Acrobat Pro XI presents during the creative application but is not?

Similar Questions

• I bought Acrobat Pro DC and followed the instructions download, but cannot find the link for the download. Help, please!

  I bought Acrobat Pro DC and followed the instructions download, but cannot find the link for the download. Help, please!

  Have you checked with link below?

  Download Adobe Acrobat products. Standard, Pro | DC, XI, X

• Video uploads to the creative cloud but can not open it? And wrote of zero byte

  Video uploads to the creative cloud but can not open it? And wrote of zero byte

  You download the file using file synchronization or the use of the active site CC to https://assets.adobe.com? Which shows Details Panel? It should show the size.

  For example:

  

• HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

  HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

  Work tried fixing it but all attempts fail.

  Firewall disabled.

  Printer recognizes the router's LAN.

  Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

  Printer does not print.

  How can I fix?

  Hi @AnnisMonadjem,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  When you say 'LAN', are you referring to the network or you try to share the printer on the network?

  How is the printer connected? (Ethernet/WiFi)

  If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  HP has several Officejet Pro 8600 series.

  What is the name and the product number of your printer? How can I find my model number or product number?

  • Update the firmware of the printer.
  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

  • Try printing and scanning.

  In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

  Continue on, if the problem persists.

  Important!   Delete the temporary files and folders by using the disk cleanup utility

  1. Open the disk cleanup utility:

• I bought Adobe Acrobat Pro XI through Dell, the it - installed but the Basic program starts not even - the only thing I can do is open the forms - I'm tired of working with foreign personnel to solve my problems can someone seated?

  1. Last week I bought Adobe Acrobat Pro XI - it does not work - I can access the forms - but I can't access the Basic program - reps tech worked on it for a long period of time last week and now I can't even open the Basic program.  Frustrated

  
  

  2 weeks as my hard drive (XPS18) locked Windows me - I could not go to a restore point, I couldn't do anything.  So I had to start from scratch - re-load the operating system - windows 8.1 Pro 8.1.  Then it is time for reloading MS Office 2013 - I got my Dell/MS product key - but had to get involved Microsoft (do whatever they did) to allow me to put it back in my current product key.  All resolved, then is the time to go to my Adobe product - I've contacted Dell and I shared the purchase and shipment showing slip $ 299.00 for the Adobe product.  I assumed that it is in my digital library - I could not find any digital library - so I called the customer support number (Overseas) and they couldn't help me.  Bottom line, I paid for an installed electronic product and don't have no way to access to re - load.  After several days and calls - I am at my last appeal on October 23 in the morning - bottom line the tech rep could not find any information on my Adobe product.  In order for me to get my business online, I ended up buying another Adobe product price still an another $ $299,00.  Yes, it was a new version of what I had, but again he did have to pay full price, even if it's an upgrade, then after installation, integration, and the Fund - I asked for documentation for the Adobe product and the license key.  He said "do not worry about this, all you have to do is call the customer service number and we will help you" - well this isn't enough for me - because you can see above what happened earlier and I am complete was dissatisfied with the results.   I've been a long-time buyer/user and believe in the Dell product - but the service the customer to your loyal customers really sucks!  As a consumer of your product (s), all that I pay because I should receive the required documentation, the numbers of license and any information related to that hardware, software and firmware - I should have a way to access.

  Thank you

  Gene Davenport

  Hi gdavenpotx,

  No more, Adobe provides Acrobat XI, seems that you purchased from a dealer.

  Please run this tool cleaner uninstall all previous installer Acrobat Download Adobe Reader and Acrobat tool - Adobe Labs, retsrat your system & reinstall it using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X.

  Activate by using the serial key provided to you. If the serial key still does not work, please contact your Acrobat reseller.

  Kind regards
  Nicos

• Initialized the planning application, but can not see business rules (scripts).

  Hi all
  
  I'm new to Hyperion and would greatly appreciate your help. I created a classic application planning White (11.1.1.3) and initialized Capex planning (Edition-> initialize capex), then created and updated database so that it appears in Essbase too. I can see the application in essbase and planning, I see the forms of data and dimensions, formula member... etc. When I opened a data form it shows me downstairs left business rules and that I can run them and select execution prompts. But when I go to the calculation Manager and select the same application, see the actual scripts, how it is designed (essentially wants to learn scripts are created, calculation and all functions) under the rules and scripts, I don't see scripts anywhere. I have tried this 4 - 5 times by creating charges new application (I also tried the workforce planning and the same problem) with a plan type, more than 1 type of plan but its market not now. Can someone please help me from your experience what could I be missing and why his watch now.
  
  Thank you for your help in advance.
  
  Published by: 974509 on December 3, 2012 18:14

  Should have displayed the Manager queries calc in calc forum (https://forums.oracle.com/forums/category.jspa?categoryID=519)
  If you right click the application node in the Manager of calc, have you a menu to load rules presets?

• Premiere Pro CS6 is listed in the creative cloud but can not use it.

  How you use Premiere Pro CS6 trial that is listed as download under creative cloud?

  Premiere Pro CS5 version is ONLY for a 64-bit computer

• I am trying to download acrobat pro dc creative use of clouds packer. It fails every time. It seems like PAC and do the package, but then when I try to install (acrobat pro dc) nothing happens. Installation starts but there is no dc pro acrobat installs

  I am trying to download acrobat pro dc creative use of clouds packer. It fails every time. It seems like PAC and do the package, but then when I try to install (acrobat pro dc) nothing happens. Installation starts but there no acrobat pro CD is installed.

  Hi Pavle,

  The installer for Acrobat is different from the rest Cloud Creative applications that is why when you create a package by using Creative Cloud Packager, there are two folders created:-

  (1) build-->> all upward for all Applications of Cloud Creative except Acrobat.

  (2) exceptions-->> Contains for Acrobat and the Muse.

  You will need to install Acrobat first through the Exceptions folder. Select the option to install as a trial or a subscription.

  Then install the creative rest of Cloud applications through generation file, it will install the applications and your copy of Acrobat license also.

  I hope this helps!

  Thank you

  Tanvi

• I bought Acrobat Pro DC and he says I have to download creative cloud, but I won't.  Is not just Adobe Acrobat Pro available with on the cloud?

  I can challenge the credit card and try again.  We bought this software before but it says the key that I just bought does not work and the help desk said I need creative cloud but I don't want creative cloud.

  You bought perpetual Acrobat Pro DC, please use the following link to download it.

  Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Concerning

  Stéphane

• InDesign only will launch properly through the creative application of Cloud

  Windows 10, InDesign CC 2015.4.

  I was happily using InDesign yesterday and is working on a large file from a remote server. All idle so an analysis it was unusable and I started having funny behaviours, such as not being able to select things. I finished by force he leave via the Task Manager. Since then, every time it loads, it will access interface but then freeze: do not click on menus, the window does not respond: just frozen (However the window never come with "No answer" as you would expect). Only way is to kill him via the Task Manager.

  A ctrl + alt + shift reboot several times, not good. Finally, I uninstalled, then reinstalled. Same thing. Abandoned during the day and I am now at home. Tried to uninstall and reinstall again and again the same thing. However, because I had the creative application cloud opening instead I clicked "Open" app. It opens up very well and I was able to work. Quit smoking, has launched from the taskbar, recent applications and by double-clicking InDesign.exe (all three are essentially the same thing) and I get a window does not respond. Open again via the app and no problem.

  Tried starting secure, and it works little matter how I try to launch it.

  Booted up normally again, no dice. I disconnected (e) Creative cloud before embarking to see what would happen. Launched inDesign and he has popped up with the Application Manager asking me to connect. Has done this, then the Application Manager stops on "wait a moment" with the spinning wheel indefinitely until the window had finally "not responding" in the title bar. Had to kill with task again Manager.

  So, can someone help me out here? Only other thing I can think is to uninstall all apps CC then the Manager app CC itself, but all my other apps seem to well (well, Illustrator and Photoshop are, in any case).

  I managed to do remove my recently given admin rights. Restarted, and CC apps seem to work fine now. Why this should affect things, I don't know. However, I enjoy once more being able to navigate to an InDesign file, double-click it and opened it.

• I have a subscription of CC photo by using photoshop and lightroom.  I own Acrobat Pro XI.  My desktop creative cloud app keeps saying to update Acrobat DC?

  I have a subscription of CC photo by using photoshop and lightroom.  I own Acrobat Pro XI.  My desktop creative cloud app keeps saying to update Acrobat DC?  I am not a subscriber to the DC?

  Hi ChiefLar ,

  I would like to inform you that you're not subscribe to the Acrobat DC as is the latest version of the Acrobat program & as you XI Acrobat Pro & Cloud membership for photoshop & lightroom, you keep getting the message to upgrade to Acrobat Pro DC (latest version). If you have Acrobat Pro XI subscription, then you can also install the latest version that is Acrobat Pro DC.

  If you XI Acrobat pro as serialized product then you must buy Acrobat Pro DC as improved version.

  Kind regards

  Christian

• How to get started using offline file "acrobat_reference.pdf" from in Acrobat Pro DC, preferably in the Help menu?

  How to get started using offline file "acrobat_reference.pdf" from in Acrobat Pro DC, preferably in the Help menu?

  You create a JavaScript script like this.  It has two platforms, but available in JavaScript, but I have commented out the windows because it's from my Mac.  Also note that I've hidden the menu default Acrobat help item in this JavaScript.

  /************************* Hide Menu ********************************/

  Hide the default Help menu

  app.hideMenuItem ("HelpAcrobat");

  / * Menus execution * /.

  app.addMenuItem ({cName: 'Adobe Acrobat help PDF', cParent: 'Help', cExec: "fTDocs1()", NPO: 0});

  /***************************** Functions ************************************/

  Note: The ' / C/Program Files/Adobe / ' convention was used to conform to the

  SDK Adobe format but the installer does not you may need to

  Change the path to your system.

  Mac OS X

  function fTDocs1()

  {app.openDoc ("/ Applications/Adobe Acrobat XI Pro/Help/acrobat_reference.pdf") ;}} ;

  This section is commented

  64-bit Windows

  function fTDocs1()

  {app.openDoc("/C/Program Files (x 86) / Adobe/Acrobat DC/Acrobat/Javascripts/acrobat_reference.pdf') ;};}

• How to specify the language in the creative Application of cloud

  When I connect the first time in the creative application Cloud, the default language is set to the language of my system. But the license for my application are in a language other than the language of my system.

  We currently have 10 licenses, but when you buy more, I don't want to change the language preference for each user on each computer to match our current license. Is there a way to offer the installation program (given that the ccp does not) to specify the language so users do not have to do it manually.

  Since it is userbound and when a user connects, it is kept in the registry and if I change my language system subsequently, this setting is retained.

  I am looking for a way own (rather not use active setup) to install the creative cloud application and indicate the language of the App (in our case, we have English-International licenses) rather than when users logs on and gets the language of the (Dutch) system, for which no application is allowed.

  Thank you for your reply... but read the full summary next time please...

  For others who have the same problem, I thought about it out now:

  (1) the language selected in creative cloud Packager is not the creative, only for applications cloud application that you pack

  (2) the creative language of the Cloud App is defined by the language of the operating system... it has nothing to do with the creative cloud conditioner

  (3) when the creative application of cloud starts in a specific language... only the packages installed for that language are detected

  (4) If you want to change the language of the creative application of cloud and you had packages installed under the previous language, you must download (or install) again in the colloquial to be visible / editable again in the colloquial

  For me, this means:

  option1: present applications in Dutch (since all the CC for teams applications are multilingual)

  option2: I inform all users (or use active setup or any other alternative) to change manually the language to English... otherwise no package is visible

• With the help of VBA - check to see if Acrobat Pro is open on the computer of the users

  Hi all. I have an access request that generates a lot of single page PDF reports in a folder on the user's computer, then when it's over, it combines all files in a single pdf file on the desktop of users. If the user has left open Acrobat Pro before it begins to run reports, when it starts to try to combine the files, he will receive an error message.

  I would check if Adobe Acrobat Pro is open from the beginning of the routine, so that the user doesn't have to spend as much time regenerating reports yet. I was not able to find the VBA code that will do this. Can anyone help?

  Thank you

  David

  Hello test screen name. I do catch the error and generate a friendly error message to ask the user to close Adobe Acrobat. The problem is, according to the criteria they choose for the report, it might take 5-10 minutes before you still see this error because of the hundreds of individual reports pdf it takes to generate. It is not until my code is ready to combine these pdf files they see the message. So, it is not really an error of execution, so to speak.

  But, I found the answer to my question and I wanted to share with everyone. The answers are found here:

  API: Whether an application is running

  API: Get the class name of a running application

  What I did, is to paste all of the code in these 2 pages in a new module of access. Then I made sure that Adobe Acrobat is loaded on my machine. I ran the fEnumWindows() void and it printed all my open programs class names. I got the class name for Adobe Acrobat, which is AcrobatSDIWindow. Then, I modified the select case statement in the following function, to include the Acrobat of the string and the name of the class:

  [code]

  Function fIsAppRunning (ByVal strAppName As String _

  Optional FActivate As Boolean) As Boolean

  Dim lngH As Long, strClassName As String

  Dim GNLX As Long, lngTmp As Long

  Const WM_USER = 1024

  On Local Error GoTo fIsAppRunning_Err

  fIsAppRunning = False

  Select Case LCase$ (strAppName)

  Case "excel": strClassName = "XLMain".

  Case "word": strClassName = "OpusApp".

  'Access' box: strClassName = 'Omain '.

  Case "powerpoint95": strClassName = "PP7FrameClass.

  Case "powerpoint97": strClassName = "PP97FrameClass.

  Case 'Notepad': strClassName = "Notepad".

  Case 'acrobat': strClassName = "AcrobatSDIWindow."

  Case "wordpad": strClassName = "WordPadClass."

  Case Else: strClassName = vbNullString

  Select end

  If strClassName = "" then

  lngH = apiFindWindow (vbNullString, strAppName)

  On the other

  lngH = apiFindWindow (strClassName, vbNullString)

  End If

  If lngH <> 0 Then

  apiSendMessage lngH WM_USER + 18, 0, 0

  GNLX = apiIsIconic (lngH)

  If GNLX <> 0 Then

  lngTmp = apiShowWindow (lngH, SW_SHOWNORMAL)

  End If

  If fActivate then

  lngTmp = apiSetForegroundWindow (lngH)

  End If

  fIsAppRunning = True

  End If

  fIsAppRunning_Exit:

  Exit Function

  fIsAppRunning_Err:

  fIsAppRunning = False

  CV fIsAppRunning_Exit

  End Function

  [/ code]

  Now I can just send 'acrobat' this function to see if the application is open.

  Sincerely,

  David

• Satellite Pro A110 crashes during the transfer of the large data in LAN

  Hello

  My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

  Thanks in advance

  Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

  Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?