Acronis image for VMware
- My laptop is Windows 7 with a 120 GB drive used 30%
- My home computer is a mac running Mountain Lion.
Eric
VMware Workstation cannot read images of Acronis but normal against V.Mware Converter knows to turn them into VM. Versions of Acronis supportati pour here are: Acronis True Image Echo, 9.1, 9.5, and Acronis True Image 10.0, 11.0 (home product).
Eric
Tags: VMware
Similar Questions
-
Reference Dell Custom Image for Vmware ESXi 5.1
Hello
where can I find the custom image Dell for ESXi 5.1.
I can only find the ISO Images for 5.0 (4.1). But none for 5.1. Unfortunately the original ISO Vmware image will not work because it does not find a NETWORK card in my Dell R420. Which seems to occur as long as the original image from Vmware does not include the card driver NETWORK Dell to the R420.
I saw that today there is a download section at support.Dell.com for ESXi 5.1 with about 36 files to download. But no ISO Image for ESXi 5.1 as it is 5.0 and before.
Hope someone can help or knows how Dell will bring the custom image.
Thank you!
Here is the link to the ISO image of the ESXi 5.1 custom newly released Dell. Sorry for the delay to everyone - out www.dell.com/.../poweredge-r620
-
Debian 5.0 kvm image for vmware «unable to detect disks or volumes...» »
Hi all
I'm trying to convert a KVM node running Debian 5.0 to a vmdk image.
When I do this, Linux (4.0.1) or Windows (4.3), I get the following error:
Cannot detect disks or volumes on the source machine. Please ensure that the source is a Linux Distribution supported
I have attached the logs complete, but here is the output of a few orders and relevant newspapers. I hope someone can help me.
Thanks for any help that you could provide!
# df h
Size of filesystem used Avail use % mounted on/ dev/vda1 4.7 G 2.9 G 1.6 G 66%.tmpfs/lib/init/rw 0% of 250 M 250M 0udev 10M 608K 9.5 M 6% / devtmpfs 250M 250M 0 0% / dev/shm# mountvda1/dev/on / type ext3 (rw, errors = remount-ro)tmpfs on/lib/init/rw type tmpfs (rw, nosuid, mode = 0755)proc on/proc type proc (rw, noexec, nosuid, nodev)Sysfs on/sys type sysfs (rw, noexec, nosuid, nodev)procbususb on/proc/bus/usb type usbfs (rw)udev on/dev type tmpfs (rw, mode = 0755)tmpfs on/dev/SHM type tmpfs (rw, nosuid, nodev)type devpts on/dev/pts devpts (rw, noexec, nosuid, gid = 5, mode = 620)# ls-l/dev/vd *.BRW - rw - 1 root disk 254, 0 on 12-03 - 2011 00:22 / dev/vdaBRW - rw - 1 root disk 254, 1 2011-03-12 00:23 / dev/vda1BRW - rw - 1 root disk 254, 2 12-03 - 2011 00:22 / dev/vda2BRW - rw - 1 root disk 254, 5 12-03 - 2011 00:22 / dev/vda5BRW - rw - 1 root disk 254, 16 on 13-03 - 2011 12:13 / dev/vdbBRW - rw - 1 root disk 254: 17 on 13-03 - 2011 12:14 / dev/vdb1# fdisk-l
Disk/dev/vda: 5368 MB, 5368709120 bytes
255 heads, 63 sectors/track, 652 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00072c02
Device boot start end blocks Id system
/ dev/vda1 * 1 617 4956021 83 Linux
/ dev/vda2 618 652 281137 + 5 extended
/ dev/vda5 618 652 281106 82 Linux swap / Solaris
Disk/dev/vdb: 1073 MB, 1073741824 bytes
16 heads, 63 sectors/track, cylinders of 2080
Units = cylinders of 1008 * 512 = 516096 bytes
Disk identifier: 0xb30fe87f
Device boot start end blocks Id system
/ dev/vdb1 2080 1 1048288 + 82 Linux swap / Solaris
# cat/etc/fstab
# / etc/fstab: static file system information.
#
# < file system > < mount point > < type > < options > < body > < pass >
proc/proc proc defaults 0 0
/ dev/vda1 / ext3 errors = remount-ro 0 1
/ dev/vda5 none swap sw 0 0
/ dev/hdc/media/cdrom0 udf, iso9660 user, noauto 0 0
The corresponding section:
[#4] [2011-04-15 21:47:14.977 F079AB70 error 'App'] Caught by converter Agent SysinfoQuery log file; result: [2011-04-15 21:47:26, 446 INFO storage]: probe for disks using parted
[#4] [2011-04-15 21:47:26, 446 INFO storage]: Parted device returned with path: / dev/vda, type: 0
[#4] [2011-04-15 21:47:26, 446 INFO storage]: device not supported by path to jump: / dev/vda, type: 0
[#4] [2011-04-15 21:47:26, 446 INFO storage]: Parted device returned with path: / dev/vdb, type: 0
[#4] [2011-04-15 21:47:26, 446 INFO storage]: device not supported by path to jump: / dev/vdb, type: 0
[#4] [2011-04-15 21:47:26, 446 ERROR storage]:!
[#4] [2011-04-15 21:47:26, 446 ERROR storage]:! Could not recognize any disks!
[#4] [2011-04-15 21:47:26, 446 ERROR storage]:!
[#4] [2011-04-15 21:47:26, 446 WARN storage]: unable to execute lvm commands, none of the groups of LVM volumes or logical volumes will be detected
[#4] [2011-04-15 21:47:26, 446 INFO storage]: Got to climb the table entry: fsname: / dev/vda1, dir: /, type: ext3
[#4] [2011-04-15 21:47:26, 446 INFO storage]: device with 254 major and minor search 1
[#4] [2011-04-15 21:47:26, 446 INFO storage]: Got to climb the table entry: fsname: tmpfs, dir: / lib/init/rw, type: tmpfs
[#4] [2011-04-15 21:47:26, 446 INFO storage]: Got to climb the table entry: fsname: proc, dir: / proc, type: proc
[#4] [2011-04-15 21:47:26, 446 INFO storage]: Got to climb the table entry: fsname: sysfs, dir: / sys, type: sysfs
[#4] [2011-04-15 21:47:26, 446 INFO storage]: Got to climb the table entry: fsname: procbususb, dir: / proc/bus/usb, type: usbfs
[#4] [2011-04-15 21:47:26, 446 INFO storage]: Got to climb the table entry: fsname: udev, dir: / dev, type: tmpfs
[#4] [2011-04-15 21:47:26, 446 INFO storage]: Got to climb the table entry: fsname: tmpfs, dir: / dev/shm, type: tmpfs
[#4] [2011-04-15 21:47:26, 446 INFO storage]: Got to climb the table entry: fsname: devpts, dir: / dev/pts, type: devpts
[#4] [2011-04-15 21:47:26, 446 INFO storage]: statistics for swap device/dev/vda5
[#4] [2011-04-15 21:47:26, 446 INFO storage]: Swap device/dev/vda5 has the device of block (major, minor) number: (254,5)
[#4] [2011-04-15 21:47:26, 446 INFO storage]: statistics for swap device/dev/vdb1
[#4] [2011-04-15 21:47:26, 446 INFO storage]: Swap device/dev/vdb1 has the device of block (major, minor) number: (254,17)
[#4] [2011-04-15 21:47:26, 446 ERROR storage]:!
[#4] [2011-04-15 21:47:26, 446 ERROR storage]:! Could not recognize all volumes!
[#4] [2011-04-15 21:47:26, 446 ERROR storage]:!
[#4] [2011-04-15 21:47:26, 446 ERROR storage]: could not find a startup directory (searched "/ boot"); the final system may not be bootable
I doubt that Converter knows what are virtuio block devices.
I guess I would install a new virtual machine from scratch and just move the data -
Free BSD for VMWare Virutal Machine image
Hello everyone
This is my first post in any VMWare community forum and I would advice to take advantage of ready-made virtual machines available on the FreeBSD site:
ftp://ftp.freebsd.org/pub/FreeBSD/releases/VM-IMAGES/10.2-RELEASE/amd64/Latest/
This page from the same site indicates the hard image for VMWare, but my last copy of VMWare Workstation 12 player accept files .vmx or .vmc - not hard:
ftp://ftp.freebsd.org/pub/FreeBSD/releases/VM-IMAGES/README.txt
Is this mean that hard images can be loaded into other paid products VMWare?
I look forward to receiving tips.
Thanks in advance
Ah, you use the drive, I just read the part of the workstation
OK, so, here we have to work around the problem. Create a virtual machine, the select part to store the disk in a single file and not split disc.
When you create, delete the newly created hard.
Copy the VMDK you downloaded from the website of bsd in the VM folder and rename the hard on behalf of the deleted vmdk.
Tim
-
VmWare Workstation 7.1 - Unable to P2V and seems does not support disk Acronis image images
Hello.
I'm trying to convert my computer into virtual machine using the Conversion Wizard in the VMware Workstation 7.1.
My hardware is: Intel Core i7-920/6 GB of RAM/2x0.5Tb HDD/ATI HD4800. OS = Windows 7 x 64 Ultimate.
I need to convert only 1 partition on disk 1 which has the OS and all S/W installed. The partition size is 150 GB allocated space = 72G, before the conversion has been defragmented and check-disked (chkdsk/f).
The location of the target is a 'new virtual machine', located on a huge USB - HDD (K:\VM\vmWsXxx-WI7\), of course - I have access to all drives and places, and of course - there is enough free space on the target disk.
The problems:
(1) when I am trying to convert all the timeI'm getting the"failed to take.
Instant error message of the volume of the source. In a log file I also see this message - "Vsnap didn't"admin rights.
Purpose (!) I am connected with a user who belongs to a local "Administrators" group. And 'VMware Agent Service' service is running on the same user account. So, I guess - it must be enough to make Vsnap has all the permissions it needs! :-\
(2) I also tried another way of P2V - I created a disk image of my partition with an Acronis True Image Home 2010 and tried to put this file to disk image as the source for the conversion of VmWare Wizard. But he reportedthe error - 'file may be corrupt or format not supported ". Makes me think that there might some bugs - in Acronis image that makes the supporting incompatible disk images or VmWar!
My question is - HOW to with SUCCESS CONVERT MY COMPUTER to VM using a VmWare Workstation 7.1 or any other tool?
Sub question is - why declare VmWare disk support Acronis image images but does not in a real?
Or (if it supports their) there may be an incorrect error message - "file may be corrupt or format not supported". Maybe he should point out something else.
What I tried:
ensured all need services began a) this:
net start
UFAD-ws60
net start "tcp/ip netbios support.
net start swprv
net start vss
(b) I run shell commands - "writers vssadmin list,"vssadmin list shadows"- the two commands work fin, so assume VSS working properly."
(c) have tried to run this long shell script
CD %systemroot%\system32
net stop vss
net stop swprv
regsvr32 ole32.dll
regsvr32 vss_ps.dll
vssvc /Register
regsvr32 /i swprv.dll
regsvr32 /i eventcls.dll
regsvr32 es.dll
regsvr32 stdprov.dll
regsvr32 vssui.dll
regsvr32 msxml.dll
regsvr32 msxml3.dll
regsvr32 msxml4.dll
BTW, I got a lot of error messages about this script:
The module "swprv.dll" was loaded but the call to DIIRegisterServer failed with the error code 0 x 80070715.
The module "eventcls.dll" was loaded but the call to DIIRegisterServer failed with the error code 0 x 80070715.
The "es.dll" module has been loaded but the DIIRegisterServer entry point was not found.
Make sure 'es.dll' is a valid DLL or OCX file and try again.
The "vssui.dll" failed to load module.
The "msxml.dll" failed to load module.
The "msxml4.dll" failed to load module.
-
Best Linux o/s to be used for VMWare Server 2
Hi guys,.
What would be the best Linux o/s to be used for VMWare Server 2 and why?
Are there known traps or other questions that you may have experienced with some operating systems.
Thanks for the comments.
I don't know about the 'best' that I only use openSUSE x 64 but I find it incredibly stable and reliable, especially when compared to a lot of Vista (out of production). Image single with 8 GB disks and non - RAID SATA with usually about 10 virtual machines running constantly. CentOS and Ubuntu seem to appear a lot here, but that could be wrong, since people in general do not post when things are working very well. Fedora seems to have arisen recently with more than its share of problems.
---
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
-
I have blocked the images for the site how to unlock the
I clicked block images for khanacademy.org and when it loaded a new page all images where gone and how I got to the window that locked was I clicked on an image and one of the options but now there are only two!
You can control and manage permissions for the domain in the tab currently selected through these steps:
- Click the address bar onthe Site identity button"(globe/lock)
- Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
- Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab
You can control and manage permissions for all areas on the Subject: authorizations page.
You can check the "tools > Page Info > media ' for blocked images
- Select the first link of the image, and then use the cursor key to scroll the list.
- If an image in the list is grayed out and 'block Images of..."is checked then uncheck this box to unlock pictures of this area.
-
Improved image for GeForce 7600 on Qosmio G30-188?
In my "new" G30-188 manual, there is a picture with a menu called Toshiba improved image for Geforce 7300 on page 8-31. It is described that you can change the settings for the video and the TV picture. But on my G30-188, which has the GeForce 7600 I Don t find any menu picture Toshiba development.
Can anyone?
The 7300 in some machines and this section applies to this. There is no tool for improving basic windows for the 7600 (I have one in my Qosmio) but you can change the settings in the Qosmioplayer by going in the configuration screens (F1 or F2 I think.
Hope this helps
-
USRP RuntimeError: Please update the firmware and FPGA images for your device.
Hello
I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.
2009 LabVIEW and NOR-USRP 1.1
When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627
"niUSRP Devices.vi find
a length or configuration error has occurred."
Code: 1440
Details: RuntimeError:
Please update the firmware and FPGA images for your device.
See application for USRP2/N-Series notes for instructions.
Compatibility of the Protocol expected number [7-11], but received 12:
The version of the firmware is not compatible with the host code generation. »I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.
Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.
Can someone help me with this problem please?
With respect,
-Sigurd has.
Hello Sigurd,
The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.
You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.
This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP
-
I can't load up a book cover of my images for a web site request form
I can't load up a book cover of my images for a web site request form. Is there a method to do this?
Hello
This can depend on the configuration of the web site form. If can accept only text, may have a limit on the maximum characters lol, etc. Some Web site forms do not accept entries stuck, just live by typing.
I suggest you contact the website for advice.
-
I have a Toshiba L850 and try to mount an image for the background. Have you tried the resolution of the screen to pull the lever, but still does not. Can someone go through the steps for me please.
Hi June,
What version of Windows is installed on the computer?
The articles below show you how to change the background image and set the Position of the image in the Center that it adjusts automatically on the screen.
Items are for Windows 7 The steps are similar to Windows Vista and Windows 8. However please let me know what version of Windows is installed on the computer and I'll give you the steps for this operating system. When the computer restarts, you'd be able to see the name.
http://Windows.Microsoft.com/en-us/Windows7/change-your-desktop-background-wallpaper
http://Windows.Microsoft.com/en-us/Windows7/change-your-desktop-background
I hope this helps. Get back to us if you need more help.
-
How can I use a JPEG file as a background image for my vi to 8.5
Im working on a vi that I intend to help as part of an alarm system. I would use a JPEG file of my house as a background image for the vi, or possibly to just display in a window on the control panel. I've seen people use their own images before, but never looked at what it was.
Im trying to use the 'read JPEG' file vi and the flattened pixmap 'draw' vi to achieve this. The vi works, but nothing shows up on the front panel. If I try to create a "new image" flag out of the flattened pixmap 'draw' vi, I get a blank white window on the front panel.
Any advice?
Thank you
The image could be there just not to come to the right place in the image control. What is the control relative to the image? Must be a JPEG file or can you just copy as a bitmap to the Clipboard and paste it on the front panel? Can you put a photo and the unworking VI?
-
Problems in using images for screensaver - error preventing the slide show
original title: problems in using images for screensaver
I always enjoyed using my photos for a screen saver. Now, I get the message "an error prevents the slideshow to play." How can I find and fix the error?
Hello
Did you change your computer?
I suggest you to follow the steps and check
a. go to
C:\Users\ \AppData\Local\Microsoft\Windows Photo Gallery\Pictures.pd4
and rename "Pictures.pd4".It can also help to remove all the video of the target directory files, although the screen saver will play some video formats.
-
Host for vmware integration tools
where can I download the host for Vmware integration tools?
the support site are not providing the relevant download
https://eqlsupport.Dell.com/support/download.aspx?ID=3199
Klick on VMware integration or eqlsupport.dell.com/.../download.aspx
Its a set of programs. Most likely, you are looking for the MEM (Module of Extension Multipath) and VSM (Virtual Storage Manager), formerly known as the ASM/VE. The last is the "plugin" for the connection between your group EQL and vSphere vCenter. His only usable in the 'new' WebClient vSphere and not for the old c# one.
Kind regards
Joerg
-
Hello
I am looking for two 10 GB switches to low price without perfomance high-end to create an environment of demonstration NSX. VMware NSX has only one requirement difficult and an option for the integration complete.
A 10 GB of Dell switch x 4012 would comply with the following requirements:
- MTU > = 1600 (for the encapsulation of packages)
- Support IGMP (HA hybrid mode but optional in our test configuration)
I'm not able to find a reference in the documentation of these two characteristics.
Thanks in advance for the help!
If you have another idea or suggestion, feel free to contact me.
Hello
It does not meet the requirements for Vmware NSX.
Page 473 http://downloads.dell.com/Manuals/Select/networking-n4000-series_User%27s%20Guide_en-us.pdf
Console #config
Console (config) #system jumbo mtu 9216
Page 847 shows the configuration for IGMP.
MSXML.dll, msxml4.dll and vssui.dll it is not a surprise because these dll does not exist on Win7 x 64 in the %SystemRoot%\System32 directory.
I found msxml4.dll in SysWow64 - registered. But msxml.dll and vssui.dll are really do not exist on Win7 x 64. Then, for sure - this script itself is the problem!
What other options I do P2V conversion?
Are there configuration problems more can I fix it to make the work of P2V conversion?
Kind regards
Dmitry.
PS please see logs 2 closed - system directly, 2nd - diary of the conversion attempt using Acronis True Image Home 2010 disk image works 1 journal of P2V conversion attempt.
using regedit is possible
You obviously did not read
Select HKLM, then Menu > file > load hive.
_________________________
VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual
You find me also in the PhD Virtual Backup support team
Maybe you are looking for
-
Updated earlier - stuck download (OSX)
I have old 30000 + jpg-pictures in my library of Photos that I've "consolidated" in my library, but they will not be downloaded to my library to iCloud. I have tried rebooting my iMac and stop/start the Photos app with no luck. I filtered the photos
-
L750-1LC - BIOS Update & policy of Toshiba Satellite
I own a Satellite L750-1LC and got not even 2 months ago so it is covered with the guarantee and the additional service of guaranteed etc. nomatterwhat. A few days ago I was updating the laptop as Tempro prompted me to do, and generally update is not
-
My HP PSC750 is stuck "scan if an error occurs. Turn off power then new. I can't copy or print. I tried turning it on and outside, but he just wants to make an alignment of cartridges and then returned just to scan failure.
-
We have companies everything changed at some point in our lives. And we all go through the process in the first weeks, where you feel new and are just trying to figure out how not to get lost on your way in the mornings.On top of that, trying to fami
-
Please help the question above