adstrtal.sh exit with status 4 and insufficient clues 150
HelloI have a few questions
(1) I installed R12.1.1 and after installation, I started database listener, database layer and the application with the start-up of the scripts but adstrtal.sh came out with status 4 and some clues for dating status 150. How can I proceed with this failure. Can someone of you guide me
(2) what is the location to see the log files of all the scripts I ran (the two databases and application tier) and what is the command I give to check the State of the application tier and the database level shell scripts.
(3) my computer is a laptop. Is that whenever I close the machine, I need to stop the services starting with applications and database before I stop the machine.
(4) I was able to browse the linux front-end applications but not XP when I browse the URL. How can I use the services of XP?
Hello
See the TechNote MOS:
* adapcctl.sh: exit with status 150 [1106795.1 ID] *.
Thank you
A H E E R X
Tags: Oracle Applications
Similar Questions
-
adopmnctl.sh: exit with status 2
Hi all
So this weekend I cloned a new instance. Everything went correctly. No errors and all.
But I have problem with the OPMN.
Whenever I try to start the application or the OPMN (adstrtal.sh apps / < apps_pwd > - adopmnctl.sh start), I get the following error:
-adopmnctl.sh: exit with status 2.
Looking at the log file does not give much information alongside the same error code
-adopmnctl.sh: exit with status 2.
I looked at the perl adcfgclone.pl appsTier log file and there is no errors. Eventho not, at the end of the cfgclone, it starts applications. It seems that he failed during this phase too.
Could someone make me notice to certain documents? It would be greatly appreciated.
Thank you
FelixHi Felix,.
Please check the IP address in the hosts file.
Kind regards
Hussein -
adoafmctl.sh: exit with status 204
R12.1.3 on RH Linux 5.10.
Just cloned this environment and thought, that everything was fine, but don't remember ever having this problem before.
From OPMN managed Association OC4J instance...
adoafmctl.sh: exit with status 204
---------------------------------+--------------------+---------+---------
IAS-component | process type. The NEST | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group | OC4J:OAFM | N/A | Down
OC4JGroup:default_group | OC4J:forms | 30195 | Alive
OC4JGroup:default_group | OC4J:oacore | 30042 | Alive
HTTP_Server | HTTP_Server | 29982 | Alive
I can connect and if I wasn't paying attention, I'm not sure I would have noticed this failure at startup.
I stop, deleted the files in $INST_TOP/ora/10.1.3/j2ee/forms/persistence/* (with 1 other directories) and autoconfig running without error.
-Check the adoafmctl log
VI $LOG_HOME/appl/admin/log/adoafmctl.txt
07/05/11-15: 53:17: adoafmctl.sh: Startup managed OPMN Association OC4J instance
opmnctl: from opmn managed the process...
--------------------------------------------------------------------------------
IAS-component/process-type/process-set:
default_group/oafm/default_group.
Error
-> Process (index = 1, uid = 1803696026, pid = 0)
no ports available from the port range
Cannot start a process managed after the attempt limit maximum
no ports available from the port range
no ports available from the port range
Journal:
None
07/05/11-15: 53:17: adoafmctl.sh: exit with status 204
================================================================================
VI $LOG_HOME/ora/10.1.3/opmn/opmn.log
15/05/07 11:53:17 [pm-process] departure: default_group ~ oafm ~ default_group ~ 1 (1803696026:0)
15/05/07 11:53:17 [libopmnoc4j] try to get port type: rmi failed for an OC4J process
15/05/07 11:53:17 [libopmnoc4j] try to get ports for proc: 1803696026 failed
So now I just need a little help in how to solve it.
Hello
Have you checked the following document:
After competitor Manager Started, oc4j Startup Script failed for no port available process oc4j (Doc ID 1913738.1)
Check also the ports used by oc4j to see if another process is using.
netstat - a | grep
Kind regards
Bashar
-
startup of the database: exit with status 9
Hello experts,
like an oracle DBA I could have solved this problem as my owm, but as it is in oracle applications, I don't want to take any chance... I use oracle apps R12 on RHEL 5.2 ACE. uptill now everything was fine, but as I try to clone my database and stop my level for cloning database, it is not upward since then.
I run preclone utility to copy the database to the target computer layer, and after copying all levels (database and applications), I try to restart the database that gives me following error...
When I checked for the log file, it says that ORA-12701: create the character of the data set is not known[oracle@appsserver PROD_appsserver]$ sh addbctl.sh start PROd You are running addbctl.sh version 120.1 Starting the database PROD ... SQL*Plus: Release 10.2.0.2.0 - Production on Tue May 19 22:58:41 2009 Copyright (c) 1982, 2005, Oracle. All Rights Reserved. Connected to an idle instance. ORACLE instance started. Total System Global Area 1073741824 bytes Fixed Size 1264892 bytes Variable Size 427819780 bytes Database Buffers 633339904 bytes Redo Buffers 11317248 bytes Database mounted. ORA-01092: ORACLE instance terminated. Disconnection forced Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production With the Partitioning, OLAP and Data Mining options addbctl.sh: exiting with status 9
I also have ckecked /oracle/PROD/db/tech_st/10.2.0/admin/PROD_appsserver/udump/prod_ora_6272.trc file specified in the alert log file and it saysparallel recovery started with 2 processes Tue May 19 22:52:39 2009 Started redo scan Tue May 19 22:52:39 2009 Completed redo scan 65 redo blocks read, 4 data blocks need recovery Tue May 19 22:52:39 2009 Started redo application at Thread 1: logseq 38, block 2, scn 5965098618544 Tue May 19 22:52:39 2009 Recovery of Online Redo Log: Thread 1 Group 1 Seq 38 Reading mem 0 Mem# 0 errs 0: /oracle/PROD/db/apps_st/data/log01a.dbf Mem# 1 errs 0: /oracle/PROD/db/apps_st/data/log01b.dbf Tue May 19 22:52:39 2009 Completed redo application Tue May 19 22:52:39 2009 Completed crash recovery at Thread 1: logseq 38, block 67, scn 5965098638596 4 data blocks read, 4 data blocks written, 65 redo blocks read Tue May 19 22:52:40 2009 Thread 1 advanced to log sequence 39 Thread 1 opened at log sequence 39 Current log# 2 seq# 39 mem# 0: /oracle/PROD/db/apps_st/data/log02a.dbf Current log# 2 seq# 39 mem# 1: /oracle/PROD/db/apps_st/data/log02b.dbf Successful open of redo thread 1 Tue May 19 22:52:40 2009 MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set Tue May 19 22:52:40 2009 SMON: enabling cache recovery Tue May 19 22:52:41 2009 Incremental checkpoint up to RBA [0x27.3.0], current log tail at RBA [0x27.3.0] Tue May 19 22:52:44 2009 Successfully onlined Undo Tablespace 368. Tue May 19 22:52:44 2009 SMON: enabling tx recovery Tue May 19 22:52:44 2009 Errors in file */oracle/PROD/db/tech_st/10.2.0/admin/PROD_appsserver/udump/prod_ora_6272.trc:* ORA-12701: CREATE DATABASE character set is not known Tue May 19 22:52:44 2009 Error 12701 happened during db open, shutting down database USER: terminating instance due to error 12701 Instance terminated by USER, pid = 6272 ORA-1092 signalled during: ALTER DATABASE OPEN...
What could be the problem? I am trying to open my apps from source as target is located on the same machine, I applied the following hotfixes:Dump file /oracle/PROD/db/tech_st/10.2.0/admin/PROD_appsserver/udump/prod_ora_6272.trc Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production With the Partitioning, OLAP and Data Mining options ORACLE_HOME = /oracle/PROD/db/tech_st/10.2.0 System name: Linux Node name: appsserver.microproindia.com Release: 2.6.18-92.el5 Version: #1 SMP Tue Apr 29 13:16:12 EDT 2008 Machine: i686 Instance name: PROD Redo thread mounted by this instance: 1 Oracle process number: 13 Unix process pid: 6272, image: [email protected] (TNS V1-V3) *** SERVICE NAME:() 2009-05-19 22:52:39.264 *** SESSION ID:(389.3) 2009-05-19 22:52:39.264 Successfully allocated 2 recovery slaves Using 543 overflow buffers per recovery slave Thread 1 checkpoint: logseq 38, block 2, scn 5965098618544 on-disk rba: logseq 37, block 3, scn 5965098598491 start recovery at logseq 38, block 2, scn 5965098618544 *** 2009-05-19 22:52:39.555 Started resilvering redo thread 1 seq 38: blocks 2-66 *** 2009-05-19 22:52:39.586 Completed resilvering redo thread 1 seq 38 ----- Redo read statistics for thread 1 ----- Read rate (ASYNC): 32Kb in 0.26s => 0.12 Mb/sec Total physical reads: 4096Kb Longest record: 0Kb, moves: 0/86 (0%) Longest LWN: 12Kb, moves: 0/7 (0%), moved: 0Mb Last redo scn: 0x056c.db958ee3 (5965098618595) ---------------------------------------------- ----- Recovery Hash Table Statistics --------- Hash table buckets = 32768 Longest hash chain = 1 Average hash chain = 4/4 = 1.0 Max compares per lookup = 1 Avg compares per lookup = 165/169 = 1.0 ---------------------------------------------- *** 2009-05-19 22:52:39.623 KCRA: start recovery claims for 4 data blocks *** 2009-05-19 22:52:39.678 KCRA: blocks processed = 4/4, claimed = 4, eliminated = 0 *** 2009-05-19 22:52:39.679 Recovery of Online Redo Log: Thread 1 Group 1 Seq 38 Reading mem 0 ----- Recovery Hash Table Statistics --------- Hash table buckets = 32768 Longest hash chain = 1 Average hash chain = 4/4 = 1.0 Max compares per lookup = 1 Avg compares per lookup = 169/169 = 1.0 ---------------------------------------------- ORA-12701: CREATE DATABASE character set is not known
1 DELTA 6
2 RUP6
3 R12. T2K. A.Delta.6 Techstack R12. T2K. For the autoconfig consilidate patch
as mentioned in metalink Doc-id 387859.1 ...
any sugestion will be highly appreciated
Thanks and greetings
VD
3.Hello
Can you check the following to note and see it helps.
Errors at the start of the database: ' ORA-01092: ORACLE terminated instance. Forced logoff"and" "ORA-12701: CREATE DATABASE character set is not known".
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=553264.1
-
Impossible to start an Instance of R12 adstrtal.sh out with status 1
Hi - I am unable to restart my server R12 properly off.
1)
I seem to have the database and listener of the database to the top with its respective scripts.
/D01/Oracle/vis/DB/tech_st/11.1.0/appsutil/scripts/VIS_oracle
Su oravis
(a) Demarrer./addbctl.sh
(b) debut./addlnctl.sh VIS_oracle
But I can't script the application is running.
2)
Su applvis
/ D01/Oracle/screws/inst/Apps/VIS_oracle/admin/scripts
./adstrtal.sh applvis/applvis
adstrtal.sh: the base connection could not be established. The database is out of service or applications provided credentials are wrong.
USE: adstrtal.sh < appsusername/appspassword >
adstrtal.sh: leave with the State 1
Now, I checked the applvis password is just because I changed under system-> Administration-> user groups
The guide I followed especially for my installation directory is the following:
http://eyeonapps.Gendron.ca/?p=12
3)
Now, I read somewhere it is possible with the environment file not native, but where this file, I saw a couple of places, also under what user should I source calling it?
Also, is there a way I can give all users permission in the /d01 directory, to avoid problems like these.
Would appreciate the help to get the application running server.
Thank you!Hi user;
I seem to have the database and listener of the database to the top with its respective scripts.
/D01/Oracle/vis/DB/tech_st/11.1.0/appsutil/scripts/VIS_oracle
Su oravis
(a) Demarrer./addbctl.sh
(b) debut./addlnctl.sh VIS_oraclePlease log on as oravis and source EPS file, and then it comes:
sqlplus "virtue sysdba".
SQL > select name from v$ instance
This query should give you, your SID. Its something to return his average your db is in place (you can also use ps - ef ps - ef | grep pmon)
We must be sure you headset is in place
It is:
lsnrctl status SID or lsnrctl (you can also use ps - ef ps - ef | grep lsnr)
If the listener is until we can say yes db and lsnr is running, so you can miss out on demand
2)
Su applvis
I guess you already file env source
/ D01/Oracle/screws/inst/Apps/VIS_oracle/admin/scripts
./adstpall.sh applvis/applvis
This is improper use. Please essayer./adstpall.sh apps/applications
>
adstrtal.sh: the base connection could not be established. The database is out of service or applications provided credentials are wrong.
USE: adstrtal.sh
adstrtal.sh: leave with the State 1
Also, is there a way I can give all users permission in the /d01 directory, to avoid problems like these.
You can give /d01 777 its okey, but under /d01 r12 folder structure you should give applvis user for the application folder's permissions related, you must give permission for the related database file oravis (you can use chown-r applvis:dba/d01/inst etc...)
Respect of
HELIOS -
adformsctl.sh: exit with status 204
Hello
PROD
R12
AIX 5.2
Forms Services does not open. As I have already made to remove under the action plan, but the question is the same. Please suggest me.
RM - fr $INST_TOP/ora/10.1.3/j2ee/oacore/persistence/*
RM - fr $INST_TOP/ora/10.1.3/j2ee/oafm/persistence/*
RM - fr $INST_TOP/ora/10.1.3/j2ee/forms/persistence/*
FYI I haven't run autoconfig
Thank youYou can find errors in the database log file?
Please see if (connections E JDBC - Business Suite Application Tier fail with "java.sql.SQLException: IO exception: there is no process to read data written to a pipe.") [REF 734293.1]) help.
Automatic configuration service is running
Update the thread once it's done.
Thank you
Hussein -
adalnctl.sh out with status 1
Hello
I just finished to install EBS VISION demo instance.
But I can't start: adalnctl.sh
The database is running:
[oracle@ebs122 VIS_ebs122] $ /d01/oracle/db/VIS/11.2.0/appsutil/scripts/VIS_ebs122/addlnctl.sh start to SCREW
Logfile: /d01/oracle/db/VIS/11.2.0/appsutil/log/VIS_ebs122/addlnctl.txt
You are running version 120,4 addlnctl.sh
Listener process LIVE starting...
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 2 June 2015 10:00:22
Copyright (c) 1991, 2011, Oracle. All rights reserved.
From /d01/oracle/db/VIS/11.2.0/bin/tnslsnr: Please wait...
TNSLSNR for Linux: Version 11.2.0.3.0 - Production
System settings file is /d01/oracle/db/VIS/11.2.0/network/admin/VIS_ebs122/listener.ora
Log messages written to /d01/oracle/db/VIS/11.2.0/admin/VIS_ebs122/diag/tnslsnr/ebs122/vis/alert/log.xml
Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=ebs122.ebsdomain) (PORT = 1521)))
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=ebs122.ebsdomain) (PORT = 1521)))
STATUS of the LISTENER
------------------------
Alias of SCREWS
Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start date June 2, 2015 10:00:28
Uptime 0 days 0 h 0 min 15 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /d01/oracle/db/VIS/11.2.0/network/admin/VIS_ebs122/listener.ora file
The listener log file /D01/Oracle/DB/vis/11.2.0/Admin/VIS_ebs122/diag/tnslsnr/ebs122/vis/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=ebs122.ebsdomain) (PORT = 1521)))
Summary of services...
Service 'SCREW' has 1 instance (s).
Instance of "SCREW", status UNKNOWN, has 1 operation for this service...
The command completed successfully
addlnctl.sh: exit with status 0
The journal of automatic configuration is Ok: "AutoConfig exited with status 0.
I have attached the log of the listener and the journal of automatic configuration.
What could be wrong?
Thank you.
Can you post the contents of $ORACLE_HOME/network/admin/listener.ora
U can also try to start the listener as below and let us know the result:
-l' source applications environment
-lsnrctl start APPS_VIS
Or
-demarrage./adalnctl.sh
-
adopmnctl.sh out with status 2
Hello
I am new to Oracle Apps and could successfully install R12 with the help of the tutorial to some < site >.
After the installation, intended to take the system snapshot to restore because I won't go well again the installation which took almost 2 weeks for me :(
System backup is not successful and recommended to run CHKDSK
I have not stopped all treatment Apps and rebooted the machine to run CHKDSK. He finds some bad cluster and that fixed it.
I started VMWare and R12. From that moment, get 'adopmnctl.sh out with status 2' and other dependent applications and on that same State during the d'apps/apps./adstrtal.sh command
I found the solution in someother post fortunately located under the solution that worked for someone else. I don't have access to Metalink and want to have solutions in these notes to solve the problem on my machine.
******************************************************
DB-Tier Autoconfig errors ORA - 12705: cannot access NLS files or invalid environment specified [548916.1 ID]
ORA-12705: cannot access NLS data or invalid environment files specified, running Autoconfig [ID 561422.1]
AutoConfig fails on the database layer [ID 470254.1]
******************************************************
Where can I find notes above for solve the problem? Someone even kind of measures to solve the problem for users like me?
Note: There is no erros after the execution of automatic configuration for DB and Apps. No problems with the host file also.
Thank you
SrinivasYou need to start debugging further from this work and I need your help to solve this problem.
Check the files for more information on this error in Apache logs.
You are now all operational services?
Thank you
Hussein -
Last week I've updated in my vista once it was released the file: \boot \BCD with status 0xc000000f. I put my recovery disk window answered, is not obtained in the boot, press F8 did so. I considered that my hard drive was broken, so I changed the hard drive, but it can in installation but couldn't fix it and no driver may be dependent. What can I do? I did all thishttp://support.microsoft.com/kb/927391 step, still does not work. Help, please.
I think you should contact the manufacturer about this problem with the Bios...
It is usually F2 or delete to enter the Bios / configuration at startup.
See you soon.
Mick Murphy - Microsoft partner
-
Export 6 channel discreet mono tracks (5.1 mix) I have only 2 tracks with audio compressed and 4 empty trace on my exit. I use first Pro CC14, pasted below export settings and sequence settings. Please help export feature for iTunes version trailer next week. Ouch!
So, I'm bad to think 5.1 sequence option is what you wanted. I'm sorry. You want to separate the 6 channels. Then with your initial configuration, your Audio Track mixing table appears as the posted screenshot?
-
Dynamically call DBMS_XMLINDEX to delete the setting and exit with the exception
Hi all
I am trying to create a procedure to dynamically call DBMS_XMLINDEX.dropparameter.
If the parameter doesn't exist no then gracefully exit with the exception as "the parameter does not exist.
But I keep getting errors because of the dynamic passing.
Procedure is something like:
Create PROCEDURE drop_parameter (p_parameter IN VARCHAR2)
IS
no_parameter EXCEPTION;
PRAGMA EXCEPTION_INIT(no_parameter,-12004);
BEGIN
RUN IMMEDIATELY ' DBMS_XMLINDEX.dropparameter ("| p_parameter |") ';
dbms_output.put_line ('abandoned parameter');
EXCEPTION
WHEN no_parameter THEN
dbms_output.put_line ('parameter does not exist');
END drop_parameter;
For the implementation we can try to create the parameter in the form:
BEGIN
DBMS_XMLINDEX. () REGISTERPARAMETER
'Param1 ',.
' PATH TABLE PathTB1
Paths (INCLUDE (/ a/b / c))
/ d/e/f
))
');
END;
/
The setting above should be deleted or if not existing, then exit gracefully.
Please suggest.
Thank you...You test the incorrect error code...
ORA-12004: http://docs.oracle.com/cd/E11882_01/server.112/e17766/e9858.htm#sthref3299
Try with ORA-44737, for example:
SQL> set serveroutput on SQL> SQL> BEGIN 2 DBMS_XMLINDEX.REGISTERPARAMETER ( 3 'Param1', 'PATH TABLE PathTB1 PATHS (INCLUDE ( /a/b/c /d/e/f ))'); 4 END; 5 / PL/SQL procedure successfully completed SQL> SQL> CREATE PROCEDURE drop_parameter(p_parameter IN VARCHAR2) 2 IS 3 no_parameter EXCEPTION; 4 PRAGMA EXCEPTION_INIT(no_parameter,-44737); 5 BEGIN 6 DBMS_XMLINDEX.dropparameter(p_parameter); 7 dbms_output.put_line('Parameter dropped'); 8 EXCEPTION 9 WHEN no_parameter THEN 10 dbms_output.put_line('Parameter does not exist'); 11 END; 12 / Procedure created SQL> exec drop_parameter('Param1'); Parameter dropped PL/SQL procedure successfully completed SQL> exec drop_parameter('Param1'); Parameter does not exist PL/SQL procedure successfully completed
(and even once, you do not need code dynamics)
-
We bought a new laptop and 13 items today. We spent the day trying to get it set up. We tried to download the 13 items at least 6 times. Whenever it took about 45 minutes to download, but when we open the file and click on set up it says that there was a problem with the download and it recommends that stop, restart and download it again? How we work what goes wrong? We had to remove the files and start every time. I don't have another day to try to get this sort. Should not it is just a matter of downloading and then, should not come with a message to install and we just press Yes and it works.
You can also download the trial version of the software directly (No Download Manager) through the page linked below and then use your current serial number to activate it. You should get two files, an executable file and a compressed file. Run the executable file and it will install the rest.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
-
OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.
I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8). Mind you, that's all that's changed. It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.
After the new kernel and reboot, I had to rebuild vmmod. I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d. Update like a champion.
Try to turn on a VM and Ihanta!, the above error.
Nothing else was changed.
I tried the upgrade to VMware Server 1.08. Used all-new any117d - update OK.
Error again.
I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.
Error again.
status of /etc/init.d/VMware
Networking networking on/dev/vmnet0 is running
Invited only on/dev/vmnet1 network is running
Network invited only on/dev/vmnet8 is running
NAT networking on/dev/vmnet8 is running
Responsible vmmon module
Loaded module Vmnet
FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.
What now?
I'm in the same boat. Fedora 8 2.6.26.8 - 57.fc8 #1 SMP
I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d. 117D compiles with every version of server but when I try to turn on a virtual computer I get this error.
Cannot change the power state of virtual machine: the process has exited with an error:
vmxvmdb: name of the Index generated by the configuration file
POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.
You have a bad version of the module kernel "vmmon.
Try reinstalling VMware Server.
POST (no connection): failed to initialize the surveillance apparatus.
Failed to initialize the virtual machine.
End of the error message.
I found several posts other people have this problem but
they are months with no recent activity and nothing that solved the problem. I found appeared
to get a fix, one updated the all an update that corrects the problem for
2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead. Here is the link to the discussion
http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2
Of course, I would like to know how to solve this problem as well.
Thank you
-
Report with the box and collection
Hi all
I need to manage an interactive filtering report and select rows of boxes and then use a collection to manage the selected records.
I used a first collection to create the record source by a process of front-Header we charge:
DECLARE
v_id NUMBER;
Varchar2 (8) var1;
Varchar2 (10) var2;
var3 VARCHAR2 (50);
var4 VARCHAR2 (10);
VAR5 VARCHAR2 (100);
var6 VARCHAR2 (5);
cursor c_Populate is
SELECT
DEP.chassis_code AS chassis_code,
DEP.model_code AS model_code,
m.model_description AS model_description,
DEP.acc_doc_number AS acc_doc_number,
dest. Description AS destination_descr,
(trunc (sysdate) - dep.entry_date) Anzianita
OF deposit_chassis dep, warehouses w, warehouse_map card, models m, immersion,.
dest, SDS T_SUB_DESTIN_DEALERS destinations
WHERE
DEP. Status = 5 AND
w.ware_code = map.ware_code AND
DEP. DEALER_CODE = DDD. DELIVERY_POINT AND
DEP. DESTINATION_CODE = DDD. DESTINATION_CODE AND
Map.MAP_CODE = dep.map_code AND
m.model_code = dep.model_code AND
DEP. UNLOADING_SITE = S.SITE_CODE AND
DEP.destination_code = dest.destination_code and
DEP.unloading_site = 'S0000074' and w.site_code = 'S0000074 ';
I have SEVERAL;
BEGIN
APEX_COLLECTION. CREATE_OR_TRUNCATE_COLLECTION (p_collection_name = > 'MY_COLLECTION');
OPEN c_Populate.
LOOP
EXTRACT c_Populate in var1, var2, var3, var4, var5, var6;
EXIT WHEN c_Populate % NOTFOUND;
APEX_COLLECTION. ADD_MEMBER)
p_collection_name = > 'MY_COLLECTION ',.
p_c001 = > var1.
p_c002 = > var2,.
p_c003 = > var3.
p_c004 = > var4.
p_c005 = > var5,.
p_c006 = > var6);
END LOOP;
CLOSE C_Populate;
END;
-----
Then, I created a region for a SQL report:
SELECT
APEX_ITEM. Chk CheckBox(1,C001).
apex_item. Text (2, c001) maniglie,.
apex_item. Text (3, c002) ModelCode,.
apex_item. Text (4, c003) model.
apex_item. Text (5, c004) all Doc_Number,.
apex_item. Text (6, c005) Destination.
apex_item. Text (7, c006) age
OF APEX_COLLECTIONS
WHERE COLLECTION_NAME = "MY_COLLECTION";
-----
Then, with a "submit" button and the process (below), I need to load a new collection for more details.
How can I get the unique values for each field of my selected rows (see MY_COLLECTION)?
APEX_COLLECTION. CREATE_OR_TRUNCATE_COLLECTION (p_collection_name = > 'COL_AVAILABLE_CHASSIS');
BECAUSE me IN 1.APEX_APPLICATION. G_F01. County
LOOP
APEX_COLLECTION. ADD_MEMBER)
p_collection_name = > 'COL_AVAILABLE_CHASSIS ',.
p_c001 = > I need the maniglie
p_c002 = > I need to the ModelCode
p_c003 = > I need to model
p_c004 = > I need to the Doc_Number
p_c005 = > I need to the Destination
p_c006 = > I need to age
END LOOP;
Thanks in advance,
MassimoHello
This might help
https://Apex.Oracle.com/pls/OTN/f?p=40323:1Kind regards
Jari -
No status bar and send photos to icloud?
I am trying to download my pictures on icloud to free storage on my iphone. I turned on and outside, icloud signed in and out, reset the unit, I forgot network and reconnected, etc.. No status bar appears under "space low disk - uploadong 1 432 pictures» He's right there. Weeks and he always says the same thing. There is no status bar showing me progress at all. Anyone know how to get it to start downloading? Ive AOMI for 50 GB of storage and should still use this bc my phone does nothing. It's just stuck. Please help, completely frustrated with these issues and after several searches online, it seems that this has happened for years with no explanation.
All the photos never reached your iCloud account? If you connect to icloud.com and look at the PHOTOS icon, are there pictures he?
While you may have seen dozens of users saying it happened years, that reality is millions of users don't have this problem at all.
Where you see low disk space message? You optimize pictures enabled in your iCloud library? Truth is, with a low disk space AND Optimize photos turned on, you will have problems downloading 1400 + photos.
Maybe you are looking for
-
I can't change the country since I balance...
I tried the link in his answers to similar questions, but when I go there I don't see the link to billing support. How to change the store or zero balance?
-
MyHP Pavilion p6120f primer, transforms itself constantly power.
Monday, my little brother was playing a game on the computer above and click on the "Sleep" button on the keyboard. There then press random keys and the power button to wake the computer. After it failed in his attempts, he turns off the computer via
-
Questions about Satellite P10 554
Hello I have 2 questions about my P10-554. I read on this forum but can't find anything that helps out me. First of all:When I try to turn the unit off after working, using even the closing of xp function or the power button, windows normally quit, b
-
I know there are some discussions about the speed, namely about HSUPA and a bunch of people ranting about AT & T. I think a lot of DOWNLOAD problems are AT & T issues. BUT. If you look at all speeds, I've still seen NOBODY counts more than 400 kbit/s
-
original title: System Restore problems Hi, I have problems, perform a system restore using windows 7. I get the message: "an unknown error occurred during system restore. (0 x 80070002). any help with this problem would be appreciated. Thank you ver