Activation without the internet

Similar Questions

• error of activation without the internet.  Always!

  Well, one day left to activate CS6.  I tried chat support, sent experts to telephone support, been disconnected telephone support, is been using expert forum, referred to the cat help, they take control of my computer uninstalled cs5.5 and cs6, new host file, ran cscleaner, I bypassed the router, I completely uninstalled bitdefender firewall, I took everything off the computer remotely related to adobe rebooted, uninstalled, copied, pasted, moved to the desktop until I'm blue in the face. At took the laptop to work, cs5.5 loaded, installed and activated and cs6 without any problem...  But who wants to use adobe on a small screen all the time.  I reinstalled both cs5.5 and cs6 and virus protection as well as all the other adobe products, because an error of activation even cs6 with or without them.  I want a refund and really enjoy using cs5.5 on my big screen, so the final question mightbe; Has anyone had and actually solved the problem of activation of cs6, "settings of the clock of bad weather or no internet connection?  If Yes, what, where the questions of the origin of the problem?  Also, what is the file that tries to activate the cs6 and where it is found, maybe I can get someone to come in the House and solve the problem of connection... If someone out there can give a positive contribution, please answer... @Jeff Wright, you sent me the support chat and still I have the same problem, so if anyone has more ideas, thank you.

  Thank you very very much Mr. Wright and Mr. Daniel van der Wal... This offline activation was successful.  Now I can sleep.

  Yet once I thank very you much.

• Windows XP activation without the internet

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Messages of ideas: windows xpError

  Windows xp enabled, now I have no internet connection he no longer recognizes

  Hello

  Maybe this can help. http://www.ezlan.NET.Debug.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Adobe Web premium CS3 activation without an internet connection?

  Hello

  I while back I bought a copy of Macromedia MX2004 and bought an upgrade to Adobe Web premium CS3.  I have used in the past both produced and registered and activated them without any problem.  After do not use the software for some time, I decided to install the software upgrade Adobe web premium cs3 on a new machine.  The PC has no internet connection, so I struggelling to register and activate the product.  I tried ringing the activation number but told me that he cannot stand these products and activation of such.  I have the two serial numbers for MX2004 and indeed the CS3 product upgrade however can not use them until I get an authorization code.  I can't do this the PC I installed the product on without an internet connection? !

  Can anyone help?

  Thanks in advance.

  Everything is good. Thanks to all for the replies. I had some misinformation among customer service agents. It was a little difficult, but it is running.

• How to install Adobe Reader without the internet!

  How am I able to install the Reader Adobe (PDF) on a PC without Internet.

  Download the Setup program and moving the file on the other pc has failed unfortunately.

  Is there a zip file of the complete installation? If yes I definitely missed!

  I hope an answer soon because I have an important to catch deadline!

  Thank you for your time!

  Use Setup http://get.adobe.com/reader/enterprise/ offline

  [subject moved to forum Adobe Reader]

• could not start the report without the internet server

  I am facing a problem report from DS 10 g server.
  
  The report server is started successfully, if I connect the Lan card cable to run internet.
  
  If I disconnect it, report server does not start.
  
  Where is the problem?
  
  I use following command to launch:
  
  Start/b/d 'F:\DevSuiteHome_1\bin"rwserver server = REP_RIYAN

  Hello

  3.7.6 install a loopback adapter

  A loopback adapter is required if:

  * You are installing on a computer DHCP (see Section 3.7.1 'Installation on computers DHCP').
  * You are installing on a computer not connected to the network and that you plan to connect the computer to a network after installation (see the Section 'Installation on Non-Networked computers' 3.7.4,).

  http://download-East.Oracle.com/docs/CD/B19375_06/doc/FRS/install/B16392_03/reqs.htm#CHDBGJID

  Concerning

• This means that I got to know that if I lost my phone and if anyone finds my phone, he can use the phone without turning on the internet?

  That means that I need to know if someone stole my phone and he can use the phone until he turns on the internet?

  without the internet, it can have access to call, sms, photo capture very good etc.

  No one can use your iPhone If you have locked access code.

• CS6 activation says that I am not on the internet

  Install a new drive CS6, a window pops up stating that I am not connected to the internet. Packaging code has been entered, and it seemed to be acceted. The computer was actually connected to the internet at the time with browser running. I was and am actively on the internet on a regular basis through this computer. CS6 installing otherwise was OK, as it worked for 7 days, but I can't run Photoshop since. Research using Adobe led me nowhere so far except for this interactive community, where I hope to find some tips. Thank you.

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• BlackBerry Smartphones Can I have a blackberry and not pay for all the internet services?

  Hi I'm new on this and my t-mobile phone that I broke and I looking to upgrade to something that will help me to stay a bit more organized, but are unwilling to pay for the service package that comes with the purchase of a blackberry from t-mobile. I know that I could get one on craigslist or ebay or something and I was wondering if I could just put in my Sim Card and it would have all the functions without the internet and emails. All I really want to the phone is easy navigation, good organizer, easily send SMS and calls. Thanks for the help! -Sully

  Sully, Hello and welcome to the Forums of Support BlackBerry.com.

  Sorry, no. Without the BlackBerry data Plan, you will get very little data from the device functions... voice and SMS, Yes. Calendar, contacts, etc., Yes. No RIM push email.

  You can use the Opera Mini browser for the internet with the setttings TCP active for a browser for free... just watch your billing and ensure that you are not charged.

  http://www.BlackBerryFAQ.com/index.php/What_are_the_TCP_and_APN_settings%3F

• Extreme implementation without an internet connection

  Hello

  I was hoping to use a previous generation Airport Extreme in a small temporary office that has no internet connection, so from my iPad, I can use a USB printer and external hard drive connected to the extreme. How to set up the extreme so it will work without the internet and give me access to the USB port?

  Thank you

  Got, it works. Utility Airport in Internet selected item connect using static and gave a valid address. Network I put the DHCP router mode only.

• Why can I not use itunes connected with the internet?

  I use itunes on my windows 7, my PC is connected to the internet, but I can't use itunes. Yet, I can use itunes without the internet, how did this happen? Then I can't use it to access the itunes store.

  Hi nakama2016,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are experiencing these problems with iTunes on your Windows machine. If you are able to launch and use iTunes, but are not able to sign in to or access the iTunes Store, or other functions of the internet, you will find the troubleshooting steps in the following article useful:

  If you cannot connect to the iTunes Store - Apple Support

  Concerning

• Pop up window saying reactivate windows on the internet in 3 days, 2 days now, is this a virus?

  When I start Windows XP, a pop-up window appears saying that, due to the additions of recent hardware, I need to reactivate Windows. After I closed this window THAT XP starts and then another window appears telling me I need to here my copy of windows on the internet. It gives me three choices, 1, activation over the internet now. 2 I want to contact a representative by phone to activate it. 3 more later remember to activate it.

  It started with a delay of 3 days it's now 2 days. He also taells me that if I didn't reactivate Windows XP ater 2 days, I won't be able to use it.

  E pop-up window has the Microsoft logo and a link to the "declaration of priacy Windows Product Activation"

  I guess it's a virus that has slipped into a scam. Someone help please.

  Jeff Ashberry

  Hello

  · What is the number and the model of the computer?

  · You have made the change and the hardware in the computer?

  It doesn't seem to be a virus on the computer. I suggest you to visit the links below to learn more on the subject, you are facing:

  Technical details about Microsoft Product Activation for Windows XP: http://technet.microsoft.com/en-us/library/bb457054.aspx

  You are prompted to activate Windows XP or Windows Server 2003, each time that you start the computer: http://support.microsoft.com/kb/312295

  How to activate Windows XP: http://support.microsoft.com/kb/307890

• Brand new series of Premium computer HP HDX 18 t cannot stay connected to the internet

  The home network works well.  There are two othe Mac laptops and a desktop dell who have no problem with the internet connection.  The network is on the HP laptop as excellent connection.  But when I go to the internet I usually only about 5 minutes before it stops working.  No browser can bring up any Web site.  I can't reconnect without forcing the entire domestic network turned off, then on again.  Then I will have about 5 minutes more on my HP laptop before mess up again and loses the internet.

  This HP bought to replace my old slow computer.  But without the internet, it is useless.

  Can someone help me please?

  Since automatically allowing the the new update of the driver, then INSTALLING AIM on my computer... everything is good enough for me.  It remains on the internet for longer periods of time and when it does not leave the internet, auto AIM restarts to near seemlessness.  I work for AOL, and I had no idea of PURPOSE did this - but I don't mind a bit.  I'm really very proud. Not that I had something to do with it (I'm a photographer)

  I'm marking my problem as "almost resolved" and I will only come back to this area if I have additional problems.

  Thanks for the help everyone.

• Controller of domain and DNS behind RRAS without VPN connected directly to the internet with a Cisco router

  I hava a ME Cisco 3400 with physical single port available for a cable connection.

  The ISP give me an IP address interface = 89.120.29.89 to act as a gateway to the IP Address of the host, which is provided for in the order 89.120.29.90.

  The host computer is a dual Xeon computer with two NICs for LAN and WAN.

  Fields of application: to install a windows 2008 R2 between public and private network server.

  Even though I know it's not recomanded, I put the DNS role and directories Active Directory roles installed on the same computer, the computer above, (I do not have enough computer for roles different place on different computers)

  The desired configuration:

  To have installed with his roles behind a WS2008R2 has RRAS. without a VPN.

  b with VPN

  and for WAN access for the client computers of the private LAN Windows 7 OS. (The basin of LAN address 192.168.0.1 - 255).

  First step : to have internet access in the browser (I use Google chrome) (without taking into account the DNS and AD)

  Network configuration:

  Map NETWORK WAN, at the top of the stack of liaison in the Control Panel/network connections and sharing:

  Host IP: 89.120.29.90

  Mask: 255.255.255.252

  Gateway: 89.120.29.89

  DNS: 193.231.100.130 my ISP name server address.

  OK, I can browse the internet.

  Second stage. (Consider DNS and Active Directories)

  DNS instaled role for this computer.

  AD installed as a global catalog.

  NETWORK WAN server that is directly connected to the Cisco router:

  Conection area 3

  Properties:

  Client for Microsoft Netwaork: not verified

  Network Load Balancing: not verified

  File and shared printer: not verified

  QoSPacketScheduler: not verified;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4                                                     ;  checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  Host IP: 89.120.29.90

  Mask: 255.255.255.252

  Gateway: 89.120.29.89

  DNS: 193.231.100.130 my ISP name server address.

  under the tab advanced

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: not verified

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: not verified;

  Use this connection DNS suffix in DNS registration: not verified;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: don't check;

  Disable NetBios on TCP IP: checked;

  Connection to the local network 2

  Properties :

  Client for Microsoft Netwaork: checked

  Network Load Balancing: no

  File and shared printer: checked

  QoS Packet Scheduler: not verified;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4 checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  NETWORK LAN CARD: 192.168.0.101

  Mask: 255.255.255.0

  Gateway: 192.168.0.1

  under Advanced tab:

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: checked

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: checked;

  Use this connection DNS suffix in DNS registration: checked;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: check;

  Disable NetBios on TCP IP: not verified;

  Install RRAS as NAT (NAT) under any condition imposed by DHCP(not installed) in ideea that RRAS will generate the private IP address of the DHCP allocator.

  In any case, for the beginning, I have a fix IP, do not get IP automatically.

  At this point, it gets the configuration simple posible for RRAS follows:

  3, LAN connection that corespond to the WAN interface IP:

  "NAT configured for the following Internet interface: Local Area Connection 3.
  The clients on the local network will assign the IP addresses of the following range:

  network address: 192.168.0.0. netmask 255.255.0.0.

  After Windows RRAS are open:

  The Network Interfaces tab:

  NICs are enabled and connected;

  UAL remotely & policies:

  Launch NPS,

  on the NPS server tab:

  Allow access to successful Active Directory directories:

  Properties: authentication: port 1812,1645

  kept port 1813,1646;

  on the accounting tab: nothing;

  under NPS policies:

  Grant permission for the RRAS server under builin\Administrator of the accounts;

  On strategy and the type of server unspecified (NAT do not exist as an entry in the drop-down list server dwn)

  under the static road: nothing;

  under the IPv4 tab or both are there(there IP) and are up

  under NAT

  Connection to the local network 3: public interface connected to the internet

  enable NAT on this interface:

  under the address pool: ISP addresses public;(two addresses)

  under the terms of service and the ports: Web server: http 80.

  (I have I have a static IP address for the client computer in mind, I set up a single customer).

  At the client computer :

  configured as domain customer and added to the users AD and computer AD

  logon to the domain:

  Local Area Connection

  Properties:

  Client for Microsoft Netwaork: checked

  Network Load Balancing: not verified

  File sharing and printer: checked

  QoS Packet Scheduler: checked;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4                                                     ;  checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  Host IP: 192.168.0.101

  Mask: 255.255.0.0

  Gateway: 192.168.0.1

  DNS: (auto-add the same to the local machine).

  under the tab advanced

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: checked

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: checked;

  Use this connection DNS suffix in DNS registration: checked;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: checked;

  Disable NetBios on TCP IP: not verified;

  right now the 192.168.0.101 client cannot connect to internet through RRAS.

  ;

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• I use a wireless modem to get on the internet at Virgin Mobile Broadband2Go device. Is it possible for some to get access to my PC, when this device is active?

  I have these multiple .exe running on my registry? security of wireless modem?

  I have 2 questions:

  1. I use a wireless modem to get on the internet at Virgin Mobile Broadband2Go device. Is it possible for some to get access to my PC, when this device is active?

  2. I think that someone is due to ghosting my PC. On my registry, I have 2 of the following: iexplore.exe attributed to administrator. Then I have an explorer.exe attributed to administrator. I have 6 svchost.exe running 2 assigned the Local, 2 assigned to network service and 2 running service attributed to the system. Can anyone provide an answer why I have these multiples, exe running on my registry?

  Thank you very much

  GreenGiant

  Hello
   
  Yes, it is possible to gain access to your computer; but not without your permission. The firewall on the computer prevents any unauthorized entry. Refer to the following articles.
   
  What is a firewall?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-firewall
   
  Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Firewall
   
  How will I know if a wireless network is secure?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure
   
  When you say "Record" do you mean "Services" in the Windows Task Manager. Its common to have these processes or services to run in the background.

  'iexplore.exe' means 'Internet Explorer'.

  'explorer.exe' means 'Windows Explorer'.

   

  What is svchost.exe?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-Svchost-exe

   

  You can scan your computer with MSE to check the virus or malware if it affects your performance.

   

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Hope this information is useful.