ACS 5.4 save the problem and Shell profile problem

Similar Questions

• Windows won't let me not newspaper inside a loop to save the settings and disconnects

  Windows won't let me open a session in this Office makes a loop to save the settings and disconnects

  It was a virus that's causing the problem

• Error message: to restore enough memory for programs running, save the file and then close or restart all programs

  It said "restore enough memory for programs to operate correctly, save the file and then close or restart all open programs".

  I changed the size of paging and says always the same, I have 1.5 GB free RAM, but don't know how to find or what to do 'virtual memory '.  Have windows 7.

  I started the safemode and run also memory dignostics and nothing found, please help, cannot afford to take a shop or get a new computer, I'm using another pc.

  I was recommended to download and. Run 'hitmanpro3'... but if anyone has had this problem and solved it or know how, please help!

  Thank you

  Hello

  Please contact Microsoft Community.

  I understand that you receive an error related to the lack of virtual memory. This error message appears when running any program that requires more memory your computer has, or running in the background, Windows manages the system memory by saving the data between physical memory and virtual memory. In order to help you better, please provide us with the following information:

  What is the brand and model of your computer?

  I suggest you follow the methods and check them off below if this solves the problem.

  Method 1: Clean boot

  A clean boot is a troubleshooting technique that allows you to get the computer facing up and running so that you can determine what elements of the normal starting procedure problems.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the clean boot, follow the section How do I reset the computer to start as usual after a clean boot troubleshooting under more information in the article to put your computer to normal startup.

  Method 2: Prevention of insufficient memory problems

  Follow the steps mentioned in the link and the check, it solves the problem. Follow the evolution of the size of the virtual memory section

  http://Windows.Microsoft.com/en-us/Windows/preventing-low-memory-problems#1TC=Windows-7

  Method 3: Virus Scan

  Microsoft Safety Scanner is a free burner that can be used to analyze a system for computer viruses and other forms of malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Additional information: Windows optimize for better performance

  Hope this information helps. Response with status so that we can help you.

• Save the problem with Photo Story 3 on Windows 7

  I managed to install Photo Story 3 on Windows 7 Home Premium, 32-bit.  The program works until I come to save the project and then just before the end of the process 'save', the following error message:

  "Some photo story program files may be damaged. Re-install Photo Story 3 for Windows and then change and resave your project."

  I did it at least four times, with the same result. Any suggestions please

  Hi GeorgeTroynar,

  ·         This is the first time that you try to save the project with Photo Story 3?

  You can completely uninstall the application and then install in clean boot state and check if it works.

  For more information about uninstalling a program and a clean boot, see the following articles:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned at step 7 of the article mentioned above.

  Let us know if that helps.

• I need to reinstall my Linux Mint, therfore also Thunderbird. How can I save the addresses and all my messages (copy and again after installation Thunderbird)

  I need to reinstall my Linux Mint 17 companion, therfore also Thunderbird. How can I save the addresses and all my messages (copy and again after Thunderbird installation)?

  You will need to backup your Thunderbird profile.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring #Manually_back_up_the_profile

• When downloading using firefox I should save the download, and then must go to the download file to start the download. When I download using internet explore I can run a download at the time where as it is downloaded. Can I change a setting somewhere?

  I use Windows 7 with firefox as my default browser. When I download a program using firefox, I wonder if I want to save the file, and then must go to the download folder to start the download. When I download using internet explorer, I gives me the ability to run the download at the time where it is downloaded instead of save the download. Is there a setting I can change to allow me to run downloads when using firefox instead of record?

  Hi shortwedge3,

  You can use the OpenDownload2 extension for the run option when downloading files with Firefox

• I just bought a windows xp disc and try to save the key and it won't let me not also tried by phone, I don't no what to do to get the registerd disc any help would be good

  I just bought a windows xp disc and try to save the key and it won't let me not also tried by phone, I don't no what to do to get the registerd disc any help would be good

  Do you mean "activate"? Registration is optional; Activation is not. You don't have not given us enough information to targeted assistance. What type of XP installation disc are you using? What product key you installed with (please do not post!)? What happened when you talked to the man during telephone activation? If the failure of activation by phone and you did not wait for a human to come on the line, try this once again and wait for the Rep of decision-making supported MS - MVP - Elephant Boy computers - Don ' t Panic!

• I made a form for my clients, I did this form with a button "submit" button, the button will save the form and send it, I did the URL to go to a different (different to mine) e-mail address but when I distribute the form and it is complete

  I made a form for my clients, I did this form with a button "submit" button, the button Save the form and send it, I did the URL to go to a different (different to mine) e-mail address but when I distribute the form and it is supplemented by my clients it send to my email address not the URL how to change this.

  No matter how you have configured the Send button when you use the feature distribute the form. There are some e-mail address is in your identity preferences (Edit > preferences > identity) and use it. If you can change the email address it or not to use distribute the form and the button send the value you want.

  One thing that happens when you use the feature to distribute the form is the form is enabled Reader, you can do separately, but you really shouldn't do if the form must be used by others. The dispenser a form must activate using their copy under license of Acrobat Reader.

• What are the security settings to lock a form with fields to fill and still allow someone drive to fill in the fields as as to save the form and print it?

  What are the security settings to lock a form with fields to fill and still allow someone drive to fill in the fields as as to save the form and print it?

  You want to allow someone to open your document and fill in the form (the fields that you have created), but not change or edit the form, right? Here is the answer - assuming you use Acrobat Pro and someone will open the PDF with the Acrobat Reader 9 minimum and more:

  Tools > Protection > encrypt< encrypt="" with="">

  Select YES to change security.

  Opens in a new window:

  Do not select NOT open the Document (or will require a password to open the document.)

  SELECT: Permissions (check the box next to ' Restrict editing and printing of the document. ")

  Change the following 2 settings in the drop-down list box:

  Printing allowed: select high resolution

  Changes allowed: select commenting on, fill in the fields on the form and signature of signature fields
  Selected leave: "enable access text for playback devices to screen for people with visual impairments.

  Change password Permissions (insert a password)

  Leave all the other settings alone in 'Options '.

  OK - OK

  Again enter the Permissions password (the one you entered above)

  OK - OK

  Save the PDF file to apply security [notice that (SECURED0 will appear after the title of the document]

• Script to save the file and close without user Interaction

  Hello

  I have a lot of script that closes a transform file, but it does not save the changes.

  I need the script to save the file and then close without user interaction.

  I looked at the script save slot, but this will require some user input.

  Can an advisor if please how to save and close the file without prompting can be reached?

  Script is the following:

  this.closeDoc (true);

  Look at the documentation for the saveAs method in Acrobat JavaScript Reference. This method is available in Adobe Reader for documents that have save the usage rights.

• Close and save the problem

  Firefox Save & Close not keep Emails 'up' Anymore

  Firefox 10 - I save & close working again, but it will not save the emails I want left upward & open all night. It does that a few days ago, then suddenly quit. It will always keep the tabs for Web sites. I need the 'Selected' emails to STAY up once again with Save & Close. I changed "Privacy" to "USE CUSTOM SETTINGS FOR HISTORY." Doesn't always work, but like I said, it was a few days agao. Any ideas? Thank you

  I've done the "config" thing several times & it still won't let me keep certain emails "up" for quick access the following day. It's a Huge time saver for me.
  

  Don't know what else to try. Has anyone else had this happen? Yet once, it will keep tabs upwards (when stopped), for Web sites. But I need to keep my Emails selected during the night, too, as it was too!

  Thanks for any help you can give me. Hannah Jo

  request by PM

  No chance that question coincided with the release of Firefox 10.0"If the question would perhaps therefore with cookies from this Web site. I hope that you always save cookies.

  Try to clear the cookies on mail.yahoo.com
  
  Right-click on the page, choose View Page Info > Security > "View Cookies".

• New Firefox, will not save the homepage and will open and display all add-ons every time!

  Okay - years old now, I used Firefox ONLY - he had the best extensions and modules from any other browser out there. Add to that, it is safe and very fast. This is my default browser.

  This week I logged on my DeviantArt site and odd ads began to appear in the lower corners left and right of the browser, unlike what I'd never seen before. Add to that, they were very inappropriate. So I guess something was wrong and went through three, as in 3, programs to find out if I got "bugs" the origin of the problems. And of course, there was a kind of nasty bug in Firefox, causing all sorts of questions.

  So, following the suggestions to fix, as well as the suggestions on here, I uninstalled Firefox (21) and then reinstalled the new version, 23. At first, I thought, ' Wow, this is really very fast! When I opened Firefox it does not go to my home page, he went to the Firefox start page, as well as the opening of the tabs for EACH add-on and extension!

  Yes, open tools, Options and reset the home page of my homepage, https://www.google.com

  Simple and something I've done before. I'm a geek and have worked on my own additions. Set up my home page, has been working in Firefox and went to youtube to download a video it would not! So went to DLhelper, read their comments, changed one of the strings and voila! No problems!

  So I thought it was fixed and I was happy. It was last night. This morning, I start the computer and the first thing we do is to open Firefox. And what happens? Oh, Yes, that's right, NOTHING THAT I wanted TO! It's back to the start page of Firefox, and it opens tabs for EACH SINGLE module!

  Holy carp, tired now. So I research of 8 this morning until about an hour ago, so a little more than 5 hours, that I keep trying to fix it based on instructions of Firefox. Go to topic: config, work on channels, change the info from the home page, etc. Save it. Return to tools, Options, and there is my home page. Close Firefox and open and what the heck? Once again, back to where it was, opening, as if I just downloaded this browser. Now, I spent literally HOURS trying to solve this problem and I am so frustrated that I'm almost ready to uninstall it! My one complaint is that I've looked everywhere to try to find this same problem and it does not. Is true, I am the only one having this weird problem?

  You can reset firefox?

  See below for what it does.

  • Firefox - modules to reset and refresh settings

• I created a form.  I want to just fix the form of an email, send to be completed by the customer, the customer save the form and email completed for his back to me.  I don't want or need follow-up.  The way I understand adobe procedures is

  How I underdstand procedure with Acrobat Pro DC, it's that I first have to distribute the form.  The client cannot save the form, unless I do it, and then I send the form distributed to the customer.  On the side of the user, I think it will confuse most of the clients that I work with

  There are two ways of submitting the form by e-mail without using Adobe distribution methods and each method has some problems.

  The easiest way is to create a 'normal send button' and set the URL of submit button to point to an email address as "mailto:you[at]domain.com". You need to enable rights of use on the PDF file in order to receive all of the PDF document in your Inbox; because Adobe Reader users are limited to show only data formats (FDF, XFDF and XDP, XML, HTML) only. This method is very reliable; because submission will fail if end-users have not properly installing the software side mail client by default, or if they use the webmail.

  The most reliable method is to define the button submit to point to a script on the side of server such as ASP.net or PHP; because the script bypasses software email client-side and sends the request through a SMTP server. Both methods require that the end-users to submit using Adobe Reader or Adobe Reader browser plug-in. Integrated PDF by default "spectators" of the browser are not able to submit PDF forms, they may not read rights of use of Adobe, and they are not compatible with LiveCycle XFA forms.

  Do you know what type of PDF you use? Acrobat, LiveCycle XFA or XFA dynamic static

  You have a web server? If so, is this a PHP Apache or Microsoft ASP.net host?

  Visit the following Web site for examples of script:

  www.pdfemail.NET/examples/

• Dynamic PDF up to 200 images, the size of the pdf is greater, cannot save the data and images to the form

  Hi all

  My client would like to dynamic images up to 200 photos to my forms. It works very well. However, when I add images up to 35 images. I could not add images to shape more. Then I save data on the form. All the images and the data entered on the form are missing. I don't know why.

  If I add only 10 images - I can record data and images on the form. 15456 KB is the size of the pdf.  I was unable to add more photos or data on the form.

  There may be a problem the size of the pdf? How big can make a limited dynamic pdf?

  Can save us the information and images as much as we want?

  I spent two weeks to work and trying to figure out this problem. However, it is not successful.

  Help, please

  Cindy

  You must ensure that your users do not import large images.

  Therefore, you can use a script on the change event of an image field that checks the size of the data and warns the user if the file is too large.

  function formatNumber(number) {
      var num = number + '',
      x = num.split('.'),
      x1 = x[0],
      x2 = x.length > 1 ? '.' + x[1] : '',
      rgx = /(\d+)(\d{3})/;
      while (rgx.test(x1)) {
          x1 = x1.replace(rgx, '$1' + ',' + '$2');
      }
      return x1 + x2 + "KB";
  }
  
  var sizeLimit = 200, //allow upto 200KB images
    thisSize = Math.round((this.value.oneOfChild.value.length * 3 / 4) / 1024);
  
  if (sizeLimit > 0) {
    if (thisSize > sizeLimit) {
    xfa.host.messageBox("Note: With " + formatNumber(thisSize) + " the size of the imported image is greater that the recommended maximum of " + formatNumber(sizeLimit) + ".\nLarge images can cause a insufficent performance.\n\nIf possible, use images with the following recommended specs:\nFormat:\t\tPNG or JPG\nColor depth:\t8 Bit (higher is not supported)\nColor space:\tRGB (CMYK is not supported)\nFile Size:\t\t" + formatNumber(sizeLimit), "Recommended image size exceeded", 3, 0);
    }
  }
  

• Save the problem!

  I had a problem with the registration of the fla file in Flash CC.

  I edited my code-> Ctrl + s for save-> ctrl + enter for build-> close the swf file-> close the fla file-> re - open the file saved in fla-> my edited code disappears

  Here is my code:

  -Before editing: count = Number (getTimer () - startTime)

  -Once edited: count = totalTime - Number (getTimer () - startTime)

  After registration and reopen-> it displays as before slot management .

  It is not happen all the time, but it is really critical with these minor changes. Does anyone get the same problem?

  the problem I see with a flash document is the same as the one I described for a canvas document and has the same alternatives.  the best workaround is:

  1 change (add, delete, or modify) something onstage. (you can immediately cancel your changes, then save).