Error in product activation key Windows 8 0xC0000022 / 0xC004F012 & more...

Hello everyone.

I've been running Windows 8 for almost a year now.  Authentic, active, copy no problem whatsoever.  So after some personal problems with security, last week, I did a factory re install my Windows 8 X 64 system with high hopes.

All I get is the Windows Activation arise regularly, but when I try to activate Windows, error 0XC0000022 code appears. (PARAGRAPH 1).
Tried to activate by phone, but I do not have Installation ID slui 4 being listening off too.

Ran 'SLUI 3', product code entered, only to get "could not verify that key, then try another. (SS 2)

Even tried as mentioned, SLUI 4, enter "Denmark" and new 0XC0000022 (SS-3), then a window with no installation ID

So, after a lot of research and searching the Internet for a solution possible, I got to try some solutions without success.

I tried to launch a recommended cmd

sfc/scannow

and this is what I have... online or not

So I tried the next best thing I knew 'The MGADiag tool' only to be again disappointed by this screen

and that's where he suddenly became chaotic, cause now, I got a new error then look up.

Apparently, this problem occurs when some files in the update of Windows are missing, even if the update is downloaded and extracted successfully.

"" So I quickly discovered a fix recommending'Troubleshooting Windows Update tool "fix Microsoft ' and tried, with a real outcome, for the first time since a started with that, a week ago. It looks like this

Here I am through, Yes! Finally and I keept going on with the recommended steps, which mentioned a 'Refresh your PC without your files' so I did, only to be disappointed again 2 hours later... by (SS1) error 0xC0000022

Without all the other tracks, so I started poking around in my control panel, just to be surprised by that too... What, my Windows is active, but not active? huh

When it clearly States in 'view details of activation' ' NOT AVAILABLE ' a click later

and yet once, click later on this page, I was tempted to look at the details "activation" that lead me to this screenshot for you guys

Error code:

0xC004F012

The software Licensing Service reported that the call failed because the value of the entry key was not found.

Now, this is where I get really confused, because now we have 3 error codes listed... and am honestly lose trust in all these solutions, but cela a seams to be the problem... It turns out that this error pops up when something is wrong with your 'Software Protection service' in Services.msc. So I checked out and Yes really enough...

Software protection service does not work! explains that I come back with all the other services are in effect, including the activation of Windows associated with those. So start it leaves are we going?

Access is denied? Hmm what a surprise. Pretty much identical to the previous error 0xC0000022. Which means normally is wrong with my permissions as access should not be denied... So I went to the next logical place... Properties to verify permissions and Yes, really everything is grey like this

AHA I got through and I found myself quickly sppsvc.exe file in my Windows dic. and changed all the permissions for FULL CONTROL. Only to return to the exact same small screens.

Now, here, I'm a week later, with a lot of knowledge, but no real results... really confused and embarrassed... So, I really hope that someone out there is smart enough to offer an adequate solution for this.

PLEASE DON ' T BOTHER IF YOUR JUST SOME MOD WITH A USELESS FANCY COPY PASTE TO THE SHOW... I NEED HELP, NOT A FANCY FILLERS.

OK, I don't usually answer and try to help, but as I spent so much time researching this issue after experiencing the same issue here, it will:

This solution worked for me on Windows 7, it has not been tested on Windows 8, but it worked for me after I have tried all the same steps that the poster original, nothing helps.

The problem is the Software Protection service, and is unable to start as you found it from the beginning.

Step 1. Open an administrative command prompt.

Step 2. Copy and paste the following command into your command prompt, and press to enter. This properly resets the permissions on the service:

ICACLS % windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform/Grant, "BUILTIN\Administrators: (OI) (CI) (F)" "NT AUTHORITY\SYSTEM: (OI) (CI) (F)" ' NT Service\sppsvc: (OI) (CI)(R,W,D) "," NETWORK SERVICE: (OI) (CI) (F)»»»

Step 3. Open Windows Explorer and navigate to %windir%\System32

Step 4. Make sure you can see hidden and system files and folders.

Step 5. Delete all the files/folders with the following name (you can move them to a folder to archive instead of delete them if you want to be sure):

7B296FB0-376B-497e-B012-9C450E1B7327-5P-0.C7483456-A289-439d-8115-601632D005A0

Step 6. In your Windows Explorer window, navigate to:

%windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform\

Step 7. Tokens.dat and rename it tokens.bak

Step 8. Try to start the Software Protection service. It should start successfully today. If he does then restart the computer and try to activate Windows again.

Thanks to Craig Garland and Santosh Bennett for their positions on the Technet site on the Software Protection service which lead me to this response.

Tags: Windows

Similar Questions

  • After opening a PDF file in Acrobat 9 Pro, I get error "Suite Product Activation necessary...". ', this after last update of Windows 10

    After opening a PDF file in Acrobat 9 Pro, I get error "Suite Product Activation necessary...". ', this after last update of Windows 10 - what is a solution?

    Hi patsyf58769691,

    Acrobat 9 is not compatible with Windows 10, but give it a try error "Serial number." incorrect Acrobat 9 | CS4.

    Kind regards
    Nicos

  • Where can I find my product activation key?

    Original title: product activation key

    Where can I find my product activation key? Every now and then a screen appears saying: activate windows now and it blackens my background for my PC. Can you tell me where to find the activation key? I have a computer for K12 and it dosent have the label key purchase on it.

    If you can't find the product key, use the following:

    How to find your product key

    Reference 10 Windows, but also works on Windows 7.

  • Activation of Windows 8 0xC0000022 error

    Hey guys, I would really appreciate some help here.
    Many thanks in advance to anyone who can solve this problem...

    I took my laptop Acer in a shop repair to fix a broken power button and since then Windows 8 has been asking me to activate. I don't know how it happened as the repair guy was not supposed to make software changes and as far as I know he didn't.
    Now, I am unable to apply the updates to windows on my laptop.
    Windows periodically appears the parameters of Windows 8 PC asking me to activate. When I click on the button "activate" in the settings of PC nothing happens but a message saying "Error not found Activation".
    I tried my best just shot myself, but I've gotten nowhere.

    I tried to activate using the command slui 3, and initially the dialogue says that my product key works and click on continue, but when I got into in the next window you receive ERROR 0xC0000022
    When I try to activate by phone using slui 4, I get the same error and also the activation dialog shows only the numbers 1-9 instead of 'series' of numbers for me to get on the phone.

    I have many other threads in this forum and other forums, traveled trying to try one of the solutions that have worked for other people, but nothing has worked.

    From what I have learned, this problem is caused by a problem with the software protection service.
    When I check the status of the Software Protection service, it does NOT work and when I try to start it manually I get "error 5: access is denied."

    I tried the SFC/SCANNOW command. and he reports new for me that all is well.
    I changed around some permissions on drive C, make sure that my user name is listed as the owner and I still get the same error.
    I have reset Windows 8 by default using the method to clean it thoroughly and I STILL get the same error.

    I'm losing my mind here! I know there are some wizards real tech here and I really hope for more help. Thank you again for your time...

    Try to contact support to see if they can help you with this, because you have pretty well exhausted the best available solutions:

    Help with the activation process, contact technical support

  • Windows XP SP3 product activation key

    Original title: on the product windows xp3 key

    I have desktop dell for my roommate there wxp3 when I was downloading things he wanted on this subject, I do not remember seeing anything whether I don't register in 30 days windows stop well you stop I can't even in safe mode for recovery of the etc system.  When I go online after the entrance of seizure of the password of a message that I produced windows enable you want Yes or not I click Yes then place comes another spot by saying that the windows product activation is on x on ok to leave then nothing happens it keeps coming I chatted online on my pc with micro tech He said, I had to buy the Windows XP operating system to get the product key - what if I could do to get this work once I've done a system restore in SafeMode to April 23 nothing happens or I have to buy this wxpos on the money I can't spare ty for any help from maryanne

    [Moved from comments]

    MaryAnne,

    Have you contacted Dell for the product key?

    The product key sticker is usually stuck to the tower that provides to the customer of the OEM (Original equipment manufacturer).

    If nothing works, you may need to contact Microsoft Customer support to provide you with a new product key

  • Can I reinstall the upgrade to Windows 7 Professional on a new hard drive without any problem of product/activation key?

    Recently, my hard drive crashed and could be damaged, because I can not install anything on this subject.

    I still have the CD of Windows XP Professional that has been used to upgrade to Windows 7.
    So, if I buy a new hard drive and install XP first and then upgrade to windows 7. I'll be able to
    to do this without side windows activation problems.
    Or do I have to buy a new drive for windows?
    PS: Is it important that it is the version of Windows 7 professional student discount?
    Thank you.

    If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

    How to do a clean install with upgrade disc:

    Boot from the Windows 7 DVD

    Click Install now

    Accept the license agreement

    When the option is displayed to select a type of installation, click (Custom advanced)

    Click on drive Options

    Select the disc/s click on Delete

    Click new

    Click on apply

    Click OK

    Click Format, and then click next to proceed with the installation

    Skip entering your product key Windows 7 and complete the installation.

    When you reach the desktop, click Start, right-click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click the link x days before activation.

    Click on the link that says: "show me other ways to activate.

    Enter the product key

    Click next

    Select the Activation of the phone

    Click Next when you enter your key page

    Select your country

    Click Next, call the number listed

    Be sure to explain your situation to the Appeals Officer.

    Provide the installation generated when ID requested by the call agent

    They give a confirmation ID in return, enter it

    Click next to complete the activation.

    However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

    15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

    So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

    or

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Error running 7 activation key Machine virtual parallels

    I am running Windows 7 in parallels on my MacBook Pro mid-2009 7. Whenever I upgrade my Parallels software, I get an error message indicating that I need to activate my copy of Windows. When I do that, I get a message saying that my activation key has expired. I know that the key is valid. I just bought Windows 7 last September. Any advice?

    Partial product key: HW4KC
    License status: Notification
    Reason for the notification: 0xC004F009 (grace period expired).
    Remaining Windows rearm count: 3
    Trust time: 28/07/2012 20:56:44

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Product activation message Windows and I can not get a c prompt

    After that a recent installation reboot update, the following message appeared "Windows Product Activation - a problem has prevented Windows to check accurately the status of the license for this computer.  To keep your copy of Windows must be activated with Microsoft.  You want to activate windows now? Yes No ".

    Whether I click Yes it could restart the computer in verification mode of the disc and when the screen finally appeared was so the new message

    I tried to restart under different modes and seems the same screen.

    Finally got a safe mode screen and the followin message appears "Windows has no start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file" Note: I don't know how to get to a prompt c from here

    I rebooted the computer with the professional disc of Microsoft Windows XP that came with the computer and may have to reboot from the CD, but here, I tried 2 options F2 which asks for a Microsoft disk recovery Application that when he uses the Microsoft disk I get a blue error screen "STOP: 0xF78D2524, Oxc0000034, Ox00000000, Ox00000000 ' and told me to run CHKDSK /F

    If I just allow it to run the CD it goes back to the root of the windows error.

    Please tell me how to get rid of this virus

    You posted a forum for users of the software program anti-malware for Microsoft Security Essentials (MSE).

    Your problem does not appear to be linked to malware or MSE.

    See the following thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system/windows-rootsystem32haldll-please-re-install-a/3edb97c5-a4d2-459a-a5fd-c5dd6d9b5418

    If you need further assistance would suggest you try the Windows XP Forum:

    http://answers.Microsoft.com/en-us

    I hope this helps...

  • product activation key

    I bought windows anytime upgrade of a friend of a friend. She told me that she has been upgraded to windows 7 on his laptop. I installed windows home edition premium, but when I put in the product key the message says it's in use. I have no way of contacting the seller, as she moved in the West. How can I get a product key?

    See: How to contact a Microsoft Product Activation Center Carey Frisch

  • product activation limit Windows 7

    I acquired a copy of Windows 7 from Dreamspark which includes 2 activation of windows 7 64-bit (and 32-bit, but I'm only using 64-bit). I have two computers that I use, but computers died a long time ago.  I replaced from this computer, but when I used the same product key I now get notifications that the product key has expired and cannot be enabled on the new computer.  Technically, I have 3 installs this key, but I did not use the first years since the computer installation is long dead.  Can I turn off this product not to be linked with my key so I can activate my current product key and I have my 2 computers both running windows 7 64 bit?

    The best you can do is to reactivate by phone:

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Email activation key Windows 7 has been deleted.

    I reformatted my computer, using the DVD Windows 7 Home Premium.  I was the e-mail long ago, but deleted the email activation key.  How can I get my activation key?

    Find your key product if your purchase of Microsoft Store:
    http://store.Microsoft.com/Help/FAQ?Err=T2#AT2

    For Digital River: go to www.findmyorder.com and pick up your order or you connect to your account information for this site. You'll need your order number and the password of the account used to purchase online or your e-mail user name and last 5 digits of the credit card used to make the purchase.

  • Activation key Windows Vista already in use after reformatting?

    Recently I had to reformat my PC twice, by the choice and the other due to a virus about a week later. Now, I try to activate my Windows Vista 32 - Bit Home Edition key. When I go to the screen and tap on activate Windows now it gives me an error that says "this product key is already in use." Ive never had that happen, how to fix this? I only have 26 days left.

    Us the ability to use the phone to avtivate.

    Click on the Start button and type "slui.exe 4" in the search field and press the Enter"" key. This will bring up the activation of the phone dialog window. Follow the prompts on the screen.

    Tom Ferguson

  • error 0x8007041D during activation of windows 8

    I get this error message when I try to activate windows. My product key is already entered.
    It worked fine until a week ago. So now whenever I turn on my pc it says please activate, I click Activate, and it displays error 0x8007041D.
    Any help would be appreciated!

    Hello Santosh,

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    You made any hardware or software changes on your computer before the show?

    Thank you for details on the issue.

    This problem may occur if the Windows activation files are corrupt or if the anti-virus software installed

    on your computer, blocks the activation process.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Activate Windows using the activation of the phone and check.
    Refer to this article:
    Get help from Microsoft Windows activation
    http://Support2.Microsoft.com/kb/950929

    If this does not help, use method 2.

    Method 2:
    Disable the anti-virus software, and then try to activate Windows.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Error 0xC004E003 during activation of Windows vista

    Original title: 0xC004E003

    error 0xc004E003 code shows when I put the product key in a sticker on my dell Inspiron 1545

    Hi hrskavat,

    This error occurs if the license validity interval has expired, or if the license is not signed correctly.

    See the Microsoft article and try the steps mentioned below.

    Error message when you try to activate a copy of Windows Vista: "the Software Licensing Service reported that license evaluation failed: 0xC004E003".

    http://support.Microsoft.com/kb/950755/

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Invalid activation key Windows 7 Home Premium after re-installation

    I have a laptop HP Pavilion G6 with recovery of 7 Home premium windows installed on the hard drive. (I don't have any drive recovery). I had to use Ubuntu for awhile, so I lost my recovery. However, I have always the product key, so I installed windows from a copy, which I downloaded from the Microsoft Web site, and when I insert the key to activate windows, it is said "Home Premium de Windows 7 key you typed is invalid for activation. What should I do? I tried the thing of activation of phone but they keep hung up (the answering machine, computer or whatever it is).

    Please help me, what should I do?

    Skip entering product key and complete the installation.

    then try to reactivate by phone:

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

    See the following topics:

    http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

Maybe you are looking for

  • How do we uninstall RR of savings?

    pop-up advertising by RR savings are infiltrated in most sites I discoveredI've already removed all questionable programs... or so I thinkI use stopzilla and perform analyses oftenI also have a problem with java... impossible to read some crosswordI

  • Ping local IP devices

    Is it possible to Ping connected local IP addresses on different VLANS / subnets connected to the LAN, for example (192.168.0.5) ports, since the Web Interface of FVS336Gv2 when you're connected remotely? This would be very useful to try to solve the

  • 2013 mac os 64 GB Boot times per

    I installed my Mac Pro 2013 to 64 GB memory.  When I turn now, it takes more than a minute for the apple logo to appear.  Once the apple logo appears, the rest of the startup procedure is very fast, and the system works perfectly.  I have a Quad Core

  • SoftMotion and FPGA OR 9514

    Hey Gang, I spent the day to set up a new system of cRIO and a new installation of LV2012 RT and FPGA Softmotion. Our system uses a CAN interface, which, we learn, requires the use of FPGA mode.  Maybe this isn't a bad thing, because we are concerned

  • Error when changing the language of the front panel in Japanese

    Hello world... I'm changing the front panel of the English language to Japanese. To do this, first I exported the strings through the Tools->Advanced-> export channels.  After that I changed one of the label in Japanese and saved with Unicode encodin