Reference Dell Custom Image for Vmware ESXi 5.1

Similar Questions

• R710/R720 - Dell customized Image of VMware ESXi 5.5 Update 2 - megaraid_sas version specific?

  That I improve a R710 and two v5.5 (Dell image) to v5.5 U2 ESXi ESXi R720 using the image of Dell here:

  www.dell.com/.../DriversDetails

  The documentation "Upgrade Guide to ESXi 5.5 using Dell customized Image" here:

  www.Dell.com/.../manuals

  indicates that a specific version of the megaraid_sas driver must be installed.

  Is the version megaraid_sas that installs with the image of Dell U2 v5.5 not the right version?

  I just ran the upgrade on a R710 and it's the megaraid_sas version installed:

  ~ # vmkload_mod s megaraid_sas | grep Version
  Version: Version 06.803.73.00, build: 1331820, Interface: 9.2 inspired: August 22, 2014

  Thank you.

  Hello

  It lists the R720 and R710 systems supported and both link to the same page, so the customized version is the same for both servers. Is the version listed in the reference guide for A02

  megaraid_sas - 06.803.73.00

  Page 5 ftp://ftp.dell.com/Manuals/all-products/esuprt_software/esuprt_virt_solutions/vmware-esxi-5_Reference%20Guide6_en-us.pdf

  This is the same version that he shows for your installation on the R710 so that seems correct.

• OpenManage for VMWare ESXi has no possibility of tasks of virtual disk

  OMSA v 7.1 and 7.2 for Windows (and earlier versions) allow the user to perform many tasks on virtual disks, including reconfiguring - expand a RAID array with a new drive.

  This is not true for managing open for VMWare ESXi - although you can monitor the status of the RAID and disks with the browser of the OMSA interface type, you cannot perform tasks - can not even make a high beam Flash.

  It is a huge problem, because the PERC controllers (H700 and H800, for example) don't allow you to develop virtual using hard drives not Dell disks when you try this during startup in the bios.  (These controllers only allows you to create new virtual disks using drives not Dell).

  This test was conducted using the latest firmware (12.10.4 - 0001 A10) and drivers for the H700 and H800 and multi-server r610 ESXi 5.1.

  Other people with VMWare have been affected by the present?  The only solution is to have two player networks connected to the computer, and create a simple Windows with OMSA, boot in Windows Server to expand the table using OMSA for Windows.

  I would be interested in the comments of others, including those of Dell.  We spent hours on the phone with Dell; This seems to be the only solution.  (Yes, Dell released a firmware version last year that has ceased blocking non Dell readers, but it only works for the creation of a new virtual disk, do not expanding one existing).

  Yes.  It came through a discussion in the Dell | Servers | Discussion of the RAID community.

  en.Community.Dell.com/.../20263442.aspx

  There is a CD bootable linux called OMSA Live that you download from PowerEdge (linux OS) systems management.

  This OMSA PERC H700 and H800 control and allows you to do everything.  When you reconfigure the RAID and the PERC card starts the reconstruction, although it seems risky, you can restart under VMware and the reconstruction of the RAID continues on.  And you can analyze with OMSA for VMware.

• Reference Dell customized version of ESXi 5.5

  I just bought a Dell PowerEdge T320 for a virtualization host laboratory and installed custom Dells 5.5 ESXi hypervisor leave (dell.com) on the bare metal.  My question is did anyone know how this license since it has not been downloaded from the vmware.com website?

  Can I go out with ESXi installation directly from vmware and more later manually installed drivers for compatibility with the Dell hardware?

  Thank you!

  Reference custom Dell uses 5.5 ISO ESXi a normal VMware ESXi key provided by VMware license.  A normal installation of ESXi 5.5 it's already contains Dell drivers if you don't have to worry to inject drivers later, etc.

• Driver RAID for Vmware ESXi 5.1 on Dell R420.

  My project is to install Vmware ESXi 5.1 on a Dell R420 with Raid1 configuration. The question I have after configuring raid1 in raid utility is created using the, I launch the installation of Vmware ESXi 5.1. What is ESXi 5.1 sees not the raid1 partition but rather see two disks as are they worn can't in raid1 configurations.

  I need to have this in raid1 config, can any who share an idea about my problem please or point me in the right direction.

  I did some research but nothing seems to help resolve this issue.

  Thank you

  Sheriff.

  Sorry for my previous response:

  DELL-Daniel My - when I boot in the BIOS of the controller, I see the raid in a raid1 configuration.

  Mgr dev you are right, I did research more when you all answered. I see the PERC S110 pilot was a software raid controller and thus the vmware esxi wouldn't work in a raid configuration 1 (software raid).

  Thank you guys for you answer and who helped me

• Reference Dell custom ESXi 5.1 u1 broken link

  Hello

  I am trying to download the iso of esxi Dell custom from http://www.dell.com/support/drivers/us/en/19/driverdetails?driverid=RD5JN 5.1u1, but the link is broken.  Is there somewhere else I can get this from?

  Thank you.

  The link and the download works perfectly for me! You have any restrictions for your browser.

  André

• CONFIG for VMWARE ESXi 5.1 LABORATORY home

  Hello

  Is below configuration good enough to set up the VMware ESXi 5.1 laboratory at home?

  
  

  CPU - Intel® Core™ i7-4770 processor (8 M Cache, up to 3.90 GHz)

  Motherboard - Intel DQ87PG

  SAS hard drive - SEAGATE BARRACUDor

  SEAGATE BARRACUDA 7200.14 hard drive - 1 TB

  Hard drive SSD - Samsung 840 Evo 120 GB

  Memory (16 GB) - Kingston DDR3 1600 MHz 8 GB * 2

  Monitor - SAMSUNG S19A003N

  Cabinet - battle of Cooler Master HAF 912

  OS - Windows 7 Professional 64 bit

  
  

  I intend to return one of the below links to set up the LAB and I hope the above configuration is in favour.

  
  

  http://boerlowie.WordPress.com/2011/11/30/building-the-ultimate-vSphere-lab-part-1-the-story/

  
  

  or

  http://popravak.WordPress.com/2013/07/26/VMware-vSphere-5-1-lab-on-our-laptops/

  
  

  
  

  Thank you

  
  

  You can find all downloads for VMwre to https://my.vmware.com/web/vmware/downloads. What you might want to look for are the links "Download trial" to "VMware Workstation" and "VMware vSphere. BTW. is there a reason you ask for older versions?

  For Windows Server, see download Windows Server 2008 R2 Evaluation (180 days) from the official Microsoft Download Center

  André

  PS: In the past VMware has provided a free license of VMware Workstation after you have completed the requirements to become a VCP - DCV (i.e. necessary training, more exam). I'm sure they'll continue to do that.

• Adding a custom Image for a Style

  Yet another stupid question! Is it possible to add a custom style image? For example, I have a style named attention and I want this style to use a specific image. If possible, please provide details for its implementation. If it is not possible, a code snippet is perhaps the best option?

  Thanks again.

  Hello

  First news of 'bad': I can't find an option to add a background image for a hollow style editor the Robo8 paragraph. You can post as a feature request.

  Each paragraph you create, wil you have in your css style, and it is a bit of trial and error. A major advantage: whenever you need to change the image, it will be just a few minutes!

  If you need help more with your css, just post back.

  Take a bow

  Willam

• Reference DELL demanding $80 for a share of $5.90

  Laptop Inspiron 5758 bought April 2015, had the power switch replaced under premium support Oct - 15, 2 days after the end of my premium (to July 19) support switch has not yet. Card replacement (of the power T2CVC button) costs between $5.90 and $15, but is out of stock on every site I can find. Reference DELL tell me or send my laptop to be fixed @ $169, either to buy the small Board that DELL has a monopoly on cost me $85 (Anurag Srivasava3 July 21, 12 h 50 HE)

  This is outrageous, this is a new laptop and I expect at least Council (oct-2015) replacement work would be covered or DELL would have at least the care that I have a computer DELL with a hardware fault rather enjoy my situation and make huge profits that they would send me a part at normal price.

  Check out this link.

  Dell Inspiron 17 (5755 / 5758) power of button with cable - T2CVC

  They can notify you when it's back in stock...

• Hyper-v 2008 R2 for Vmware ESXI 5.5 problem

  Hello world

  We are migrating to Vmware ESXI with HP 3PAR storage we have some important servers as vms on Microsoft Hyperv 2008 R2, I downloaded and installed the VMware vCenter Converter Standalone Client on the host Microsoft hyper-v connected to the localmachine as administrator and also to define the credentials of esxi distance everything works fine until it blocks 33% retried the process several times but without success , I collected the log, if I understand correctly this is something related to timeout or something maybe someone clears me on the issue, thanks a lot

  also a question should I try to install the stand-alone converter on each virtual machine, hyper v or should I install on the computer host and make the conversion?

  is it possible to make the conversion without turning off the virtual machines?

  Thanks in advance

  You do not need to install the converter on each machine, only the converter agent, which is installed automatically when it is not found on the destination computer.

  HTH

• Reference Dell Factory Image Restore

  My hard drive is partitioned to C & D with Vista Home Premium installed on both. D was used to test the software and, after several installs and uninstalls, it's a mess and I want to start with a clean drive. My question is can use the Dell Factory Image Restore to redo the D drive with all the drivers, etc. rather than a clean Windows Installer with the hassle of installing software and drivers? I ran the restore to see if he offered an option to choose which drive to restore but it didn't. He only asked if I wanted to format the drive, so I stopped here assuming that it would be to format my C drive.

  Anyone know how and if I can do in terms of the restoration on the D drive.

  
  

• HP Custom Image for ESXi 5.0.0 Update 1 vs VMware provided

  We use models of generation of servers, ProLiant DL HP 5, 6 and 7 to our environment vSphere. Someone at - it experience with the use of the HP device provided ISO vs VMware?

  I've been using VMware images provided and for moving to ESXi 5.0U1, I am trying to determine whether to use images of HP now.

  
  Suggestions, comments, and or PROs or idiots would be greatly appreciated.

  Thank you!

  As others said, the ISO provided HP is very good, but it is in no way a magic requirement. They contain little update driver-VIBs and, in addition, the material management extensions.

  Basically, everything that HP and other hardware vendors are doing with their ISOs custom entering the release of vanilla by VMware, the addition of a few separate packages (material management extensions) and maybe replace some drivers specific with updated versions (as a driver more recent be2net, which is just what VMware offers as an updated driver to separate day on their site anyway). They do not affect the VMware components as esx-base package

  You can also easily build an almost exact copy of HP image yourself, updated or additional drivers and management extensions are all available after all. And of course you can always install management packs and drivers updated in your vanilla install yourself afterwards, through for example Update Manager.

• Reference Dell Customer Integration pack for sccm 2007 sp2

  Hello

  I'm having trouble installing the integration of customer Dell for sccm 2007 sp2 Installer pack to install Custom ACtion.help and then gives the error 2147467261. Does anyone have any ideas on how to solve this problem.  Is the server a sccm 2007 ver 4 is installed on this windows 2008 R2 server

  Any help would be appreciated

  Has raced in mode compalty

• How to get the free license for HP Custom Image for ESXi 5.1.0

  Hi there guys.

  I have HP Proliant DL160 G6 and I installed this: https://my.vmware.com/group/vmware/details?downloadGroup=HP-ESXI-5.1.0U3-GA & productId = 285

  I would like to ask how I can get a free license for this hypervisor?

  My server supports only hypervisor 5.1, but none of the most recent versions, then told me to install the one I posted above.

  This version of the free hypervisor and how do I get the license for this last, or where I can download another more recent free hypervisor can 5.1.0?

  Thanks in advance!

  Unfortunately, you can't have the old version free license... As if you were going to a free version, you can try the latest version and key are available with them. Currently esxi 6.0.

  If you bought the license for 5.1, then you can get the license key. another sound impossible.

• Reference Dell R300 Xeon 3353 and ESXi 4?

  Hello

  I'm currently under ESXi 3.5 on a Dell R300 with CPU server 3353 everything works fine. I am considering the upgrade to ESXi 4 but I do not see in the HCL for support for the UC 3353 (only 54xx ones).

  Is there a reason for this? Does anyone have experience with 3353 R300 and ESXi 4?

  Thanks for your help,

  Rémi

  Don't worry, ESXi 4 will work fine.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru