actually means ' no dll splib don't was found in procedure waterfall "?
I had a breakdown with my editing software sony video vegas 6.0 and I got error messages like ' no dll splib don't was found in procedure waterfall ' and SPLib error
Hi Izon1,
You can try to uninstall and reinstall the Sony Vegas 6.0 video editing software and check if it helps.
You can also check the manufacturer's Web site to get help:
http://www.sonycreativesoftware.com/download/updates/vegasfamily
http://www.sonycreativesoftware.com/support/technicalsupport.asp
Hope this information is useful.
Tags: Windows
Similar Questions
-
Hallo weiss someone was found means that Fehler: 4MOT/4 / 40000003:HDD - 1232
Hallo... weiss someone was found means that Fehler: 4MOT/4 / 40000003:HDD - 1232
und wie ich diesen beheben kann?
Gruss aus Berlin Verena
Dass ein für die Fliegengitter ist Kuhlgeblases due. Es ist nicht schwer zu repair, aber Sie wollen einen Autorisierte Apple-Repair-Shop're zu tun: https://locate.apple.com/de/de/
-
Original title: my application can not start on Windows 7 just because one name of the subfolder is config
My application can run perfectly on Windows XP but not on Windows 7. When I run it in the debugger on Windows 7, it crashes, the debugger window displays the last loaded dll that is,.
Load "C:\Windows\System32\psapi.dll", no matching symbolic information found.My application configuration files are located in the subfolder 'config', to get my application to the top of race I must change his name to something else say 'ics_config', I run it in the debugger after changing the name of the subfolder, it shows the following dll after psapi.dll is uxtheme.dll.Load "C:\Windows\System32\psapi.dll", no matching symbolic information found."C:\Windows\System32\uxtheme.dll" dependent, no matching symbolic information found.I suspect that there is something wrong with uxtheme.dll, it can cause the application to crash if the name of the subfolder is "config."The application is our company product to the train control system, there is no change to the computer.Further investigation found that file "sso.cfg' in the config directory is the first cause, either rename file 'config' to something else orRename the file 'sso.cfg' located in the folder 'config' to something else so that my request to start.File 'sso.cfg' is a SSO configuration file, we use LDAP (active directory) to manage users and their privileges.Hope this information helps. -
RUNDLL - error loading c:\windows\wrypap.dll - specified module cannot be found, this happens after windows xp registry
There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool.Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.
If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.Here is a link to a popular registry backup tool:You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:Run Autoruns.exe and wait that he at the end of the filling of the list of entries.When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.Scroll through the list and look for a boot entry associated files in the error message.If you can't find on the connection tab, look in any tab.You can also click file, search to search for logon, or any tab for all or part of the name of the element.Right-click on the offending entry and choose Remove. If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.Given that you had or have an infection, followed with this:Perform scans for malware, and then fix any problems:Download, install, update and do a full scan with these free malware detection programs:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.Restart your computer and solve the outstanding issues. -
ATML Reporting: "an invalid character was found in text content."
When you use ATML and including non-ASCII characters (code decimal 128 and more), the generated report is not viewable in Internet Explorer (or Firefox, in fact), producing the error "an invalid character was found in text content." I think it's because TestStand isn't actually encoding the content of the report to the UTF-8 format. The same sequence produces a clickthrough report XML declaration. It seems that this issue has been found (and fixed) for the XML declaration but many years back.
If you open the attached XML file in UTF-8 compatible text editor (I used the Notepad) and re-save specifically in UTF-8 format, IE will happily consider subsequently report. The part that really confuses me is that TestStand generates successfully the temporary HTML version of the report for the integrated report viewer (also attached), the parser used internally by TestStand must be a bit more lenient than IE.
I've included an example with a VI sequence, which returns only a string of ReportText of these problematic characters.
ASBO-
Thank you for bringing This problem to our attention. This will be fixed in a future version of TestStand. In the meantime, you can fix this problem with your current version of TestStand by editing the reportgen_atml.seq file. I've attached an example of how you could modify the reportgen_atml.seq file to fix it in this position. Please, note that this is simply an example of correct behaviour and may not be the final implementation included in future versions of TestStand. I recommend that you do not replace or delete your reportgen_atml.seq file and save the version annexed to your
\Components\Models directory. I hope this helps. Thanks again for this bring to our attention.
-
Hello, I'm not able to get online at all sites with my system XP displays a 404 error code after a Trojan horse (trojan. ADH.2) was found and quarantined by norton. The system is slow or bottleneck at all, but I think that the registry has taken hostage by this Trojan horse. I tried to run Add ons, reset IE8, reinstall IE8 offline, I tried different users, tried to run a different browser (firefox). I can ping all the sites in the cmd prompt, but have no luck connection in the browser. A ran mohamed, superspyware, spybot. Is that what I can do without having to re install? I don't have the OS XP Media.
original title: error 404 on all sitesI wouldn't worry IPSec.
I think the most important things to address are:1 search for rootkits.2 empty the DNS.3 reset the proxy settings.4 reset the TCP/IP and Winsock settings.Good luck! -
---------------------------
Wzcsldr2.exe - Entry Point not found
---------------------------
The procedure entry point apsGetReady could not be found in the library of links dynamic wlanapi.dll.
---------------------------
Ok
---------------------------Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system. Not knowing the basic information a problem prolongs the frustration and the agony of these issues.
Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time. It might even be possible to solve a problem in a single response when enough information is provided.
Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.
Provide information on your system, the better you can:
What is your system brand and model?
What is your Version of XP and the Service Pack?
Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
The afflicted system has a working CD/DVD (internal or external) drive?
You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
Do you see that you think not you should see and when you see it?
If the system works, what do you think might have changed since the last time it did not work properly?
Googling a bit (very little) reveals that the file wzcsldr2.exe or wzcsldr3.exe belongs to a kind of device from D-link wireless connected to your system.
Fact that sound familiar and you have something like this installed?
If Yes, then I would get the page Support D-Link and find the latest driver for any device you use and install it. You may need to first uninstall your device running - I'm sure they must have instructions and tips for the procedure.
They also have an active Support Forum where you can post your problem/question to see if people there can help you get there. There is already some discussion in the forums about the problems you describe, but since we know absolutely nothing about your system, you should probably take it yourself.
I found a few other ideas through Googling, but I don't like some of the ideas I've read and if you stuff worked before, what do you think has changed since the last time it worked correctly? Did you update or reinstall your device from D-Link or drivers, lately?
-
How to exclude search results where the situation is just the right search term was found
Is there a way to exclude the results of search results where the search term appeared in the path/location of the file?
For example, I find the term 'XYZ' and am only interested in results that include XYZ in the name of the file (not the path) or in the content of the file. I want to have the screen of search results that appear only because "XYZ" was found in the path.
One thing is certain, you're familiar with some of the great powers in search bing or google? For example, how you can search something like this on bing:
How to set the folder site: cmdrkeene.com view (s)
This site: cmdrkeene.com tells your Internet search to look at only one site for these terms. Windows allows you to do the same thing in areas very choose what to look for. So for your case, type it like this:
filename:XYZ
Or if your file name includes spaces, type it between quotation marks, as follows:
file name: 'project xyz '.
This is a file if it has those in the special file name. This includes a file of type "Project WXYZ" because he always has these letters in it. If you want to ONLY have these letters, nothing else at all (exact matches only), you can put a ~ after the colon. That means "file name must exactly", then this:
file name: ~ 'project xyz '.
Although it would be unlikely to find anything, because most files have something after the name (such as .doc or something), so you can use a * generic, just like the old days:
file name: ~ "xyz project."
--------
It's probably more that you wanted to know, but the first example is what you :)
-
Hello
So I started with a Horizon view, so I apologize if this is a noob question. I wanted to try to put a security server in our DMZ, but before I put it in the DMZ I wanted to test whether customers would be on our network. So here's my setup:
Overview of VMware View Administrator 5.3.2 generation-188719
Same version for security server.
Windows Firewall is activated 'On' on all profiles on security and the server connection. (this might be important later)
Laptop with Horizon installed Client, Version 3.2.0 build-2331566
IPad Air2 with Horizon Client Version 3.2.0 build-2331566
On the Administrator display > display Configuration > Security servers > change on the Security Server
I PCoIP Secure Gateway set to the IP address of the Security Server (say its 192.168.1.10:4172)
Connection servers > edit on the login server
I also have the Security server defined as PCoIP Secure Gateway (192.168.1.10:4172)
Yet once I wanted to test it before I put it in the DMZ
So when I connect with the iPad, it works fine, I can connect, see all my connections and connect to just fine.
On the laptop, when I try to connect, I get the login screen where I put my user name and password (correctly, I might add ) and when I try and I get a connection error.
"Error: could not resolve the address of the server: the requested name is valid, but no data of the requested type was found."
I found the article KB VMware goes around the question: KB 2085365 (without help)
I changed the Secure Gateway on both safety and the connection to the server at each IP I can think of, but it still does not work.
Can someone give me an idea what can be wrong?
What is my firewall to connect to the server? (I don't remember if I had turned on firewalls when I installed the login server while they could not properly configured summer when I install?)
Any help would be amazing!
Thanks for reading!
I found the problem, it turns out that the network port to the Security server has been set for public and not private in the firewall. Thanks for the help!
-
I am running the following commanline...
'C:\Program VMware Consolidated Backup Framework\vcbmounter.exe' h vimlab.ourdomain.com u Administrator password - a 192.168.1.104:winxppro01 - r C:\mnt t fullvm Pei
2010-03-23 01:00:52.921 "BaseLibs" 3448 infoHOSTINFO: See Intel CPU, numCoresPerCPU 1, numThreadsPerCore 2.2010-03-23 01:00:52.921 "BaseLibs" 3448 infoHOSTINFO: numPhysCPUs is 0, bumping at 1.2010-03-23 01:00:52.921 "BaseLibs" 3448 infoHOSTINFO: numCores is 0, bumping at 1.2010-03-23 01:00:52.921 "BaseLibs" 3448 infoHOSTINFO: This machine has 1 UC physical and carrots 1 1 logical processors total.2010-03-23 01:00:53.687 "BaseLibs" 3448 infoUsing the libcrypto, version 90709F2010-03-23 01:00:53.687 "vcbMounter" error 3448Error: Another error: the requested name is valid, but no data of the requested type was found.I'm still new to VCB, so I don't know technically what I do. The vmdk files reside on an iSCSI Lun and I point the Server 2003 Windows VCB to the LUN using the MS iSCSI initiator and he see LUN. It see it as "Healthy (Unknown Partition)", but it see IT. My guess is that it should be able to see the files in the iSCSI LUN?
Anyway, just my SWAG (Scientific Wild Ass guess).
Using the '-san m "switch gives the same.
Any help on this is appreciated. I'm just trying to do a full backup of a virtual computer.
no doubt the '-a ' option does not. You must use it as '-a name:
Marcelo Soares
VMWare Certified Professional 310/410
Master virtualization technology
Globant Argentina
Review the allocation of points for "useful" or "right" answers.
-
PLSQL procedure with the ORA-01858: a non-digit character was found where
Hi friends,
I'm pretty much back to the plsql programming. I am creating the plsql procedure that basically accepts the values of variables and controls difference of two columns if she's even if different it inserts values into the temporary table GTT_S_DOC_QUOTE, and then inserts data into another table in s_doc_quote please help me or correct my procedure.
Since I'm getting below error ORA-01858: a non-digit character was found here where waiting a digital .my procedure is as below.
CREATE OR REPLACE PROCEDURE QUOTE_STS)
ROW_ID_IN GGATE_CT. GTT_S_DOC_QUOTE. ROW_ID % TYPE,
STAT_CD_IN GGATE_CT. GTT_S_DOC_QUOTE. STAT_CD % TYPE,
PREV_STS_CD_IN GGATE_CT. GTT_S_DOC_QUOTE. PREV_STS_CD % TYPE,
BU_ID_IN GGATE_CT. GTT_S_DOC_QUOTE. BU_ID % TYPE,
CREATED_IN GGATE_CT. GTT_S_DOC_QUOTE. CREATED % TYPE,
X_CRRNT_TOT_AGRD_RMS_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_TOT_AGRD_RMS % TYPE,
X_CRRNT_TOT_BLCKD_RMS_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_TOT_BLCKD_RMS % TYPE,
X_CRRNT_TOT_PCKDUP_RMS_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_TOT_PCKDUP_RMS % TYPE,
X_CRRNT_TOT_PCKDUP_AVGRT_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_TOT_PCKDUP_AVGRT % TYPE,
X_CRRNT_TOT_BLCKD_AVGRT_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_TOT_BLCKD_AVGRT % TYPE,
X_CRRNT_CNTRCT_SR_REVN_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_CNTRCT_SR_REVN % TYPE,
X_CRRNT_CNTRCT_FD_REVN_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_CNTRCT_FD_REVN % TYPE,
X_CRRNT_CNTRCT_BEV_REVN_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_CNTRCT_BEV_REVN % TYPE,
X_CRRNT_CNTRCT_RM_REVN_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_CNTRCT_RM_REVN % TYPE,
X_CRRNT_USD_EXCHNG_RT_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_USD_EXCHNG_RT % TYPE,
X_CRRNT_CNTRCT_OTHR_REVN_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_CNTRCT_OTHR_REVN % TYPE,
X_CRRNT_CNTRCT_RSRC_REVN_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_CNTRCT_RSRC_REVN % TYPE,
LAST_UPD_IN GGATE_CT. GTT_S_DOC_QUOTE. LAST_UPD % TYPE)
BEGIN
IF (PREV_STS_CD == STAT_CD) then
END if;
INSERT INTO GTT_S_DOC_QUOTE)
ROW_ID,
STAT_CD,
PREV_STS_CD,
BU_ID,
CREATED,
X_CRRNT_TOT_AGRD_RMS,
X_CRRNT_TOT_BLCKD_RMS,
X_CRRNT_TOT_PCKDUP_RMS,
X_CRRNT_TOT_PCKDUP_AVGRT,
X_CRRNT_TOT_BLCKD_AVGRT,
X_CRRNT_CNTRCT_SR_REVN,
X_CRRNT_CNTRCT_FD_REVN,
X_CRRNT_CNTRCT_BEV_REVN,
X_CRRNT_CNTRCT_RM_REVN,
X_CRRNT_USD_EXCHNG_RT,
X_CRRNT_CNTRCT_OTHR_REVN,
X_CRRNT_CNTRCT_RSRC_REVN,
LAST_UPD
)
VALUES ('ROW_ID_IN',
"STAT_CD_IN,"
"PREV_STS_CD_IN,"
"BU_ID_IN,"
"CREATED_IN,"
"X_CRRNT_TOT_AGRD_RMS_IN,"
"X_CRRNT_TOT_BLCKD_RMS_IN,"
"X_CRRNT_TOT_PCKDUP_RMS_IN,"
"X_CRRNT_TOT_PCKDUP_AVGRT_IN,"
"X_CRRNT_TOT_BLCKD_AVGRT_IN,"
"X_CRRNT_CNTRCT_SR_REVN_IN,"
"X_CRRNT_CNTRCT_FD_REVN_IN,"
"X_CRRNT_CNTRCT_BEV_REVN_IN,"
"X_CRRNT_CNTRCT_RM_REVN_IN,"
"X_CRRNT_USD_EXCHNG_RT_IN,"
"X_CRRNT_CNTRCT_OTHR_REVN_IN,"
"X_CRRNT_CNTRCT_RSRC_REVN_IN,"
'LAST_UPD '.
);
INSERT INTO S_DOC_QUOTE_CT
(ROW_ID_OUT, STAT_CD_OUT, PREV_STS_CD_OUT, BU_ID_OUT, CREATED_OUT, X_CRRNT_TOT_AGRD_RMS_OUT, X_CRRNT_TOT_BLCKD_RMS_OUT, X_CRRNT_TOT_PCKDUP_RMS_OUT, X_CRRNT_TOT_PCKDUP_AVGRT_OUT,
X_CRRNT_TOT_BLCKD_AVGRT_OUT, X_CRRNT_CNTRCT_SR_REVN_OUT, X_CRRNT_CNTRCT_FD_REVN_OUT, X_CRRNT_CNTRCT_BEV_REVN_OUT, X_CRRNT_CNTRCT_RM_REVN_OUT, X_CRRNT_USD_EXCHNG_RT_OUT, X_CRRNT_CNTRCT_OTHR_REVN_OUT,
SELECT X_CRRNT_CNTRCT_RSRC_REVN_OUT ROW_ID), STAT_CD, PREV_STS_CD, BU_ID, CREATED, X_CRRNT_TOT_AGRD_RMS, X_CRRNT_TOT_BLCKD_RMS, X_CRRNT_TOT_PCKDUP_RMS, X_CRRNT_TOT_PCKDUP_AVGRT,.
X_CRRNT_TOT_BLCKD_AVGRT, X_CRRNT_CNTRCT_SR_REVN, X_CRRNT_CNTRCT_FD_REVN, X_CRRNT_CNTRCT_BEV_REVN, X_CRRNT_CNTRCT_RM_REVN, X_CRRNT_USD_EXCHNG_RT, X_CRRNT_CNTRCT_OTHR_REVN,
GGATE_CT X_CRRNT_CNTRCT_RSRC_REVN. GTT_S_DOC_QUOTE;
COMMIT;
end if;
end QUOTE_STS;I was wondering why I get this error even if I stated the PREV_STS_CD
What line do you think that you said PREV_STS_ID on? As far as I can see that the IF statement is the first mention of it in your code. My guess is that you mean PREV_STATS_ID_IN (goes the same for STAT_CD / STAT_CD_IN).
If you write
IF prev_sts_cd_in = stat_cd_in THEN NULL; END IF; do_something_here;then "do_something_here" will be processed regardless of the IF condition. I think what you probably wanted was something like
IF prev_sts_cd_in = stat_cd_in THEN NULL; ELSE do_something_here; END IF;Is it possible for the prev_sts_cd and the stat_cd null? The test above would not handle this.
Also, as others have mentioned, the first INSERT statement attempts to insert the strings like "ROW_ID_IN" you probably want to use the value of the ROW_ID_IN parameter, which is the reason why you get the error ORA-01858. I'm guessing here of course, but I took out the quotes.
That would make your code something like this:
CREATE OR REPLACE PROCEDURE quote_sts ( row_id_in ggate_ct.gtt_s_doc_quote.row_id%TYPE , stat_cd_in ggate_ct.gtt_s_doc_quote.stat_cd%TYPE , prev_sts_cd_in ggate_ct.gtt_s_doc_quote.prev_sts_cd%TYPE , bu_id_in ggate_ct.gtt_s_doc_quote.bu_id%TYPE , created_in ggate_ct.gtt_s_doc_quote.created%TYPE , x_crrnt_tot_agrd_rms_in ggate_ct.gtt_s_doc_quote.x_crrnt_tot_agrd_rms%TYPE , x_crrnt_tot_blckd_rms_in ggate_ct.gtt_s_doc_quote.x_crrnt_tot_blckd_rms%TYPE , x_crrnt_tot_pckdup_rms_in ggate_ct.gtt_s_doc_quote.x_crrnt_tot_pckdup_rms%TYPE , x_crrnt_tot_pckdup_avgrt_in ggate_ct.gtt_s_doc_quote.x_crrnt_tot_pckdup_avgrt%TYPE , x_crrnt_tot_blckd_avgrt_in ggate_ct.gtt_s_doc_quote.x_crrnt_tot_blckd_avgrt%TYPE , x_crrnt_cntrct_sr_revn_in ggate_ct.gtt_s_doc_quote.x_crrnt_cntrct_sr_revn%TYPE , x_crrnt_cntrct_fd_revn_in ggate_ct.gtt_s_doc_quote.x_crrnt_cntrct_fd_revn%TYPE , x_crrnt_cntrct_bev_revn_in ggate_ct.gtt_s_doc_quote.x_crrnt_cntrct_bev_revn%TYPE , x_crrnt_cntrct_rm_revn_in ggate_ct.gtt_s_doc_quote.x_crrnt_cntrct_rm_revn%TYPE , x_crrnt_usd_exchng_rt_in ggate_ct.gtt_s_doc_quote.x_crrnt_usd_exchng_rt%TYPE , x_crrnt_cntrct_othr_revn_in ggate_ct.gtt_s_doc_quote.x_crrnt_cntrct_othr_revn%TYPE , x_crrnt_cntrct_rsrc_revn_in ggate_ct.gtt_s_doc_quote.x_crrnt_cntrct_rsrc_revn%TYPE , last_upd_in ggate_ct.gtt_s_doc_quote.last_upd%TYPE ) IS BEGIN IF prev_sts_cd_in = stat_cd_in THEN NULL; ELSE INSERT INTO gtt_s_doc_quote ( row_id , stat_cd , prev_sts_cd , bu_id , created , x_crrnt_tot_agrd_rms , x_crrnt_tot_blckd_rms , x_crrnt_tot_pckdup_rms , x_crrnt_tot_pckdup_avgrt , x_crrnt_tot_blckd_avgrt , x_crrnt_cntrct_sr_revn , x_crrnt_cntrct_fd_revn , x_crrnt_cntrct_bev_revn , x_crrnt_cntrct_rm_revn , x_crrnt_usd_exchng_rt , x_crrnt_cntrct_othr_revn , x_crrnt_cntrct_rsrc_revn , last_upd ) VALUES ( row_id_in , stat_cd_in , prev_sts_cd_in , bu_id_in , created_in , x_crrnt_tot_agrd_rms_in , x_crrnt_tot_blckd_rms_in , x_crrnt_tot_pckdup_rms_in , x_crrnt_tot_pckdup_avgrt_in , x_crrnt_tot_blckd_avgrt_in , x_crrnt_cntrct_sr_revn_in , x_crrnt_cntrct_fd_revn_in , x_crrnt_cntrct_bev_revn_in , x_crrnt_cntrct_rm_revn_in , x_crrnt_usd_exchng_rt_in , x_crrnt_cntrct_othr_revn_in , x_crrnt_cntrct_rsrc_revn_in , last_upd ); INSERT INTO s_doc_quote_ct ( row_id , stat_cd , prev_sts_cd , bu_id , created , x_crrnt_tot_agrd_rms , x_crrnt_tot_blckd_rms , x_crrnt_tot_pckdup_rms , x_crrnt_tot_pckdup_avgrt , x_crrnt_tot_blckd_avgrt , x_crrnt_cntrct_sr_revn , x_crrnt_cntrct_fd_revn , x_crrnt_cntrct_bev_revn , x_crrnt_cntrct_rm_revn , x_crrnt_usd_exchng_rt , x_crrnt_cntrct_othr_revn , x_crrnt_cntrct_rsrc_revn , last_upd) SELECT row_id , stat_cd , prev_sts_cd , bu_id , created , x_crrnt_tot_agrd_rms , x_crrnt_tot_blckd_rms , x_crrnt_tot_pckdup_rms , x_crrnt_tot_pckdup_avgrt , x_crrnt_tot_blckd_avgrt , x_crrnt_cntrct_sr_revn , x_crrnt_cntrct_fd_revn , x_crrnt_cntrct_bev_revn , x_crrnt_cntrct_rm_revn , x_crrnt_usd_exchng_rt , x_crrnt_cntrct_othr_revn , x_crrnt_cntrct_rsrc_revn , last_upd FROM ggate_ct.gtt_s_doc_quote; END IF; END quote_sts; -
I get the text informing that "lost-mode device was found." citing IOS 9.3.2 and say to connect to Internet link provided - this looks terribly strange - suggestions
There has been a number of reports of other something similar. He tries to get you your password into a Web site that looks like an official Apple site, but is not. They can then use your password to bypass Activation lock.
-
RES://C:\Windows\system32\mmcndmgr.dll/views.htm (error not found)
HI, I am unable to solve this help please me...
RES://C:\Windows\system32\mmcndmgr.dll/views.htm (error not found)By these Services on the server are not begin in 2008r2
(1) group policy(2) Service Control Manager
(3) the Client DNS events
(4) browser
(5) Kerberos security
All the above services do not solve & due to this FSMO roles are
not work & unable repeated files.Please help me on this point, it's to create a big problem for me here.
Hi Varun,
I suggest that you post this question in the Windows Server 2008 support TechNet forums: http://technet.microsoft.com/en-us/windowsserver/bb512923
Thank you.
-
Error: "Microsoft Client Protection was found" during the installation of Windows Defender
Original title : Blonde needs simple help
(while trying to install Windows defender) Microsoft Client Protection was found. Remove and run WHERE AND HOW? Im blonde, what can I say
Looks like you already have Microsoft Security essentials installed. Windows Defender is not necessary if you use Microsoft Security Essentials. Microsoft Security Essentials has its own antispyware component builtin and allows you to disable Windows Defender by design.
-
has recently had to restore my old computer. When I try to play games on facebook its telling me to install adobe flash plyer x. but it will not be installed. Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!
Hello
I suggest you to follow the steps in this link and check if it helps:
It will be useful.
Maybe you are looking for
-
I had a Library/Startupitems error since update my software HP a couple of years ago. Trying to finally solve this problem myself, the HP site suggested to remove and reinstall the software. There are no active link in the pages of HP support for a
-
Oleaut32.dll seems to be on the computer but the 3rd party install can't find it
A brief history. I got the Itunes error for months. I lived with him (after failed it several attempts at correction). To do this, I'll post the following event log error. Now I am trying to install software for a video camera and it can not find the
-
(Redirected) My Windows laptop, 10
My Windows laptop, 10 is so completely insensitive and tone with a black screen. Just to remind you that it is a Windows 10 laptop. The beeps have no patern I looked online and the beeps do not follow any code. If you have an idea on how to fix this
-
I understand the purpose of the guardians and transfers of appeal between them, etc. What Im looking for is some real world scenarios and how they would work. Im working on a design that involves global six guards. There will be clusters of Callmanag
-
PIN to release blackBerry Smartphones help!
Hi guys my PIN will be automatically released on the BIS to change device?I already change my device my previous PIN is now released?