ACS 5.1 and several areas of AD

Similar Questions

• My stored user names and passwords are removed several times each time the computer restarts. ______

  My "XP Home Edition' Service Pack 3 > stored user names and passwords are removed several times each time the computer restarts.

  Please check the LINK for the process that I'm going through, but nothing helped.

  http://www.box.NET/shared/zcokjesxx3

  Thank you for your kind cooperation.

  Sincerely,
  Frank

  Hi Ajay,

  It worked!

  Was the only thing that I changed, I added a % USERPROFILE % so he looked like that before

  %USERPROFILE%\Application data

  Instead of like this USERPROFILE%\Application Data

  Not sure if this was necessary to make - but again - it WORKED...

  Thank you very much for your time and your help is to solve this for me.

  Sincerely,

  Frank

• Microsoft tools for restore the disk framentation system, and several others are missing. Is there a way to recover/reload?

  My computer crashed so I had to use my recovery disks that are about 8-10 years. When I reinstalled Windows service pack 2, the system recovery tools and several other microsoft tools not have installed on my system. Is it possible to recover these tools? The command prompt tells me that they are not on my system and get help from the Server Manager in the service (Net HelpMSG 2185) option. Can you tell me what that means and if/how I can do this?  I can't find a tab from the system restore on my computer. I guess that's because I have more access to these tools. My messages when I try to update things like Windows Media Player tells me that I can't set a date of restoration and that if I lose my installed programs that they can not be recovered. Guess that means I have to use my recovery again disks?

  <(Microsoft tools="" for="" the="" system="" restore,="" disk="" framentation,="" and="" several="" others="" are="" missing.="" is="" there="" a="" way="" to="" retreive/reload="" these="" tools?="" (assessories,="" system="" tools)="">

  Hey, take a look at the article and try the steps

  http://www.softwaretipsandtricks.com/Forum/Windows-XP/17333-System-Restore-tab-missing-XP-Pro.html

  See you soon!

• I tried in several ways (in line, calls and return on this forum), but no aid has been granted on Edge inspect.  I get the message "your user name and password are incorrect, or your account has no access onboard inspect CC.  Any assistance

  I tried in several ways (in line, calls and return on this forum), but no aid has been granted on Edge inspect.  I get the message "your user name and password are incorrect, or your account has no access onboard inspect CC.  Any help is greatly appreciated.  One of my original case numbers were: 0216572509

  You need installed Adobe Creative Cloud. Check the link for more information below.

  Edge inspect FAQ EAC

• Several area 404 and file Setup

  Hi all

  Hope everyone had a nice weekend.

  I am currently setting up www.sunnyheat.fr for a customer and welcome us he www.sunnyheat.org.uk system because they are the same company, but require the multilingual Web sites. They wouldn't get off the google translate road having where he made good french.

  The site of France requires an error page 404 in French, but the default 404 error page is defined in the standard system page which is in English.

  My other question is, how did you put your file for several areas requiring a separate content and pages?

  At the moment I have a FR folder at the root, and all pages are configured in that, is it possible to have two separate folders?

  Look forward to your responses and how you do it!

  Thank you very much

  Asad Ali

  Hello.

  If you properly configure your domains if you go on the pages of system, you will see that you have an error 404 by country, as you can see on the screenshot below:

  

• ACS 4.2 and Active Directory

  I'm putting in place our new ACS 4.2 server. This is version 4.2 Build 124, running on a Windows 2003 server. I'm having some trouble with the enumeration of the groups and just may not know what Miss me. We have 7 different areas, and I can only list one of them groups. We do not run ACS on one of our domain controllers, but the server is a member of the domain controllers. I even added a service account is a domain administrator and services run as account but I still cannot enumerate groups. Any help would be greatly appreciated.

  Hello

  I know that you have a domain administrator account that is running the services ACS. But I'd like to as go you through the steps listed below again.

  ------------------------------------------

  -You should have a user on AD.

  -To make it difficult to hack, give him a very complicated password for a long time.

  -Make the user member of the Domain Admins group.

  -Make the user member of the Administrators group.

  -Make the user member of the Enterprise Administrators group.

  On to Windows 2000/2003 server running ACS:

  -Add the new user to the appropriate local group.

  -Open "Administrative Tools" in the control panel.

  -Open "Computer management".

  -Open 'Local users and groups' and then 'groups '.

  -Double-click the group "Administrators".

  -Click on 'Add '.

  -Choose the domain in the box "search in".

  -Double-click the user created above to add it.

  -Click OK.

  -Give special rights to the new user on the ACS server.

  -Open "Administrative Tools" in the control panel.

  -Open "local security policy".

  -Open "local policies".

  -Open "User rights assignment."

  -Double-click "Act as part of operating system"

  -Click on 'Add '.

  -Choose the domain in the box "search in".

  -Double-click the user created above to add it.

  -Click OK.

  -Double click on "Log on as a service."

  -Click on 'Add '.

  -Choose the domain in the box "search in".

  -Double-click the user created above to add it.

  -Click OK.

  -Set the ACS services to run as long as the user created.

  -Open "Administrative Tools" in the control panel.

  -Open "Services".

  -Double-click the CSADMIN entry.

  -Click the 'connection '.

  -Click on "This account", and then on the button 'Browse '.

  -Choose the field, double-click the user created previously.

  -Click 'OK '.

  -Repeat for the rest of the CS services.

  -Wait for Windows to apply the security policy changes, or restart the server.

  -If you restarted the server, skip the rest of these instructions.

  -Stop and then start the CSADMIN service.

  -Open the GUI of the ACS.

  -Click on System Configuration.

  -Click on the Service order.

  -Click "restart."

  Note If domain security policy is set to override settings for "Act as part of operating system" and "Log on as a service" rights, rights of user changes listed above will also be to do here.

  If you log on several areas, a full two-way trust must exist between the domains, the user (ACS account) must be created and given the high access in each domainbto be questioned and FULL domain each domain must be listed as a DNS suffix in the properties of the IP Address of the server on which the ACS is installed (restart netlogon service after adding the FULL domain name).

  HTH

  JK

  Please help the rate of messages-

• My photos and videos are not in chronological order, when I export the Photos app

  Hello. When I export my photos and videos from the Photos app on my iMac all the photos and videos are not in order. I need all the photos in good standing - I need to export about 5 000 pictures of the application in order for a meeting next week! Help, please!

  Ethan.

  This is not photo - it is a function of the viewing program (probably the finder) - once the photos are exprted form pictures you can see then in different ways which you control, Photos does not - by the finder you can view by name of son, byt several dates, by file size, etc.

  Usually, the best way to accomplish what you want is to export using the names of batch file numbeing and then sort by file name in the program viewing

  LN

• How to set up several areas of interest to IMAQdx?

  I was always using Measurement & Automation Explorer for the region of interest (ROI). I would like to know if there is a way to set up two Kings for the IMAQdx, since I only need these two regions and they are on the left and right of the image.

  Hey Ishi,

  What camera do you use? FireWire and GigE Vision? Are wanting you the camera acquire several Kings simultaneously or you just want to go between them? If this is the first, while some cameras support this, there is no mechanism normalized in the standard for a bus I know for the camera to send several Kings of an image. Cameras that do this have their own mechanisms owners set up and decode the multiple images of the single stream. You must decode the image data manually do this with IMAQdx.

  Eric

• Locking XP! error "the system could not log. Make sure your username and domain are correct, then type your password again.

  Original title: Locking XP!

  I tried to read all the relevant messages and walked the Earth for this solution, if someone could help me I would be grateful.

  A dear friend died and I got his PC - a fast XP with SP3 which (elderly) she only used for web & email. His account has been "Judi".

  I noticed a while back that, on the logon screen, that there is another user called 'Fiona' (she told me an old co-worker who probably stayed with her).

  Now a friend in need of a very old HP PC Lions not having completely fortunately I managed to copy his files before he was insane - I offered this newer PC it after that I have "set up" for him.

  I put a new account in place on this new PC "Ken" has been added. Then, after the deletion of accounts Judi & Fiona, I cleaned the machine with MalwareBytes, CCleaner & defrag.  All is well now with only Ken appearing on the screen logon (with an image of the appropriate icon), that I used several times in the implementation of his e-mail account and move its acrossetc files. His password is empty.

  Being the only user now Ken, I thought that it strange would its user (only) one click each time to the 'Log in', so I searched and found a box that said something to the effect «... do not show a picture of connection...» » .  That started my problem!  Removing his login "icon" brings ONLY the following - FIONA!

  When connecting a Logon Message now says "the system could not log. Make sure your username and domain are correct, then type your password again.  Letters in passwords must be typed using the proper case" the choice for this error message is 'OK', which takes you to a login screen 'Type Win98' older Classic looking (no icon user) who was behind this logon Message, with (name) Fiona appears on the login screen (former) (full name and empty below the password) , with the choice to enter the password or a stop!

  Of course the password cannot be guessed (Yes - tried blank, admin, etc.) so the only choice is to stop.

  VA F8 at startup for 'Safe mode' goes to screen black WITH Fiona login screen as usual safe mode above and booting with the CD using NTPASSWD shows the usual 1) Administrator 2) 3) invited Ken and 4) Support Microsoft - NO FIONA is shown - and I put all these passwords to 'empty '. Of course repair and recovery repair 'R' does nothing on the removal of Fiona

  This translates the original message & Fiona connection again.  How can I return to screen "image icon" connection without losing files and mail Ken Ken. Where Fiona could hide when it is not a USER of the NET?

  Yet once again, I'd appreciate any help. Brian.

  You should be able to just select (click on) "Fiona", press the delete key, and then type any desired account name.  It doesn't work?

  If you cannot type on "Fiona" in the logon window, you can use the following procedure to modify the Windows registry... or you can take the computer to an independent repairer and ask them to fix it for you.  Don't go to a chain of stores, as a "geek squad" or BigBoxStoreUSA type of place.

  Go here--> https://www.raymond.cc/blog/how-to-edit-windows-registry-key-values-without-booting-in-windows/

  Choose method 1 or method 2.  I'm familiar with Hiren (method 2), but not with the program described in method 1 (even though it seems simple).  Any ISO file you choose, I suggest to download and use ImgBurn (free) to create your CD bootable from the downloaded ISO file.

  The registry key to change is in the same place as "userinit" (which is the example used in the article), so to follow 1-5 step method or method 2 for step 7.

  You will be at HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon

  In the right pane of the registry editor, you will see a large list of items.  Scroll down the page until you see LogonType and double-click it.

  In the "Value data" box, type 1, and click OK (1 is the same either hexadecimal or decimal).

  Close the registry editor, take the CD from the drive and reboot.  You should see the Welcome screen when Windows restarts.

• Internet Explorer, MS Paint and accessories are missing from my computer.

  My Internet Explorer, MS Paint and other accessories are absent from my computer, I tried to reinstall them with my XP CD, with no luck, no matter what I do to reinstall it will not load.

  Whats missing I can't reinstall is:

  THAT IS TO SAY 8

  MS Paint

  Calculator

  Word Pad

  Sound recorder

  Volume control

  Character map

  Accessibility Wizard

  Then someone please help me, I have searched the Internet on and tried several things to get these programs comes back with no luck at all.

  
  

  step 1

  before you start to try programs and things

  Save all your data, otherwise if you have missing DLLs you will mess the registry and then are bad

  step 2 

  After trying all the software that you need like antivirus, registry cleaners, defragmenters

  try to look for the icons and programs on the windows system32, don't start with run

  If you find any, you are sure that the programs are installed

  then you will know is a shortcut problem

  step 3  

  in case u find them recreate the icons everywhere u love and change u ensure the safety of you os

  warns we exchange, in the case where u can't find it

  Restart the pc and with f8, go to the last known good configuration

  that way u save a last log

  check is that they appear, if they are not,

  restore the system, or check the economy mode option

  If you see them in the mode without failure, then save and load on the right configuration

  in any case remember that you have wnds f1 help key button

  step 4  

  last option u said that you have a cd of xp re install

   

    

• My photos and video are not supported due to safe mode (I think)

  I went in safe mode to move around 3 000 files, photos and videos of user account 1 and account 2 to 2 office in a folder called 'FILES2KEEP '. When I rebooted my computer to check on the photos, I could not see most of the miniatures, and even with some still visible, when I tried to open windows photo gallery said, "Photo Gallery can't open this photo or video. This file format is not supported, or you do not have the latest updates to the photo gallery. "For the videos, I received the error message 2048 after them playing with QuickTime player. These files were not deleted somehow, just moved from one region to another in safe mode. The sizes of these photos and videos are normal and their respective sizes. I decided to place these files in normal mode and then restarted my computer, however, nothing has worked. I sill have the folder "FILES2KEEP" on desktop 2, but without the files user account. This could be the cause this and what are the several ways to address this issue?

  (Note: I'm running on Windows Vista Edition complete with Service Pack 2)

  Safe mode was probably not the cause, but the files are permanently damaged and need to be restored from your most recent backup.  The files may have been damaged during the move, but which is unlikely because move files only changes their display location, the tracks on the disc do not actually move.

  You could try checking the errors on your drives, the 'answer' to this page explains how: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system/chkdsk-utility/4f46929e-db2d-43e0-88c4-a3a5c49bb2da

• My search engine and links are overrided by other search engines and links are redirected to unknown sites.

  Lately I have search in Google my search redirect to Ask.com or Websearch and is not found in the Web site or pick up whenever I ask. Also when using links rather than the link to come they are again redirect to "oops the link is broken or unknown sites. I have two computers and it is only happening on one of them. This happens in Internet Explorer and Mozilla Firefox, so there must be something in windows, I guess.

  Help! Furthermore, research, sites and links are safe places. I practiced before several times. It has all of a sudden start happening. One of the sites that I can not enter is my wordpress dashboard. I get on my account but when I click on my dashboard it say Oops this link was broken. It works perfectly fine on other computers. How can I fix?

  Lately I have search in Google my search redirect to Ask.com or Websearch and is not found in the Web site or pick up whenever I ask. Also when using links rather than the link to come they are again redirect to "oops the link is broken or unknown sites. I have two computers and it is only happening on one of them. This happens in Internet Explorer and Mozilla Firefox, so there must be something in windows, I guess.

  Help! Furthermore, research, sites and links are safe places. I practiced before several times. It has all of a sudden start happening. One of the sites that I can not enter is my wordpress dashboard. I get on my account but when I click on my dashboard it say Oops this link was broken. It works perfectly fine on other computers. How can I fix?

  Hey Isabellasing

  be redirected is often a malware problem

  to make sure that your computer is free from malware scanner

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If this does not work in normal mode only the above work in SafeMode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Walter, the time zone traveller

• State of the controller H710P degraded, but pdisks and vdisks are OK

  Hi, I have several PowerEdge servers R720 with Mini H710P (embedded) controllers and PERC H710P who have problems. Omreport, the controller is in a non-critical State and a degraded state:

  Controller of
  ID: 1
  Status: No reviews
  Name: PERC adapter H710P
  Location ID: PCI Slot 2
  State: degraded
  Firmware version: 21.3.0 - 0009
  Minimum Firmware Version: 21.3.1 - 0001
  Driver version: 06.806.08.00 - rh3
  The minimum required driver version: not Applicable
  The Storport driver version: not Applicable
  Minimum required: Version of the Storport driver: not Applicable
  Number of connectors: 2
  Regeneration rate: 30%
  BGI rate: 30%
  Consistency check rate: 30%
  Rebuild rate: 30%
  Alarm status: not applicable
  Cluster mode: not Applicable
  SCSI initiator ID: not Applicable
  Cache memory size: 1024 MB
  Patrol read mode: Auto
  Patrol read status: stopped
  Patrol read rate: 30%
  Read the iterations of patrol: 42
  Give up control of consistency error: disabled
  Enable reversible hot spare and replace the: enabled
  Load Balancing: not Applicable
  Auto Member Replace on Predictive Failure: disabled
  Redundant path view: not Applicable
  CacheCade Capable: Yes
  Persistent backup: disabled
  Encryption Capable: Yes
  Currently key encryption: No.
  Encryption mode: no
  Preserved cache: not Applicable
  Spin down drives unconfigured: disabled
  Turn down hot spares: disabled
  Spin down drives configured: disabled
  Automatic disk Power Saving (Idle_c): disabled
  Start time (hh: mm): not Applicable
  Time interval of rotating upward (in hours): not Applicable

  Vdisk is OK:

  Controller PERC H710P adapter (Slot 2)
  ID: 0
  Status: Ok
  Name: Virtual disk 0
  Status: ready
  Hot violated political alternatives: not
  Encrypted: No.
  Layout: RAID-5
  Size: 3 350,25 GB (3597303545856 bytes)
  T10 Protection Information status: No.
  Liquid state of Cache associated with: not Applicable
  Name of the device: / dev/sdc
  Bus protocol: SAS
  Media: HDD
  Political reading: Adaptive Read Ahead
  Political writing: write back
  The cache policy: not Applicable
  Stripe Element Size: 64 KB
  The strategy of Disk Cache: disabled

  And so are the physical disks (output truncated, there are many records!):

  ID: 0:2:7
  Status: Ok
  Name: Physical disk 0:2:7
  Status: ready
  Supply status: leader
  Bus protocol: SAS
  Media: HDD
  Part of the Cache Pool: not Applicable
  Remaining nominal write Endurance: not applicable
  Predicted failure: No.
  Review: LS0A
  Driver version: not Applicable
  Model number: not Applicable
  T10 IP Capable: No.
  Certified: Yes
  Encryption Capable: No.
  Encrypted: Not Applicable
  Progress: Not Applicable
  Mirror Set ID: Non Applicable
  Capacity: 558,38 GB (599550590976 bytes)
  RAID disk space used: 558,38 GB (599550590976 bytes)
  Space disk RAID: 0.00 GB (0 bytes)
  Hot spare: dedicated
  Vendor ID: Dell (TM)
  Product ID: ST600MM0006
  Serial number: S0M4EMF4
  Part No.: CN07YX587262251B0119A02
  Negotiated speed: 6,00 Gbps
  Measuring speed: 6,00 Gbps
  PCIe negotiated link width: not Applicable
  PCIe Maximum link width: not Applicable
  Sector size: 512 b
  The device's write cache: not Applicable
  Date of manufacture: 03
  Week of manufacture: 02
  Manufacturing year: 2015
  SAS address: 5000C5007F103929
  Form factor: not available
  Void Publisher: not available

  I had found a previous thread which suggested updating the firmware, but I can't find a more recent version of the firmware for controllers (embedded or extra).

  If it makes a difference, all servers running RHEL 6.6 (Santiago)

  Lachlandehaas,

  I think you are right in assuming that the problem is caused by the firmware being obsolete. The firmware is actually a few updates behind. You can find the latest version of the update here. Updated the fw on the controller and let me know if the VD shows ONLINE later.

  Let me know what you see

• How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  * Original title: startup

  How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  Hello

  I understand you want to learn about programs, you should start your Windows startup. I will certainly help you to question.

  When you start Windows by using a normal startup startup, several applications and services automatically, and then run in the background. These programs include the base system, antivirus software, utility applications processes system and other software that was previously installed. These applications and services may cause interference when you install or run a program.

  The system configuration is a tool that can help identify problems that might prevent Windows from starting correctly. You can start Windows with common services and startup programs turned off and then reactivate them, one at a time.

  I suggest you to refer to the links below and check if this is useful:

  Using the Configuration System (msconfig)

  Perform a clean boot to determine if background programs interfere with your game or program

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• WLC / ACS / AD - domain and laptops no - domain (802. 1 X / PEAP)

  Hi all

  I implement a solution based on 4404 WLC, 1113 ACS and Microsoft AD. What I want to achieve is to have two WIFI (SSID), that can be used by users on laptops of the domain, the other can be used by the users in the domain on personal laptops. Field portable computers will have full connectivity, but personal laptops will be restricted.

  I created the two SSID using 802. 1 X by ACS / Remote Agent and can authenticate and connection OK.

  I thought I should have user auth and auth machine for laptops of area but just user auth for personal laptops.

  I have unauthenticated machines go to one group ACS or blocked, but I need to enable them in if they are on the SSID restricted. I can't quite understand how to have two SSID is authenticating with the same ACS / AD - one green and the other.

  I'm on the right track?

  Anyone done this before or have any bright ideas?

  See you soon,.

  John

  With the use of WLAN access based on the SSID, users can be authenticated based on the SSID they use to connect to the WLAN. The Cisco Secure ACS server is used to authenticate users. Authentication happens in two stages on the Cisco Secure ACS:

  1 authentication EAP

  2 resulting SSID authentication of network (NARS) on Cisco Secure ACS Access Restrictions

  For the new designation and configuraiton following URL can help you:

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a00807669af.shtml