having put the certificate in the trusted CA data store. And given that the computer does not restart for more than a month, the gateway service was not properly SSL-protocol of communication with AD...

  -Kerberos:
  I do not tried this mode. (I wanted the standard LDAP bind for some reason)

  now I can start growing hair again...