Activate the authorization mode failed.

Similar Questions

• Satellite P100: How to activate the AHCI mode?

  As all you know, some laptops P100 series are equipped with a controller Intel 82801GBM SATA natively supports the AHCI and with a Fujitsu HDD which takes in charge the NCQ.

  However, the disc is forced in compatibility mode, and therefore the NCQ is disabled, resulting in a loss of performance (which is certainly necessary that laptop hard drives are generally slower than those of office).

  Unfortunately, there is no option in the BIOS which activates the AHCI mode and no tool like HWUtility that can twist that (although it wouldn't work). As far as I know, newer laptops support AHCI mode and there is also an option in the BIOS to enable it.

  Is it possible to activate the AHCI mode in our laptops beloved and make the most of our hard drives?

  Hello

  Do you think that the AHCI is disabled?
  You can run the Intel Chipset ID utility to determine if the ICH7DH SATA controller is already running in AHCI or not.

  However, I studied a little more on other forums that are a little more specific and find this:
  Activate the AHCI on Intel chipsets, without having to reinstall Windows 2000/XP
  http://www.Neowin.NET/forum/index.php?showtopic=457699
  and
  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-62909

  But you know, everything you make are at your own risk!

• HP 8100 - can't activate the draft Mode.

  Hi, I bought a HP 8100 Pro printer a few weeks ago and I can't try to activate the "Draft" mode with it.

  When I try to activate the draft mode I and get an error of type message conflict.

  I am running Windows 7 and the HP is connected via a USB cable.

  Does anyone know what I need to do in order to print in the project?

  Thank you.

  Rick.

  

  Well, I have not installed the software yet, but after looking at your screenshots that I came up with an idea and the bear with me, after all, it's just an idea, it cannot be the solution.

  We will select plain paper, uncheck the Custom box, choose Project then select Custom and check that the paper is still paper, if it is not try it back. Then try to select the quick project in advanced settings.

  I notice that the parameter that you currently have is best, I wonder if it is maybe what is in conflict with the output quality.

  Let me know weather this fixes the problem or not, if not I'll install the software and get this figured out for you.

• Activate the VCA Mode of VMware vCenter Server Appliance

  Hello

  I'm pretty new on vSphere.  I have two hosts running esxi 5.1 what one of these hosts running the "VMware vCenter Server Appliance' with vSphere version 5.5.  I currently have a single cluster containing all the VMS as well hosts and the SAN.

  I try to activate the EVC mode, but when I try it tells me that the host is not allowed because there are powered on virtual machines.  I can turn off all the virtual machines except the vCenter device and I still get the problem on the host that has the device on it.  If I turn off the unit, I can't use vSphere to activate CVS.

  How can I activate CVS when vSphere does not work?

  Thank you

  Jeff

  Hi Welcome to the communities,

  This one is a bit complicated

  You have:

  1. turn off all VMs on Host1 (while vCenter device is on Host2)

  2 bring Host1 on Cluster, select CVS clustered.

  3. put all the virtual machines on Host2 (also vCenter device)

  4. connect on Host2 directly to vSphere Client Windows

  5. remove the vCenter inventory unit

  6. connect on Host1 directly to vSphere Client Windows

  7. the data store when the appliance and add it to the inventory of research. Power on

  8. connect the device with Web client or vSphere vCenter

  9. move the second host in the cluster

  And you're done

  Concerning

  Tim

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• Activate the night mode shift

  Hello world

  Is it possible to get the night shift enabled mode low power?

  I do not understand why Apple did it, cause I don't think not that night shift uses a lot of battery.

  And it's very annoying getting the white screen again when you activate the mode for low-power in the middle of the night.

  There is something to do: activate the low power mode and ask Siri to the night shift.

  Of course, I don't want to shout "HEY SIRI!" while my wife sleeps next to me.

  Sorry if my English is a bit odd, I'm french.

  Thank you

  I tested and it doesn't seem to be possible to have the night shift active in Low Power mode. Low power mode cancels simply night shift.

  Why / what Apple does what they do is to Apple. We cannot know the answers that we are fellow users like you. You can provide your feedback to Apple here:

  http://www.Apple.com/feedback/

• How to activate the log mode archive in oracle database 11 g 2

  Hi all

  I hope that you all are doing well.

  I want to activate the archiving log in my version of the database 11.2.0.4.0 safely.

  Why safely because my database works fine now.

  Windows 8.1 - OS 64 bit.

  Please provide the correct steps

  so that the work of database and schema can not lose more after that the archive log is enabled.

  Thank you all for your response.

  I followed the thread How to archivelog mode

  Measures

  -----

  SQL > archive log list

  SQL > show parameter db_recovery_file

  SQL > alter system set db_recovery_file_dest_size = 10G scope = the two sid ='* ';

  SQL > shutdown immediate

  SQL > bootable media.

  SQL > alter archivelog database;

  SQL > alter database open;

  She is successful.

• I did a clean install of Windows 10 PRO - how can I activate the desktop mode

  Before I did the reinstall - I had this option when I right click on the task bar to activate the battery icon desktop mode.

  If someone please tell me what a piece of software that I should download to re - activate?

  Thank you!

  There is no Quickset software for this particular laptop - so I went through every download on http://www.dell.com/support/home/us/en/19/product-support/product/alienware-15/drivers and I finally installed "Alienware on Application of on-screen display" - after the restart it was back.

  However, it is not really intuitive.

  Thank you ieee48 and Mary G for big ideas.

• Pavilion 15 p204tx: activate the AHCI Mode

  I want to replace the existing hard drive in my laptop with an SSD. While reserching on this subject, I learned that I need to change the SATA Mode from IDE to AHCI Mode. I tried to find this setting in my BIOS, but I wasn't able to find it. I would be grateful if you could help me with this.
  Thank you!

  Hello:

  The drive of your laptop is already set to AHCI in the factory and cannot be changed in the BIOS.

• Can not activate the silent mode

  Until today, I could turn my z5 and deactivate the silent mode by pressing the volume button. Now when I do that, it changes the volume of media rather than the volume of the phone call. The only way I can turn the mute phone is going through settings etc which seems ridiculous. Anyone know the other shortcuts?

  If you have the application open phone or music or media and you press the volume button the volume will turn upwards or downwards. You can press the volume key, then press the icon on the top right, a menu will appear.

• Activate the Promiscuous Mode on a vswitch

  I'm creating a new virtual machine... Cisco 3300 ISE. In the instructions, he told me to make sure that "Promiscuous" mode on the vswitch. If I enable this, will it screw up one of my other virtual machines that are currently using this option? I am using vCenter 5.0 with ESXi 4.1

  Thank you

  No, it shouldn't - you can also create a separate virtual machine port group and just activate for this group of port promiscous mode and not put overall vswitch

• How can I activate the Tablet mode for kindle fire

  I loaded Firefox on my Kindle fire from an FTP site and seems to work.
  Firefox site indicates that the Kindle fire uses the default mobile mode and to have a Tablet mode by default see below but nothing is there.

  You can type about: config in the address bar and use the filter to find browser.ui.layout.tablet. Select it and use the arrow buttons to change the value to 1.

  This is an unsupported configuration and may cause an unusable interface.

• activate the AHCI mode on Envy Dv7 - 7398ca with SSD

  Year old i7 envy Dv7 - 7398ca notebook with SSD Samsung 840 Pro x 256.  Windows 8.1

  I've updated to the SSD shortly after I purchsed the laptop.

  No problem except the Samsung SSD Wizard software keeps tagging me as AHCI mode is disabled and must be enabled and I do not see it in the BIOS.

  Or I see anything that relates in the device as IDE Manager or other.

  It seems that the SSD is optimizing not itself based on the fact that it considers that AHCI is disabled.

  I apologize for the issue being this topic seems to be beaten to death over time, but I do not see what relates to this model or similar.

  Thanks for all the ideas.

  The system is set to ahci or RAID mode. You can tell that by opening the Device Manager and look at the storage controllers. Anyway it is optimized for SSDS and TRIM is activated. You can simply remove the program from Samsung and rest assured that your SSD is optimized.

• Impossible to activate the 3d mode in Ps CS6

  I'm new to photoshop and trying to learn how to use the 3D functionality but am not able to get a 3D mode to even turned on.

  Here's what I do:

  1. new layer
  2. Select the text tool
  3. Click on the screen, type 'Hello '.
  4. Highlight the text
  5. Select 3D in the drop down menu, but only "to get more content" is available

  What I'm doing wrong here?

  Thanks for your help!

  I work with:

  • Photoshop Extended v13.1.2 x 64

  on a new iMac

  • Processor 3.2 GHz Intel Core i5
  • Memory 8 GB 1600 MHz DDR3
  • Graphics  NVIDIA GeForce GTX 1024 MB 675MX
  • Software  OS X (12-2037) 10.8.2

  The GPU seems to be off.

  

  1 cmmd K open Pref.

  2. check "use the graphics processor.

  3. exit the PS

  4 stimulus (not necessary but probably recommended)

  5. now try your steps.

  If

  the Pref is grayed out that average PS think that something is wrong with your GPU.

  Try cmmd preferences reset zero + alt + shift after the launch and delete the Preferences dialog box and then click OK.

  Then see if the pref is always grayed out.

• Why do I lose Audio when I activate the Multicam mode

  I'm tryin to edit a multi angle concert. All Audio works fine until I did a right click my files, go to several cameras and click Activate. Then my audio plays more. I have ' Audio follow video ' selected in both reading muli-cam monitor. If I disable multiple cameras on the audio files works again. Help, please. I sent the audio mixed/mastered far and want to get all my video editing done for when the file is back on Monday.

  You must activate all audio tracks. See the following page: http://helpx.adobe.com/content/help/en/premiere-pro/using/editing-multi-camera-sequences1. html #id_60276