Activation of my MS operating systems.
My Lenovo, computer office came with W7, I walking to W8.1, ran into problems, then returned to W7. I can't find the product code. I can't reinstall my W8.1, product code:
I thank "s". Ewald The product key should be located on the COA sticker attached to the bottom of your laptop or in the battery compartment. You can perform a custom installation using your product key and Windows 10 support: How to download official Windows 10 ISO files then How to: perform a customized Windows installation review How to install and activate Windows 10 using your Windows 7 or Windows 8 product key Tags: Windows The Windows Vista operating system on dv9000 was arrested. The Windows Vista operating system on my laptop dv9000 stopped by Microsoft citing an expired licence. It is preinstalled by HP OS. How can I get my BONES restored without having to buy a new one? lbwhorms wrote: The Windows Vista operating system on my laptop dv9000 stopped by Microsoft citing an expired licence. It is preinstalled by HP OS. How can I get my BONES restored without having to buy a new one? You may need to contact HP in your region or Microsoft by phone. If he please go through these papers & try the above first steps: Activation of Windows Vista operating system Concerning Visruth Serial port under guest operating system does not work Running VMWare Workstation 7.1.3 on win 7-64 bit. Guest operating system is win 7 32 AND Windows XP (32 bit). I followed the instructions on connecting to the host serial port. However, there is no access to serial port a guest OS. Serial Port sniffer running on the host shows NO ACTIVITY on the port operating system serial host. Even serial device, attached and if running on the host works very well. Any ideas? Steve I doubt that the documentation is correct for what is with VMplayer 3 on Windows TGV serial ports is. I removed the option of thinprint and reconfigured the serial port in the vmx file attached. Turn off the virtual machine and replace the existing by the attached vmx file. If it still does not - change I had problems with my PC which is an old, 2003 E - business machines, I changed the hard drive and was invited to provide an activation code in order to achieve the functioning of the operating system, it is the third time that I had to do it in 2 years, a message came back to me that I could use this activation key which is Microsoft XP Home Edition... any suggestions I'm a student who can't afford to keep buying these keys to get my PC running, I have homework to fill out online... Please help Use telephone activation, say nothing, and you will possibly connected to a human being. They should be able to sort out you. My account is active, but Adobe PDF Export ask me to sign up again. The system worked only once on my PC, using the Vista operating system. You must connect prove you are currently subscribed. "Missing operating system" is displayed when you try to start Windows 10 I have been using bootcamp to access the 10 Windows for quite awhile. It was working perfectly until a member of the family installed a Windows Update, but the battery is dead during the update. Following this window would charge any. A black screen with a blinking cursor. After that, I went back on fairing and wrong used the partition synchronization tool. Now, Windows is in a worse state and the "Missing operating system" message when you try to get back in. In addition, the Mac startup disk no longer allows me to reboot the laptop using the bootcamp partition, as if the partition is not more detected. Disk utility simply shows a greyed out "Disk0s4." I spent a lot of time looking for a solution, but without success. Here are some of the things I've tried so far: I don't know if its of any importance but sudo fdisk e/dev/disk0 the following message is displayed: #: cyl hd s - cyl hd s id [Start - size] ------------------------------------------------------------------------ 1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID > 2: AF 1023 254 63 - 1023 254 63 [409640-174722176] HFS +. 3: AB 1023 254 63 - 1023 254 63 Boot Darwin [175131816-1269536] * 4: 0 b 1023 254 63-1023 254 63 [244256768-244140032] Win95 FAT-32 The partition Inspector displays this: Report for internal hard drive *. Current GPT partition table: # Start end LBA LBA Type 1 40 409639 system EFI (FAT) 2 409640 175131815 mac OS X HFS +. 3 175131816 176401351 Mac OS X startup 4 244256768 488396799 database Current MBR partition table: # A Type starting ending LBA LBA 1 1 409639 ee EFI protection 2 409640 175131815 af Mac OS X HFS +. 3 175131816 176401351 ab Mac OS X startup 4 * 244256768 488396799 0 b FAT32 (CHS) MBR content: Bootcode: unknown, but bootable LBA 40 partition: Startup code: no (Non-system disk message) File system: FAT32 Filed under GPT partition 1, type system EFI (FAT) LBA 409640 partition: Startup code: no File system: HFS extended (HFS +) Filed under GPT partition 2, type Mac OS X HFS +. Classified in the MBR partition 2, type af Mac OS X HFS +. LBA 175131816 partition: Startup code: no File system: HFS extended (HFS +) Filed under GPT partition 3, type Mac OS X startup Classified in the MBR partition 3, type ab Mac OS X startup LBA 244256768 partition: Startup code: no File system: unknown Filed under GPT partition 4, type database Classified in the MBR partition 4, type 0 b FAT32 (CHS), active I also tried to use Windows, but without success startup repair. If there is no solution to this problem, all least, hope to be able to back up everything that was on the Windows partition. Thank you very much What is the year/model of your Mac? Please after the release of sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C This will show the first block of the Disk0s4. A new operating system was recently released and SDM appears not all SoftPaqs support this new OS mode 'all products '. Why? If you use SDM in "Update" mode, you can view FAQS (20) (/t5/HP-SoftPaq-Download-Manager/FAQ-20-quot-This-specific-model-could-not-be-matched-All-models/td-p/5317159) and then continue reading below. Pavilion 15-n077so: computer crashed. No operating system. I think that one of my children who happened to step on my computer. So now it's black and want me to install an operating system. I used to have windows 10. He also tells me that: check SMART: not installed, the Long DST: not installed. My question is: 1 cant I save my computor and reinstall windows 10 somehow. 2. the screen is black, how to get to the key of resettlement? 3. I have no dvd with Windows 10. 4. are there opportunities to wake my computer? Sorry, but we don't have access to your PC, so we have no way of knowing how much damage was inflicted and (therefore) have no way to answer your question is to how to be saved. We need to know if your PC comes with preinstalled Win10 or if you upgraded a previous OS and if so, the version of the previous operating system. What we can do here is provide some troubleshooting steps you can take. First thing I would do, is try to follow these guidelines to confirm the hard drive is OK: test a hard drive in the BIOS. HP® customer support If the hard drive has failed, you will need to replace and order HP recovery media to restore your PC to working conditions, and until you have done, there is little value to test anything else. If the hard drive has not failed, here are a few troubleshooting steps you should try: HP Notebook PC - hardware failures (10, 8 Windows) screening | HP® customer support Black screens with no start-up or start-up error message. HP® customer support Regarding the Win10 install media, you can make a DVD or a USB key from this link: install Windows 10 using the tool of creation of media - Windows help NOTE: Be sure to select the SAME version of Win10 that was running on your PC. When downloading on the original PC, the tool knows which version is right, but since you're using another PC, there is no way of knowing that. IF you download a different version, it will NOT be activated. If you are not able to run ANY diagnostic because you cannot wake the portable computer, then your only recourse will be to send or bring in a HP repair center to fix it - and it the laptop is not under warranty, which can be very expensive! Here is information on Service Centers: HP Notebook PC - use a repair center certified HP to repair a laptop | HP® customer support Good luck Desktop PS-14301: operating system My sister-in-law has had this desktop computer for 2 years. Since she bought, he was sent to your technical support once because of some problems with some hard disks. After this first repair we need to take it to another technician (already out of warranty) to get the virus get rid. Now we have the computer working again, but the problem is whenever we go ask as to activate the operating system by typing the product key. Now that we have tried to check all the stickers that are connected to this computer, but we could not find anything on the product key. Now, my question is, if we are provided with the product key when we had this device purchased can still get us it? Or is it possible that when we had bought it they haven't given us a real operating system? pls help I need to know that we should do next, or we will bring back this new to a computer technician. Greetings, The certificate of authenticity must be affixed to the tower. You should see a 25-digit product key. I suspect that the tech installed Win 7 own. If you use the HP COA product key to activate Windows 7 using the phone method. HP provides a product valid key is a testament to the COA sticker attached to your tour. Technology has not activated the PC after a cleaning installed. Take this issue to the latest technology that you to fix your PC. Hemdani 15 af000ur: 15 - af000ur what operating system? Good day! on this laptop model has been replaced a hard drive on the SSD. I installed the 8.1 OEMWindowsoperating system. but it does not come to this laptop (the activation key was not) let it please . ISO (or something like that) with the operating system file suitable (Rus) which can be activated automatically when they are installed. product: N0K1OEA #ACB. Best regards, Anton of Russia)) Hello! new hard drive completely empty (empty) I need to reinstall windows. but the problem is that I don't know what was originally windows (8 or 8.1) in-store (the store sells anywhere update windows 8 or 10, does not know if podaydet the activation key). I have a standard hard drive (factory) in which two partitions: System C drive and partition Recovery. Recovery partition, I have never used because windows recovery did not recognize. so, while I am interested in a clean install of windows with the USB (.) ISO). best regards, Anton)) Possible to downgrade the operating system? Hello experts, My Macbook is a 13 "early 2009 (Core 2 Duo 2.0). I have 6 GB of RAM (recently installed the last 2 GB). Currently, the operating system is OS X 10.11.3. I think that since this OS has been installed (a few months ago) the machine has slowed down considerably. "Outputs page" is almost always up. I re - often starts to get "page outs" to reset, but they will soon get back to the top. Almost any process bothers me a lot of activity "beachball". My main use for this computer uses iPhoto to show slide shows to various groups (I have not found that the Photos should be for various reasons). I know that this is considered a 'old' machine, but since it is my secondary computer I would not spend the money on a complete replacement. Is it possible to go back to an earlier version of Mac OS X? That could accelerate or put less strain on, this Macbook? If I could go back to 10.10 or 10.9 How would I do it? Thank you JimH Your computer will be not a faster were no you downgrade OS X. There's nothing wrong with El Capitan. Page Outs increase because you don't have enough RAM and try to run too many processes simultaneously. If you want to demote to an increase in performance, and then wipe the drive and install Snow Leopard. Ways to help make a slow Mac faster 17 reasons why your Mac runs slower than expected Slow performance of Mac? This Article addresses! Difficulty of slow start in OS X | MacFixIt - CNET Reviews How to fix the slow down time and start. | MacTip.net 6 easy tips to speed up OS X Yosemite on your Mac. Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups. Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also: Before Mavericks Open the activity monitor in the Utilities folder. Select all processes in the drop process . Click the % CPU column heading twice to display in descending order. If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar. Click the force quit button to kill the process. See if that helps. Don't forget to mention the name of the runaway process, so you can find the cause of the problem. Mavericks and later versions
Open the activity monitor in the Utilities folder. Select all processes in the menu display . Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order. If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar. Click the force quit button to kill the process. See if that helps. Don't forget to mention the name of the runaway process, so you can find the cause of the problem. The ultimate solution Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media. Dear Sirs: I have laptop Hp pavilion 1240se g6 and I lost my OS after format. so, how can I get my original copy of Windows 7 home basic oa mea I still have a product key Thank you...
Hello Here are a few options.
1. you can order a set of replacement of the recovery media using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office). They will also recreate all of the original scores, including the recovery Partition. 2 you can use the following method to create your own Windows 7 Edition installation family support basic 64-bit. Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games). An example of a COA label can be seen here. You can create Windows 7 installation yourself using another PC. However, it not there no download directly available for Windows 7 Home Basic Edition, so you'll need to download another version (one will do, but the link below is for Windows 7 Home Premium 32 bit - the source is Digital River). Windows 7 Home Premium 64 bit SP1. For the key on your label of COA to work, you must now use the method described in the following link to convert this ISO to an all-version Installer - the section that require you to edit the ISO is Step 1 DVD universal (although you will create an installer from usb, the method to change the ISO is the same). http://www.SevenForums.com/tutorials/85813-Windows-7-universal-installation-disc-create.html Once done, use an application like Rufus to create a bootable Windows 7 usb flash drive. Use the Flash drive to perform the installation, enter the activation key of Windows on the label of the COA in the request and one time Setup is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations. http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx You could possibly need for your laptop can be found, additional drivers and software here. Best regards DP - K Windows operating system asks the serial key I recently restoed my computer toshiba laptop to factory, used only reinstall hard drive. I restored it using a more recent version recovery disk which has upgraded to vista. Can anyone help as I have important documents on the laptop. Hello You need to reinstall the operating system using good recovery disc because this recovery disk is already activated and does not need keys series. If you don t have the recovery disc, then you will need ORIGINAL of Microsoft Windows disk with valid serial key. The missing Toshiba driver can be downloaded from the page of European driver for Toshiba Sorry, but without valid serial key, you will not be able to activate the OS! Lack of Macintosh operating system partition Try to install the Windows 7 partition using .iso. Errors "Startup Repair cannot repair this computer automatically" / could not find the drivers. In the repair of the system, I set the active partition to the 200 MB 'partition 2 Alt computer and the Windows partition is no longer present. Started to macintosh and he says "lack of operating system. Panic because I can't start either partition now. Help! The 200 MB partition is your Mac EFI. Please install OS X on an external drive - How to install OS X on an external drive connected to your Mac - Apple Support . What year/model is your Mac? Satellite P100-324 - GPU overheating due to fan does not work in the operating system Hello world. While trying to solve the problem of RAM of 4 GB ([this thread | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=28374&tstart=0]), I meet another weird thing - gpu overheating due to fan does not work in the operating system. Now, I restored the XP MCE using the Toshiba Recovery and I was VERY surprised to see that the problem still exists! As soon as loading the system GPU fan stops, and there is only tranquility. The application load is heavy on GPU and reaching 104 results by reducing its GPU and MEMORY clock values and NOT in the activation of the fan. The same thing happens in 64-bit gentoo. ACPI can be turned on or off, it is not serious, the GPU fan always dies as soon as the system load. In non-OS environments (bios, program of recovery, etc.) the fan works fine, GPU cooling from time to time. This problem occurs in versions of BIOS: 2.40, 4.00, 4.20. Any help would be greatly appreciated, since this laptop is my main working tool and I can't let go 14 days (service). I saw in your other thread that you have updated the BIOS and you have installed several different OS. Fact is that the BIOS v 4.2 package contains BIOS 32-bit and 64-bit OS. Best regards How to add a hyperlink while composing emails in iOS 9.2? How can I add a hyperlink while composing electronic on an iOS 9.2 device? HP 7612: Bottom of page missing when adaptation Hello. I have a Hp 7612. When I want to copy a4 format, printer does not display the bottom of the page. but analyze the job very well. The vegetable water are fine. I check with the printer manual I wonder if I'm hunting a product that does not yet exist. I just want to know if there is something the market that would allow me to use the optical drive of my X 41 of basis, via USB, with my X 201 of the. I had bad experiences with consumer USB JSR-82 Bluetooth API taken care of? Hello! I'm developing a program of a large quantity of devices so I decided to use the JSR-82... On all phones works fine, but in Blackberry Pearl 8110 (I don't him have not test it on another Blackberry) how WEIRD... When I start to search for devic Access to Internet of blackBerry Smartphones without a Verizon data plan Does anyone know if using the Blackberry curve in a Wi - Fi hotspot, you can access the internet without a Verizon data plan?Similar Questions
Read my notes http://faq.sanbarrow.com/index.php?solution_id=1007
Then try again
Serial0.yieldOnMsrRead = "FALSE".
TO
Serial0.yieldOnMsrRead = 'true '.
There are three reasons why this might be the case:
A rule of thumb to consider is that the more recent model is, more it is likely that SoftPaqs favourable to a new operating system will be released on the said model. In the past, a "cut-off" line seems to be about 3 years old. However, HP reserves the right to change at any time.
A rule of thumb to consider is that the most recent model, the earlier SoftPaqs will be released which are supported on a new operating system. For example: a model that is only a year old, will probably updated before a model that is two years old.
Note: in the above two cases, a way to check is to visit http://www.hp.com/support and go to the download page for your model. If the new operating system is listed and SoftPaqs support, then SDM will support it as well.
========================================================================
I'm a volunteer and I do not work for, or represent, HP.
---------------------------------------------------------------
If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
If my posts resolved your issue please click "accept as a Solution.
========================================================================
The toshiba that I restored is old and has been under XP.
Now after a few weeks it will not open the windows.
He said: "the operating system is not the original system" or something like that and you request an access code or password.
Your laptop has been preloaded with Win XP MCE 32 bit. Please use the 32-bit BIOS if the original XP MCE running on the laptop.Maybe you are looking for