ad hoc problem

Similar Questions

• Ad hoc problem with windows 7 and my I protect 3

  Hi I have the same problem with windows 7. It worked perfectly, last week and it now has the same msg. I followed the steps and it does not always help you. It works if I am close to a router and then I can put in place a special but will come with errors as the wi is off and it then resets it. Once reset the same msg saying windows cannot implement... Please help I use my I pad for virtual dj
  Now it is set up, but have a problem. It says no network share and it let me use something else, the I pad I joined and it shows on both devices, but does not open virtual dj. It worked last week

  Hello

  These links may help you.

  http://forums.techguy.org/networking/897027-Windows-cant-set-up-ad.html

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/why-win-7-cant-remember-network-location-for-ad/d57f4440-238a-490f-96d5-cd4475888d3b

• Essential AS3.0 by O'Rielly

  According to most peoples advice I bought essential as3 and Im that it is extremely useful and yet at the same time extremely difficult to understand, I think read the book 3 times or 4 to get a good understanding of certain subjects. Now my question is, Im I really hurt in the DSU or it's really hard to understand sometimes that book? I really want to become an expert in as3 and the more I read and less I understand, the motivation that I lose. To become a pro at AS3 should I move to the United States and start taking courses and seminars or the general public think its really possible to teach your AS3 auto through books and amounts in fact to a pretty decent programmer?

  I think of programming as a combination of analysis and resolution of problems. The code is the tool to solve problems. And then there are things like the standards and conventions etc. But I think that coding is also 'creative' in a 'creative' only regular sense (I mean by visually or literary talent people - unlike me) wouldn't consider perhaps "creative".

  Books can help you with common or specific strategies for solving unique or similar (for example design patterns) or provide references to issues specific or standard, etc.

  But beyond that, I think it's a matter of affected by problems and solve them, a series of your own "aha" moments. Each person has their own balance concrete (do) vs reference based learning (e.g. reading) that works best. Many books try to provide a combination of both giving you some example problems and solutions as well.

  So I guess you just have to find the right balance for you... one of the best ways to get a hands-on experience of a wide range of ad-hoc problems is by helping in the forums...

• Problem with installing Laserjet P1102W - Ad-Hoc - can't change mode of Communication of Ad Hoc

  I have a printer HP Laserjet P-1102W which was installed in Ad - Hoc mode for a short time.  The unit can, however, connect via USB and works very well in this mode, but I want to use it as a Wifi unit with my router and the APs. The unit has a 20130703 firmware datecode. I need to reset the mode of communication out of the "Ad Hoc" mode.

  With the printer is NOT connected through the USB port and holding down the 'X' button to print the "Self Test / Configuration of the device"sheet shows that the status = not connected. " The MAC address displays address 12 characters, the IP address is 0.0.0.0, as is the subnet mask and the gateway. The "IP configured by Hand with the server DHCP/BOOTP = 0.0.0.0 =. The 802.1 b / g Wireless Status = Enabled and the Communication mode = Ad Hoc, SSID = HP4FA96D with authentication = None (open).

  I tried to reset the unit by pressing down the wireless and 'X' buttons located on the top of the machine, but this action does not change the mode of further Ad Hoc communication. I looked through the USB print driver in Windows 7 Pro, but can find no access to wireless settings, and as the camera doesn't have an IP address, I can't access the built in web server.

  Any suggestions on how to completely reset the unit so the Mode of Communication is NOT "Ad Hoc"?

  Concerning

  IT IS FIXED - READ BELOW:

  After trying the patches recommended by other users, download the latest firmware, the driver more current and also help in the HPPSdr.exe of the HP program, making a unit restart by pressing both buttons when the device has been propelled to the top (this is only a partial and not completely reset reset) the unit would not clear the AD - Hoc mode and return to the wireless infrastructure mode.

  The last step, I tried (without the help of HP or the community) was to find the original disc of 2009 and first install it like a USB connected printer. If successful, then a second set with USB cable attached as a wireless printer. It helped me finally change the settings DHCP wireless, assuming, SSID, etc.. Once completed, and unplugged the USB cable, the printer now works as a printer wireless assuming with my router and access points.

  We have NOT ALLEGED on HP support pages for this printer trying to use older software install the disc and make a several step installation - shame on HP!

  The community of HP came with some good ideas, suggestions did not fix of unfortuantely this problem. The printer is out of warranty, so HP Corp. would NOT  provide any help (by e-mail or otherwise) unless I used either the HP community or pay them $24.95 for once call phone support. It seemed stupid to pay 25% of the new value of the printer four years ago.

  Given this bad experience with the lack of support for current HP products which exceeded their warranty period, I can't recommend HP products to my clients or friends. Shame on HP for this contempt for their customers!

  Peter

• problem with Internet connection sharing, error: connection ad - hoc has "no internet access" on the cell phone of the customer

  Original title: problem with Internet connection sharing

  my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter

  in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICS
  then the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".
  so, I'm a person answer in this forum
  ' Obtain an IP address automatically is the wrong setting on the Ethernet connection. "  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  "DNS server: none.

  I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IP

  and made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have create

  I tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.

  What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settings

  But why after I restart my PC, this problem comes...

  someone knows how to help me with this problem?

  Hey, Mimbs,

  You can try the similar thread to the next with a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/no-Internet-access-in-the-client-machine-when/77312e09-4385-41FA-A420-0c42be58e4e3

  Also for reference:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• Problem with ad-hoc connection

  I recently had some problems with my University's broadband connection, my computer told me that "there is another computer with the same IP address on the network". This had never happened before, but I went our site computer and found that they were suggesting some settings of the LAN adapter. After that I put these settings in, my university broadband connection worked as well as it ever has.

  However, when I try now to set up an ad-hoc connection so that my Nokia e63 can use wifi to browse and download apps, I find that the "Enable Internet connection sharing" button does not appear when I reached the last step of establishing an ad hoc network.

  My E63 can detect and connect to the network, but it is impossible to browse. I'm sure this isn't a problem with the phone, because it works with other wifi connections. My ad-hoc connection does not appear in my list of 'manage wireless networks '. It is listed as 'Unidentified network' for awhile in my network center and share, but then disappears.

  I can connect to other WiFi networks, and my local network is fine. Ad hoc is the only problem. I tried to change the settings of the wireless adapter, but it doesn't work.

  When I go to the tab "Network connections", it says that my wireless network card is not connected. When I said to diagnose the problem, it is said that the profile of the wireless network (I think it means my ad hoc network) was not saved because of a parameter error.

  Help, please. I wil be pleased to provide additional details.

  Hi glacierthief,

  You will need to remove all ad-hoc connections, and recreate a.

  You can read the following article and try to reset TCP/IP and check what is happening.

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  You can also check the following links for more information on configuring ad hoc network:

  Set up a computer-to-computer (ad hoc) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Hope this information is useful.

  Jeremy K.
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem creating ad hoc network-error: Windows could not set up the network.

  Original title: problem creating ad hoc network

  Hello dear,

  When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

  I use windows 7.

  P.S. before I used to create the ad hoc network with no problems. But now no more.

  Kind regards

  Ana Paula Yousef

  Hello

   
  Did you change in the computer before this problem?
   
  I suggest to go through these steps and check.
   
  Method 1:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
   
  You can also check:
   
  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• Problems to use remote desktop in an ad hoc network.

  Hello
  I want to control my desktop with my Tablet - both running windows 7 but I'm having a few problems.
  First, I create an ad hoc network on one computer and connect with each other via the wireless. No problem - I drop part I activate the remote desktop on both computers. In the system, I authorize remote connections on both computers and have tried the two authentication network-level and 'everything' version of the remote desktop.  What happens is this, I get a warning that this is not a recognized certificate but continue anyway, so I give the password for the office, and then the screen turns white and then changes to the start screen where I have to reconnect and disconects of Wi - Fi ad-hoc... advice?

  Hi Amy,

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Networking Windows 7 TechNet forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Problems with ad-hoc internet compirtir

  Saludos has created ad hoc red una y al end el proceso no me da the internet sharing option is can activar in otro sitio,

  Gracias y saludos nuevo

  Hello

  You asked your question in the text of the Microsoft Community. Please you would click on the 'Change Region' button down to the left of the screen and select your preferred language. Now ask you question once again.

  Thank you.

  Translation of Bing above:

  Hola

  Han pedido knew pregunta en version in English of the Microsoft Community. Please select su idioma preferido, c, haga click in el boton "cambio Región" in the lower part the pantalla izquierda. Ahora pedir pregunta, otra vez.

  Gracias.

• I have problems with my 7510 holding a wireless ip address 192.168 etc. He said 169. etc.

  My HP Photosmart all-in-one (which is only a few months old) stopped communicating with my router Netgear DGN1000 Adsl a few days before Christmas.

  Instead of the 192.168.0.9 ip address that he used before I turned off the router, ITI is back with an address of 169.254.249.128; 'Source setup' = 'Auto ip "; a subnet mask of 255.255.0.0; and default gateway 0.0.0.0. I know that they are bad, so I tried a fixed ip address to 192.168.0.201, a SM 255.255.255.0; and a DG 192.168.0.1; It was OK, but the next day, returned to the auto ip settings.

  I finally managed to contact HP and the guy spent 75 minutes with me trying to restore things and finally the village that the Netgear router did not have access to the printer via certain ports (which he sent me a list of) and something he said that I had to tell my ISP (Virgin media) "FLOOD DETECTION SET to OFF" & "SP1 FIREWALL SET TO OFF.

  Communicating with VM, they were insistent that their router was not at fault - they could open ports 12 or so, at a cost to me of 60 pounds! (I refused this)

  HP told me how to set up for printing Ad Hoc (bypassing the router), who had worked during our tests.

  VM has been in my settings for the router, via a remote access device and verified a few settings, but the only one, I saw them alter was CH10 CH11 to change.

  I could certainly not the printer to accept the 192.168.1.201 after that anyway.

  As a result, I have reset the network default printers and reconfigure wireless settings. He seemed OK and running on 192.168.0.9

  I have now reset IP address in the manual on the printer, by entering the 192.168.0.9 and 255.255.255.0; and 192.168.0.1;

  Touch wood he delayed for a few days, but I havn't turned off anything (but during the night before it went wrong!)

  I'm not convinced I have a solution here and would welcome any suggestions as to what I can still do it.

  Maybe I already have some, as I "completely uninstalled and reinstalled the software HP7510 on my desktop PC.

  Incidentally, the printer is set up on 3 PCs in the House - a desktop computer under W7 HP 64 bit, a laptop (same model with BONES) and a laptop under W7 HP, but 32-bit computer.

  All were unable to print when I had problems.

  I would appreciate any suggestions for a fix permanat more. (I would have rather found a final breakdown) I have all other routers, I could try, or I could open ports, but my question is - if I had need of these open ports and other settings (detection of flooding etc.) why the work of the printer for the first few weeks I had it implemented, and why turn off the router caused these issues? (Assume that I need in the future - to turn off the router happens)

  Thank you

  Dave

  Hi Dave,.
  
  Great post with good information.
  
  As you mentioned, the printer came back with a style 169.xxx.xxx.xxx IP address. This is normally produced when the device is not able to get a full connection with the router, router it gives an internal IP address.
  
  Normal suggestion when a printer continues to maintain a connection is to assign a static IP address. This is done by using the manual IP functionality, you've talked about using. This locks the device to the network settings, and even when the network is restarted the information is preserved. This should be the solution to the issue.
  
  I hope this helps.

• Satellite Pro A120 has network problems

  Mr President.

  I, Jayarajan.C.N, working as an Assistant Executive Engineer in the Kerala State Electricity Board, Kerala, India.
  We had a laptop brand Thoshiba (Satellite Pro A120 type; PTA83L-08L02N model number; SL.no. Y6131B1488H) as part of a package of type brand MD - 2000 Tesient relay.

  We use this laptop for other official purposes also. It works smoothly.

  But we were faced with the following problems:
  1. we could connect the computer laptop in Local Area Networking with other desktop computers and laptop. But we could not transmit or receive data from the other computer.

  2. we could connect us the laptop to the network in ad-hoc mode wireless and the laptop showed the link as 'excellent '. But as in the case of LAN, data may not be transferred or received.

  3. we tried to use dial-up modem to the laptop. But we do not have internet access. The error showed was 'busy line (error 676) '. In fact, the line was not busy.

  4. we checked to access internet using Reliance Netconnect USB modem after installing its software. He also failed in showing the "username & passwords are wrong in this area.

  5. I added an init string in the Toshiba modem commands: AT & FX1. But before that, I made a mistake. I installed the Client Services for Netware. After that, the connection mode was changed. But I don't know how to uninstall "client services for Netware". I selected the account control user - change the way users log on or off, I received the following message: "client for Netware has disabled the display of welcome and quick user agrees." To restore these features, you must uninstall client services for Netware. As I said before, I don't know how to uninstall the same. Now during log on, I have to use ctrl + alt + delete to log on.

  After you have added the string init AT & FX1, I have only seen the modem trying to catch the net until the "veryfying username and password. But he could not catch the net. Please note that I had installed the client services for Netware. I saw that the modem has been "connecting" even after a few minutes and I noticed the system reacted very slowly.

  In short, we cannot achieve any type of networking and by error logging has been changed...
  We ask your advice detailed without delay.
  Thanks in advance.

  Regarding
  DANIELA. C.N,
  Assistant Executive Engineer,
  [email protected]

  Hello

  Please don t be angry with me, but this is a user-forum user and please don t expect magical solutions or answers.
  However, I will try to give some suggestions.

  1.) Please check if you are in the same workgroup or domain and check if you have set the right rights to folders. In addition to check all the parameters of the firewall and possibly disable it please!
  (2) see point 1)
  3.) found a Microsoft document describes this error message:
  http://support.Microsoft.com/kb/187215
  or
  http://Xtra.co.nz/help/0, 5721-2513242, 00.html

  (4) Please check the user name and password. Please note; It case sensitive s

  (5) If you want to remove the Client Service for Netware, click on START/SETTINGS/CONTROL PANEL/CONNECTIONS NETWORK. On your CONNECTION to the local AREA NETWORK right click, select properties and click on it, then highlight "CLIENT SERVICES for NETWARE" and click the "UNINSTALL" below

• Satellite A200 - 24 - need help with ad - hoc connection

  Hello

  I have a Toshiba Satellite A200-24 which is connected to the internet via ADSL.

  Also, I have a laptop and I want to share internet between them in my apt.
  In Win XP it should do so through the Connection Wizard, but in vista, it is "ad hoc connection".

  However, when I try to do, I get a message that windows cannot create my new network.
  I have searched all over the net for a solution and those who have the same problem as me.

  Have computers with Satellite...

  Hello

  I think you should check this page:
  http://www.LyteByte.com/2007/02/21/how-to-share-one-Internet-connection-with-another-computer-using-Vista/

  Here you have find some information and details (screenshots) how to share one Internet connection with another computer using Vista?

  This page could also be interesting:
  http://thehiddenguide.com/how-to-share-two-computers-with-one-Internet-connection-on-Vista/

  Please post comments!

• Problems with music (stop) playing and attachment

  Guys, bought this Milestone 2 (froyo 2.2) some weeks to the Brazil. Great device, but consumes a lot of battery and got two major issues so far:

  (1) no endearing not work (using the local carrier Vivo or TIM) - after having included ', dun' with 'default' on the type of APN, he is able to connect to 3 G, but the ad hoc network is not broadcast.

  (2) simple can not play music... actually, it plays for about 1 minute or so and stops. Music app is still running (I tried embeded music + and Cubed) but the music is stopped, not paused. This occurs when you are using headphones or without, when pluged to feed or not...

  Some of the people with the same problem on other forums.

  Clues?

  Which Motorola could maybe check this? Don't know if this Froyo associated...

  Kind regards

  Tiago.

  Hello.

  on the subject of 1) Milestone 2 has a mobile hotspot, not home (ad hoc mode). If you would link to the Milestone 2 the same way as on your WiFi at home.

  You are able to find the Milestone 2 Hotspot as a router, once it starts?

  (2) first of all, please check if the connected music player is not included in auto taskmanagers builtin off list.

  Then check if the time-out in the connected music player is disabled.

  I had this problem once. After a reset, the player worked fine again, so this might also be worth a try.

  tiago_br wrote:
  Guys, bought this Milestone 2 (froyo 2.2) some weeks to the Brazil. Great device, but consumes a lot of battery and got two major issues so far:
  (1) no endearing not work (using the local carrier Vivo or TIM) - after having included ', dun' with 'default' on the type of APN, he is able to connect to 3 G, but the ad hoc network is not broadcast.
  (2) simple can not play music... actually, it plays for about 1 minute or so and stops. Music app is still running (I tried embeded music + and Cubed) but the music is stopped, not paused. This occurs when you are using headphones or without, when pluged to feed or not...
  Some of the people with the same problem on other forums.
  Clues?
  Which Motorola could maybe check this? Don't know if this Froyo associated...
  Kind regards
  Tiago.
  

• Connectivity Wifi U330p problem

  Hello!

  It's about a week I have my new lenovo u330p and I have a lot of problems with the Wifi at my house. my laptop is 30cm distance from the router but 1,1.5 hourly, I lose my connection, so it works again if I go on airplane mode and then turn on the WIfi... and sometimes disconnection occurs much more often and I have to restart my computer.

  Is there any solution for this? or it's just my problem?

  I tried the latest intel Driver (Wireless N 7260) thing am worse, so I downgraded to the original driver.

  I'll send my laptop if I can't find any solution for my problem

  I found a solution by mixing your solution and a few others, it works fine now, here are all the things that I've done, maybe some are useless. Remember that my windows is in German so I had to translate the names, it's pretty clear:

  1. switch to update to the latest firmware wireless
  2 uninstall the software intel proset/wireless for windows
  3. right click on the windows logo in the taskbar and select "Network connections" (in German: Netzwerkverbindungen)
  4. right click on the Wifi and choose "Properties".
  5. click on "configure".
  6. on the second tab, change "802.11n channel width 2.4 GHz" "20 MHz.
  7. activate the WMM mode mode "Ad - Hoc QoS"
  8. change the "wireless mode" to 802.11 g
  9. in the last tab, disable the ability for PC turn on your wireless device.
  10. don't forget to restart at the end.

  tnxx

• Transmission of data via the Ad Hoc network in LabVIEW

  Hello

  I'm trying to transmit some data (position, speed, etc.) a laptop computer to a host computer.

  The laptop and desktop have the card installed wireless so I thought this would be a good

  the idea of transmitting data via Wi - Fi using TCP.

  However, the problem is that there is no router/modem in the area where the laptop is sitting

  so, I create a network of Ad-hoc (computer to computer) between the laptop and the desktop computer.

  Then, I use "ipconfig/all" in the Windows command prompt to extract the IP as follows.

  IP address wireless laptop: 169.254.165.72

  IP address Wireless Desktop: 169.254.102.126

  Desktop Ethernet IP address: 129.94.229.230

  I then use the code example in the TCP library named 'Data Server.vi' and "Data Client.vi."

  I listen on port 6340 times the wireless and ethernet desktop on the side map server.

  And on the side of the customer, I opened a connection to port 6340 169.254.102.126 IP address.

  However, the connection cannot be granted. Anyone know why this is the case?

  Note: I have disabled all firewalls.

  Interesting, when 2 computers are connected to the same modem, their IP addresses

  differ only by the last number (e.g. XXX.XXX. XXX.123 vs XXX.XXX. XXX.256), but when an ad

  the House of Commons network is established, their IP addresses have 2 numbers that are different. (XXX.XXX.

  102,126 vs XXX. XXX.165.72) I wonder if this has nothing to do with the failure.

  Thanks for all your help.

  Ron Liou

  I somehow this job.

  What I've done

  -Once again set up an Ad hoc network for the labtop and Office

  -verification of the IP address is always the same

  > Portable wireless IP address: 169.254.165.72

  > Portable wireless subnet mask: 255.255.0.0

  > Wireless Office IP address: 169.254.102.126

  > Wireless Office subnet mask: 255.255.0.0

  -switch on the ICS of the ethernet on the desktop card

  (This resulted in an IP different addresses assigned beng)

  > Portable wireless IP address: 192.168.137.21

  > Portable wireless Subnet Mask: 255.255.255.0

  > Wireless Office IP address: 192.168.137.1

  > Office Wireless Subnet Mask: 255.255.255.0

  Now I use the ip address of office (192.168.137.1) to open the connection

  and it works! ??

  I am very pleased with the fact that it works but I would like to have one

  explanation on why it takes an ICS.

  Thank you!