Activation of material virtusaliztion on HPE H8-1020
I have a HP H8-1020 with processor Intel Core i7 - 2600 s.
BIOS: FRIEND 7.16 05/10/2011
Tip: PEGATRON CORPORATION 2AC2 1.02 (HP refers to it as Carmel)
I checked the Intel Web site for the specification for this chip, and it says that it supports Intel Virtualization Technology (VT - x), but I can't find any setting in the BIOS to turn on hardware virtualization.
I downloaded and installed the updated BIOS for this computer today.
My problem can be reduced to two questions
1. this computer HP does hardware support for virtualization?
2 if so, what to do I have to do to get the parameter appears in the BIOS so I can enable >
Thanks in advance for any help you may be able to give me.
Hello:
See if there are VT setting in the BIOS of your PC as pictured below...
Tags: HP Desktops
Similar Questions
-
HP pavilion hpe h8-1020: evga geforce gtx 950 in hp pavilion hpe h8-1020
Hello guys I have a hp pavilion hpe h8-1020 and I am looking to upgrade to a nvidia gtx 950 is it compatibile, what I need to supply?
Hello
There is a unknown specification for your motherboard that will prevent you from installing a new 3.0 PCIe x 16 graphics card. Maps 3.0 is backward compatible with PCIe x 16 2.0 slots. Your motherboard may have a PCIe x 16 1.0 slot. None of these options below works on your PC if you have PCIe x 16 version 1.0
The Radeon HD 6570, an option to purchase, is a PCIe x 16 card USB2.0. You can have a 2.0 slot. It is unclear when we look at the characteristics of HP for your PC.
I got a HD 6570. You could not install drivers from AMD with the version of HP of this card. You need to use the HP drivers. It is possible that this card is not a 2.0 card even if the consumer version is a USB2.0 card. We can only guess.
MSI is rolling out hybrid Nvidiacards soon. Try anything tangible yet seen. NVIDIA is slowly releasing the 1000 series cards that require less power. Maybe some OEM will also include hybrid versions that will work on your PC any time.
The 900 series Nvidia graphics cards need the UEFI BIOS.
Your PC has a legacy BIOS.
You have a 300 Watt power supply. You will have to upgrade from food to run a card AMD and respect the strict minimum if you can install a TG 640 GDDR5 map.
You may be able to install (you need a PCIe x 16 slot 2.0) Nvidia 600 series cards or watch hybrid of AMD cards by Sapphire.
AMD cards are longer and require larger power supplies.
You should check that you have the power and the room to install two graphics cards. The cards are also double slot. You will need to verify that you can install a card double slot. Even once, you need a PCIe x 16 slot on the motherboard 2.0.
See you soon!
-
I have a HP Pavilion HPE h8-1020 desktop PC which firewire card must be installed
I have a HP Pavilion HPE h8-1020 desktop PC, which firewire card can I install?
This widget could not be displayed. -
HP pavilion hpe h8-1020 update graphic card
I am running Windows 7
The processor is Intel Core i7 - 2600 s
Can I put my card a Radeon HD 6570 graph without changing anything else, and whether it will improve the game on the computer.
Also in the affirmative, what would you recommend.
Thank you for your time and consideration
Thank you very much!
-
Active not material Mercury playback engine
I am a novice first pro CS5 user (Beginner) and bought the next video card:
MSI N470GTX Twin Frozr II NVIDIA GeForce GTX 470 (Fermi) 1280 MB 320 - bit GDDR5. The 470 is on the compatibility list.
When I opened the Premier and go on:
'project' / 'settings of the project' / 'general' - and go to the bottom of the menu, the selection for the equipment / engine software mercury playback engine is grayed out, and it is in the mode of selection of software. I can't use the drop down menu to change equipment. I've updated my NVIDIA driver directly tonight too and that did not help. Is there something I need to add (software) or something I need to change to make it work? I read a post where they said I needed to load the CUDA SDK to work (from NVIDIA). I forget something basic here to make this work?
Thanks in advance...
That should fix it. Read here: Premiere Pro CS5 (5.0.2) update: bug fixes and support CUDA "Premiere Pro workspace .
Premiere Pro CS5 (5.0.2) for Windows also supports the following graphics cards speed up using CUDA on GPU technology: GTX 470, Quadro 4000 and Quadro 5000.
Yes, it's for 5.0.2 but which is included in 5.0.3 (current) as well. Your card is "official." just need to the appropriate platform.
-
Error No. Boot Disk was detected or the drive failed - h8-1020 Desktop
1 hp pavilion HPE h8-1020
2. windows 7 64 bit
3. Realtek PCIe GBE Family Controller series v2.38 24/12/10
Error: No boot disk was detected or the drive failed.
4. no changes to the system.
After I restarted my computer about 7 times it finally started, so for me to be able to write this message. However, this problem occurred several times over the last week or two. I get a blue screen, then the computer goes into a splash screen and I get the above error. Of course, I'm 2 months past my warranty period, so I'm here, GROUND.
Is my hard drive on its way? Is there a possible difficulty for this seizure completely breaks down? Information to help save my machine would be great and much appreciated. Thank you!
P.S. I ran a diagnostic and all past test except the bootable disc. But for some reason when I restart a little more time it get passed my system and begins running.
Note: I created recovery discs and I backed up all my files.
Hello:
In my view, there is nothing you can do to repair the drive except to replace it.
You can run the checkdisk utility and check both boxes.
Please see the link below for more information.
http://www.w7forums.com/use-chkdsk-check-disk-t448.html
Please understand that this will only delay the inevitable at best.
Paul
-
Here's my situation: I installed an oem version of Windows 7 on a computer, I've set up - downloaded all the updates. I have not activated yet. Now I changed my mind about the operating system I want to install on this computer. Because the software was not enabled can I remove and install in the future on another computer? Or Microsoft knows somehow I installed the operating system on a computer, even if I do not activate it.
Only the activation records material signature in the Activation of MS servers to compare to reinstall or check the real. What you have now is an installation not enabled with probable 30 days to activate.
You are wise to wait to be sure because once the OEM version is activated in the EULA, it can be moved to another motherboard. However since OEM became the only Windows 7 Home or Pro version available there are some reports of agents activating MS make exceptions to move with a good cause. But this cannot count on.
-
Upgrading motherboard and CPU, can I keep the case?
Hello
He was considering upgrading my motherboard and processor in my Pavilion HPE h8-1020 with a motherboard ASUS Rampage Gene IV and a processor Intel Core i7-3960 x but I have two questions:
(1) even if the mother is form Micro ATX factor, (supposed to be the same as the case form factor I've had with my h8-1020) will be the motherboard in the case so they still features with card readers, USB ports and LED?
(2) Will Upgrading the major portions of my PC problems for the Original (Windows 7 64-bit) operating system that currently reside on my hard drive?
I love the current aesthetics of my case and the system. Hoping I can keep most of the features I currently have. Thank you, your help will be greatly appreciated.
Hello
Look at models of bolt between two motherboards. The i/o HP plate will not work with the ASUS card sort should use the i/o ASUS plate (hope it fits). The ASUS Q-connector will help your with the front pin but write down it to the bottom of the function for each connector.
Case diagrams should not be done.
-
Hello!
I currently have a HPE H8-1020. I want to update the motherboard that the current only supports up to 8 GB.
My PC has two USB ports that are on top of the PC that are connected to the motherboard via a cable to a small white port (I don't know the name of the port, but I know that's not a SATA port). When I replaced my graphics at the beginning of the year, I've noticed this and struggled to find the right port to plug in again after disconnnecting it. It works fine now, but I was wondering if another motherboard would have the same port to connect two additional USB cables because I need to use.
Thanks in advance,
Billy N.™
My specs:
Intel i7 - 2600 K 2.8 GHz
EVGA GT640
8 GB Ram
Windows 7 64 bit
1 TB harddrive
PSU Corsair 500CW
Billy N.™PS/2 ports can be removed when you install the new Board of Directors.
As far as I know, you have watched one should be fine.
-
HP Support Assistant will not work.
Desktop HP Pavilion HPE h8-1020
Win 7 64 bit,
HP Support Assistant will not work. I get the following:
HPSF.exe has stopped working, the application has encountered a problem and needs to close
I downloaded and installed the latest updates, but it has not fixed the problem.
Can someone please help?
Thank you
Hello
Try the following
Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
When this has completed, restart the computer.
Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.
http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html
After installation, restart the computer again.
Kind regards
DP - K
-
HP Pavilion HPE h8-1020
Windows 7
Computer starts and stops on the ESC press for more boot options screen. No beeps. ESC does not work.
This day-
1 disk hard disconnected; no luck
2 disconnected memory in different order (2 sticks of 4 GB each); no luck
3 tried another power supply; same thing
4. tried a different keyboard/mouse; no luck
5. removal of discrete video card and used video mobo; no luck
Notes:
-When I removed both sticks of memory, had beeps acknowledging memory was gone
-When I didn't have a keyboard is plugged in, it recognized keyboard missing
Suggestions?
Thank you.
Darryl
The steps you have taken to solve the problem would lead me to believe that the motherboard no longer works correctly.
You observe a code flashes when you press the power button? a flashing red button would indicate systemboard failure.
On-screen error messages?
You can try to recover the BIOS. Follow the procedures on this document from HP web compared to the version of the BIOS that has your PC. In case of recovery of the BIOS, then all should be well. If this isn't the case, then it is time to get a replacement PC. You can recover data from a hard drive on the computer when you install in another PC under Windows.
-
Computer does not start after installing a new graphics card
I am owner of a HP Pavilion H8-1020 with a processor intel i7 - 2600 s Windows 7 and am trying to upgrade my Radeon hd 6570 to a Gigabyte AMD Radeon R9 280 OC. I improved my diet for a Corsair CX750 to meet the requirements of power and installed with number. After the installation of the new card, which as far as I can tell is well seated in the pci slot and correctly connected to the PSU, my computer does not start.
System powers on, all fans of begin to run including the fans on the new graphics card, but it does not begin the boot process, no entry is received at my monitors, no light on the keyboard, my OS starts loading, I can turn off the system without the delay that will flow normally. Then I reinstalled my old graphics card and the computer started as usual.
Now, assuming that the card is not DOA, which unfourtunatly I have no way to verify, and I'd like to see if it could be another problem before going through the process of restitution. I did some reading on the internet, which helped, but did not help for a technological neophyte like me. Now, I know a few things that could cause this problem but lack the necessary skills to determine what question is making me. What I've read, these could be possible questions:
1: my new graphics card is not compatible with my motherboard. It's something I know now that I should have checked before buying and something I should theoretically be able to do it now, but I am at a loss on how to do it. My card is compatible with my motherboard?
2 could be a BIOS problem. I updated my bios driver with the version provided by the HP site. I am running FRIEND 7.16 05/10/2011. And from what I've read it might have something to do with my bios to UEFI mode and I would need to go to a legacy mode so he can recognize a new device, is it true? I am extremely wary of messing with my BIOS settings for fear of bricking my system. How can I check my current BIOS settings are and what I should change and how would approach I change them? Will one of these changes affect my system if they are not what is not causing the problem?
In addition to these issues, anyone know any other matter which may be the cause of the problem that I should look for? Thanks for any help.
Hello @Eric_Z,
I can see why you are having problems with your new graphics card, and to get to the fast response that your motherboard is not compatible with the new graphics card that you have purchased. And here's why.
Your motherboard according to the page HP Pavilion HPE h8-1020 Desktop PC product specifications is the Carmel motherboard, which has the following expansion slots:
- A PCI Express x 16
- Three PCI Express x 1 connectors
- A PCI Express Mini Card x 1
As there is no version indicated for your PCI Express x 16 it slot means that it is version 1.
Now, your previous graphics card was a PCI Express 2.1 x 16, which means that it was version 2 and compatible with your PCI Express x 16 slot on your motherboard. However, the new card is PCI Express 3.0 and will not work in your motherboard due to a compatibility break. While the technology is supposed to be compatible there are many cases where it is not, and I'm afraid that you meet one of these cases.
I am offering an overclock.net article entitled: the final answer to the controversial compatibility of PCIe x 16 version. where your situation has been tested and examined.
I hope this helps. Have a great day and thank you for display on the HP Forums!
-
Strange behaviour of PIX - cannot access all protocols from high to low security
I have a 515 with four active interfaces (material of three and a VIRTUAL local area network). I have a DMZ interface with security level equal to 6. Inside network (Security 100) I can only access hosts on the DMZ using the HTTP protocol. Ping and telnet do not work while they do not work when I am connected directly to the network DMZ. The DMZ network is flat and all the guests have the PIX as their DGW. Here is a copy of the current configuration. Am I missing something? This shouldn't be so hard!
Thank you
6.3 (4) version PIX
interface ethernet0 car
interface ethernet1 100full
logical interface ethernet1 vlan11
interface ethernet2 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
nameif ethernet2 grandhome securite6
nameif vlan11 comments security99
hostname DBADAPIX
clock timezone IS - 5
clock to summer time EDT recurring
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
Name xx.xx.167.101 QualityAirPC_OUTSIDE
name 192.168.100.90 QualityAirPC
rdvvpn ip 172.18.34.0 access list allow 255.255.255.0 192.168.1.0 255.255.255.0
172.18.34.0 IP Access-list sheep 255.255.255.0 allow 192.168.1.0 255.255.255.0
outside_access_in list access permit tcp any host QualityAirPC_OUTSIDE eq https
pager lines 24
opening of session
timestamp of the record
debug logging in buffered memory
Logging trap errors
ICMP allow all outside
ICMP allow any inside
Outside 1500 MTU
Within 1500 MTU
grandhome MTU 1500
IP address outside xx.xx.167.97 255.255.255.248
IP address inside 172.18.34.1 255.255.255.0
IP address 192.168.100.1 grandhome 255.255.255.0
Comments from IP 192.168.10.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
ARP timeout 14400
Global 1 interface (outside)
interface of global (grandhome) 1
NAT (inside) 0 access-list sheep
NAT (inside) 1 172.18.34.0 255.255.255.0 0 0
NAT (grandhome) 1 192.168.100.0 255.255.255.0 0 0
NAT (guest) 1 192.168.10.0 255.255.255.0 0 0
static (grandhome, external) QualityAirPC_OUTSIDE QualityAirPC netmask 255.255.255.255 0 0
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 xx.xx.167.102 1
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp - esp-md5-hmac rdvvpnset
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
rdvvpnmap 10 ipsec-isakmp crypto map
card crypto rdvvpnmap 10 correspondence address rdvvpn
card crypto rdvvpnmap 10 peers set xx.xx.71.66
rdvvpnmap crypto 10 card value transform-set ESP-DES-SHA
life safety association set card crypto rdvvpnmap 10 seconds 43200 4608000 kilobytes
rdvvpnmap interface card crypto outside
ISAKMP allows outside
ISAKMP key * address xx.xx.71.66 netmask 255.255.255.255
ISAKMP identity address
part of pre authentication ISAKMP policy 10
encryption of ISAKMP policy 10
ISAKMP policy 10 md5 hash
10 1 ISAKMP policy group
ISAKMP life duration strategy 10 86400
dhcpd address 172.18.34.100 - 172.18.34.199 inside
dhcpd address 192.168.100.100 - 192.168.100.109 grandhome
Dhcpd address 192.168.10.100 reviews - 192.168.10.199
dhcpd dns 64.x.37.x.39.140.42
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
dhcpd allow inside
grandhome enable dhcpd
Comments enable dhcpd
to allow pings to return, you must allow traffic. It is not allowed by default.
apply the acl to the dmz interface in.
access-list dmz-> in permit icmp any any echo response
access-list dmz-> in permit icmp any one time exceed
access-list dmz-> in permit all icmp all inaccessible
If you try to ping at the interface of the demilitarized zone from the inside, you can't. Telnet to this interface is not allowed either unless through an ipsec tunnel. You should be able to telnet to a server in the zone demilitarized without problem.
-
Remote access to public folders - password
On this HP Pavilion HPE h8-1020 desktop computer, I want to access the public folders to another system that connect wirelessly to the network. However, I would like to restrict access to the only people who have a password. I was able to enter 'Network & sharing Center' in the 'advanced sharing settings' section and deselect the password option, which allows the connection of a computer to another, but would also allow someone on the street to access these "public" folders These records contain information that is not really public. How can I determine the user name and the password to use when I re - select the password option?
I have not implemented 'users' on each machine. Maybe it's the access protected by a key. ???
This issue has been resolved by my realization that the Wi - Fi protected by, only those who have permission can also access these "public" files Since only those who authorize have access to this same address wireless, it is unlikely that others would be able to view these files.
-
Hi guys,.
I recently received some actions and progressed to install as I did with actions in the past... Put them in the file of the photo effects, then go to the locale folder and delete the file MediaDatabase.db3. (I'm on a mac, in the case that it is different for the PC).
He's worked in the past for me, but for some reason, the last time I tried, the content library and effects would not rebuild. He got 75% done and then frozen.
Fortunately I had kept an old MediaDatabase.db3 file to the case where that ever happened. So I just deleted the unfinished MediaDatabase.db3 file and put the old one back in the folder and opened 10 items. Items 10 open, but then wouldn't let me use all the menus. I got the death spinning beachball.
I don't know what happened... like I said, I have nothing was out of the ordinary and it worked for me before!
Any suggestions? Short of completely reinstall the elements (which I don't know even if I do, since I've only got an activation code when I bought it.)
Thank you in advance!
Yes, you can reinstall the PES, but that shouldn't be necessary. Activation related material is so it is not serious, and uninstaller gives you the ability to disable during the uninstallation. Try to remove the mediadatabase once again, and this time also delete thumbsDatabase.db3, which is in the hard drive > library > Application Support > Adobe > Photoshop Elements > 10.0.
That's assuming this isn't the app store version. Is it?
Maybe you are looking for
-
Need drivers after installation clean win 7 on win 8 machine
Curve minimum smarts learning difficult for an old man with a computer. Try to restore a HP 500-075, which came with Win 8 installed and upgraded to 8.1. A day after the reboot, I couldn't past password logon screen (I had not created one). After muc
-
I bought a new concole. I transferred all my data, except the pfofiles of xbox live. It does not accept my password or security question answer. I don't get a password reset email.
-
RemoveElements/InsertElements
Is it just me or is an abomination and a string parameter that is passed to an array index? WTF? I hope I'm missing something fundamental for why it must be like that. However, you can only pass parameters like '[0]' to this feature or am I simply
-
Wireless connection is slower than the hard line on WRT54G. Why?
I adjust the wireless connection Base rate: all THE Transmission rate: 54Mbps It is still slow as a wired connection. Is this because the WEP security settings? Best regards Chen min
-
Need to reinstall win 8.1 after a disk crash
After an accident, I need tot reinstall win 8.1. There is no disc supplied with my XPS 8500. If I want to download the software preinstalled on Dell support website, it seems that there is nothing happening. On my Dell there is also a kind of key OEM