activity frozen app

Similar Questions

• Cannot open or remove frozen app

  My app Shazam recently updated and now it is frozen, I can't open it or delete it. I even went to iTunes, but it would not fill the list on the left of the apps where I would normally delete permanently apps. I was going to try to remove it and then re - download from the app store. Any ideas?

  First, try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. Then go to settings > general > storage & use iCloud > manage storage (the first) > locate the application and try to delete from there.

• Frozen app

  The Skype app, I am trying to download said install but is frozen and did not move out of State? It's nothing unresponsive on the ipad shows that its installation. Help!

  It took a long time to download, and at last he came through 5 hours later?

• Frozen app training

  My workout app is frozen. As I was about to start my training on elliptical, that nothing would come up to set my market. Now, it is frozen and only watch elliptical and the arrow in the upper left corner.

  Hello

  It can help to restart your iPhone and your watch. Close the two devices together, and then restart your iPhone first:

  • iPhone: press and hold the sleep/wake button until the Red slider appears. Drag the slider to turn off your iPhone; When it has finished turn the power off, hold the sleep/wake button again button until you see the Apple logo.
  • Watch: Press and hold the side button until you see the cursor off the power; Drag the slider to turn off. To restart, press and hold the side button until you see the Apple logo.

• The 'Activity' iPhone app icon disappeared.  Health app no response...

  Hi, can someone help me?

  My iphone and the watch are paired successfully.  All applications can communicate well via bluetooth, except health and activity.

  'Activity' from my iphone icon disappeared.   Health of the iPhone cannot detect the Apple Watch.

  IPhone 6: iOS 9.2.1 (13D 20)

  Apple Watch: version: 2.1 (S 13, 661)

  Location:

  1 app Iphone Watch > Watch My > Apple Watch: my Apple Watch is paired successfully.

  2 * Iphone and watch can communicate via bluetooth without problem for all applications, EXCEPT for 'Health' and 'activity '.  ***

  3. in the Iphone, the app 'Activity' (icon target yellow red green arrow) disappeard and can not be found.

  4. in the Apple Watch, their properties can turn step, distance and calories without problem.

  Health app:

  1. health > Sources: Apps 'None,' devices 'None '.

  2. my Apple Watch is NOT displayed in the devices page.

  3. no activity can be transmitted from Apple Watch for the health of the Iphone.

  4. NOTES again: other applications (like message, whatsapp) all work well.  Can send the message to Apple Watch.

  Watch app:

  1. my watch: activity can be found.

  2. my watch > health > Edit: after updating the date of birth, sex, height, weight, leaves the application and back, all the data date of birth, sex, height, weight disappear and become "undefined".

  Have contacted Apple phone support and visited enginners Genius Bar.  Not everyone knows how to fix it.

  I tried

  1. no matching and re-twinning

  2. turn off iphone and watch and re - start over

  Still does not work.

  Hello

  Try the following steps (which have solved the problem even for others). Note that this solution involves the permanent loss of any sensitive data on your iPhone and watch, including health data, data HomeKit and saved passwords.

  • Start by making a backup encrypted United Nationsof your iPhone:
    • This must be done only via iTunes on a computer (for iCloud backups are encrypted);
    • Do not select the option to encrypt the backup of the iPhone;
    • How to back up your device using iCloud or iTunes - Apple Support
  • Restore your iPhone as new (IE to factory settings) using iTunes:
    • Follow the instructions here:
      • Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support
    • When you see the option restore or put to update, choose restore;
    • Once the restore is complete, the installation, restore your iPhone from backup unencrypted;
      • If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports
  • Associate your watch, set up as a new watch (do not restore backup):
    • Set up your Apple Watch - Apple Support

• Activity & Heath Apps do not work

  I have an iPhone 6. About 2 weeks ago health and business apps stopped working and follow all the data. I have not matched & paired my Apple Watch & even gone as far as clear my iPhone & relocation of a back-up all to nothing does not. I turned on and off both devices and raised his eyes all possible solutions. Am I missing something?

  Hello

  On your iPhone, go to: settings > privacy > Motion & Fitness - check that fitness and health monitoring are enabled.

  On your iPhone, in the application of the watch, go to: Watch My > privacy > Motion & Fitness - check that heart rate and fitness tracking are both enabled.

• Battery - background activity to App Store

  I know that the last thing that needs Community Support of Apple is another complaint of battery, however, this case appears to be different then all the others that I've seen here and I am completely baffled.

  Just within the last 48 hours, my phone has been draining the battery faster then normal.  I have not modified the special parameters that would have affected this.  I kept an eye on what the parameters of the battery said uses my battery the most.

  Earlier, I noticed that after only be awake for 4 hours today (with virtually any phone use because I'm at work) my battery is at 18% already and the phone feels hot.

  Some information more: my job is not a WiFi for us to use (sh * t I know) so I manipulated strongly what applications use data because I often go to my data plan 4 - 5 times per month (AT & T *)... in any case. I have the cellular data disabled for the purposes of the App Store, but, when I checked my battery today use to see what happened to drain my battery so quickly, that he showed to 4.2 hours of use of the background.

  I tried soft - reset my phone, and am probably going to try restore later today, however seem to help anything.

  I really try to avoid going to the Apple Store to get it checked since the Mall is on the last place on Earth, I want to be right now.

  Any suggestions?

  Also disable auto downloading music, apps, books und app updates in the settings/iTunes & AppStores?

  To make sure that it is not software related, set it back to factory settings, without using any data backup later. Set up the rest of the personal settings manually and test the phone.

  If the battery life goes back to normal, the restore to the last backup. If the problem returns, the data backup contains damaged data, causing your issues.

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

• Automatic SplashScreen activity minimizes app

  I have a SplashScreen running in s Thread activity. Call methodefinish(); minimizes the application when the SplashScreen activity ends and the MainActivity begins. How can I complete the SplashScreen activity without calling the finish?

  public class SplashScreen extends Activity {
  
      /**
       * The thread to process splash screen events
       */
      private Thread mSplashThread;    
  
      /** Called when the activity is first created. */
      @Override
      public void onCreate(Bundle savedInstanceState) {
          super.onCreate(savedInstanceState);
  
          // Splash screen view
          setContentView(R.layout.splash);
  
          final SplashScreen sPlashScreen = this;   
  
          // The thread to wait for splash screen events
          mSplashThread =  new Thread(){
              @Override
              public void run(){
                  try {
                      synchronized(this){
                          // Wait given period of time or exit on touch
                          wait(5000);
                      }
                  }
                  catch(InterruptedException ex){
                  }
  
                  finish();
  
                  // Run next activity
                  Intent intent = new Intent();
                  intent.setClass(sPlashScreen, MainActivity.class);
                  startActivity(intent);
                  //stop();
              }
          };
  
          mSplashThread.start();
      }
  
      /**
       * Processes splash screen touch events
       */
      @Override
      public boolean onTouchEvent(MotionEvent evt)
      {
          if(evt.getAction() == MotionEvent.ACTION_DOWN)
          {
              synchronized(mSplashThread){
                  mSplashThread.notifyAll();
              }
          }
          return true;
      }
  }
  

  This did:

  mSplashThread =newThread(){@Overridepublicvoid run(){try{synchronized(this){// Wait given period of time or exit on touch
                      wait(5000);}}catch(InterruptedException ex){}// Run next activityIntent intent =newIntent();
              intent.setClass(sPlashScreen,MainActivity.class);
              startActivity(intent);//call finish after startActivity
              finish();//stop();                    }};
  
      mSplashThread.start();
  

• Creative Cloud Desktop frozen app!

  Whenever I open the desktop application, just on the inventory item. I can't click anything else. Even if the settings button is the only job.
  I don't understand what is happening.

  

  Hello

  Please force quit Adobe all associates who are doing creative cloud, CoreSync, CCLibrary, CCXProcess, Adobe CEF Helper, Office of Adobe, Adobe IPC broker, Adobe Crash Daemon Activity Monitor in Mac / end of task in the case of Windows Task Manager. Then, start Creative Cloud Desktop Application and reconnect.

  Please write if it helps.

  Kind regards

  Shelly

• Download sierra button not active in app store Mac OS

  I tried to download MacOS Sierra 5 times. The first 3 times the download never went to install. I'm guessing that the download was not complete. All downloads were running almost 2 hours or more. After the 4th download, the computer was shutdown. When I started, I had a circle of download and reel. I actually leave can work from one day to the next and it was never finished. No, when I try to download, the download button is gray. I have connected the MacBook Pro directly to the router with the ether net cable. The button calmed grayed. The MacBook Pro is 2012 8 GB memory and 550 GB of storage. It is currently running OSX 10.11.6. Does anyone have an idea of what's going on?

  Hi barneyfrommount dora!

  I see that you are having problems with the update to Mac OS Sierra.  I know it's important to be able to update, and I'm happy to help you.  Please start the Mac in safe mode, and then try to update while the Mac is in safe mode.

  Try safe mode if your Mac does not end commissioning

  Thank you for using communities of Apple Support.

  See you soon!

• Have several active applications drain battery faster than to have just an active app?

  Have active several apps at the same time drain battery faster than to have just an active app at the same time?

  On an iDevice you have only one active application at any time in time. Applications is displayed when you click the home button twice are not active until you click on them.

  See you soon,.

  GB

• Installation of frozen blackBerry app World on my phone Smartphones

  I deleted Uber Twitter so I could re - install.  He has problems with a new password authentication.  Now the installation of it is frozen app World.  When I go to 'my world' and scroll down to Uber Twitter, it says "installation" but does nothing.  It's like this since yesterday.  I even re-installed app world and signed again.

  What can I do to cancel which settle and start over?

  AppWorld Hangup
  1. open the App World
  2. go to my world

  3. for the BB keyboard-oriented - hold down the ALT key and press "RST."
  3. for the storm - hold the num-lock ('! 123 ") button so that it hangs and then click on '(34).

  4. If your BB locks after issuing clear cache, do a battery pull reboot

• App Server 5.2 & RADIUS

  We have a Mac Mini server (macOS 10.12) with configured App (5.2) Server (active Directory and DNS Server Services Open, the network is on a static IP). We used to have an Airport Extreme set from the application server, with providing RADIUS authentication server.

  Now, we would like to add other extreme BaseStation from the airport to the network expand its range. We were already able to add another customer through Admin Tool Radius RADIUS. But, of course, access to the network via the second access point does not work.

  Application server is a really strange, because he gives, in many areas, rudimentary and owners is responsible for a large number of technologies, but if you want something you sort of a fall application server services. For example the App Server WebServices collide with advanced options for Apache, passenger, etc., once you try to configure something advanced Web services stop working. I hope that we will get configuration of the advanced features of future iterations. That's what concerns me here: Server App, basestations integration integration server App and RADIUS with several Airport Extreme BaseStation.

  1. as a result, I would like to know what kind of RADIUS support App Server provides it?

  2. Since the addition of a second Airport base station does not work, I guess I'll have to configure a RADIUS server outside the server application, probably as a result of this video: https://vimeo.com/53774350?

  3. but what happens to Airport base Station of the application server configuration, I was active for the first base station? Can I still configure Services and the server mapping App?

  4. should I maybe keep the base activated in App Server station, but disable the requirement of authentication via WiFi and configure a separate RADIUS server?

  5. What is the certificates: App Server already has a global certificate, I can use this instead of building a new one?

  6. the access group will be visible in App Server?

  I hope someone can help.

  When I "sudo radiusconfig - methods", I get:

  {

  clientcount = 2;

  set = 1;

  'eap.conf' = {}

  'CA_file' = ' / etc/certificates/server.seju.eu.xxxxxxxxxx.chain.pem ';

  Wilson = "/ Library/Server/RADIUS/raddb/certs".

  certdir = ' / Library/Server/RADIUS/raddb/certs ".

  'raddbdir' = ' / etc/certificates/server.seju.eu.xxxxxxxxxx.cert.pem ';

  "check_cert_cn" = "% {user name} ';

  "check_crl" = no;

  'raddbdir' = ' / Library/Server/RADIUS/raddb/certs/dh;

  'fragment_size' = 1024;

  "include_length" = yes;

  'private_key_file' = ' / etc/certificates/server.seju.eu.xxxxxxxxxx.key.pem ';

  "private_key_password" = "Apple: UseCertAdmin";

  'raddbdir' = ' / Library/Server/RADIUS/raddb/certs/random ";

  };

  'radiusd.conf' = {}

  AUTH = no;

  "auth_badpass" = no;

  "auth_goodpass" = no;

  'cleanup_delay' = 5;

  confdir = "/ Library/Server/RADIUS/raddb;

  'exec_prefix' = ' / Applications/Server.app/Contents/ServerRoot/usr ';

  "hostname_lookups" = no;

  localstatedir = "/ private/var;

  LogDir = "/ private/var/log/radius";

  "max_request_time" = 30;

  'max_requests' = 1024;

  prefix = ' / Applications/Server.app/Contents/ServerRoot/usr ';

  radacctdir = "/ private/var/log/RADIUS/radacct."

  certificate_file = "/ Library/Server/RADIUS/raddb;

  sbindir script configures = "/ Applications/Server.app/Contents/ServerRoot/usr/sbin";

  sysconfdir = "/ Library/Server/radius";

  };

  }

  When I "sudo radiusconfig - naslist", I get

  sudo radiusconfig - naslist

  customer IP.xxx.xxx.xxx {}

  secret = YYYYYYYYYY

  ShortName = "Base Station 1.

  Community =

  type = 'AirPort base station.

  Description =

  };

  customer IP.xxx.xxx.xxx {}

  secret = ANACHID

  ShortName = "Base Station 2.

  Community =

  type = 'Airport base station.

  Description =

  };

  Post edited by: Konstrukteur

  After some research, I got it to work. I went through all the steps in the video less access group. I guess my problem was obtaining the new base station, after be spent during the installation of the second base station and reset, everything works now! I also corrected some certification of related problems. I used the excellent Admin Tool Radius that is set correctly. Bad adjustment could have been the cause of my troubles!

  (1) I would like to know what kind of RADIUS support App Server provides it?

  It seems to provide a full support.

  (2) given that the addition of a second Airport base station does not work, I guess I have to configure a RADIUS server outside the server application, probably as a result of this video: https://vimeo.com/53774350?

  Always excellent tutorial, a bit outdated in macOS Sierra. My RADIUS server was already running a full server.

  (3) what happens to Airport base Station of the server application configuration I was active for the first base station? Can I still configure Services and the server mapping App?

  It works in our case

  (4) should I keep the base activated in App Server station, but disable the requirement of authentication via WiFi and configure a separate RADIUS server?

  It works in our case. No need to put in place the Radiusserver again. My incomplete Radius Server was probably a related problem of certification.

  (5) what about certificates: App Server already has a global certificate, I can use this instead of building a new one?

  Ray will use the certificate used in the server application. I used the excellent Admin Tool Radius to implement.

  (6) the access group (which is mentioned in the video) will be visible on the App?

  If you choose "view system accounts" under Server > discover then it should appear. But there is no need to access group, as RAY will use Opendirectory.

  If everything is working now. As I said I went over the steps alone once again, the problem I had, was probably related to the certificate or an error in the configuration of the Client.

  Now, I just have to find a way to get the RADIUS in Console logs, since they do not appear here in macOS Sierra!

• How see you captured by the app Apple Watch Workout training? app

  When you complete a workout using the Apple Watch of training application, it asks if you want to 'Save' the workout.  How you look at these recorded training? Most applications provide a way to see at least the last few workouts, for example, distance, calories, total time, steps, etc. While the different measurements are recorded in the activity log, it does not provide much information to each workout as a unit. I guess I could use another application, but believed that the Apple app would be better.

  Hello

  Try this link > http://www.macrumors.com/how-to/apple-watch-activity-workout-apps/

• Waving the hand on the active view is no longer works

  Hello! I recently did a factory reset on my Droid Maxx and now the active screen wakes up is when I place my hand on it. This is one of the main reasons I came back to my Maxx after winning a G3 to my work. Now, the screen wakes up only if I move the phone.

  I have cleared my cache, all active partition apps/disabled for active display notifications, set the display Active power and since this happened AFTER a factory reset, I'm hesitant to try wiping again.

  Android version 4.4.4

  View active version 1.2.29

  All applications are up to date, phone is in excellent condition and I even cleaned the screen in case it was not save my hand due to being dirty. No luck. All ideas are welcome! I saw the forum messages on the active screen not working not at all, but mine works, he don't wake without picking up the phone. I LOVED my "crystal ball phone!

  What is your system version in the connection settings? Indeed, a recent update has fixed this bug. Yes, the wave motion was actually a bug. A people of love bug, but always a bug.

  If you got an update recently that the phone now works as expected. Sorry if you miss.