adalnctl.sh out with status 1

Similar Questions

• adopmnctl.sh out with status 2

  Hello
  
  I am new to Oracle Apps and could successfully install R12 with the help of the tutorial to some < site >.
  
  After the installation, intended to take the system snapshot to restore because I won't go well again the installation which took almost 2 weeks for me :(
  
  System backup is not successful and recommended to run CHKDSK
  
  I have not stopped all treatment Apps and rebooted the machine to run CHKDSK. He finds some bad cluster and that fixed it.
  
  I started VMWare and R12. From that moment, get 'adopmnctl.sh out with status 2' and other dependent applications and on that same State during the d'apps/apps./adstrtal.sh command
  
  I found the solution in someother post fortunately located under the solution that worked for someone else. I don't have access to Metalink and want to have solutions in these notes to solve the problem on my machine.
  ******************************************************
  DB-Tier Autoconfig errors ORA - 12705: cannot access NLS files or invalid environment specified [548916.1 ID]
  ORA-12705: cannot access NLS data or invalid environment files specified, running Autoconfig [ID 561422.1]
  AutoConfig fails on the database layer [ID 470254.1]
  ******************************************************
  
  Where can I find notes above for solve the problem? Someone even kind of measures to solve the problem for users like me?
  
  Note: There is no erros after the execution of automatic configuration for DB and Apps. No problems with the host file also.
  
  Thank you
  Srinivas

  You need to start debugging further from this work and I need your help to solve this problem.

  Check the files for more information on this error in Apache logs.

  You are now all operational services?

  Thank you
  Hussein

• Impossible to start an Instance of R12 adstrtal.sh out with status 1

  Hi - I am unable to restart my server R12 properly off.
  
  1)
  
  I seem to have the database and listener of the database to the top with its respective scripts.
  
  
  /D01/Oracle/vis/DB/tech_st/11.1.0/appsutil/scripts/VIS_oracle
  
  Su oravis
  (a) Demarrer./addbctl.sh
  (b) debut./addlnctl.sh VIS_oracle
  
  But I can't script the application is running.
  
  2)
  
  Su applvis
  
  / D01/Oracle/screws/inst/Apps/VIS_oracle/admin/scripts
  
  ./adstrtal.sh applvis/applvis
  
  adstrtal.sh: the base connection could not be established. The database is out of service or applications provided credentials are wrong.
  
  USE: adstrtal.sh < appsusername/appspassword >
  
  
  adstrtal.sh: leave with the State 1
  
  Now, I checked the applvis password is just because I changed under system-> Administration-> user groups
  
  The guide I followed especially for my installation directory is the following:
  
  http://eyeonapps.Gendron.ca/?p=12
  
  
  3)
  
  Now, I read somewhere it is possible with the environment file not native, but where this file, I saw a couple of places, also under what user should I source calling it?
  
  Also, is there a way I can give all users permission in the /d01 directory, to avoid problems like these.
  
  Would appreciate the help to get the application running server.
  
  Thank you!

  Hi user;

  I seem to have the database and listener of the database to the top with its respective scripts.

  /D01/Oracle/vis/DB/tech_st/11.1.0/appsutil/scripts/VIS_oracle

  Su oravis
  (a) Demarrer./addbctl.sh
  (b) debut./addlnctl.sh VIS_oracle

  Please log on as oravis and source EPS file, and then it comes:

  sqlplus "virtue sysdba".

  SQL > select name from v$ instance

  This query should give you, your SID. Its something to return his average your db is in place (you can also use ps - ef ps - ef | grep pmon)

  We must be sure you headset is in place

  It is:

  lsnrctl status SID or lsnrctl (you can also use ps - ef ps - ef | grep lsnr)

  If the listener is until we can say yes db and lsnr is running, so you can miss out on demand

  2)

  Su applvis

  I guess you already file env source

  / D01/Oracle/screws/inst/Apps/VIS_oracle/admin/scripts

  ./adstpall.sh applvis/applvis

  This is improper use. Please essayer./adstpall.sh apps/applications

  >

  adstrtal.sh: the base connection could not be established. The database is out of service or applications provided credentials are wrong.

  USE: adstrtal.sh

  adstrtal.sh: leave with the State 1

  Also, is there a way I can give all users permission in the /d01 directory, to avoid problems like these.

  You can give /d01 777 its okey, but under /d01 r12 folder structure you should give applvis user for the application folder's permissions related, you must give permission for the related database file oravis (you can use chown-r applvis:dba/d01/inst etc...)

  Respect of
  HELIOS

• adstrtal.sh exit with status 4 and insufficient clues 150

  Hello
  
  I have a few questions
  
  (1) I installed R12.1.1 and after installation, I started database listener, database layer and the application with the start-up of the scripts but adstrtal.sh came out with status 4 and some clues for dating status 150. How can I proceed with this failure. Can someone of you guide me
  (2) what is the location to see the log files of all the scripts I ran (the two databases and application tier) and what is the command I give to check the State of the application tier and the database level shell scripts.
  (3) my computer is a laptop. Is that whenever I close the machine, I need to stop the services starting with applications and database before I stop the machine.
  (4) I was able to browse the linux front-end applications but not XP when I browse the URL. How can I use the services of XP?

  Hello

  See the TechNote MOS:
  * adapcctl.sh: exit with status 150 [1106795.1 ID] *.

  Thank you
  A H E E R X

• After the vista update, the file came out: \boot \BCD with status 0xc000000f. window cannot start and no response my installation dvd

  Last week I've updated in my vista once it was released the file: \boot \BCD with status 0xc000000f. I put my recovery disk window answered, is not obtained in the boot, press F8 did so. I considered that my hard drive was broken, so I changed the hard drive, but it can in installation but couldn't fix it and no driver may be dependent. What can I do? I did all thishttp://support.microsoft.com/kb/927391 step, still does not work. Help, please.

  I think you should contact the manufacturer about this problem with the Bios...

  It is usually F2 or delete to enter the Bios / configuration at startup.

  See you soon.

  Mick Murphy - Microsoft partner

• ORA-27300: OS dependent operating system: CreateThread failed with status: 8

  Hi all

  I'm looking for information on the guide follow error

  ORA-27300: OS dependent operating system: CreateThread failed with status: 8

  ORA-27301: OS Error Message: not enough memory is available to process this command.

  ORA-27302: an error occurred at: ssthrddcr

  Thank you
  Waqas

  Please don't be crazy on me, but in my opinion, this is the wrong place for your question. The fact is that Toshiba doesn't support Windows 2003 server for mobile computing. If you have problems try again with Microsoft.
  As a manufacturer of operating system, they should be able to offer an explanation for each error message. Sorry, but I see no connection between the problems described and Toshiba as a hardware manufacturer.

• Can't do dmg file in the folder - "operation failed with status 1"

  I have a 1 TB hard that often went around. There are some personal files here although I am trying lock creating a DMG using disk utility and turning on encryption. However, whenever I try to do that, I always get an error code - status 1 to be exact. Note that it only does on some records. I had about 15 cases work this way with success, but I get this error a LOT... probably about 40% of the time. "Whenever I try too search ' operation failed with status 1," nothing appears! So frustrating! Any help at all is greatly appreciated! Please see the photos to see more. Thank you! Information... Files in JPEG areinformation1st picture2nd photophoto 3

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Unable to zoom in or out with the trackpad on macbookpro 17 "

  Firefox 4.0 unable to zoom in or out with the trackpad on macbookpro 17 "

  Some actions have been removed in Firefox 4.

  You can restore the zoom feature by changing the related values of downtown on the topic: config page.

  browser.gesture.pinch.in cmd_fullZoomReduce
  browser.gesture.pinch.in.shift cmd_fullZoomReset
  browser.gesture.pinch.out cmd_fullZoomEnlarge
  browser.gesture.pinch.out.shift cmd_fullZoomReset
  

  • http://KB.mozillazine.org/about%3Aconfig

• Zoom in - out with touchpad lapotp

  In startup mode (tile), I can zoom out by clicking the bottom right minimize icon. So I can activate the touchpad (HP Folio 9470 m) and Zoom in and out the tiles. But I can't zoom out with the touchpad when I am in normal mode, I have to activat zoom by clicking zoom out with the key minise. Anyway that I can activate the zoom back fucntion using the touchpad?

  I don't know if there is a way to activate the semantic Zoom with just the touchpad, but Ctrl + mouse scroll wheel: is an alternative to clicking on the icon.

• all my prints are coming out with the word 'project '.

  I use an iMac with Mac OS 10.6 (snow leopard).

  I to printers connected by wi - fi: Office Jet Pro 8500 has more and LaseJet CP1525nw color.

  With the 8500 has more each impression is correct.

  But with the CP1525nw, each print comes out with the word 'PROJECT', no matter the settings (the option "watermark" is already 'OFF' on the print settings, etc.).

  This happens not only with the microsoft office for Mac (Word or Excel), but all prints (for example, work online with my bank account, if I chose to print a statement, he will come out with the word "PROJECT". Even if I save it in PDF format and open the PDF file using the preview or any other PDF reader, it always come out with the word "PROJECT").

  How can I solve this problem?

  Hello again,
  I just ran across this interesting link that another user had the same problem and was able to resolve with an update. The first link below is where you can get updates for your printer. The second is the other thread. Check below and good luck!

  http://goo.GL/rVCXh

  http://goo.GL/0vJxc

• Error - c000021a {fatal system error} the Windows logon system process ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000), not able to start the computer.

  Original title: computer will not open a session.

  c000021a {fatal system error} the windows logon process prosses systewm ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000).

  Hi macduf123,

  You did it all change hardware or software on your machine before this problem?

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe.

  You can follow this link and check if you are able to start correctly on the desktop.

  How to solve an error "STOP 0xC000021A.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• STOP: c000021a {fatal system error} the initial session process or system ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c). The system has been shut down

  I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.

  I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.
  What about Otto
  Windows vista Home basic

  Hello

  Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  =========

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  
  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
  repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
  discs of the machine system good cheap that you already own windows (you will need to reinstall
  If necessary). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Out with the old WinXP box in with Win 7 - recognition problems 2008 Server box

  Our box office WinXP was finally cut off (the last, all the others are Win 7).  I built a new area of Win 7/64 with Windows 7 Professional.  I was able to transfer all the old stuff from WinXP on the server by using the parameters of conduct transfer agent.

  I plugged the new Win 7 box and everything works fine.  However, I can't get our Win 2008 Server to recognize the new box.  User dave is there but the server does not see the new box.

  Q: should I remove user "dave", and then reinstall a new "dave" at the server level?  Seems that I would lose settings, etc. like this.

  I've been going through Hester and Henley on Admin book, but nothing comes out with me.

  If you have configured Active Directory, then you should be able to join your domain from the Windows 7 machine as you would for Windows XP. Please note that you may experience problems if your Local network connection is firewall, as well as temporarily disable and try again.

  http://www.notebooks.com/2009/11/11/quick-look-Windows-7-in-the-workplace-joining-a-domain/

• adoafmctl.sh: exit with status 204

  R12.1.3 on RH Linux 5.10.

  Just cloned this environment and thought, that everything was fine, but don't remember ever having this problem before.

  From OPMN managed Association OC4J instance...

  adoafmctl.sh: exit with status 204

  ---------------------------------+--------------------+---------+---------

  IAS-component | process type.     The NEST | status

  ---------------------------------+--------------------+---------+---------

  OC4JGroup:default_group | OC4J:OAFM |     N/A | Down

  OC4JGroup:default_group | OC4J:forms |   30195 | Alive

  OC4JGroup:default_group | OC4J:oacore |   30042 | Alive

  HTTP_Server | HTTP_Server |   29982 | Alive

  I can connect and if I wasn't paying attention, I'm not sure I would have noticed this failure at startup.

  I stop, deleted the files in $INST_TOP/ora/10.1.3/j2ee/forms/persistence/* (with 1 other directories) and autoconfig running without error.

  -Check the adoafmctl log

  VI $LOG_HOME/appl/admin/log/adoafmctl.txt

  07/05/11-15: 53:17: adoafmctl.sh: Startup managed OPMN Association OC4J instance

  opmnctl: from opmn managed the process...

  --------------------------------------------------------------------------------

  IAS-component/process-type/process-set:

  default_group/oafm/default_group.

  Error

  -> Process (index = 1, uid = 1803696026, pid = 0)

  no ports available from the port range

  Cannot start a process managed after the attempt limit maximum

  no ports available from the port range

  no ports available from the port range

  Journal:

  None

  07/05/11-15: 53:17: adoafmctl.sh: exit with status 204

  ================================================================================

  VI $LOG_HOME/ora/10.1.3/opmn/opmn.log

  15/05/07 11:53:17 [pm-process] departure: default_group ~ oafm ~ default_group ~ 1 (1803696026:0)

  15/05/07 11:53:17 [libopmnoc4j] try to get port type: rmi failed for an OC4J process

  15/05/07 11:53:17 [libopmnoc4j] try to get ports for proc: 1803696026 failed

  So now I just need a little help in how to solve it.

  Hello

  Have you checked the following document:

  After competitor Manager Started, oc4j Startup Script failed for no port available process oc4j (Doc ID 1913738.1)

  Check also the ports used by oc4j to see if another process is using.

  netstat - a | grep

  Kind regards

  Bashar

• help me out with a query with an output that has own text.

  help me out with a query with an output that has own text.

  For example select name from tbl_name

  Ben "is my name"-> should be the output

  Hello

  3cc59f7b-B8C1-4EFA-8385-e0d8720a689c wrote:

  help me out with a query with an output that has own text.

  For example select name from tbl_name

  Ben "is my name"---> should be the output

  Sorry, it is not clear what you want.

  If the table contains only "Ben", then you can get the output above using a query like this:

  SELECT name. '' my name is' ' AS name_plus

  FROM tbl_name;

  I hope that answers your question.

  If this isn't the case, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements), and the results you want from this data.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002#9362002