Adapted from pairing for G57 wireless mouse
Hello
My parents have a desktop PC and a mouse wireless hp G57 P/N 705076-001 model.
I'm looking for a suitable base wireless keyboard HP that can run the same as the mosue bluetooth card to avoid having to use 2 adapters.
Can advise you on all models where this would be possible please?
Thank you very much
Darren
You will need to buy a desktop computer wireless or bluetooth set of mouse and keyboard to avoid having two connected usb dongles.
Factory dongles are coded in the firmware to match the device or devices that they were delivered with. The average homeowner cannot change that.
Tags: HP Desktops
Similar Questions
-
I would add a wireless keyboard to a 'double Receiver USB' for a wireless mouse.
I have successfully installed the small 'Inteli-mouse' (microsoft mobile 6000 wireless mouse) by using the center of update online that I was sent to when I inserted the installation CD. I like the small USB receiver, is it possible to update the driver, so I can also use my "Microsoft Wireless Keyboard 700 V2.0" with this USB receiver? I am running "Windows 7 Home Premium 64 bit on an HP G71 laptop. I like the wireless keyboard because the screen is great & because of some physical problems I can keep the keyboard closer to me and the screen further when the House. It's not important, I wondered? Thank you, KC973
Hi KC973,
Welcome to the Microsoft Answers site!
You will not be able to add a wireless keyboard to a 'double Receiver USB' for a wireless mouse. To use the wireless keyboard, you can use the receiver that came with the key board and the receiver double USB mouse will not recognize the wireless keyboard.
Concerning
Varun j: MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I get a message on my screen of Microsoft IntelliPoint that reads: the wireless mouse battery level is extremely low. Replace the batteries now to keep the operation of the wireless mouse. How to replace or place where the batteries?
This will give you some clues
http://www.ehow.com/how_6763222_replace-battery-Microsoft-mouse.html
-
Can I use any receiver for Microsoft Wireless mouse 3500
I have Microsoft 3500 Wireless mouse, couple weeks back I lost his nano-receiver, can anyone help figure out if I can use any other receiver for her or I have to buy new mouse collect them all?
If you have a receiver to predict the "Microsoft Wireless Mouse 3500" you might be able to connect again - not positive on this one (some Logitech devices can be "trained" to use other receivers).
In general though - if you lose the receiver, that the mouse is golden.
-
How to switch my touchpad mouse for my wireless mouse?
Recently installed my mouse wireless optical 3000 of Microsoft's wireless. It appears in Device Manager, and he says it works fine... but, it will only allow me to use the touchpad mouse. How can I change the wireless mouse?
Hello
What is the brand and model of the laptop?
You can check in the mouse settings touchpad in the application installed on the laptop to change the priority of the Mouse touchpad to an external mouse.
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Adapted from food for a Radeon Graphics Card (for Dell Optiplex 990) 6450
Hello
I would like to install a graphic card Radeon 6450 in my computer Dell Optiplex 990. I already spent a considerable amount of time and money, the upgrade of the PC. However, the power supply plays in my mind a bit and in regard to the graphics card, I ordered for her and the form factor PC that seems to be a form factor small when I get my service in the site tag code, I want to make sure that I have made the right choice of first time.
My system is attached (a 1st) as well as specific photographs of power supply and graphics card.
I was told that I must really be consider a 400 Watt one. Furthermore. I understand that it's difficult to say without physically seeing the piece in question, but is there a standard size wise size that will fit in my case?
If you need more details, please let me know.
Thank you very much
Above is current spec system.
Here are pictures of my current diet which I don't put everything (includes connectors - can you tell these if mine is ATX or the type that must be taken into account?):
The graphics (Radeon 6450) which I have bought too soon! ( :| ) :
One of more to come. Also, I think I have the right PCI port on the motherboard. Who is the answer, please be able to confirm if you certainly know I wish it is my board or send me a photo of one. (It is that with the kind of clip on the end of it, the long version thing)? -Sorry for my terminology!
I would say your 709MT 240W power is very good for a 6450 which uses DDR3. Not all current Dells use EPS12v ATX power supplies. You have only 2 slots and the card must be discreet.
http://www.Dell.com/downloads/global/products/Optix/en/OptiPlex-990-tech-guide.PDF
-
Calibration device wireless mouse is disabled
The receiver that I plug into the USB port for my wireless mouse must be taken out and put back in, even waved around to make it work. Once I got to work, he won't select things correctly. I mean, when I select things such as volume, or mute, or to go full screen, I have to have my pointer to the right of what I select. So it's as if my calibration is off on the pointer. She does it with my mouse on the touchpad of my laptop and wireless. It drives me crazy. Help, please.
If the receiver is disconnected, you get the same behavior with just the touchpad? If so, then going to the controller or the driver is damaged. Reinstall the driver for the touchpad would be easier to test.
Another thing you can do (after the pilot has been reinstalled) is to go into Control Panel and disable the touchpad before you plug in the receiver and test the mouse wireless in this way.
If you encounter to shake the receiver to make contact, then the USB port is broken/door to where it does not have the receiver tight (try a different USB port if you have one), or the receiver itself is worn or damaged. Look at the end of the plug of the receiver and see if the external armor is flat and rectangular all around. If this isn't the case, you may be able to straighten using a pair of pliers to nozzles. If the inner part of the socket on the laptop or the receiver is cracked or distorted, then it is defective and must be replaced.
SC Tom
-
When I plug my power supply laptop my wireless mouse doesn't work
Compaq nx9600 and my new supply as so that I plug my wireless mouse stops working disconnect and it works.
Tried to restart with the new offer of spower even
Even tried to return the oval form
Power supply matches the HP still seems the same, same size, same marking even amps watts...
Puzzled?
Looking for the wireless mouse software. Update and who might be your bet.
Contact Compaq.
-
Wireless Mouse scrolling wheell 5000
Right now the wheel scrolls Ahmed smooth. I used the scrolling to "click on" animation. How can I change my movement of scrolling? Thanks for the tips
Christinepge,
Try these workarounds to these links,
-
Can Hiow I install a plugin of the mouse.
A standard USB mouse is supported natively by Windows itself and requires no driver work.
Simply plug waiting for 30 to 45 seconds, and it should work. This should work even for the wireless mouse.
-
I bought a HP Wireless Mouse 3000 x and I have been installed following the instructions in the installation guide and not installed. I joined the HP site and search for the drivers but it asks me the serial number and the product number, the Board of directors where this information is carried the serial number but brings two product numbers, which is? I combine the two numbers alternating with the serial number, the tool tells me that "this product cannot be identified by the serial number only.." Please enter a product number below or change the serial number above "I figure P / N: the tool tells me"this product number is not related with serial number please check your records and make any changes necessary.."then type the number of the SPS that the jury leads me and displays the message above again" So how can I get the product drivers?
Hi lufecuro,
Try this link below. This is the driver for HP Wireless Mouse x 3300 page.
This should work as well for you. Let me know how it goes.
-
Download intellipoint from this site for my 3500 mobile wireless mouse?
I want to download intellipoint to exploit my Magnifier on the 3500 wireless mouse
You can download the Intellipoint software from the link below:
http://www.Microsoft.com/hardware/en-us/p/wireless-mobile-mouse-3500#support
In the link provided click on support and then click on the download button next to "8.2 IntelliPoint 64-bit for Windows 7 (EXE)»
-
Hi, is it possible to connect a wireless mouse for my 820 W4 Iconia Tablet?
Hi, I'm a new Member here and am wondering of there is a possibility to connect a wireless mouse for my 820 W4 Iconia Tablet?
hans0919
It is pretty easy to do, but you need the appropriate adapter cable (I have this: http://www.amazon.ca/Asuxtek%C2%AEMicro-USB-Host-OTG-Cable/dp/B00E8CL09Q/ref=sr_1_2?ie=UTF8&qid=1407... but something similar will work). Plug you it into the USB on the W4 and receiver microphone wireless for the mouse inside and you're good to go. The one drawback is that you can't easily load the W4 during use.
-
My grandmother came to visit me in Belgium and brought her laptop with her. It is Windows 7 and I bought in Ukraine. Thus, she cannot use wireless internet at my place. Troubleshooting scan says there is a problem with the driver for a wireless adapter that is it is not compatible or not supported, something like that. All sound systems are in Russian is not easy for me to explain it. Is it possible to fix this problem or she can't use her laptop to go on the net at all? Thank you!
If it's a driver fault, can go you on another pc to work to manufacturers support web site for the 'Ukraine' pc and see if the wireless drivers are available there. If they are, download the latest compatible drivers for your pc and transfer them to it by a stick of memory from SD or USB and then install them.
This may be due to a setting of your network security wireless, for example, that is your network is set to WPA2 but pc does not support. Check configurations for compatibility with your router wireless sound.
See if anything here help - http://windows.microsoft.com/en-us/windows/setting-wireless-network#1TC=windows-7
At worst, is it not possible to connect via a cable to your router, esp, if is only a visit to sound.
-
where can I get a battery cover for replacement for my wireless 4000 mouse?
My dog ahold got my mouse and chewed the lid upward, where can I buy a cover of battey replacement for my wireless 4000 mouse?
My dog ahold got my mouse and chewed the lid upward, where can I buy a cover of battey replacement for my wireless 4000 mouse?
Hello
Contact support | Microsoft Hardware:
http://www.Microsoft.com/hardware/en-us/support/contact-us
Concerning
Maybe you are looking for
-
3.6 I could easily go into the program to change the internet source that I was connected. With 5, it allows me to open the program I use to do this. I tried to find the download of 3.6 million to change it back and can't find it. I called the manufa
-
Lost on Outlook Express emails
'Cleaning' Outlook Express process (transfer and compact) seems to have deleted about 10 weeks of recent e-mails. How to make a comeback?
-
Listeners in c / c ++ development NDK for BB10
Hi all I would like to know if there is the API for capture/listening in BB10 events, as if a call is made / received. my application should listen and respond. Thanks in advance. Kind regards Kavita
-
HelloI developed a form with two blocks.The first - block of non - database contains the criteria.Database of the other - block-displays the records according to the inserted.Also, there is a button that executes the query criteria.The code of the BU
-
Can not upgrade Lightroom 6, Windows 10
I purchased, downloaded and installed the update of Lightroom 5.7 to 6.0 Lightroom on my Windows laptop, 10. It works well, but it must be updated to the latest version.When I start Lightroom 6.0 and click Help, update, Adobe Update Manager starts, a