Adapter WUSB100 won't save a WEP key

Similar Questions

• mx459 won't let me enter the WEP key number, allows only symbols and letters. How to enter numbers?

  mx459 won't let me enter the WEP key number, allows only symbols or letters. How to enter numbers?

  John

  This might help

  Press the SETUP button on the control panel of your printer.
  Using the arrows, select DEVICE SETTINGS, press OK.
  Select local network SETTINGS, then press OK.
  Select Configuration LAN wireless, and then press OK.
  If a message appears, press the WPS button, press STOP to cancel.
  Select STANDARD INSTALLATION in the next screen that appears, and then press OK.
  Select your access point or router, and then press OK.
  Press OK to confirm the access point name.
  Enter your password using the numeric keypad on the right.
  On the screen where you enter your password at the top right of the LCD screen, you should see a: 1. This indicates you are in digital input mode. If you press the asterisk (*) will be fixed: has or uppercase mode, pressing asterisk with tiny switch. To enter a letter in letter mode, you press the digital key to scroll through the available letters. For example: to enter a letter 'c', you press the '2' three times.
  Press OK when finished.
  The LCD will say "Connected", if the password is correct.

• Satellite P20: WEP key does not fit - only 24 characters

  Salvation; on my satellite p20 there is not enough space to enter a wep key of 26 characters (only 24 places) can someone advise how to configure to accept the 26 characters
  Rgds david

  Hi David

  When you enter your password, only 24 points will be displayed. Please enter the set password and save. When you open it again the number of points will be different again. It is a kind of security features and do not show the actual password length.

• Problem: WEP key 13-digit

  I am trying to get my (wpc54g v3) Wireless PCMCIA card I use in my old laptop working on another.  Both are running Windows 2000 SP4, both set up correctly and that you can see their networks.

  The problem is that, on this new machine, I connect to a network that uses a configuration WEP opened with a 13-digit hexadecimal WEP key.  All the WinXP / computers laptops Vista connect properly, asking for the WEP key on trying to connect, and their properties reported as open WEP (no WPA - PSK or one of those).

  However, since it's Win2k, I use the Linksys software to connect, and it only accepts the key WEP 10 or 26 digits.  The end result is easily finds the network, she will not receive any data from the router because it cannot validate.

  I tried:

  1 put the WEP key in the "passphrase" box and leaving it translates into a 64 - bit WEP key

  2 put the WEP key in the "passphrase" box and leaving it translates into a 128 - bit WEP key

  3. put the first 10 digits in the box of 64-bit WEP keys

  4 put the last 10 digits in the box of 64-bit WEP keys

  5 put the 13 figures in the 128-bit WEP key, 0 to end padded box

  5. put the 13-digit in the 128-bit WEP key, 0 padded box initially

  6 export a profile, manually editing with a hex editor to replace all four locations of the WEP keys generated by the 13-digit key that is used by the router, then in important profile

  8 using the WEP key in all other available modes 13-digit (WPA - PSK, etc.)

  So far, none of this has resulted in the NIC authenticate correctly, and the monitor of the package confirms the network card not getting any info from the router.

  The network is a network of schools, so I don't have permission to change the password to a key WEP 10 or 26 digits. If I remember correctly the router is a Netgear router.  I use the v3.1 software available for download on the site, corresponding to the type of adapter that I have.  Briefly tried the v7 software after all this testing, but determined that it was for a different product (a USB adapter, more precisely).

  Any ideas?

  I finally figured it out on my own, so this can be marked as resolved.

  I'm assuming that the 13-digit WEP code was a hexadecimal key because it contained only numbers and letters from A to F.  However, during this dismantlement of its hexadecimal ascii pairs 2-digit values (for example, a = 65, b is 66, 0 = 30, 1 = 31, etc.) I found myself with a 26-digit hexadecimal value that worked.

  Unfortunately the Linksys Setup does not have to enter codes of 26 hexadecimal digits 128-bit WEP encryption as their 13-digit ascii code equivalent, thus the confusion.  I hope that this capacity will be added to future versions, if these cards support continues...

• WEP KEY recovery

  Can anyone tell me if there is a way to recover the WEP key of my WRT54G Router. Bought a new computer laptop adapter and need of key.

  Thanks in advance. Them

  WEP KEY? It is one of the Wireless SETTINGS of the router.

  How to check settings router wireless? click here...

• I restored the computer to an earlier date and now the password windows 7 won't save us.

  I restored my computer to girls at an earlier date, and now the password windows 7 won't save us. She never changed the password before and now we cannot connect. How to do it please help.

  I restored my computer to girls at an earlier date, and now the password windows 7 won't save us. She never changed the password before and now we cannot connect. How to do it please help.

  This means that a different password was in effect at this point, even if your daughter thinks otherwise. There are a lot of options built into Windows to help you out of this situation:

  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (only works if an indicator was created and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

  The most important point would be: run a machine without a spare admin account is about as risky to have a house key. Sooner or later, he is at risk for any number of reasons.

• Why my iCloud won't save my photos

  I bought more storage but iCloud won't save my photos, I have 50 GB of data and its available 49.1 says. I'm afraid that if I restore it I won't lose all my photos and videos.

  What makes you think that iCloud is not back up your photos? If you use iCloud photo library, the photos are "stored" in iCloud, but not in the backup.

  Go to settings > general > storage & use iCloud > iCloud > storage management > your device. You see pictures in the backup?

  iCloud: overview of backup and storage iCloud

  The backup of your iPhone, iPad and iPod touch - Apple Support

• Firefox won't save, preferences, passwords, bookmarks, or bookmarks & imported settings of Safari.

  Firefox won't save bookmarks, passwords or preferences. He also won't save Favorites and imported settings of Safari. I tried the suggestions of help, but nothing seems to work. All the settings seem to be correct. I reloaded the software several times. When I allow Firefox import settings of Safari, it takes more than 40 minutes and then loses everything when I restart Firefox. I tried to start Firefox in safe mode, but it does not help.

  I use Mac OS on a MacBook Pro 17 "2011 start 10.6.8. Everything else on the computer seems to work very well.

  The application databases

  Name: Firefox
  Version: 42.0
  Build ID: 20151029151421
  Update channel: output
  User Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6. RV:42.0) Gecko/20100101 Firefox/42.0
  Windows multiprocessing: 0/1 (default: false)
  Safe mode: true

  Reports of incidents for the last 3 days

  All Crash reports

  Extensions

  Name: Firefox HTTP authentication from the resources of the fix
  Version: 20150902.02
  Enabled: false
  ID: [email protected]

  Graphics

  Asynchronous Pan/Zoom: no
  Device ID: 0 x 6741
  GPU accelerated Windows: 0/1 Basic
  Supports decoding H264 Hardware: false
  Vendor ID: 0 x 1002
  windowLayerManagerRemote: false
  AzureCanvasBackend: skiing
  AzureContentBackend: quartz
  AzureFallbackCanvasBackend: no
  AzureSkiaAccelerated: 0

  Important change preferences

  Browser.cache.Disk.Capacity: 358400
  Browser.cache.Disk.filesystem_reported: 1
  Browser.cache.Disk.smart_size.first_run: false
  Browser.cache.frecency_experiment: 4
  browser.download.importedFromSqlite: true
  browser.places.smartBookmarksVersion: 7
  browser.sessionstore.upgradeBackup.latestBuildID: 20151029151421
  Browser.Startup.homepage_override.buildid: 20151029151421
  Browser.Startup.homepage_override.mstone: 42.0
  DOM.apps.Reset - permissions: true
  dom.mozApps.used: true
  extensions.lastAppVersion: 42.0
  gfx.blacklist.Direct2D: 3
  gfx.blacklist.layers.Direct3D9: 3
  gfx.blacklist.WebGL.MSAA: 4
  Media.GMP - gmpopenh264.abi: x86_64-gcc3-u-i386-x86_64
  Media.GMP - gmpopenh264.lastUpdate: 1447836477
  Media.GMP - gmpopenh264.version: 1.4
  network.cookie.prefsMigrated: true
  Network.Predictor.cleaned - up: true
  places. History.expiration.transient_current_max_pages: 104858
  plugin.disable_full_page_plugin_for_types: application/pdf
  plugin.importedState: true
  privacy.sanitize.migrateFx3Prefs: true

  Important preferences locked

  JavaScript

  Incremental GC: true

  Accessibility

  Enabled: false
  Prevent accessibility: 0

  Versions of the library

  NSPR
  The expected minimum version: 4.10.10
  Version: 4.10.10

  NSS
  The expected minimum version: 3.19.4 based ECC
  Version: 3.19.4 based ECC

  NSSSMIME
  The expected minimum version: 3.19.4 based ECC
  Version: 3.19.4 based ECC

  NSSSSL
  The expected minimum version: 3.19.4 based ECC
  Version: 3.19.4 based ECC

  NSSUTIL
  The expected minimum version: 3.19.4
  Version: 3.19.4

  Experimental features

  The problems are gone now. However, I'll never know exactly what that caused them. When I restarted the computer in safe mode problems continue. But when I tried to restart my computer does not recognize the hard drive in safe mode or in normal mode.

  It is possible that the Firefox problems were caused by a faulty hard drive.

  I was able to rebuild the directory with Disk Warrior and transfer my files, but the disk would not boot. Fortunately, I had a spare hard drive. I installed and reloaded all my software and data from scratch. I also downloaded the latest version of Firefox. Firefox works fine now.

  Thanks for all your suggestions. They may not have fixed this particular problem, but I learned a few new tricks from you to solve other problems.

  Allen

• Why is the box to remember password is gray? It used to work now it won't save them.

  Why is the box to remember password is gray? It used to work now it won't save them.

  This could be because you have set Firefox not remember the history. Who did you intentionally? It is defined in the Options dialog box:

  "3-bar" menu button (or tools) > Options > privacy

  Maybe it would work if you choose "Use the custom settings for history" and not to turn off specific things that you want to disable.

  A little luck?

• Why do I get an incorrect WEP key during the installation of my printer?

  Product - specific document

  http://support.HP.com/us-en/document/c00772798

  I worked for HP.

  This work also (well) with the J6480 printer.  I was using a Linksys router Wireless 'G' which creates 4 WEP keys, allowing you to choose which use.  I sent #2 key and it would not accept.  The only way I could make it work was to disable wireless security, is not my idea of a good option.  After numerious emails and 1 appeal to support with no ideas that I decided to seek out here and finally managed to do accept the WEP key.  I ended up completely uninstall/reinstall to get everything to work 100%, but now it works like a charm.  For those of you with a similar problem, when using a router that generates more than 1 WEP key, try using (sending) key #1

  HP Note: your support by e-mail/voice should be as good as your online forum support

  Thanks to DaniW-now I'm a happy camper

• Settings network won't save, always defined on the unnecessary Manual proxy setting.

  When opening Firefox, go to any Web site displays an error message saying that the proxy server is refusing connections. Allows you to manually adjust the network settings solves the problem, but only for as long as firefox is open. Already gone through all the 'preferences won't save' troubleshooting patches with no result.

  Thank you SO much cloudlift. I had this problem for a while now and finally managed to resolve it with your help. My problem wasn't with foxmarks, but personas.

• WEP KEY: Net gear wireless range extender model ex6150

  My WEP key is 26 characters. When entering my WEP key, I'm alerted that no more than 10 characters are allowed. What should I do?

  Thank you. Technical support Netgear has accompanied me throughout the process last night. The extender works well!

• Tecra A8: Could not establish a wireless connection with encriptación WEP KEY

  Hello.

  I just got a new TECRA A8-143, and I am unable to connect to a 3COM Wireless ADSL Modem when the encriptación WEP key in active. The encriptación turns off as soon as I am connected to the internet, any suggestions!

  Thank you

  My first suggestion is you typed and was using an incorrect encryption key!
  Did you check these settings?

• Printer all in one HP3520 - how to select the wireless network and enter the WEP key?

  According to print my wireless network is detected.

  How to connect the! @# % printer $ fo the wireless network and enter the WEP key?

  Instructions on the HP site tell me to selet NETWORK on the printer control panel.  Well, there's a way to select the NETWORK from the control panel.  It is not an option for him.

  I downnloaded and installed the latest drivers.

  I have restored the default settings.

  How to select the wireless network and enter the WEP key?

  All of HP's instructions seem to be for a newer printer with a touchscreen.

  I want that the printer is connected to my main computer via the USB port.  I want to be able to print wireless phones and tablets.

  My 3520 is not a 'touch Screen' and it has wifi.

  However, the following work:

  Try to open the HP Deskjet 3520 icon, open the utilities tab, click on convert USB wireless, by following the steps on the screen.

  This leads me to believe that ONLY the wireless doesn't work.  I know now that the part of the sentence "Convert USB to wireless connection" is supposed to mean "works like USB and wireless.

  Thank you for your help

• I am unable to adapt both the screen saver is activated

  I am unable to adapt both the screen saver is activated, I put the link, but it acts as if it was before progrmmed?

  Also is there a way to avoid to connect every time?

  The problem with these parameters is that they overlap.  The screen saver setting is perhaps not the one place to look: you should also watch your 'screen time out", as well as waiting times"lock screen ".  In addition, it could be the energy saving sleep timer.  From the point of view of the user, they all look the same (the screen turns off), but to get the desired exact situation, you may need to check up to 4 places.

  1. Right-click on the desktop > personalize > screen saver
     Even if you do not use a screensaver, this timer value is used to lock the screen.  The value 'none' and make sure that the check box is disabled, it does not require a password.
  2. Power options > Change when turn off the display
     Also look at the "require a password on wakeup" option here
     
  3. Power options > change when the computer sleeps
     Also look at the "require a password on wakeup" option here
     
  4. Application settings > lock screen settings