Adapter sector X200s break?

Similar Questions

• Adapter sector and battery problem?

  I recently bought an Equium M40X - 149 and when the power adapter is connected to the laptop it does not use its power, it only uses battery power. When I take the battery it uses alternating current. I thought it was strange, because I think he should charge the battery, and the power of the computer.

  I removed the battery and was just running back into the computer on AC power and decided to put the battery and the computer says that he was using AC power but also to charge the battery. However, this lasted a few minutes and returned to the use of the battery, even if it was only 83% charged.

  Could someone help me on this issue.

  See you soon

  Hi Gemma,

  The maintenance of power system is integrated on the motherboard. This allows the notbook control the battery even when the notbook is turned off.

  The symptoms you describe indicate a problem with the power jack, or maybe a touch loose connector AC causing propulsion to misbehave.

  I suggest you contact your Agent of Service Toshiba authorized closest because that will be covered by your warranty. The nearest your Agent details can be found on the Toshiba web site.

  HTH

• Predator X 34-adapter sector

  My X 34 delivered without the power adapter, so I was wondering if someone could provide the plug of the power adapter and is the diameter of the tip and color, so that I can see if it is easily available, or if it is a unique adapter just for X 34.

  Thank you

  Hello

  Here is the part number of the adapter:

• CANON 70 D HAS NO POWER USING THE ADAPTER SECTOR OR 2 DIFFERENT BATTERIES

  I WAS USING THE CAMERA THE DAY BEFORE, I BOUGHT THIS CAMERA IN DECEMBER 2013. I USED THIS CAMERA VERY SLIGHTLY.

  TODAY, I WENT TO DOWNLOAD VIDEO FROM THE CAMERA TO CHANGE IT, BUT THE CAMERA WOULD NOT TURN USING THE A/C ADAPTER. I KNEW THAT NOTHING WAS WRONG WITH THE ADAPTER, BUT I PUT IN 2 DIFFERENT BATTERIES AFTER CHARING, THEM AND STILL NO POWER.

  I HAVE REPEATED TO TRY THE A/C ADAPTER AND BATTERIES. I TRIED TO TAKE THE CARD, THE LENS AND MAKING SURE THAT THERE NOTHING PREVENTS THE CONTACTS FOR THE A/C OR BATTERY.

  I STARTED SEARCHING ONLINE OF THE KNOWN FOR THE CANON 70 D ISSUES, I DIDN'T KNOW ANY SPECIFIC 70 D BUT I FOUND A FEW ISSUES FOR OTHER CAMERAS OF CANON WITH THE SAME QUESTION.

  SOME WERE TOLD TO TAKE THE CARD AND THE LENS AND REPLACE IT WITH ANOTHER GOAL, THEN PLACE THE CARD BACK, AND THEN ADD THE BATTERIES AND THAT WILL FIX THE PROBLEM. IT DOES NOT WORK. ANOTHER VIDEO THAT I FOUND SAID THAT THERE WAS A SCREW LOOSE ON THE CIRCUIT BOARD PRINTED FOR THIS OLDER CANON CAMERA... HIS SCREWS SEEMED TO BE MORE IMPORTANT THAN THE SCREWS THAT THE 70 D A SO IT WILL BE VERY HARD FOR ME TO FIND A SCREW DRIVER THAT SMALL... I HAVE TO GO BUY A KIT. BUT NOT RADIO IM LOOKING AT THE BOTTOM OF MY CAMERA IF TAKE APART WILL WORK, IT SEEMS THAT MY CAMERA BODY COMES OFF AS NOT EASILY THAN VIDEO.

  SO NOW IM STUCK WITH MANY PROJECTS VIDEO IM IN THE MIDDLE OF... BUT NOW I DON'T HAVE A CAMERA... I CAN'T AFFORD TO DO REPAIR, AND I CAN'T AFFORD TO BUY JUST ANOTHER CAMERA AND I'M NOT SURE IF THIS UNIT IS UNDER WARRANTY FROM CANON. I BOUGHT AT B & H PHOTO AND I STILL HAVE THE RECEIPT OF E-MAIL FROM THE PURCHASE.

  https://www.YouTube.com/watch?v=FYlNyZ1IP3s

  HAS ANYONE ELSE HAD THIS PROBLEM WITHT THE CANON 70 D?

  AFTER VIEWING THE VIDEO SHOWING THE SCREW CAME OUT ON THE MOTHERBOARD OF THE PC, NOW I SHAKE MY CAMERA, I THINK I CAN HEAR SOMETHING MOVING INSIDE... BUT IT COULD BE MY IMAGINATION. I'M NOT 100% SURE, I HEAR SOMETHING LOOSE. IT REALLY SUCKS BECAUSE I CAN'T COMPLETE MY PROJECTS AND I'VE FITTED THE CASE OF MONEY THE NEW LENS CAMERA AND PURCHASE HAS RECENTLY...

  IF YOU CAN NOT SAY THAT IT IS THE BATTERIES BECAUSE IM ALSO USING AN A/C ADAPTER. I KNOW HOW TO TURN ON THE CAMERA! IM GETTING NOTHING. NO POWER,

  I NEED HELP.

  I CORRECTED MY OWN QUESTION.

  WHAT WOULD HAVE COST ME HUNDREDS OF DOLLARS BY SENDING IT TO CANON, I MANAGED TO SOLVE THIS PROBLEM AND PERHAPS OTHERS HAVE HAD THE SAME PROBLEM AND THEY MAY HAVE SPENT MONEY UNNECESSARY. I SPENT ONLY $6 AND A FEW CHANGES... ALLOWS CALL HIM $7 TO SOLVE THIS PROBLEM.

  I DON'T HAVE TO DISASSEMBLE THE APPLIANCE BUT AS HE TRIED TO DO, I SAW SOMETHING THAT I SUSPECTED WAS THE QUESTION. I PLAYED A BIT WITH THIS SWITCH OR SOME TYPE OF CENSORSHIP OR LOCK.

  SOMETHING LIKE THIS WAS SO SIMPLE TO SOLVE, BUT COULD HAVE COST ALLOT ME OF MONEY. THE PART IS TOO DELICATE. NOW THAT I'M AWARE OF THIS, I CAN BE MORE CAREFUL, BECAUSE I WAS ALREADY VERY CAREFUL WITH ALL MY CANON... BUT IT WAS SOMETHING I WOULD HAVE NEVER EXPECTED THAT IS THE PROBLEM, I SAW THAT HOLE SOONER BUT NA NOT KNOWING WHAT IT WAS FOR... WHILE I WAS GETTING READY TO TAKE OFF THE BATTERY COVER, I NOTICED SHE HAD A TYPE OF CONNECTOR THAT WOULD GO IN THE HOLE (SQUARE) SO I SIMPLY PUT A PEN IN THE HOLE AND THERE IS A SWITCH OR SOMETHING, I PUT THE SWITCH IN THE CENTER. I PUT THE BATTERY IN THE CAMERA, AND THEN HE CAME.

  https://www.YouTube.com/watch?v=nBmtTQn3RlE

• Satellite U400-13 t - battery won't charge / no indicator the adapter

  The battery may charge only when the laptop is not working. In the systray icon does not display an adapter.

  I can't update the bios because the updater wants to adapter.

  Any ideas?

  Best wishes

  Richard

  > Are there no people support Toshiba lurking here?
  Its community of users to

  > I was surprised that nobody answered
  Well, did you help too other people here in the forum?
  Requires other members also help other people if you are not alone here you know

  > If not, what is the point of this forum?
  You can read this on it:
  + Welcome to the Support Forum of Toshiba, created for customers and fans to share knowledge, solve problems and discuss the technology. Join the discussion, please login or register. +

  Now, I would try to help you:
  > The battery charge only when the laptop is not working. In the systray icon does not display an adapter.

  Is the adapter of this OK?
  Have you tested other adapter sector and batteries?
  I think that this should be the first step here.

• Is there a compatible adapter for the A40?

  I use a satellite pro A40 (2.6 model GHz DVD-ROM) and my power brick just died. I had a quick glance at the section options and accessories on this site and found that there are no adapters for the A40. Is this true? are there any adapters CA / CC for the A40?

  I'll be very upset if he does not exist (as I work at 60% power at the moment)

  Hi Daniel,.

  The adapter sector you need for your A40 is part PA3237E-1ACAnumber.

  I found several UK-web sites listing this item. I would suggest Googling for the part number.

  HTH

• Problem of battery and power adapter - on LINUX with [b] Satellite L10 - 102 [/ b]

  Hello
  However, I installed Linux.I trying from last month.
  I installed and tired some type linux: Mandriva 10.1 OE, Mandriva LE 2005, kurumin and Knoppix 3.8, kurumin 3.0 4, kanotix (last rel.), suse 9.1, kubuntu 4.0...
  I have installed a large number of linux applications: kacpi, toshutils, fnfx, tools, portable mode, some patches to the kernel acpi acpi...
  I met some of the nuclei: 2.6.8 - 11mdk, 2.6.9,2.6.11, 2.6.12...
  However, I can't battery and adapter sector-info-States on linux.
  What can I do?

  Hello

  I'm sorry I don't have an answer for you, but a suggestion:
  go to this page:

  http://newsletter.toshiba-tro.de/main/index.html

  and request a test for this model, perhaps they can give you some comments.

  BR
  Tom

• Satellite Pro L20: battery not charge when the power adapter is connected

  Hello

  all advice appreciated.

  I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

  There are two recent occurrences that coincide with this problem, I try to eliminate:

  1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

  2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

  I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

  I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

  see you soon
  Chris

  First, please check if the other are lit.
  If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

  > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
  If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

  So I really don t see any problems with the charge process.

  Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

• Qosmio G40-126 - need AC adapter after turn on and Hibernate

  I have a Qosmio G40-126. A few weeks back the keboard stopped to light blue. Now if I want to turn on or resumption of hibernation, I have to connect the laptop to the power source, even if the battery is fully charged. After I turn on I can continue on battery but I can't do anything until what I plug to the power supply to turn on. :_|

  Does anyone know how to fix this?

  Hi hqaddoumi,

  Using original Toshiba adapter sector and battery Toshiba or any 3rd party?

  What exactly happens if you try to start Notepad without adapter? It does not start and you get a blank screen or what else?

  In my opinion, it could be a motherboard or a malfunction of the BIOS. In your case, I would try to update the BIOS. You can search for an update of the BIOS on the official website of Toshiba.

• AC adapter / CC has a slight split on the new Toshiba unit

  Hello

  I just got my new Toshiba today. However, I just noticed that on the adapter sector (the end that connects to the laptop) has a slight split inside. This exposes the wires inside.

  What would be the best thing to do at this point?

  Thanks in advance.

  Hello

  Well, I think that the easiest way is to visit your retailer where you bought the laptop and explain to him the situation. Maybe you will immediately get a new. The other possibility is to contact Toshiba service partner in your country and to order the new adapter. If the warranty is valid, you should get this free game.

• Connect to the power adapter 65W

  How to connect to the adapter sector 65? / does not charge my laptop it says that I need to conncet to the AC adapter 65W.

  It simply means that you need to use a charger work, approved, the manufacturer of your laptop.  If you get this message with the adapter plugged into the wall and the laptop, this might mean it has failed and must be replaced.

  "BabyGirl22" wrote in the new message: * e-mail address is removed from the privacy... *

  How to connect to the adapter sector 65? / does not charge my laptop it says that I need to conncet to the AC adapter 65W.

• The IBM Thinkpad T-40 of work with this power adapter: 83: 6339

  One of my friends had an old AC adapter his garage to a true old IBM Thinkpad laying around and gave it to me. The reference number of the AC adapter is 83 H 6339. My wife bought an IBM Thinkpad T-40 who only has the docking station with power but does not connect directly to the laptop. I wanted to know if this old AC adapter would be compatible with the T-40 (2373-72U). I don't want the hook upwards and the chance to spoil anything either, but I can find no record on what types of this adapter is supposed to work with laptops.

  hankinsd, welcome to the forum,

  I would not use it, it's an adapter sector 56W and too 'low '. The T4 series requires an adapter of sector 72W.

  Hope this helps

• Adapter S2440L GXYHH?

  I recently bought 4 DELL S2440L monitors. I bought the first 2 in November 2012 and the next 2 in January 2013. 4 screens, 3 power supplies do not work. I contacted the technical support, they immediately sent me to the turnover. Sales agent wasn't sure if these power supplies would be available for replacement and I would need to wait a few weeks to find out. Can I please get a more definitive answer. Do I need to buy more than 4 monitors? or find replacements? The power supply is model: LiteOn PA-1041-71. Help someone? Please?

  c.Newman,

  24 "models have no number of Dell for Technical Support service will not be able to help you. You must contact the Support of the order and provide the Dell order numbers. They can then install an exchange of parts for you.

  GXYHH Delta AC, 40w, Delta, 12 volt DC adapter
  Cable that attaches from the wall jack to the power adapter =
  5120P Americas
  16583 UK/Ireland
  Italy/Chile 23322
  91949 Switzerland
  Denmark 95095
  K2819 Middle East, Africa
  MJ159 Israel

  Test adapter sector of work on the other three monitors using their own power cord to see that their power cords and the screens themselves are functioning. If Yes, then any support order will have to Exchange is the AC adapter. If they fail, test the work + AC adapter + power cord for work on three monitors.

• Power supply for HP g71 laptop adapter

  Hello. My sister has HP G71 laptop and he had so many questions. She dropped me last night because I'm good with computers. After checking it with so many problems and as a mess of a PC. I thought that it is better to perform a system recovery, all over again. When I went to do recovery it say that the battery is low and the battery was at 99% tells me to plug and the adapter sector is plugged into the wall outlet. seems the cord of the adapter is charging the battery, but the laptop does not recognize that it connected to the wall outlet. even the lights on the front lights is on. so far I have closure to the low a battery out I tried to turn it on with just the cord does not on without the battery in it the adapter cord is in charge the batter but the laptop it itself acknowledges that its plugged on the line, I read that it is not only his cell phone, it's a lot of people have had the same problem with these laptops in any help would be great. because at this point, I can't do a reset on this PC yet.

  I suggest you reset the computer of hard edge. Sometimes these types of problems can be solved in drain completely the power of the PC and then reintroduce.

  To perform a hard reset

  Shut down the computer by going to the menu start and select shut down. (If you have no display, hold the button for 5 seconds)
  Unplug the adapter from the laptop.
  Remove the battery from the bottom of the laptop. There will be a switch/battery eject button.
  Wait at least 1 minute with all sources of power disconnected.
  Reinsert the battery and reconnect the power adapter, and then try to turn on the laptop.

  Let me know how it works for you, and if it solves the problem.

  Thank you
  Sean

• When I turn off my Apple Watch and then turn it on, the face of the watch I changed other randomly

  Every night I turn off the Apple Watch and the next morning turn it on. Recently it chages the Apple face a random and erase one had. I have restore the

  Hello

  If you have not already done so, it can help to upgrade your iPhone and Apple Watch to the latest version of the software, from your iPhone:

  • Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
  • Update the software on your Apple Watch - Apple Support

  Rather than spend your watch every night, you can find more convenient to charge your watch every night, from one day to the next.

  The watch cannot be overcharged, and the battery won't suffer harm of regular refills done every day. The load will automatically stop when the battery is fully charged and will start again if necessary due to the use of the current battery.

  Follow Apple's safety and handling instructions, and note also that:

  • It is not possible to turn the watch off the coast while it is on the charger and connected to the power supply - what is normal.
  • It is also normal to watch, adapter sector and charger become hot when it is connected to the power.

  More information:

  Check your battery and load your Apple Watch - Apple Support

  Keep Apple Watch in acceptable operating temperatures - Apple Support