activeX DIADEM

Similar Questions

• Error during asynchronous script runing DIAdem of labview on dual core processor

  Need urgent help / advice here!

  A kernel works well... double heart generates error: error in (line: column 17,: 1): error opening object. The currently open object has no subobjects. Forgotten ObjClose?

  The main software built in labview for data acquisition and analysis generates a PDF report at the end of a test, using DIAdem. For this I use the tiara express vi in labview to generate a report of multi page, in which case I use for loop to go through an array of strings for each page. This loop has a registry change too. After each page I run a script to set a few parameters such as linear/log, start/end and line thickness using the DIAdem Connectivity Toolkit. See the script below:

  Call GraphObjOpen("2D-Axis1")
  Call GraphObjOpen ("2DXAxis8_1")
  D2AxisXDivMode = 'linear '.
  D2AxisXScaleType = "start/end of manual.
  D2AxisXBegin = 20
  D2AxisXEnd = 20000
  Call GraphObjClose ("2DXAxis8_1")

  Call GraphObjOpen ("2DYAxis8_1")
  D2AxisYDivMode = 'linear '.
  D2AxisYScaleType = "full automatic".
  D2AxisYBegin = 0
  D2AxisYEnd = 0
  Call GraphObjClose ("2DYAxis8_1")

  C = 1 to CurveNoMax
  If D2CurveObj (c) = "" then exit for ' c
  Call GraphObjOpen (D2CurveObj (c))
  D2CurveLineWidth = 0.75
  Call GraphObjClose (D2CurveObj (c))
  NEXT ' c

  Call GraphObjClose("2D-Axis1")

  There is also a screenshot of the vi: (script file is generated by the Dscript vi and saved on a disk. then the path is passed to the tiara script vi.)

  

  I think it is, after the first page of the report is complete to the second page tiara ALWAYS shows error as shown above. However, on my P4 laptop with single core (without hyperthreading) its works very WELL EVERY TIME with a given number of channels/pages of the report.

  My chain of thought is the ultra-fast dual core is something in parallel, so no waiting for page previous complete or complete his purpose of closing! However, in my loop for, I use a shift as before named register, certainly this kind of loop can be divided on multiple threads of carrots/parallel? because it must wait for the answer from the previous. ! ? ! ? Im running LV 8.6 on WinXP for this project and I don't even think treatment multicore for loops for is included in this version.

  The other thing is... This script allows to launch at the end on the dual core until I added the last part that uses a loop for to get all the lines of the chart to be the thinkness I need. What this loop for the guilty? Can I stop to run on multiple cores/threads? I read a post by saying that there is tiara 8 support multi core. This triggered my doubt

  As always, your comments are most appreciated

  AL

  Hi Al,.

  I have a theory, but only you can test.  In your screenshot of the VI, you have the Boolean value of entry for the tiara run with asynchronous Script.vi = TRUE.  My theory is that if you modify this boolean (and all others like him) asynchrous = FALSE, the error will not occur on the multicore computer.  The other thing you could try would be to consolidate all orders report that relate to a REPORT page in a single call to tiara ActiveX.  In the screenshot below, you have at least 2 distinct call of screw DIAdem, so it's at least 2 separate ActiveX calls for a REPORT sheet.

  Here's what I think is happening.  On a multi-core computer, there is the potential for different orders of LV ActiveX tiara to run on different hearts, which can lead to a problem of synchronization on the side of the tiara.  DIAdem 11.x and earlier works exclusively on 1 CPU, so incoming ActiveX controls should be properly sequenced by the tiara ActiveX task list.  Theoretically, tiara must serialize all incoming ActiveX controls (no matter which CPU processed them) in the order that they arrived at the Server ActiveX DIAdem.  The side sending, the execution of LabVIEW data flow should theoretically ensure that all ActiveX applications are sent in the correct order.  But it is theoretically possible that queue processing ActiveX of the operating system cannot send all the ActiveX controls to DIAdem in order that he receive them LabVIEW - IF YOU have SELECTED PROCESSING ASYNCHRONOUS.

  See if these clues help you,

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• Application c# does not start if the tiara is not installed on the computer

  Hello

  I did a c# application, including forms of measurement studio.

  A feature of the application is that I can start DIAdem and then open a tdms file - that works.

  But if I install the application on a computer without a DIAdem application installation c# unbootable.

  Is there possibility to tell c# don't not to load the diadem.dll or is there a nickname TIARA that tells that the tiara of the DLL is not accessible?

  Best regards Joerg Koch

  Hi Joerg,

  I am pleased that you hear that you are making progress.  ActiveX DIAdem servers will be, by default, to connect to an existing instance of tiara and leave it unmolested when they finish.  If instead, no instance of tiara exists when the ActiveX Server is called, then demand ActiveX begins a dependent instance tiara child who stops automatically when the calling program terminates.  What most people do, is create the connection ActiveX at the beginning of the application variable and hang it on him until the end of the application, even if no tiara activity happening for long periods.  If the connection object variable persists, it will be the DIAdem instance, even an instance of tiara child dependants.  Do you think it would be an option for you?

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• Configure the search box on My DataFinder with vbscript

  Hello

  I use the following vbscript script to load data into data tiara Portal:

  Define dataFinder = Navigator.ConnectDataFinder ("My DataFinder")
  Set queryForm = Navigator.CreateQuery (eAdvancedQuery)
  queryForm.ReturnType = eSearchFile
  Call queryForm.Conditions.Add (eSearchFile, 'name', '=', '*.tdm')
  dataFinder.Search (queryForm)
  Set dataFinderResults = dataFinder.Results
  Call Navigator.LoadData (dataFinderResults).

  This works great until My DataFinder of research area was previously set through the control panel of Navigator DIAdem.

  We leave the tiara of a Visual c# application and the above vbscript part a vbscript script that is spent in DIAdem when it is launched through the argument of /CScriptStart.  I would like to define dynamically the DataFinder My search box a path argument also happened in DIAdem.

  Is it possible to configure the search box on the My DataFinder with vbscript?

  In addition,

  Is it possible to have the tiara run in the background without going through the DIAdem screen flash when it starts first?

  Thanks a lot for any help

  Renette

  Renette salvation,

  From DIAdem 11.1, newly released last July, we now have an interface of VBScript to define the areas of research and other aspects of the DataFinder.  DIAdem 11.1 also has the ability to save a configuration file DataFinder and load, both interactively and programmatially.  Earlier versions of DIAdem had no affect by program areas of research.

  Note that defining the areas by programming research will result immediately in all files being indexed and ready to be questioned - which can take some time after you set the new areas of research, according to the number of files in each search box, you add.

  You start currently tiara with a BACK extension to run a VBScript script right after the launch.  The advantage of this approach is that Sophie persists as an independent application, even after the end of the calling application.

  You may also call one of the two servers ActiveX of the tiara, which would invisibly begin DIAdem and allow you to stay in touch with this instance of tiara and read the DIAdem variables and run more DIAdem orders or VBScript scripts.  The disadvantage of this approach is that if your calling program ends, so does the connection ActiveX, and stops the instance launched by this connection ActiveX DIAdem.

  Ask if you have any other questions,

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• How can I access the ActiveX settings?

  When you try to use a program downloaded on my desktop, you receive the following error message. How can I fix it?
  Sorry, your browser ActiveX settings prevent detection Laser App

  Is what program this? When I search Laser App it resembles a cloud application that works in multiple browsers (http://www.laserapp.com/), but maybe the name is not unique, or you use a different program that wants to integrate App Laser or run it in Internet Explorer.

  Built-in browser scenario

  It would be in the settings of Internet Explorer, not Firefox settings. I would check with the software publisher on what needs to be changed in this case. It may involve parameters for the hidden box 'computer' or other unusual stuff.

  Throw in THE script

  Try to make Internet Explorer your default browser to work around the problem. In this case, you can always use Firefox by starting it directly, but the links in other programs will open in Internet Explorer instead.

• I have Windows 7, Adobe Flash Player 16.0.0.305 NPAPI and Adobe Flash Player ActiveX 13.0.0.214. Should I have them both?

  On Facebook, the videos are choppy, Adobe Flash player 16.0.0.305 crashes. Issue of intermittent latency when scrolling on web pages. Use memory and CPU high when the shift occurs. I'll upgrade to Adobe Flashplayer 17. I'm especially curious to know if I need Adobe Flash Player NPAPI 16.0.0.305 both Adobe Flash Player ActiveX 13.0.0.214. They perform the same function? Having both installed would be my problem?

  You must uninstall both of them and install the latest version of Flash, 17. https://get.Adobe.com/flashplayer/download/?installer=FP_17_for_Firefox_-_NPAPI & standalone = 1

  To try a few more things that could improve your performance:

  • Fix Firefox problems caused by malicious software
  • Firefox - modules to reset and refresh settings
  • Update your graphics drivers to use hardware acceleration and WebGL

• I need ActiveX plug-ins for remote working and there is no where I can find it for Firefox well all the questons seem to point to the web site of Firefox.

  When looking for activex solutions point to Moxilla or Asker, but I can't find the download on each site down. Where can I get the activex for Firefox?

  It's a shame that means cannot use the latest versions to explore and firefox now to enter the work. It is a working deployment problem. Thanks for your time.

• Why when I open my camera Foscam, Activex mode, I have no picture, and I click on manage at the bottom, but ger javascript:adminstrator0. Why

  My FI8910W Foscam, opens after the Panel, with three modes to the choice. Only ActiveX in IE mode, working to allow records to do. Sometimes, back, right after that I bought this new laptop, a free AT & T program with McAfee, is available for AT & T users. But this soft, can be loaded in Internet Explorer, and something wrong with IE, it prevented from happening. I contacted AT & T Tech support, allowed the tech on my machine, and even he couldn't solve it. Then, he opens Firefox I already had and installed a program that makes Firefox actually act like IE, so that the McAfee software, can be downloaded and installed. He worked, using Firefox to replace IE, to download and install, but the spooler to print on my pc, went wrong, and would not work to use my printer. Tech Dell takes control of the pc, found to reinstall a full Windows 7 was necessary, and he did. Now, the works of print spooler, but the new facility, has removed the AT & T Tech software added to Firefox.

  That is a pain, but we need, for some sites, as for the Activex mode, with my camera. I tried pening mode ActiveX in Firefox, and it opens, but not picture. When I click on device management, to go into the settings, I can't. What I get is a little pop ball down to the right, that says "javascript:administrator0". Thinking that perhaps the Javascript has been disabled, I checked in the options and it's not so it is checked, enabled. I'm on my pc as an administrator, so now I'm stuck. Y at - there someone who can explain how to make it work, so I can use my camera in ActiveX mode, so I can actually record tings, if necessary, when I leave? Thanks in advance. Oh, my Win 7, a 64-bit OS, not the 32 if it helps.

  More than likely you have had IE Tab installed in Firefox before re-installing Win7.

  https://addons.Mozilla.org/en-us/Firefox/addon/IE-tab-plus/

• I recently installed Adobe Flash Player ActiveX 11 - 11.4.402.265 and when I open my Mozilla Firefox browser I get this message flashing on my screen: '

  I recently installed Adobe Flash Player ActiveX 11 - 11.4.402.265 and when I open my Mozilla Firefox browser I get this message flashing on my screen: "Adobe Flash Player 11.4 r402 has stopped working" and then "Windows is checking for a solution"

  It flashes several times then stops usually but not always.

  It happens every time I try to open a new page.

  I solved this problem by uninstalling Adobe Flash Player 11 and install Adobe Flash Player 10.3. However, now my IE browser again wants me to install Adobe Flash Player 11. Although I do not often use my IE browser, I DON'T have to use sometimes. Is there a Firefox 15.0 update to fix this problem?

  First of all, the Flash of the IE is totally different than the flash used in Firefox. You can update one without affecting the other.

  Now, there is a problem right now with Flash 11.3 and 11.4 in Firefox. Downgraded to 10.3 is an acceptable solution for the moment. Adobe publishes the updates (slowly) that solve the problems, but it is not a matter of time before they are all fixed.

  Adobe Flash plugin has crashed - avoid that it happen

  11.3 Flash does not load video in Firefox

  We'll find other information on more technical issues under these links:

  http://forums.Adobe.com/thread/1018071?TSTART=0

  http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

  Please tell us if it helped!

• Control ActiveX Mozilla & Plug in causes of support 1.0.0.4 my XP machine to get slow way. Is there a problem with it? I had to disable the Add On.

  With this active Add On, the system seems to be cycling in and out of repeated calls to "verify" something, I guess, adding an irritating delay for surfing the internet. I've seen no detrimental effect to the deactivation of this Add On to this day. It happens on some sites worse than others, but most is affected.

  Plug th Mozilla ActiveX Control is causing problems, and Mozilla have taken steps to block. Over the next few days a blocklist update should automatically be downloaded, which will result in this plugin automatically blocked.

• Why not suport activeX FireFox contrals? Internet Explorer does

  I can't seem to use the training and practice of Microsoft office, because it continues to tell me that my browser back do not support active X controls

  https://support.Mozilla.com/en-us/KB/ActiveX

• Portege R600-11b - cannot install Adobe Acrobat 9 - ActiveX problem

  I recently bought a Portege R600-11b and have tried to install Adobe Acrobat 9 on it by downloading it from the Adobe site.
  I spent many fruitless hours talk to Adobe to try to solve this problem.

  They concluded that my laptop is not compatible with the software.
  This isn't the case, that this laptop exceeds the specification of systems required in all aspects.

  The problem seems to be that it won't work ActiveX even after all the firewalls and anti-virus in disabled - I don't know hardly what to do - anyone has any suggestions please?

  > They concluded that my laptop is not compatible with the software.
  That s just absurd

  The Adobe Acrobat Reader software is a small application and can be installed on almost all computers and systems so that s certainly not a reason why you are not able to install this software.

  If this problem is related to the ActiveX, then you can change this in the settings of your internet browser.
  For example, using the IE7 you could modify this here:
  Tools-> Internet Options-> areas-> {}-> ActiveX controls and plug - ins area-> allow unused ActiveX controls to run without prompt

  You can also try to clean the operating system and the registry because the problem might be related to faulty registry entries.
  To do this, I would recommend using the free CCleaner tool.

  Finally and above all it s always advisable to consult the homepage of support from software manufacturers. Here you will find some documents on installation with the Adobe Acrobat Reader software problems.
  http://www.Adobe.com/support/reader/

  Check it out!

• ActiveX has stopped working

  Hi I have a problem, all of a sudden my ActiveX seems to have stopped working, this may seem trivial, but I need it for my work and don know how to make it work again, can anyone help please?

  Thank you

  Hello

  then why didn t you tried to remove all the ActiveX controls and reinstall (perhaps the latest version)?

  Welcome them

• I need to run activex to connect to a server

  I need to run activex to connect to a server. I have a new mac running EL Capitan of air

  If the site requires browser features only Windows as ActiveX, so it is not really a web site at all, and it of nothing that you can speak except to use Windows or let the site operator know that its designers are incompetent.

• Export Excel in DIAdem 15

  Hello

  I use 15 DIAdem and trying to export values in the data portal to a XLS (Excel) file.

  I tried to look for similar tasks a previously in this forum and found a few directions.

  (1) ExcelExport function - appears to be eliminated in the recent version of DIAdem,

  (2) extension IPM: gfsexcel (?). DLL - also absent in my files DIAdem

  (3) export TDM/CSV using instead...

  ((3) seems to be possible, from now, but it would be great if I can use Excel export directly (as 3) needs a few extra clicks..)

  In detail, I want to export values in my data portal (not much data; 1 rank & max. 20 columns) for the excel file, and it would be better if exported excel file opens automatically (I assume that this was possible with the function ExcelExport before).

  If there is no idea, please let me know.

  Thanks in advance,

  Young.

  If you want to try the CSV export, it is possible to configure it to match your local excel import.

  If it responds, it automatically loads to Excel.

  Option Explicit
  
  Call DataFileSave (CsvParameters ("C:\temp\out_ger.csv", "ger"), "CSV")
  
  Call DataFileSave (CsvParameters ("C:\temp\out_eng.csv", "eng"), "CSV")
  function CsvParameters (byval filePath, byVal lang)
  
    Select the lang case
  
      case "ger".
  
        "CsvParameters =""& replace (filePath," & ","&") &",  JJ. "Mr. YYYY HH: mm:"
  
      case "eng".
  
        "CsvParameters =""& replace (filePath," & ","&") &". , " MM/DD/YYYY HH: mm: pp.
  
      other cases
  
        CsvParameters = filePath
  
    select end
  
  EndFunction

  Classically, there are three things that you have to adapt to the local context

  • decimal point
  
  
  • seperator
  
  
  • TimeFormat