Action Center notification: SmartFTP has stopped working

Similar Questions

• using win vista sp2 64-bit overpriced home, the catalyst control center host application has stopped working

  Using windows VISTA Home overcharging sp2 64-bit, the catalyst control center host application has stopped working

  Hello

  You will need to download the correct drivers for the graphics card. You can also contact the manufacturer for assistance on this issue.

  Support for drivers &

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• Catalyst Control Center host Application has stopped working

  I get this promt twice when I start the computer. I tried something that has been recommended who was clicking on tools in CCleaner and see if it was on the list that he was. I deleted it then as recommended but the guests still appear.

  Check these related discussions

  Catalyst Control Centre: host application has stopped working - Windows 7 Pro
  Catalyst Control Centre: host application has stopped working disk failure / hard
  Catalyst Control Centre: host application has stopped working
  Catalyst Control Centre: host application has stopped working
  Catalyst Control Center has stopped working: the Application host

• How can I fix monitor control center catalyst which has stopped working?

  This program has stopped working & therefore a Driver Detective

  Hi foxy1948

   

  1. did you of recent changes on the computer?
  2. for how long have you been faced with this problem?
  3. what happens when you try to use programs? Do you get any error messages?
  4. have you tried to reinstall the programs?

  The catalyst control center monitor and driver detective programs are non-Microsoft programs. So, you can even try communicating with the support of the manufacturer for assistance in case the problem is only with these programs in particular.

   

  I hope this helps.

• How can I fix windows 7 Catalyst control center host application has stopped working

  I received the error: Catalyst Control Centre: host application has stopped working. I uninstalled the Device Manager Catalyst Control Center and restarted - after uninstall and reboot I got the same message saying: Catalyst Control Center: the host application has stopped working - I also checked for driver updates in the Device Manager and the device manager says my driver updates are up-to-date.

  I just received a response from AMD for a known issue with Catalyst Control Center and Windows 7.  You can go there.  It worked for me the first time after a lot of troubleshooting.

  How to solve the CCC is not loading/opening at initialization.

  Scenario: the user tries to open/load the CCC through different methods, but it does not load. The problem may occur without any changes to the system or a Catalyst driver update or reinstall. This is issue mainly affects Windows 7 machines.

  Cause: possible corruption of the Windows Global Assembly Cache (GAC). Usually, this requires the user to format and reinstall Windows.

  Resolution: this solution has been tested - reproduced and resolved.

  Remove all the ATI through programs and features in Control Panel using the Manager to install Catalyst (GPC). Restart the system in safe mode and follow these steps:

  -Remove all ATI C:\programs files files and the C:\programs files (x 86)

  -Go to the C:\Windows\assembly and sort by "public key token. Locate the following key token public "90ba9c70f846762e" which is

  -associated with ATI. Usually only 2 entries. Remove 2 entries. Note: entries should be deleted (right click and select uninstall) since regular safe mode

  -mode may cause a permissions error. 2 entries appear only in the systems concerned by this issue. This means that you want the 2 inputs on systems where the CCC charges, the entries do not exist.

  -Close and restart normally.

  -Reinstall the ATI Catalyst package.

  I hope that you will get in working order!

• After the error message with computer-media center Scheduler etc has stopped working

  Original title: 8 boxes

  On separate cards on top of each other - they look like maps of correspondence-is this news centre Media State media stopped services aggregator, the drawer module igfx has

  order, hkcmd module has ceased, HD audio Panel has stopped working, Task Scheduler engine stopped working, a persistence module

  stopped working, sink to receive asynchronous callbacks for WMI client applications has stopped working.  They appear after the computer was during one

  While using the Internet, Facebook, please help.

  Hi sue them.

  ·         Did you do changes on the computer before the show?

  ·         Exactly when you receive the following errors?

  ·         What web browser do you use?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to start in safe mode with network and check if the similar problem occurs in safe mode.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

   

  Method 2: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• My laptop is telling me: media center tray applrt has stopped working, how do I fix?

  Media cenetr tray applet has stoped working. How can I solve this getting very tired of this.

  Hi Lynn,

   
  You have made any changes to your computer recently?
   
   
  I suggest you to follow the steps and check if it helps.
   
   
  Method 1: Perform the check and the boot if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   
   
  Method 2: Data store to remove Windows Media Center. To do this, follow the steps mentioned below

  (a) exit any running instance of Windows Media Center.

  (b) delete the file from media Center DataStore.db. By default, this file is located in the following location:

  (c) %SYSTEMDRIVE%\ProgramData\Microsoft\eHome\mediaCenterDataStore.db

  To remove the file, follow these steps:

  (d) click on start, then run.

  (e) in the Open box, type run and then click OK

  (f) If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  (g) in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.

  (h) in the Details pane, right-click media center datastore.db and then click on remove.

  (i) click Yes to confirm that you want to move the Mediacenterdatastore.db file to the trash, and then restart your computer.

  (j) to start Windows Media Center, and then check.

• Notifications Facebook has stopped working

  Hello!

  I updated to El Capitan a few days ago and since then I don't get the Push Notifications to my Notification Center whenever I get a Facebook Messages. Other Notifications are still working fine. Facebook is still in my accounts & Internet settings and Notifications are enabled, but I still don't get the Notifications.

  I hope someone can help!

  Thank you!

  For some reason, disable the activity on Facebook and remove the account and then setting up everything from the beginning

  worked and solved the problem.

• Network notification icon has stopped working

  Network notification icon no longer changes when the connection has been established.

  Hi Rob

  Sorry about the lack of response in these few days, but I had a bad cold.  However, there are some good news to report.  I don't have the chance to try the suggestions you made, but this morning I received an update from my security software Norton 360 and after installing this update and run some scans (including cleaning registry) in order to ensure that all seemed to agree, my network notification icon now works again!

  If the problem has been solved somehow, and I may never know the real cause.  I hope I never have to try to find out again!

  Many thanks for your help anyway.

  Concerning
  Phil

• The Catalyst Control Center host application has stopped working

  This message came with an update of Microsoft about April 2014. I am running:

  HP ENVY Notebook PC m6

  D5F64PA #ABG product name

  8.1 Windows 64-bit

  Map chart Intel(r) HD 4000 and AMD Radeon HD 7600M series

  Please tell us how it can be solved for my setup. I have read other posts, but am looking for a current solution.

  Hello

  Welcome to the HP Forums

  Have you tried all troubleshooting as of yet on this issue? My first suggestion would be to install the latest display drivers of AMD for laptop you.

  Latest AMD drivers:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-118023-1&CC=au&DLC=en&LC=en&OS=4158&product=5358584&sw_lang=

• Catalyst Control Center has stopped working

  Downloaded a virus, ran malwarebytes and microsoft security essentials. After starting a message that Catalyst Control Center host app has stopped working.

  Hi StephanieHillman,

  ·         Not Malwarebytes and Microsoft Security Essentials has removed the virus from your computer?

  Follow the suggestions below for a possible solution:

  Method 1: If you want Catalyst Control Center application on your computer, and then visit the official website of AMD and download the Catalyst Control Center tool.

  Method 2: If you do not want this application you put the computer in a clean boot state and disable some startup items.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned at step 7 of the article mentioned above.

  Let us know if this information useful.

• Control Center cataslyst error "the host application has stopped working".

  Hello

  Is anyone know the cause & how to fix error "catalyst control Center - host application has stopped working"?

  Hello

  1. when exactly you get this error message?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  Method 2:
  Try to update the latest drivers for the graphics card and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• AMD VISION engine control center does not work and catalyst control centre: host applaction has stopped working

  I have a new office is a little more months engine control center .the AMD VISION does not and catalyst Center: applaction host has stopped working .it jerks-tally stops my computer to the low .he don't crash dumps and don't keep a desk top image or screen saver

  For the AMD Vision Engine Control Center

  Ensure that the .NET Framework 3.51 is enabled.

  Click Start, type: enable or disable windows features

  Press enter on your keyboard

  Check the .NET Framework 3.51

  Click OK

  Restart if prompted.

  -------------------------

  Update to the latest drivers and if any news re-install ones you have.

  Verify support with the ATI drivers (manually), and their forums as their problems could be known.

  Download the Catalyst Drivers here
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  ATI - Forums
  http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

  ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  Credit: Rob Brown [MS - MVP]

• What should I do if my computer Action Center message says: "your Intel Graphics Driver has stopped working twice?

  My computer message of the Action Center said: "your Intel Graphics Driver has stopped working twice?

  What should I do to solve the problem?

  Hello AletBotes
  Try to uninstall the old version of the graphics driver Intel or by reinstalling fix it. It is always best to update the drivers to the latest version you can find on the website of the manufacturer of the computer. If you have no problem with the video/graphics and if the Action Center message bothers you in any way, you can turn it off in goin to this place the Center Items\Action Panel\All Control Panel control and then in the left pane click on change Action Center settings > uncheck the required Notification or uncheck everything. Click OK. That's all.

• Error: "Windows Media Center has stopped working. Windows is checking for a solution. "when tried to open it after installing the KB983590 update

  Original title: WMC no longer works after update of August 10

  Windows Media Center has stopped working after installation of my Windows 7 Professional pc all 11 updates gave me on August 11, 2010. I used system restore to the day before the updates, and install them individually. The first 9 no trouble with WMC. But the IE8 KB982664 for Windows 7 compatibility view list caused my action center to report that I needed to check the undeclared solutions to problems. WMC would still start. But after installing KB983590 .NET framework 3.5.1 for Windows 7 x 86, WMC has stopped working.

  After you uninstall update 2 above WMC would still not start.

  After using the system again restore forward updates, I installed the other 9 updated with, so far, no problem with WMC.

  New installation of Windows 7 Pro.

  V.1.0.1963.0 MSE completely up to date. [have not installed the latest beta version due to this problem]

  Former pilot Mig15. Now using Windows 7 Professional and Project Professional 2010 Beta.

  Hi Davy-D,

  Step 1: Perform the upgrade on the spot
  a. close all applications, insert the DVD into the DVD drive of the computer.
  b. in the settings window, click install now.
  c. click go online to get the latest updates for installation (recommended).
  d. type the CD key if you are prompted to do so.
  e. click Yes to accept the Microsoft software license agreement.
  f. on the type of installation do you want? screen, click upgrade.
  g. when the installation is complete, restart your computer and check the difference.

  See Method 2 of this article: http://support.microsoft.com/kb/958044/en-us

  Very Important: Run a repair installation will not damage files and applications that are currently installed on your computer. However we recommend that you back up data, performing the steps incorrectly can delete data.

  Visit our Microsoft answers feedback Forum and let us know what you think.