Activation of Windows ERROR

Similar Questions

• Activation of Windows error, error Code 0x80070426

  either after a failed update or update of bit Defender, the computer will not beyond start "Windows activation error. A problem occurred when Windows tried to activate. Error code: 0x80070426. »
  Research on this problem, I found a possible solution that did not work. I booted in safe mode with prompt... typed command services.msc... went to which software licenses was arrested... (it is set to auto). I tried to restart it and received the error message "Windows didn't start licensing of software on the local computer." Error 1084: this service cannot be started in Mode safe. »
  I'm trying to get this course without having to reload Windows Vista. Any suggestions

  Hi atf3doc,

  Please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/26784c0b-0faf-4978-a7a4-044c707b70d7

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Activation Pro Windows error 8

  

  This is what happens when I try to activate windows 8 pro.
  If it's important; I used to have Windows Vista installed.
  Help, please!

  Error 0x8007232b or 0x8007007B occurs when you try to activate Windows

  http://support.Microsoft.com/kb/929826

• I have this error 0 x 80070005 (access) denied when I activated my Windows server 2008 R2 64-bit

  I have this error 0 x 80070005 (access) denied when I activated my Windows server 2008 R2 64-bit. Here's the print for the activation screen. Your help is most appreciated. Thank you

  Hello Mika Wong,

  The question you have posted is related to Windows Server 2008 and would be better suited on the TechNet support forum. I suggest post you the question on the TechNet support forum for more information.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• Activation of Windows Update Error: Installation faild-Error 0x80072EE2 update information

  When I try to open "Windows Activation Uapdate" this error will appear after you download the update package:

  (Update installation failed. Information about the Error - 0x80072EE2)

  I want to know why this happens?

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  Carey Frisch

• Activation of Windows 7 0xC004C020 error

  I have a genuine Windows 7 product key that I used several times on the same computer, whenever I have to reinstall Windows 7. In every installation, activation could be done successfully. But this time after reinstalling windows, I tried to activate Windows 7 but activation failed!

  Code:
  0xC004C020

  Description:
  The activation server reported that the multiple activation key has exceeded its limit.

  Help me to understand and solve this problem?

  Hello

  Adding suggestions from Ron and Andre Da Costa.

  See How to solve the codes error Activation Volume Windows 7, Windows Server 2008 and on Windows Vista computers

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error code: 0xC004E003 while activation of windows 7.

  While the activation of windows 7. .i get error 0xc004E003 code. . I use my product key for 2 years, but now it asks me to change my product key. . When I tried to activate it with my key it shoes this code error...

  a Samsung OEM SLP key will not work on a Dell computer.

  you will need to buy a genuine windows or return to windows, your computer comes with that.
  your office is not genuine.

• Get the 'Message (unacceptable)' error while activating my Windows 7 product key.

  * Original title: product key

  When I want to active my windows 7 it ask me to enter the product key, but I can not enter the number (0) and I have this

  Message (unacceptable character)
  

  I've updated since an activated copy of Windows 7 or Windows 8/8.1, then I decided to reinstall using either the. ISO file, reset the player's PC or recovery, but I am prompted to enter a product key:

  Click on that later

  Windows 10 automatically reactivates in the coming days.

  Things you should know:

  • A Windows 7 or Windows 8/8.1 product key cannot Activate Windows 10. Windows 10 uses its own unique product key.
    
  • By default, the versions of Windows 10 are previously entered, which means, you don't have to enter a product key and should not be invited to enter one as long as you upgraded a activated License of Windows 7 or Windows 8 or 8.1 of Windows or Windows 10 Preview build.
     
  • If you perform a clean installation on the first attempt, you will have to start from an activated installation of Windows 7 or Windows 8/8.1.
    
  • If you are prompted to enter a product key, click on Do this later and give it a few days, 10 Windows will be activated automatically.
    
  • Activation servers may be overwhelmed at the time due to the volume of updates, so give it some time if you get an error of the type ()0XC004E003, 0x8007000D, 0x8007232b or 0x8007007B) 10 Windows will activate eventually as long as you upgrade by using the appropriate method.
    
  • It does not need to know your product key Windows 10, read "Understanding Product Activation in Windows 10:

  Figure 10 Windows Product Activation:

  In previous versions of Windows, when you have installed a version upgrade of Windows, if you want to reinstall the upgrade version, you had first reinstall permissible version where you upgraded, reactivate, then upgrade again and reactivate again.

  With Windows 10, this is no longer the case. Once you have upgraded to Windows 10 and enable, you can simply create a bootable copy on DVD or USB and reinstall all Windows 10 without having to reinstall the release candidate and it automatically reactivates.

  Quote:

  "10 keys Windows handles differently. When you migrate to Windows 10 via Windows Update to 8.1 Windows or Windows 7, the process saves your eligible hardware and OS computer with a Microsoft Product Activation Server. The device is considered as a device Windows 10.

  "Thereafter every time you re-install (or clean install) installation check in with these servers, concludes the unique installation ID and product validation.

  ZigZag3143 (MS - MVP)

  To learn more:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-activate-and-resolve-common-product-key/33f31475-93B3-4D1C-812F-4b21fbd807a7

• Activation of Windows 7 0xC004F050 error

  I corrected by running Windows update and got the above error. For a little history, I am running this windows on an IMAC in a Bootcamp partition. I was trying to run Parallels for Mac OS and that's when the problems started. I look at my computer properties and note that the State of Activation of Windows is not available and the product ID is not available. I tried Windows Activation and it lets me know error code is 0xD000034. I don't have a lot of items installed in Windows 7, but if resettlement would not be a huge problem, but if there are solutions out there that would save me some time.

  Thank you

  * original title - error Code D000034 when trying to update Windows *.

  Generic Hi A public identity,

  Please see the thread with a similar problem and fix possible:

  http://social.Microsoft.com/forums/en/genuinevista/thread/1ea680c4-728a-4Cab-bc39-b8a9ba4c25c7

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error in product activation key Windows 8 0xC0000022 / 0xC004F012 & more...

  Hello everyone.

  I've been running Windows 8 for almost a year now.  Authentic, active, copy no problem whatsoever.  So after some personal problems with security, last week, I did a factory re install my Windows 8 X 64 system with high hopes.

  All I get is the Windows Activation arise regularly, but when I try to activate Windows, error 0XC0000022 code appears. (PARAGRAPH 1).
  Tried to activate by phone, but I do not have Installation ID slui 4 being listening off too.

  Ran 'SLUI 3', product code entered, only to get "could not verify that key, then try another. (SS 2)

  Even tried as mentioned, SLUI 4, enter "Denmark" and new 0XC0000022 (SS-3), then a window with no installation ID

  

  

  

  So, after a lot of research and searching the Internet for a solution possible, I got to try some solutions without success.

  I tried to launch a recommended cmd

  sfc/scannow

  

  and this is what I have... online or not

  So I tried the next best thing I knew 'The MGADiag tool' only to be again disappointed by this screen

  

  and that's where he suddenly became chaotic, cause now, I got a new error then look up.

  Apparently, this problem occurs when some files in the update of Windows are missing, even if the update is downloaded and extracted successfully.

  "" So I quickly discovered a fix recommending'Troubleshooting Windows Update tool "fix Microsoft ' and tried, with a real outcome, for the first time since a started with that, a week ago. It looks like this

  

  Here I am through, Yes! Finally and I keept going on with the recommended steps, which mentioned a 'Refresh your PC without your files' so I did, only to be disappointed again 2 hours later... by (SS1) error 0xC0000022

  Without all the other tracks, so I started poking around in my control panel, just to be surprised by that too... What, my Windows is active, but not active? huh

  

  When it clearly States in 'view details of activation' ' NOT AVAILABLE ' a click later

  

  and yet once, click later on this page, I was tempted to look at the details "activation" that lead me to this screenshot for you guys

  

  Error code:

  0xC004F012

  The software Licensing Service reported that the call failed because the value of the entry key was not found.

  Now, this is where I get really confused, because now we have 3 error codes listed... and am honestly lose trust in all these solutions, but cela a seams to be the problem... It turns out that this error pops up when something is wrong with your 'Software Protection service' in Services.msc. So I checked out and Yes really enough...

  Software protection service does not work! explains that I come back with all the other services are in effect, including the activation of Windows associated with those. So start it leaves are we going?

  

  Access is denied? Hmm what a surprise. Pretty much identical to the previous error 0xC0000022. Which means normally is wrong with my permissions as access should not be denied... So I went to the next logical place... Properties to verify permissions and Yes, really everything is grey like this

  

  AHA I got through and I found myself quickly sppsvc.exe file in my Windows dic. and changed all the permissions for FULL CONTROL. Only to return to the exact same small screens.

  Now, here, I'm a week later, with a lot of knowledge, but no real results... really confused and embarrassed... So, I really hope that someone out there is smart enough to offer an adequate solution for this.

  PLEASE DON ' T BOTHER IF YOUR JUST SOME MOD WITH A USELESS FANCY COPY PASTE TO THE SHOW... I NEED HELP, NOT A FANCY FILLERS.

  OK, I don't usually answer and try to help, but as I spent so much time researching this issue after experiencing the same issue here, it will:

  This solution worked for me on Windows 7, it has not been tested on Windows 8, but it worked for me after I have tried all the same steps that the poster original, nothing helps.

  The problem is the Software Protection service, and is unable to start as you found it from the beginning.

  Step 1. Open an administrative command prompt.

  Step 2. Copy and paste the following command into your command prompt, and press to enter. This properly resets the permissions on the service:

  ICACLS % windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform/Grant, "BUILTIN\Administrators: (OI) (CI) (F)" "NT AUTHORITY\SYSTEM: (OI) (CI) (F)" ' NT Service\sppsvc: (OI) (CI)(R,W,D) "," NETWORK SERVICE: (OI) (CI) (F)»»»

  Step 3. Open Windows Explorer and navigate to %windir%\System32

  Step 4. Make sure you can see hidden and system files and folders.

  Step 5. Delete all the files/folders with the following name (you can move them to a folder to archive instead of delete them if you want to be sure):

  7B296FB0-376B-497e-B012-9C450E1B7327-5P-0.C7483456-A289-439d-8115-601632D005A0

  Step 6. In your Windows Explorer window, navigate to:

  %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform\

  Step 7. Tokens.dat and rename it tokens.bak

  Step 8. Try to start the Software Protection service. It should start successfully today. If he does then restart the computer and try to activate Windows again.

  Thanks to Craig Garland and Santosh Bennett for their positions on the Technet site on the Software Protection service which lead me to this response.

• code error of activation of Windows 8. How to activate it?

  my windows 8 Professional is not activate. I have the original product key, when I entered the product key for activation it shows (error code: 0xC004C003).

  How to activate it? I can't change the colors of early, desings etc... pls tell me how to activate it?

  someone tell me a simple way to enable easily.

  We have no idea if it is installed on another machine, or hacked/stolen.

  Contact Microsoft.

  "How to activate Windows 8 and 8.1 telephone"

  http://www.eightforums.com/tutorials/24636-activate-Windows-8-phone.html

  Follow these steps and do a phone Activation and brace yourself for a real person to help you.

  SECOND OPTION

  To activate Windows by phone 8.1

  1 do step 2, 3, 4, 5 or 6 below for what you want or able to do.

  2. press on the Windows + R to open the Rusluisn dialog box, type slui.exe 4, press enter and skip to step 7 below.

  3 open an command prompt, type slui.exe 4, press enter and skip to step 7 below.

  4. open the menu tasks power users, click/click on Systemand go to step 5 below.

  5. open the Control Panel (Display icon)and click/click on the System icon.

  
  (A) click/click on Activate Windows in lower-right corner to Activate Windowstitle and continue with step 7 below. (see screenshot below)

  

  6 open PC config, click/click on Activate Windows on the left side.

  Etc.

  «Get help with activation errors»

  http://Windows.Microsoft.com/en-us/Windows-8/activation-errors

  'How to activate a Microsoft product using Microsoft Product Activation Center'

  http://support.Microsoft.com/kb/950929/en-us

• error on activation of windows 8 (enterprises)

  Getting error code {0 * 8007007b}... during activation of windows 8 (companies)... so that you can all help in this topic?

  Hello

  We can not help you with problems of Activation with Windows Enterprise.

  Business is not for the home/private users.

  I suggest you contact your system administrator.

  See you soon.

• Error of activation of Windows 8, want to activate every now and then.

  Why my windows asking for activation after update.the pc same cant active again where is false, I have tyrto active eroor code.who is the solution now windows recommended to upgarade readers Windows 10 wiil try if the same still need activation, which can do.or my activation key expires and must be buy windows againevery recommended upgrade?

  Thank you

  Hello Rhendetz,

  Thanks for posting your question on the Microsoft community.

  We are in need of more information about the issue so that we can help you further.

  How activating Windows error do you get?

  Thank you for details on the issue.

  I suggest you run 'Microsoft Genuine Advantage diagnostic tool' and check.
  Reference:
  Request a genuine Windows support
  http://Windows.Microsoft.com/en-us/Windows/help/genuine/submit-request

  Please try to perform the activation of the phone and check if it helps.
  Refer to this article:
  Get help from Microsoft Windows activation
  https://support.Microsoft.com/en-us/KB/950929

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Activation of Windows 8 0xC004F074 error

  I have a Lenovo laptop, Z580 that came with windows pre-installed 8. It had worked fine since I bought, but suddenly started to ask for activation of windows and when I try to activate it display this error code: 0xC004F074. Could not find a direct solution for this problem. Help, please

  Retrieve your product key:
  https://NeoSmart.net/blog/2014/Windows-10-embedded-product-key-tool/#more-3188
  Designed for Windows 7 users, embedded Windows 8 and Windows 10, our product key tool will retrieve and display the Windows product key integrated in the BIOS or EFI setup, allowing you to store for security reasons or use it to reinstall Windows with a Windows installation to the official address image.

  Press Windows key + R
  Type: slui.exe 3
  Press enter

  Enter the product key and click next to activate via the Internet.

• Activating Windows error «0xC000002 access denied»

  Original title: activate Windows.

  So some time ago I was having problems so I wiped my computer, now I want to activate windows. I received my product key, but every time I go it it gives me a few different error messages:
  0xC000002
  Access denied
  A process has requested access to an object, but has not been given these access rights
  0xC002001B
  The remote call procedure failed

  I made CPP runs by setting the Auto value and pushing to start and he explains how it works, but I don't know what else to do. I'm not good with computers, so I'm out of my League and I'm tired of Windows 8. If someone could please help.

  Oh and when I push the button of windows turn on and activate the windows screen it says check this key pour.0001 a second then closes and before I touvh nothing above the key it said activation not found error description.

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  
  

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.