Wireless connection is slower than the hard line on WRT54G. Why?

Similar Questions

• Windows 8 cursor jumps in the existing text and continues to type here rather than the finish line that I am on, anyone else spotted the same thing?

  Just upgraded to Windows 7 to 8, using MS Office Word 2010, worked well on Win 7, but now type text and the cursor suddenly jumps into the existing text and continues typing, rather than the finish line that I'm on.  Thought, I was accidentally touched for touch pad or other keys, so now consciously look for this but can find nothing on my part.  Have experienced it before with a processor OS Linux and Open Source, when the OS has been updated.  Think there may be a loophole to WIN 8.  It also happens when keying in the screens like this, that has happened twice while here. Someone else spotted the same thing?  Or is it just me?

  Also, anyone know how to disable "Open Tap" on the Mouse touchpad of the notebook, its annoying, I could disable in WINDOWS 7 but cannot know how Win8.

  Thank you very much for your help, the setting was not really there, but you gave me the name of the device, so I was able to download the right driver from

  http://www.Synaptics.com/resources/drivers

  above mentioned just in case anyone has the same problem. The site recommend to go with the hardware vendor's website, but ASUS has wrong driver, one of the above works fine.

  Its such a relief to be able to settle this problem - THANK you

  Lets see if it sorts the problem MS Office too.

• The "N" wireless Internet speed is 30 to 50% slower than the wired connection

  I have verizon Fios internet 25mbps and I get up to 30 on my desktop which is connected directly to the modem, but my laptop on my netgear rangemax Wireless-N 150 router gets 10-13mbps, not far from the router, how can I get the laptop, go faster.

  Hi JTBisaha,

  Wi - Fi connection, the speed reduction could be due to several reasons. Few of them are listed below:

  1. There could be interference in the network you use.

  2. There may be a lot of users are using the same network at this moment

  3. the point of network access can be blocked by something at that time.

  Follow the steps below:

  Method 1: You can follow the steps described in the article below and check if it helps.

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Method 2: You can temporarily turn off firewall or one Anti Virus and check if it helps.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Note: Please reactivate the antivirus software once the diagnosis is made.

  I hope this helps!

• Slow wireless connection of N on the S10-3 0647

  I just bought an S10 3 0647 and while it seems to work fine, I found is very slow N wireless connectivity - it shows the connection speed to be as slow as 19Mbps at times, but more often around 26Mbps. I don't know why when I have other laptops with Wireless N connectivity at up to 144Mbps no matter where I am located in my house from the wireless router (Netgear DGND3700 which has the latest firmware update).

  I need to update a driver, or modify any other parameter?

  Any help would be appreciated.

  http://Forum.Lenovo.com/T5/IdeaPad-Y-and-U-series-laptops/Y560-wireless-n-mode-not-connecting/Ta-p/3...

• Could not get the internet/wireless connection after you installed new hard drive?

  I have a HP Pavilion Entertainment PC (dv6736nr), Windows Vista laptop.  The hard drive crashed and I got a new installed.   I set up my wireless connection, even that is on the other 4 computers in this building (my desktop computer running win7 netbook win7 running 2 computers of the landlord, winVista running - they have comcast modem,? a good router) when I set up the wireless connection, it connects only 'local', no internet.  I researched this some, tried all the places with a parameter that can be a problem, but nothing helped.  What the hell did I miss?  The connection is good because it works on my desk, on which I write, as I said. To my knowledge, the hard disk the the wireless are not connected; or is it? Any help, the concrete steps that I take on my laptop, the settings themselves, would be greatly appreciated.

  Hello:

  If your laptop computer is the Atheros wireless card, you probably just update the driver.

  The symptoms you listed seem to indicate that is the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99068-1&cc=us&DLC=en&LC=en&OS=4062&product=5185745&sw_lang

  Paul

• Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

  Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

  What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

  What model number is the most convenient airport?

  Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

  In addition, not all drives are recognized.

  The internal drive of the TC must be recognized, but there could be problems as well according to the age.

• 2 x Satellite A350-22z but that is slower than the other

  My homefriend and I same computer laptop Toshiba A350-22z but my laptop slower than others.
  I hope that the problem is the highest frequency; mine is %32 other is 100%

  http://img4.imageshack.us/img4/7532/39490208.jpg

  What is the problem in your opinion?

  Hi erdemrek,
  I don't see what exactly is the problem you are talking about but:
  If you have the same processor, the same amount of ram, same brand, model, same installation then everything should be the same.
  What do you mean "more frequently" unfortunately I don't speak your language to that effect, I can't read the text on your image.
  If you test the speed of the machine to be sure to use the same utility (benchmark).
  load on a system differs depending on the services and applications launched and running.
  could you give some more information about this problem?

  as a first step, you can try to change the hard drive and see if there is no change. If it's a software problem, it should appear on the other machine as well when changing the hard drive.

• Wireless connection disappeared after pressing the button system Orange Cisco router WRT54G

  Trying to connect to a printer Dell wirless to the router and has failed, after many tests to get the computer to recognize the printer as a wireless device.  Recommended by Dell to refresh the router and I pressed the button in the above subject line.

  Now, none of my computers display the connection wireless as available. I have reset the time many cable modem and the router and him that restarted the computer and they still will not recognize the wireless connection.

  Also, I tried to use the default IP 192.168.1.1 to review my settings for the router (running a laptop directly via the cable modem), but the address keeps timing.

  What is someone out there knows what can happen to connect wireless to disappear?  Any help is greatly appreciated.  Don

  Your wireless network is gone because you press the WPS button on the front.  Never do this because you don't have the hardware to support it.  Change the SSID and password.

  Press and hold the reset on the back for 30 seconds and then release.  Wait 10 seconds and cycle power to the router.  To connect to a computer wired to the router at 192.168.1.1 only empty password, username "admin".   Now configure the router manually.

• HP Officejet 6500 Wireless: Connecting older printer to the computer and the new router

  I've updated my router and got a new computer and cannot find a way to connect them to my old printer. I followed all the steps I learned other questions and instructions, but nothing helped.

  After having replaced the router reconnect the printer to the new wireless network?

  1. Press the Setup () button on the printer control panel.

• How to hide my wireless connection personal House of the user of the computer on the outside

  I see from time to time by my window a vehicle that is parked outside using their computer. Someone told me that they can connect to the internet using my wireless signal. How can I hide the outside user I have a wireless connection?

  Hello Maria,.

  There are a few things you can do to make sure that you are safe.

  #1. Make sure that your wireless modem is protected using a personal code to access WEP or WPA2. This is done by going to the configuration of your modem and the establishment under the wireless tab / link / article. Of the modem user manual must be able to guide them in this process.

  #2. The other way is to disable the broadcasting network option in the modem. The only problem with this option, it is only people who are currently using the network can get on again.

  I recommend establishing a password on your wireless network and in this way people can see your broadcast network, but they will not be able to get on it, unless they have the password.

  Hope this helps,

  JB

• wireless connection of losses on the reactivation of vista home Premium 64-bit

  My windows Vista Home Premium 64-Bit loss wireless connection on the awakening. I then have to make a stop down and re boot the lap top. Any suggestions/corrections?

  Hi Funnyman4u,

  Check to see if the problem exists in a clean boot state,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• No wireless connection after you restart the computer.

  Original title: wireless connection problems

  Hello my name is justin knox my girlfriends computer mobile computer ASUS laptop with windows 7 each time you turn off the laptop and turn it on my wireless connections are not available for me unless I have help it how can I get this laptop to connect instantly without troubleshooting it powers on every time?

  Hi Justin,

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. Since when are you facing the issue?

  2. you have any security program installed on the computer?

  3 are you aware of any changes made to the computer before the show?

  If you have any anti-virus program I suggest you disable and check if it helps.

  Note: Don't forget to activate once you have finished troubleshooting.

  You can also go through the steps and check out them.

  Method 1:

  Make sure that if the autoconfiguration WLAN service is set to automatic.

  1. click the Start button, type services.msc and press ENTER.
  2. scroll down to the autoconfiguration WLAN service, right-click on it and select Properties
  3. click on the tab general, select automatic for startup type.
  4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.

  Method 2:

  
  

  1. open manage wireless networks by clicking the Start button, then Control Panel. In the search box, type Wireless and then click on manage wireless networks.
  2. click on add and then click on manually create a network profile.
  3. Enter the network information.
  4. If you want Windows to automatically connect when the network is in range, select the start this connection automatically check box.
  5 Select the connect even if the network is not broadcasting check box, click Next, and then click Close.

  For more information visit

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  You can also turn off UAC (User Account Control) and check if the problem persists. After return from the status, so that we can help you better.

  Note: Don't forget to activate the control once you are finished troubleshooting.

  Hope that information was useful and let us know if you need help in the future about Windows. We will be happy to help you.

• slower than the 6s iPhone iPhone 7

  Based on the review and my iPhone experience 7 runs more slowly than the iPhone 6s by restarting, opening of the games of the app. So should I prefer iPhone 7 on iPhone 6s or not because of the downgrade in iPhone performance 7.

  Buy what fits your needs and your budget best.

• Adding faces process is slower than the previous version

  It's feedback to Apple.

  The previous version of Photos where you can select a large number of photos at once, was much faster than the current version that shows you only a maximum of 8 photos at once.

  Other questions:

  If you take lots of photos (of your children, for example), you could not go to Faces often enough to stay with her. As a result, I just spent two sessions of 30 minutes + to select 1000 photos of my daughter's face. Previously this would have taken 10 minutes on the smallest thumbnails.

  Once you click on ' Add and continue "could you realized you made a mistake, but you can't go back. You must enter the mass of photos later and try to find the error. I think it is much easier to do things when you evaluate a volume at a time.

  When you click on ' Add and continue "ago a long processing time to get to the next batch of 8. You start to lose focus when there is such a gap. It makes the whole process very tiresome and repetitive.

  Probably other things.

  It would be great if this process could be reassessed at some point.

  My Mac specs: 8 GB, 3.5 GHz Intel Core i5, AMD Radeon R9 M290X 2048 MB, end of 2014

  It is strictly a user help forum and Apple isn't here - you can give them your comments here - http://www.apple.com/feedback/photos.html

  LN

• WebLogic datasource County connection active more than the max connection pool

  Hi guys,.
  
  We will observe strange behavior on one of our WebLogic instances. A data source is set up with an initial and maximum of 50 capacity, and yet the source of data analysis, we see a number of active connections more of 50 years. In fact, it continues to rise up to 800, after which the database stops to deny connections (obviously).
  
  Why the maximum capacity of the connection pool is not respected?
  
  We lack WebLogic 10.3.5 and the connection pool is connected to an Oracle database using the driver oracle.jdbc.OracleDriver.
  
  Thank you!

  Yes, wire-PIN is documented to override your init-max because it takes
  a connection by running WebLogic threads. If your application also generates its own thread
  who get to pool connections, you have 800 (ugly) son, with a connection.
  This would indicate use suboptimal pool too, which is better to use in getting a connection, using
  and close the ASP, all in a single method call, if the connections are not kept for long periods
  by any thread.