Adapters WiFi RT5390R and RT3290

Similar Questions

• I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?

  I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?

  If you want your Apple Watch to stay connected to the phone, you need to keep compatible BlueTooth.

  All functions of the phone will use up the battery life. Some things more than others. Screen brightness, low cell signal strength and location services are major culprits. If you are having battery problems, see this article:

  http://www.scottyloveless.com/blog/2014/the-ultimate-guide-to-solving-iOS-batter y-drain

  I don't know what it means being out of doors has to do with the question.

• Problems with wifi, bluetooth and gps in my iphone after updating iOS 6

  After that the last iOS 9.3 update my iphone 6 has problems with wifi, bluetooth and gps. Now, my wifi connection is slower and falls easily on a short distance. My bluetooth does the same. But the biggest problem is the GPS on my phone. I tried Island:

  -By doing a reset network

  -Do a reset total and restore my phone

  -To restart my phone twice.

  -Audit and third-party applications unnistalling

  Nothing works. I was in the apple store where they checked my phone and they say everything is ok with the phone. I'm not crazy, and I know when something does not work correctly. Also, I think it's iOS 9.3 update a reaponsible for my phone issues.

  Please fix bugs fast.

  Having the same exact problems since the upgrade. In addition, battery drains very quickly now, and sometimes the phone becomes very hot. It took to the Genius Bar and they told me everything was normal in the diagnostic tests. Restored, restarting, etc., and always the same problems. GPS locates me, but then don't follow my movement at all and told to go outside as the gps is not detected even if I am outside. Bluetooth connection to the car and watch grave intermittently. Signal WiFi is greatly reduced and falls easily.

• Notebook Compaq 420: Notebook Compaq 420 - back space key does not when wifi or / and Blurtooth on

  Hello!!!

  My notebook Compaq 420 - enter, back space, arrow up and down keys do not work when wifi and/or Blurtooth is swicthed on. Keys function properly as soon as wifi and bluetooth are swicthed off.

  Then only, when Wi - Fi and/or bluetooth is turned on - keys stop working.

  without Wi - Fi and/or bluetooth - keys work properly.

  Tried it under things;

  1. update of the WOOD.

  2. update the driver keyboard (uninstall and reinstall)

  3 Wifi driver update (uninstall and reinstall)

  4 W 7 reinstallion

  As keys are work properly when wifi or / and bluetooth are turned off so no problem with the key or the hardware.

  Help, please.

  I think the problem is with wifi/blueooth activate key. something like short circuit.

• HP Pavilion slimline: need for instructions on how to put wifi address and password.

  Need instructions on how to put wifi address and password to secure the wifi connection.  Please notify.

  HIH @G_ee,

  Welcome to the Forums of HP's Support.   I see you want to learn how to connect your HP Slimline computer to your secure wireless network.   I am convinced that I will be able to help you find a solution, and I ask only that pay you it forward. When solve us the problem, I would mark you kindly post as accept as Solution so that others have the same or similar problem can find what worked for you.

  I have included a document to Add a device or computer to a network of Microsoft for you.  It will guide you through the steps to add the computer to your network.

  Please let me know the results.

• Pavilion 15-N064NR: update of wifi card and memory

  Hello, I have problems with my wifi, just disconnects all the time, that I can install and new and faster wifi card, and I can add more memory to this laptop thank you Mike

  Yes, you can switch the two quite easily. Here is the Service Manual:

  Manual

  You have 6 GB of memory which is a 2 gig and a 4 GB module. Your best return for the dollar will come to launch the 2 gig module and install a second 4 GB like the original module. This will give more memory and also run faster since it is dual channel. You could install up to 16 GB (2 x 8), but it would cost a lot more and provide many additional benefits. See p. 47 of the manual for instructions.

  http://www.Amazon.com/HP-691740-001-1600MHz-PC3L-12800-memory/DP/B00CI08FX4/ref=sr_1_2?ie=UTF8&QID=1448663553&SR=8-2&keywords=691740-001

  Your model has no HP whitelist and you can install any wifi card that is the right form factor.  See p. 49. It's a low-profile mini-pcie form factor. The original wifi offered thereon cards are little lame. It's one of the better ones:

  http://www.Amazon.com/Intel-network-7260-HMWG-wireless-AC-Bluetooth/DP/B00DMCVKMU/ref=sr_1_1?ie=UTF8&QID=1448663419&SR=8-1&keywords=Intel+7260ac+WiFi

  Let us know if you need more information. If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Button on / off Wifi, BLuetooth and Radio? [HelpMe]

  Hello friends with waterfalls and a button, I can / disable Wifi, Bluetooth and radio?

  Use a target, Radio and Wifi, Bluetooth to access the settings, at the same time using this option, please.

• Ongoing problem with my Netgear WiFi adapter and hardware software.

  Please help me solve this problem, which still exists.  I even once contacted NETGEAR, but they say it's a problem for six months and it is only cosmetic in that the adapter Netgear WIFI does his job, despite the failure of the adapter Netgear WIFI Wizard appears immediately except to re - install via CD Netgear...  Read on: Although my new Netgear dual-band "N" WIFI ADAPTER works optimally and, out of curiosity, I have re-installed several times using the accompaniment CD... there is a small problem I want to solve: when I click on the WIFI adapter desktop ICON, I get a window of PSI with the message "FAILURE of SERVICE.  Yet once, WIFI actually moved and is also indicated under the programs/features and works perfectly well.  When I bring up the icon under all PROGRAMS, the same result occurs: the same message reappears: "FAILURE of SERVICE.  When I called Netgear to the Philippines call center, support staff of so-called tech advised me to ignore the message and that I was the first caller on this issue, "as long as the WIFI adapter gives you the desired signal quality and speed, just ignore... "When I pressed on others, a supervisor at the call center told me that she would pass on the information that I provided to their engineers to study the problem.  In addition, the supervisor told me that no one had contacted the Center to call on this particular issue.  Yes, I even disabled the built-in WIFI adapters (Atheros), but the 'problem' in question still exists.  Please note that it is a phenomenon of long months and that in the past whenever I clicked on the ICON, the regular Netgear Windows would come upward, including the various hot spots in option, etc. I even updated the software successfully and rebooted the laptop, according to Microsoft's Windows Update instructions.  Please let me know what is happening and how I could fix this ' cosmetic ', if that's what it is, according to Netgear support.
  Thank you very much.
  Joe

  Hello

   
  Have you tried the steps suggested by John from the link below?
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/when-i-try-to-run-NETGEAR-software-for-use-with-my/ae7ae3be-BE62-4742-b9fd-1cf4b8dc3124
   
  If so, then share the results on this thread.

• WiFi TV and laptop share home network to view rather than cords

  I would use a home Wifi network instead of using cables to my TV to display my monitor to laptop, is - it possible?

  And I can do to boost my Sony TV NSX-46GT1 wifi in addition to adding a USB key?

  Yes, you can wireless transmit video and audio from your computer to your TV using an adapter. Sony does not manufacture such an adapter; However, there may be third-party adapters that can allow you to do this.

  In addition, your computer should support wireless display feature. You can contact your computer manufacturer for more information about this feature.

  Please explain about stimulating your Sony NSX-46GT1 TV and jump drive you speak for assistance in this regard.

  If my post answered your question, please mark it as an "accepted Solution".

• How to configure NAT for Hyper-V on laptop with wifi, wired and vpn connectivity

  Me, as I suspect a lot of people, I have a laptop with WiFi connection, cable connection and VPN connection (Cisco AnyConnect), which

  also uses a virtual adapter (activated when active). I searched for some time a way to be able to move to

  Hyper-V in VirtualBox. Blocker full for me is the need for a lot of my virtual machines to be able to connect to the

  Internet through 'the connection active' in the way that VirtualBox and VMWare Workstation/Player through their NAT feature.

  I'm not a networking wait, but after looking around, can't seem to find something that is simple enough for me to configure,

  with a minimum of resources, which allows me to connect a Hyper-V virtual network via a simple NAT device adapter

  all three potential network connections - most seem to not assume that one connection out of the machine, which of course does not

  me what I want.

  Three questions:

  1. is there a Windows application available that an adapter (like loopback) internal which acts as a real NAT device to one of the surfaces

  external access via the active network connections and through the Windows Firewall and any other antivirus, components etc. for

  the road to (i.e. behaves like a "normal app" inside Windows for internet access)? It would be the best option, because it would be

  "always there" when I run virtual machines

  2. display of my lack of knowledge around this feature, don't RRAS (and I know that this is not an option "minimum contact") allow you to

  Connect an internal network adapter to several external network adapters?

  3. on the Linux/OpenBSD various base/NAT routers, are everything that allow several external adapters and who are

  relatively easy to set up (by an independent expert of the network)?

  Really, we could do with this feature for Hyper-V on the desktop, but willing to work around him, if there is a way to at least the

  use virtual machines, once it is easy to install.

  Hello

  The question is more suited in the TechNet forums. So I would say you mention the link and send the request in this forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads

  For any information related to Windows, feel free to get back to us. We will be happy to help you.

• Lenovo WiFi question and Standby / Hibernate problem

  I have a Lenovo 3000 v200 laptop under Windows XP SP3 (recently retired).

  It is fully updated with all Windows updates and updates from Lenovo and no change in

  material has been done.

  I have two annoying problems. I searched the forum good responses

  (many other users seem to suffer from similar problems) but no solution has been

  presented.

  1. my wireless connection works 95% of the time without problems.

  But occationally the wireless fails to launch when I start the PC.

  I have nothing bring WiFi on, only a reboot will solve

  the problem. I tried to play around with the options available

  via the WiFi software without success. Some networks are visible

  even if the hardware and software WiFi switches are 'on '.

  Device Manager does not indicate something wrong with the unit.

  I saw this message several times: "battery wireless failed to launch.

  Someone at - it a solution for this (restart to the exclusion, that is)?

  2 standby does not work. When after a wait of some processes

  You seem to lock up most of the resources of the system. One of the hearts

  works at 100% load and the other is inactive. Research in the Task Manager

  I see several processes competing for the top position in the CPU usage.

  I get not a clear idea of this process is the problem, but I think it's safety

  Associates. There seems to be a driver problem, rather than the result of my software

  (Firewall, Antivirus,...). I guess that since the same software works well with

  watch over my other laptop (also Win XP SP3). Apart from monopolizing the

  System resourses the problem does not prevent me to get online and

  in collaboration with most of the applications.

  Hibernation does not work. During the recovery, the PC crashes completely

  (before that the Office is reached) and it will not meet any entry, a material

  reset is necessary.

  Any thoughts on the above problems?

  Everyone has the same problems?

  Suggestions for updating/making drivers back?

  Happy for Fredrik advice

  Sorry for bringing This new thread since no one else seems interested.
  I however managed to solve these problems on my own, so I want

  share workarounds if by chance anyone would win.

  First one quote another post by myself:

  «Sometimes when I boot the PC will connect to the network and everything works fine.»
  At other times, after start-up, the "wireless stack initialization failed, error code: 118 ' problem

  and the only way to fix it seems to be a restart of the PC. Anything else I do to display the network.
  If I look at the tab network layout in the Task Manager indicates that none of the adapters are available (cable eth.
  Access also fails).  This is obviosly a problem with the Access Connections software
  Since the wireless network works well when I let windows manage... »

  So there is no real solution to the problem WiFi only workaround is to let Windows manage the

  WLAN security. I used the laptop for two weeks now and wireless works perfectly under XP

  control.  What have I done? I edited my profile of connection in the dial-up connections:

  Open connections > location profile tab > select profile > wireless settings tab > option 4.

  Wireless security type = use Windows to configure wireless network

  I must say that the logins is useless to me now. It does not allow me to view and select

  wireless networks, but which can be done both through the windows graphical user interface. However, I can use

  graphical versions of Ping, Trace Route and IP Config (in the dial-up connections) if I want to.

  The solution to the second problem was easy as soon as I find the culprit.

  This problem is also related to WiFi, apperently drivers Intel WLAN/material

  can not handle standby correctly

  http://support.Microsoft.com/kb/951447

  What have I done? I stopped windows turning off the wireless network adapter to save power:

  Open Device Manager (for example the Panel > system > Hardware tab) > right click of the WLAN card >

  Select Properties > power management tab > clear the check box to be able to save.

  "Allow the computer to turn off this device to save power".

  Sleep now works as expected. I have not tried Hibernation and do not hear.

  Could be useful to someone.

  / Fredrik

• iPhone 6 WiFi disconnection and incorrect GPS location

  From a week ago, my iPhone 6 GPS would show incorrect places where I was not only in the Maps app, but also in other applications that use GPS services. I tried to fix it myself by force it reboot several times, which did not work, and restore twice to its factory settings. After execution of factory resets, my phone would connect to my home WiFi network, but leave this connection about 10 minutes after it connected. Whenever it was actually connected to my network, the WiFi was incredibly slow, often forcing me to turn my WiFi and use LTE, resulting in surpluses on my data plan. Reset my network settings does not solve these problems, so my question is: is it possible for me to fix my phone without sending it in to Apple for repair or buy a new phone?

  Thank you very much for your answers.

  Hello

  As a first step, it can help to upgrade your iPhone to the latest version of the software:

  Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

• WiFi unstable and slow Internet high speed

  Hello world:

  Recently, I am facing a problem of unstable wifi, slow speed of the internet of my macbook pro. I hope someone could help me with my problem.

  
  

  Symptom:

  Internet mainly speed just unstable using a wifi connection. (no problem with wifi connection self and my wifi suddenly grave would not be)

  Example:

  • FaceTime with my friends and the connection would suddenly abandon or images & audio gets fuzzy.
  • Videos in online streaming and suddenly occurs buffering.
  • Download file of software update iPhone via iTunes, the speed is slow, he needed to take 2 h at the end and later on a window display "cannot download and check your internet connection".
  • Suddenly cannot open websites like site apple.com, google.com. Sometimes it will take more time to open Web sites.

  Hardware and software:

  MacBook Pro mid-2009, OS X EL Capitan 10.11.5

  ISP: Cox, 50Mbps

  Modem & router: Netgear N450

  Test:

  Turn off my wifi and connect my macbook pro with modem & router with cable, internet high speed is stable and fast. Internet speed download speed test result display is of around 60Mbps, download speed is around 8Mbps. And I tried streaming using the connection cable, there was no buffering.

  I already tried the possible Solutions:

  • Restart the Macbook pro and restart Modem & router: will not work. I mean the internet will be very well at first, but later would be unstable again.
  • Reset Wireless Modem & router and change channels: useful, but not completely solve the problem. After you change the wireless channel, I tested my internet speed and the result showing 20-40Mbps (slower than 60mbps) speed download. Sometimes, the result will be like 6-8Mbps and sometimes it will be 60Mbps. If its unstable.
  • Wireless diagnosis: result indicates connection is good.
  • Called my ISP provider: they checked and said all right.

  
  

  Other Questions & details:

  • The internet is ok for most of the time. But when all of a sudden I can't open site or I can't download and streaming & FaceTime at normal speed, his frustration.
  • I thought it might be related to my hardware since its an old macbook pro. I can't run Apple hardware test because I don't have the installation disc more and my macbook pro is very old. Is it a third party software that can perform the test hardware on mac?
  • My wifi used to be very stable and I don't have to worry. Just for these last two weeks.

  
  

  
  

  I really appreciate your time and help! Looking forward to any reply!

  Wi - FI connection drops

  Connection Wi - Fi in OS X Yosemite problems

  Wi - Fi in OS X Yosemite connection problems (2)

  Connection Wi - Fi in OS X Yosemite problems (3)

  WiFi potential temporary fix - Yosemite

  Also try turning off Bluetooth.

  WIFI AND BLUETOOTH FINALLY SOLVED, NOT REALLY - YOSEMITE 10.10

  If your Wi - Fi source is capable of generating a 5 GHz Wi - Fi network, try that in order to avoid conflicts with Bluetooth.

• 4th gen apple tv wifi, itunes and airplay problem

  My 4th gen of newly updated apple tv cannot keep a stable wifi connection while other devices can and does not appear on itunes when it is connected to the mac via the usb - c cable. AirPlay video mirroring also often freezes.

  does anyone have a solution to these problems?

• Connection WiFi slow and uneven

  My current WiFi set up includes an AT@T U-Verse, with disabled WiFi router, which is connected by a cable ethernet to an older Apple Airport Extreme, it seems AC 802.11. Both are located side by side in a Home Office. I also have an Airport Express, located in another room to boost the signal in other parts of my house and to my outdoor patio. This configuration was working fine until recently when the AT & T router has stopped working. He was replaced a new U-Verse router. Now, my signal is weak, slow and uneven in other areas of my house and on my patio. I reset my Apple Airport Extreme and Apple Express and the situation has not improved. I am at a loss to understand why this Setup no longer works. I called AT & T and they found that the Firmware has not been downloaded correctly to the new router, and it was an improvement has been corrected, but not much. Any ideas would be appreciated.

  Any time that you change your network hardware, it's always a good idea to perform a complete power recycling of your material.

  Check out the following user tip for more details. Please post back your results.

  If the performance does not reappear after that, we will have to start all over again with the U-Verse router and add the base stations of the airport in one at a time. It would be useful that you can provide the model number of the U-Verse router and model numbers of each of the base stations you will use in your network configuration.