Acrobat Pro of XI on a Windows 2008 RDS Server.

Similar Questions

• Acrobat Pro 10 & 10 - "save under" windows

  I m running Acrobat Pro 10 and just installed Windows 10 - my problem is that I can't resize the window "Save as"-I want to make it smaller, but it appears full screen. Any ideas on how to make the screen smaller?  I've tried everything I can think of - anchors can be seen but I can't move re size / screen somehow.

  Hi smt93,

  Acrobat X is untested in Windows 10, so it's difficult to predict how it behaves on a platform bundles.

  I'll recommend you to use the application is a compatible platform.

  Kind regards

  Nicos

• Hi, am getting error 28000 when trying to install newly purchased Acrobat Pro DC on my PC Windows 8.1. Have tried listed difficulties, but no luck.

  Hello

  I try to install newly purchased Adobe Acrobat Pro DC on my PC Windows 8.1 but keep

  get the error 28000: the Adobe license purchase of module Installation failed. Reach...

  Help!

  Hello Kent,

  Please try the following: steps:

  > Activate the hidden on Windows 8.1 Administrator account (Ref: http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista / )

  > Disable all non-Microsoft-start Services. (Ref: http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )

  > Disable all Antivirus software like Norton, McAfee etc temporarily from the computer Mc.

  Reboot and try to install in the new active Admin user account and check again.

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• I have to install my Adobe Acrobat Pro on Mac (from previous Windows PC), so how do I do this?

  I have to install my Adobe Acrobat Pro on Mac (from previous Windows PC), so how do I do this?

  It depends on which version of Acrobat, it is.   Your license is valid only for the platform for which it was obtained.  If it is older than the latest version then it is not a lot that can be done given that platform swaps are supported only for the latest version under license.  If the time CS6 products, you may be able to request the Exchange...

  Product change or the language platform
  -----------------------------------

  You can exchange languages/platforms for a newer version product if you follow the instructions on the following link:

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Order-Product-Platform-Language-swap.htm

• Disabling RC4 encryption in the Windows 2008 SP2 Server

  Hello

  I just saw through the 2868725 Ko to disable the RC4.

  According to the article, we need to install the KB update, then we need to change the values of registry keys to disable the RC4.

  However, I could not find the download for the Windows 2008 SP2 server file in the download link

  https://support.Microsoft.com/en-us/KB/2868725

  Any suggestion how to disable the RC4 in Windows 2008 SP2.

  Need help.

  Thanks in advance.

  Here is the link for the Microsoft TechNet forum:
  http://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itpronetworking

  Several related to the server forum (not for Desktop/Win7)https://social.technet.microsoft.com/Forums/windowsserver/en-us/home?category=windowsserver

• Windows 2008 storage server shows 0 KB file size

  We use Windows 2008 storage server standard with Service Pack 2. Now we are facing the issue is Some of PDF, EXCEL, DOC files show in size 0 KB file, we are unable to open this type of file, if anyone knows pl give me the solution

  Hello

  I suggest you to ask your question on the link mentioned below that this forum is best suited for your question.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I hope this helps!

• My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.

  My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.  I find nothing in Event Viewer that shows that there is a problem.  Please let me know what to do to get the disks appears

  Original title: Network Networking file sharing file sharing file sharing file sharing discovery sharing Fileshare share shared

  Hi,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

  Hope this information helps.

• After a PtoV for a Windows 2008 R2 server, a disc is not visible

  Hello

  I just used the converter to make a PtoV for a Windows 2008 R2 server with 2 drives and the C: drive is there but the D: drive is not while there are several devices CD/DVD virtual results.

  In the converter D: drive has been cloned successfully and it is visible in the data store.

  Tahnk you for your help.

  Concerning

  Daniel

  You must check your "Disk Managment" for your disks and their mount points. HTH

• Windows 2008 R2 server slow printing

  We have about 5-6 servers Windows 2008 R2 in our virtual machine environment.  All of these servers are servers very low utilization, and they all work very well.  We have a few domain controllers, a SQL box and a few boxes of web application that is running IIS.  One of these domain controllers is a print server.  The print server works well, but it is very slow.  If you right-click on any printer that is added to any of the customers and go to properties, where the server is the management of print server, the client must wait 30 seconds or more for the upcoming dialog with the properties.  You can click between tabs, but the legs are also slow to react.

  This means that if you make changes to the print job or the margins, for example, it may take a minute of waiting between screens.

  Now, we had a physical Windows 2000 print server that has worked well until we got the VM environment, so I know the problem is in one of a few different areas.

  1. it could be the VM environment.

  2. it may be Windows 2008 R2 server config or the server software itself.

  3 might be x 64 bit cause a problem with 32-bit clients using the box.

  I have excluded #3 by a 32 bit 2008 Server on the VM environment of loading, loading of print management and then by loading a single printer and share it.  The problem is still there on the current server.  My next step is to try Windows 2003 server in virtual machine environment, but before I do, I want to throw this question very curious to the VMWare community.  All I have to do before moving on to more drastic measures?  There must be something I can do to solve the problem.

  Maybe it's the solution.  Will test:

  http://support.Microsoft.com/kb/979394

• Manager Update 4 will not scan or clean up the Windows 2008 R2 server

  I just install a Windows 2008 R2 server, and Update Manager will not analyze it.  It just says: "Failed to scan or clean up SERVERNAME because of operating system not supported or unknown.  I can scan and clean up my plain Windows 2008 servers very well.  R2 is still not supported?

  I do not remember R2 being in the list of supported operating systems, I believe that this is also the case for the 4.0u1 VUM or VUM 4.0u1.1

  You'll probably want to make sure that the release notes, but if the error message says that it is not taken in charge, probably only is not supported.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• VMware Server on Windows 2008 R2 Server Core installation

  Hi guys!

  I installed the latest version of Vmware server on our new Windows 2008 R2 Server core installation, but I have a problem with it. When I create a virtual computer and try to start the Web UI:

  General system error occurred: unable to connect to the virtual machine

  Do you know something about the nature of this message? The Server service not had access to the possuble vitrual machine? But how can it create if it doesn't have access? I have not found the log files created in the folder of the virtual machine.

  Thank you for your help.

  Kind regards

  Jeremy

  I think that Server Core is an unsupported operating system. Please take a look at http://www.vmware.com/pdf/vmserver2.pdf (page 25)

  concerning

  Jose Ruelas B

  http://aservir.WordPress.com

• Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?

  I have a PowerEdge 2850 server, that when he was initially put in place (by someone else) had Windows 2003 R2 top.  However, when they put in place, the partitioned the C: drive with so little space that it is running out of space.  We got a newer Dell server and I turned that 2850 off the coast.  It was interrupted for a month or two.

  But I would like to use it as a backup of database server.  Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?

  You need to install RAID drivers during the installation of 2008R2.

  1. Configure and initialize the RAID in the CTRL-M utility.
  2. Download and extract the drivers put on USB (or CD).
  3. Start on media 2008R2.
  4. On the screen that asks you where you want to install Windows, click on load a driver link at the bottom left.
  5. Navigate to the location of the RAID drivers.
  6. Choose the drive to install, then install.

• Update Adobe Acrobat Pro ver. 10 for Windows on MacBook Pro

  How do I update Acrobat Pro for windows version 10 for my new MacBook Pro.  I downloaded Adobe Acrobat X Pro on my Mac but when I tried to install it and put in my registration number I got a message error that says "this serial number is not valid for this product.  While Adobe Acrobat is supported by my serial number that I can use on my MacBook Pro so that I won't have to buy a new Adobe Acrobat

  Hi jamesm53330886,

  You will have to go for the purchase of a Acrobat DC, or you can also go for the upgrade to Acrobat Acrobat DC (Mac).

  However I will recommend you to first contact our customer service team to confirm. Follow this link Contact Customer Care, sign in using your Adobe ID & click on "still need help? To join us"button to throw the cat.

  Kind regards
  Nicos

• Why is the launch of Acrobat Pro XI on new computer Windows 8 does not?

  I installed the version of Acrobat Pro XI initially purchased in 2012 (and installed on a laptop XP) on my new computer Windows 8. Installation was successful; However, at the launch of the application to open an existing document or create a new document, a window opens asking for an update of the serial number and asking to choose from one of the products on the drop-down list, then by entering the serial number.  The message on top, says "Serial number not a product not qualifying."  Well, on the one hand, Acrobat Pro XI is not on the list, so I can't select it.  Only Acrobat Standard XI and others appear.

  So, what should I do to be able to open this software on my new computer?   Thanks for any clarification.   Tried the cat, but after 30 minutes of waiting, I gave up.

  The key may be the statement "eligible product. Apparently you have an upgrade version and the application is for the SN of the previous version of Acrobat. Must be at least 9 AA.

• Windows Server 2003 in a Windows 2008 file server environment

  Dear all,

  I would like to install windows 2003 server as a file server in Windows 2008 R2 domain.

  I have windows 2012 standard R2 in the additional DC form.

  Please advice me good measures implement the file server in our network.

  Tony

  E-mail address is removed from the privacy *.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.