After a PtoV for a Windows 2008 R2 server, a disc is not visible

Similar Questions

• Disabling RC4 encryption in the Windows 2008 SP2 Server

  Hello

  I just saw through the 2868725 Ko to disable the RC4.

  According to the article, we need to install the KB update, then we need to change the values of registry keys to disable the RC4.

  However, I could not find the download for the Windows 2008 SP2 server file in the download link

  https://support.Microsoft.com/en-us/KB/2868725

  Any suggestion how to disable the RC4 in Windows 2008 SP2.

  Need help.

  Thanks in advance.

  Here is the link for the Microsoft TechNet forum:
  http://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itpronetworking

  Several related to the server forum (not for Desktop/Win7)https://social.technet.microsoft.com/Forums/windowsserver/en-us/home?category=windowsserver

• Windows 2008 storage server shows 0 KB file size

  We use Windows 2008 storage server standard with Service Pack 2. Now we are facing the issue is Some of PDF, EXCEL, DOC files show in size 0 KB file, we are unable to open this type of file, if anyone knows pl give me the solution

  Hello

  I suggest you to ask your question on the link mentioned below that this forum is best suited for your question.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I hope this helps!

• Windows 2008 R2 server slow printing

  We have about 5-6 servers Windows 2008 R2 in our virtual machine environment.  All of these servers are servers very low utilization, and they all work very well.  We have a few domain controllers, a SQL box and a few boxes of web application that is running IIS.  One of these domain controllers is a print server.  The print server works well, but it is very slow.  If you right-click on any printer that is added to any of the customers and go to properties, where the server is the management of print server, the client must wait 30 seconds or more for the upcoming dialog with the properties.  You can click between tabs, but the legs are also slow to react.

  This means that if you make changes to the print job or the margins, for example, it may take a minute of waiting between screens.

  Now, we had a physical Windows 2000 print server that has worked well until we got the VM environment, so I know the problem is in one of a few different areas.

  1. it could be the VM environment.

  2. it may be Windows 2008 R2 server config or the server software itself.

  3 might be x 64 bit cause a problem with 32-bit clients using the box.

  I have excluded #3 by a 32 bit 2008 Server on the VM environment of loading, loading of print management and then by loading a single printer and share it.  The problem is still there on the current server.  My next step is to try Windows 2003 server in virtual machine environment, but before I do, I want to throw this question very curious to the VMWare community.  All I have to do before moving on to more drastic measures?  There must be something I can do to solve the problem.

  Maybe it's the solution.  Will test:

  http://support.Microsoft.com/kb/979394

• Manager Update 4 will not scan or clean up the Windows 2008 R2 server

  I just install a Windows 2008 R2 server, and Update Manager will not analyze it.  It just says: "Failed to scan or clean up SERVERNAME because of operating system not supported or unknown.  I can scan and clean up my plain Windows 2008 servers very well.  R2 is still not supported?

  I do not remember R2 being in the list of supported operating systems, I believe that this is also the case for the 4.0u1 VUM or VUM 4.0u1.1

  You'll probably want to make sure that the release notes, but if the error message says that it is not taken in charge, probably only is not supported.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• VMware Server on Windows 2008 R2 Server Core installation

  Hi guys!

  I installed the latest version of Vmware server on our new Windows 2008 R2 Server core installation, but I have a problem with it. When I create a virtual computer and try to start the Web UI:

  General system error occurred: unable to connect to the virtual machine

  Do you know something about the nature of this message? The Server service not had access to the possuble vitrual machine? But how can it create if it doesn't have access? I have not found the log files created in the folder of the virtual machine.

  Thank you for your help.

  Kind regards

  Jeremy

  I think that Server Core is an unsupported operating system. Please take a look at http://www.vmware.com/pdf/vmserver2.pdf (page 25)

  concerning

  Jose Ruelas B

  http://aservir.WordPress.com

• Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?

  I have a PowerEdge 2850 server, that when he was initially put in place (by someone else) had Windows 2003 R2 top.  However, when they put in place, the partitioned the C: drive with so little space that it is running out of space.  We got a newer Dell server and I turned that 2850 off the coast.  It was interrupted for a month or two.

  But I would like to use it as a backup of database server.  Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?

  You need to install RAID drivers during the installation of 2008R2.

  1. Configure and initialize the RAID in the CTRL-M utility.
  2. Download and extract the drivers put on USB (or CD).
  3. Start on media 2008R2.
  4. On the screen that asks you where you want to install Windows, click on load a driver link at the bottom left.
  5. Navigate to the location of the RAID drivers.
  6. Choose the drive to install, then install.

• My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.

  My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.  I find nothing in Event Viewer that shows that there is a problem.  Please let me know what to do to get the disks appears

  Original title: Network Networking file sharing file sharing file sharing file sharing discovery sharing Fileshare share shared

  Hi,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

  Hope this information helps.

• Problem of ThinApp IE9 for Windows 2008 R2 Server Citrix

  Hello

  I'm trying to make a package for IE9 I'll be able to run on Server 2008 R2 running Citrix 6.5

  so I made this package by installing a windows 7 ent vm workstation and I capture the IE9

  now on this virtual machine with windows 7, this package work very well and also on my pc running windows 2008 R2 it also work correctly

  but when I try to run on no matter which of my new citrix servers open IE9, and then it shows this error popup:

  "A display problem (page name) caused Internet Explorer Refresh the Web page.

  and then freeze IE9. (this happen for IE9 32-bit and 64-bit, my servers are all 64-bit)

  now, I'm working on it for a week now and I have googled all the net and I found every article I can find on this error

  and I have tried everything with no success

  now, the only difference between my PCs running on windows 2008 R2, and Citrix servers are that my pc is a physical pc running Intel i5

  and all my citrix servers running on Vmware esxi 5.1 platform and I don't put all windows update install on my pc and I have Citrix install all updates from Microsoft.

  So it can be a hardware problem in the context of the article I found say that it may be related to the video card driver, but if this is the case how it works on the virtual machine with windows 7 running on the same server esxi

  and it can also be an update from Microsoft that makes this problem or it may be something that I don't think and that I need your help

  the IE9 which are installed on my citrix server run ok and there I have no problem but the IE9 in the package I build gives me this error

  one more strange thing is that in my package I didn't enter any home page and when I run this package it take home page I put in the local server as my homepage

  I also build a package for IE7 and present a work very well and there it didn't happen for me that the homepage on the server has been set as my package's home page.

  now, I'm trying to build this package as insulated and uninsulated and it made no difference regarding my problem, or to the homepage that originate from the local server.

  so I need some help here, and I need it ASAP

  Thank you

  Your

  Tamir

  Hello

  I found the cause of my problem, after all the test I did has been updated to Microsoft KB 2670838

  who get the users name in the net as the WRONG UPDATE

  See here: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/kb-2670838-the-evil-update/08bfdb2b-6896-4c34-89c2-16896a25dc3d

  After I remove this update that are not at all necessary and is also define who you just have it as a prerequisite for upgrading IE to version 10

  IE9 begin to work my package.

  So if someone of you will have a problem with IE9 and time does take to load pages remove this update.

  Tamir

• Windows 2008 R2 Server error Stop 7B after Bare Metal Restore of VM.

  I tried to make a bare metal restore of a physical server Windows 2008 R2 on a virtual computer, and although restoration is fine, when I restart the virtual machine after the restore, I get a STOP: 0x0000007B (see screenshot) error.  I was able to find all kinds of '' correction '' online, but none really solve the problem.  Someone at - it else done this and can provide a solution?  Thank you.

  LSU

  As for your suggestion concerning the audit of the controller and then using vSphere converter, do you want to say I point the converter on the VMDK 'broken' and choose a Machine configuration option?

  What you can do with VMware Converter, is to run the Machine "set up" against the power off VM (simply select the virtual computer after connecting to the host or vCenter). I mentioned to check the controller before doing this, because this controller is the default configuration for the operating system you use.

  André

• shows am improve ready system me ready start Hello, after installing "Setup for the windows modules" my pc one slowed down at the start. That do I do? Thank you.

  Hello, after installing "Setup for windows modules" my pc one slowed down at the start. That do I do? Thank you.

  Hello Turkish styleozdemir.

  The forum in which you've posted is for English only. Please select your language by clicking on the globe on the page down to the left to post your question in the language of your choice. If you can't find the desired below language, support for additional international sites options are by following the link below:
  http://support.Microsoft.com/common/international.aspx
  Thank you!

• Start the virtual machine and wait for WF, does not connect to the computer virtual for Vds (Windows 2008 R2)

  Hello

  See a strange problem with only a Windows 2008 R2 model. When you use the built-in function "Start VM and wait" workflow to start a virtual machine (after conversion from a template either manually, or through workflow) NIC of the virtual machine (I tried VMXNET3 and e1000 times) does not connect to the problem. Vds can be replicated in a different VCenter, so spreading the vds. I also created several models of Windows 2008 r2 and all have this problem.

  If the model is converted and started outside VRO, it gets an IP from and is connected to the VDS immediately

  Tried add/remove the NIC of the model

  Tried to move the comments on different hosts

  Tried to create a new template from scratch

  NOTE: Windows 2012 R2 doesn't have this problem in the same circles, the only constant is the Windows 2008 R2 being started by VRO.

  Anyone seen this before?

  I found this article and it fixed my problem VMware KB: registration or the deployment of a virtual computer model fails apparently a fix a problem in ESX 5.1, 5.5 (I used the option to get around and things are good)

• Can't seem to find the native oracle 32-bit cleint for a Windows 2008 64 bit op

  Hello
  
  We have a Windows 2008 (64-bit) server and that you have installed oracle 64-bit client out there.
  
  Have a third-party application which is usggesting also need a client native 32-bit oracle.
  
  Peeked on otn but can't seem to find. For 64-bit operating systems can't see oracle 64-bit client.
  
  Ideas/links appreciated.
  
  Thank you

  user5716448 wrote:
  that is, no client 32-bit for the client operating system 32 bit and 32-bit operation for 64-bit operating system?

  There is no client 32-bit for the 64 bit OS, use standard 32-bit client on 64-bit operating system.

• Why Windows 2008 R2 Server Foundation has received limited permissions?

  I install a software of SAP on a Microsoft Windows Server 2008 R2 Server (Foundation Edition) on a HP Proliant server.

  The installation fails to access to the registry key 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servi '.

  The exact error message is "unable to open silsvc. An error prevents opening this key. Details: access denied. »

  When to use REGEDIT. EXE to display the registration key, it reports that access is denied to view properties (not to mention changing permissions).

  Why this registry key entry is locked against the administrator?

  What can I open as long as the user TrustedInstaller?

  Alternative workaround?

  Concerning

  Joe Oppenheim

  Hello joppenheim,

  You question would best address in TechNet for the Windows Server 2008 forum.
  Click here for a link to transfer your question in the TechNet forum.

  They have Windows Server experts who will be able to help with your problem.

  Thank you

  Marilyn

• Reg: configuration of mail in windows 2008 srever Server

  I have install or configure the mail server in windows server 2008. I have to configure the mail server and to create user accounts.

  can you please provide me with any documentation available for the same thing.
  : Hp ml110g7 Server
  OS: Windows 2008 Server

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Server and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

  I hope this helps.