Add a callback error

Similar Questions

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 'Add a media error' - first Elements 7

  Question for everyone.

  My laptop (with E.G. 8) is in the shop so I use my P.E. 7 edition on my home computer to create a simple project.  After attempting to add a clip of four circles (indeed, all 4 clips are very small, anyway), I get this pop up error:

  «Add a media error - there is not enough memory to add the requested media.»

  Now, I can tell you that on my computer, 90% of my work is sitting in an external hard drive of 2 terabytes.  I have over 200 GB of free space on my computer at home.  This new short project is one of the only projects currently sitting on my desk.  It is there no way that I'm out of memory.

  Currently, while typing this question on this forum, I defragment my hard drive and do a disk clean up.  Maybe my settings are disabled?

  Any ideas?

  Thank you

  David

  David,

  He has 'memory', and then there's 'memory '. This ARTICLE goes into details about a type of 'memory' and could be useful.

  In addition, resources can be stolen by other processes and programs, and this ARTICLE can be useful to make more of these resources, often seen as the 'memory '.

  I would also ask that you give us all the details of the computer, the source files and the project. This ARTICLE will give you some tips on this info would be helpful.

  Good luck

  Hunt

• The extensions will not appear in the add-on Manager; Error of Java to start Firefox

  When I click on tools-> addons, modules Manager opens but no show extension in the "Extensions" tab.

  I think that the problem is related to a start-up error message I receive. Whenever I open Firefox, an error message titled '[JavaScript Application]' opens and displays the following text:

  aObj is undefined - chooseValue ((Sub 0),"name")@resource:///modules/XPIProvider.jsm:7032
  @resource:///modules/XPIProvider.jsm:7142)
  @resource://yoono/yoonoLog.js ([object Object]): 95
  @resource://yoono/yoonoLog.js ([object Object]): 49
  (@chrome://yoono/content/yoonoOverlay.js): 176
  (@chrome://yoono/content/yoonoOverlay.js): 88
  @resource://yoono/yoonoService.js ([object Array]): 949
  safeCall ((function (aAddonList) {try {for (var i = 0; I < aAddonList.length; i ++) {_self.addOns [aAddonList [i] user.user] = aAddonList [i]; if (YOONO_ID == aAddonList [i] user.user) {_self.setExtensionVersion (aAddonList [i] .version) catch ;}}}}}})) (e) {CONSOLESERVICE.logStringMessage (e) (;} aCallBack () ;}), [object Array]) @resource://gre/modules/AddonManager.jsm: 50}
  @resource://gre/modules/AddonManager.jsm ([object Object]): 964
  AOC_callNext() @resource://gre/modules/AddonManager.jsm: 120
  @resource://gre/modules/AddonManager.jsm ([object Array]): 959
  PL_getAddonsByTypes (null,(function (aProviderAddons) {'use strict'; addons = addons.concat (aProviderAddons); aCaller.callNext () ;})) @resource:///modules/PluginProvider.jsm:110}))
  callProvider ([object Object], "getAddonsByTypes", null, null,(function (aProviderAddons) {'use strict'; addons = addons.concat (aProviderAddons); aCaller.callNext () ;})) @resource://gre/modules/AddonManager.jsm: 78}))
  ([object Object], [object Object]) @resource://gre/modules/AddonManager.jsm: 957
  AOC_callNext() @resource://gre/modules/AddonManager.jsm: 126
  @resource://gre/modules/AddonManager.jsm ([object Array]): 959
  ([object Array])@resource:///modules/XPIProvider.jsm:3094
  completeAddon ([object Object])@resource:///modules/XPIProvider.jsm:3895
  getAddon ([object Object]) @resource://gre/modules/AddonRepository.jsm: 504
  ("[email protected]", completeAddon) @resource://gre/modules/AddonRepository.jsm: 536
  ([object Object])@resource:///modules/XPIProvider.jsm:3899
  ((function (aAddon) {use "strict";
  function completeAddon (aRepositoryAddon) {aAddon._repositoryAddon = aRepositoryAddon; self.addons.push (aAddon); if (self.complete & & self.addons.length == self.count) {self.callback (self.addons) ;}}}

  If ("getCachedAddonByID" in AddonRepository) {AddonRepository.getCachedAddonByID (aAddon.id, completeAddon) ;} else {completeAddon (null) ;}}), 0, [object Array])@resource:///modules/XPIProvider.jsm:4796}}
  (0)@resource:///modules/XPIProvider.jsm:4795

  Any help would be appreciated.

  -Jason

  I had the same problem.
  (1) to fix it, you can check what addon is responsible for this mistake by viewing the extensions.log file in you profile file (lines).
  (2) access to the extensions of subfolder in your profile folder and delete appropriate addon xpi file or folder addon if it is not packed in xpi file.

  But ideally Firefox should protect Manager addon is better error in Addons (same addon disabled may cause this error).

• Office Live add-in gives error Code 80070643 1.5 installation

  When I try to install the Office Live 1.5 Add-in Windows Update encounter an "unknown error" and gives me error code 80070643. I tried to run Office Source Engine like help and support proposed, but the installation always fails. What else could be the cause of the problem?

  I have uninstall Office 2010 and installed the update for 2007. I guess Office 2010 was the problem.

• Add @ HPconnect unidentified error w/Printer Device

  Attempt to manually activate my HP Deskjet 3520 thru hpconnected.com, devices, add a device... allows me to add my printer, but then said there is no problem with the printer and the printer control panel check for info. However there is no info on any problem on the printer control panel - just ' copy, scan, etc. ". I had crossed just reinstall the printer through your configuration online on my new fi wi completed successfully. I am unable to go further with the settings of the printer, etc. Suggestions?

  Hi @NancyP2007,

  Welcome to the HP Support forums.  I understand that you are getting a message "Problem with the printer" in connected HP.

  Connected HP sometimes gives a false report that there is a problem not specified with the printer. HP has been able to reproduce the error.  If there was a genuine mistake, the message would point to the problem (low on ink, paper, etc). Unspecified error message does not prevent you to use ePrint.

• in Windows XP when I try to remove or add a program, Error 1324 the path my pictures contains an invalid character

  in Windows XP when I try to remove or add a program, I get "Error 1324 the path my pictures contains an invalid character"

  Hello

  1 is applicable to all programs that you are trying to install this question?

  See the methods listed in the section below and check if this helps you resolve the issue.
  You may receive one of three error messages when you try to install Streets and Trips or MapPoint
  http://support.Microsoft.com/kb/894510

  I hope this helps.

• updated from XP SP3 to Vista Home premium. cannot add a printer error 0x000006be

  ORIGINAL TITLE: just upgraded to XP SP3, Vista home premium. Windows Installer fails, local print spooler fails. I need help, please.

  1. installation of some results of updates and things of the driver ' a network error has occurred trying to read the file:

  C:\Users\Owner\Desktop\SystemRequirementsLab_Intel_4.5.13.0.msi ".
  2. when I try to "add a printer" for my HP Deskjet 2512 get this: "Windows can't open add printer." The local spooler service is not
  running. Please restart the spooler or restart the machine. »
  3. also I get "Windows can't open add printer." Impossible operation completed (error 0x000006be)»
  Can someone give answers right in front, and if I need to use the command prompt to resolve, be thorough in the entries, I need to do.

  Hi Chris,

  1, the System Requirements Lab software is used to check a system configuration to see if some games have compatible hardware.

  For more information, refer to http://www.intel.com/support/siufaq.htm

  You can always reinstall this software and drivers required.

  No. 2 and 3 seems to be specific to the printer drivers not working not properly.

  You can follow these methods to check whether the problem is resolved.

  Method 1:

  Step 2: Update Windows.

  As you have just upgraded to Vista, there may be some Windows updates pending. Please refer to this article and install updates.

  http://Windows.Microsoft.com/en-in/Windows-Vista/install-Windows-updates

  Step 2: Update printer drivers.

  You can visit the system manufacturers Web site and download and install the latest drivers for Windows Vista.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=5231933&

  For reference. http://Windows.Microsoft.com/en-in/Windows-Vista/find-and-install-printer-drivers

  Method 2: Restart the spooler service.

  Check out the link and run the troubleshooter that will attempt to restart the spooler service.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab3&V3H=winvistatab3&v4h=winxptab1

  Let us know the results of the above steps, and we will be happy to help you.

• Cannot add a printer, error in Vista

  Erased the spooler, even checked the LDM of LDR or anything like that, the problem is still there. the printer is on a network, the Add Printer Wizard identifies the printer, but this error pops up while trying to connect to this printer.

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: spoolsv.exe

  Application version: 6.0.6002.18005

  Application timestamp: 49e02592

  Fault Module name: StackHash_6855

  Fault Module Version: 6.0.6002.18005

  Timestamp of Module error: 49e03821

  Exception code: c0000374

  Exception offset: 000afaf8

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Information additional 1:6855

  More information 2: bf9140d10f64d4a01a3efb1615bcb845

  3 more information: 7bbe

  Additional information 4: 2f2b670f37ea1b48c4e02d52724184cb

  Read our privacy statement:

  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Hi Zainulabad,

  1. What is the exact error message?

  2. you are trying to install a cable or a wireless printer?

  3. you install this printer for the first time?

  Check if the print spooler service is running.

  A. click Startand then click Control Panel.

  B. double-click Administrative Toolsand then click Services.

  C. double-click the Printer Spooler service, and then change the startup type to Automatic. This option sets the spooler service starts automatically when you restart the computer.

  D. Si you want to start the spooler service immediately, click Start in the area of The State of the Service .

  Install it as a stand-alone device on the network and then add a connection to the printer on each computer that is on the network.

  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Install a printer on a home network
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Add vCenter Workflow error: unexpected status code: 404

  Hello

  I am trying to add a vCenter vRO 7.0.1 host using the plugin existing VC (ver. 6.0.2.3435085) and I run a strange question.

  If I choose NO for the option ' will you orchestrate this instance "then the workflow completes successfully.  This does allow me to run workflows against the vCenter.

  When I remove the existing vCenter and re - run the workflow of vCenter Add, this time by choosing YES, the workflow fails with error validation process: unexpected status code: 404 (Workflow: Add a vCenter server instance / validate (item2) #1)

  Any ideas why check YES causes this?

  My entries:

  Host: fqdn.servername.com

  Port: 9443

  Path: /sdk

  Ignore the Cert: Yes

  Thank you.

  Hello

  This error probably means that the port number is incorrect.

  Are you sure 9443 is the correct port number? Usually, the port number is 443, not 9443 (port 9443 is where vSphere Web Client is available). Could you re-run the workflow with port 443?

• Chargeback add vcenter SQL error

  Hello

  I'm trying to adds a server vCenter ChargeBack.

  I get the following error message:

  The invalid vCenter Server database. The vCenter Server database must have the following views: VPXV_HIST_STAT_DAILY, VPXV_HIST_STAT_WEEKLY, VPXV_HIST_STAT_MONTHLY and VPXV_HIST_STAT_YEARLY

  On this post, (https://communities.vmware.com/thread/236730) say that the sql account must be db_owner on the vCenter database, I have that and say that we create the views.

  In SQL management Studio, I see these views, but exactly. I have the same names, but like this: VMW. VPXV_HIST_STAT_DAILY, VMW. VPXV_HIST_STAT_WEEKLY...

  Is this normal?

  Best regards

  Hello

  I solved my problem.

  In fact, I changed the schema (in sql) for the user to sql dbo to MVW vCCM and I can add a vcenter.

• Add swatch throwing error 1200

  I have a simple script that tries to add a shade. However, it is to launch ' error 1200: Illustrator error: 1312914990 ('NA ~.'). Line: 18-> newSpot.colorType = ColorModel.SPOT; "This is an example taken directly from the doc, the only change I made is I'm getting my CMYK values from an object (colors). Also, when I hardcode the values for CMYK values, it works.

  function hand (argv) {}

  addSwatch ('Black');

  }

  color var = {'Black': {'c': 0, 'm': 0, 'y': 0, 'k': 100}};

  function addSwatch (color) {}

  newSpot var = activeDocument.spots.add ();

  newColor var = new CMYKColor();

  newColor.cyan = colors [color] .c;

  newColor.magenta = colors [color] ".m";

  newColor.yellow = colors [color] there;

  newColor.black = colors [color] Laurette.

  newSpot.name = color;

  newSpot.colorType = ColorModel.SPOT;

  newSpot.color = newColor;

  var newSpotColor = new SpotColor();

  newSpotColor.spot = newSpot;

  }

  main();

  You did very well, you can not just the name "Black."  addSwatch ('black');  will work but not addSwatch ('Black');

• Add a trandata error!

  Hi all
  
  I do not add trandata to the table name 'the letter '.
  
  info...
  
  GGSCI (xxx) 5 > lists the tables TEST.*
  
  TEST.trn_subcommittee
  TEST.trn_un_recive
  
  Found 180 paintings meet the list criteria.
  
  GGSCI (xxx) 6 > add trandata TEST.trn_un_recive
  ERROR: No viable table don't match specification.
  
  GGSCI (xxx) 7 >
  
  Thank you
  Khan

  Why are you double-quoting an identifier (for example, the name of the table)? Makes you sensitive forever. It is, on, look for the technical name to do this, wait, she comes to me, stupid. It's a self-inflicted wound.

  [oracle@otn ggs] $ sqlplus CBC/src

  SQL * more: Production of release 11.2.0.1.0 Mar 4 06:42:41 Oct 2011

  Copyright (c) 1982, 2009, Oracle. All rights reserved.

  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > create table regardless of (ID);

  Table created.

  SQL > exit
  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  [oracle@otn ggs] $. / ggsci

  Oracle GoldenGate for Oracle shell
  Version 11.1.1.0.0 Build 078
  Linux, x 86, 32-bit (optimized), Oracle 11 on July 28, 2010 13:22:25

  Copyright (C) 1995, 2010, Oracle and/or its affiliates. All rights reserved.

  GGSCI (otn.localdomain) 1 > dblogin userid ggs, ggs password
  Connected to the database.

  GGSCI (otn.localdomain) 2 > add trandata src.whatever

  2011-10-04 06:43:34 WARNING OGG-00869 No. unique key is defined for the table WHATEVER. All viable columns will be used to represent the key, but cannot guarantee the uniqueness. KEYCOLS can be used to set the key.

  Additional recovery data enabled for table SRC record. NO MATTER WHAT.

  SQL > create table 'bad_idea' (identification number);

  Table created.

  SQL > exit
  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  [oracle@otn ggs] $. / ggsci

  Oracle GoldenGate for Oracle shell
  Version 11.1.1.0.0 Build 078
  Linux, x 86, 32-bit (optimized), Oracle 11 on July 28, 2010 13:22:25

  Copyright (C) 1995, 2010, Oracle and/or its affiliates. All rights reserved.

  GGSCI (otn.localdomain) 1 > dblogin userid ggs, ggs password
  Connected to the database.

  GGSCI (otn.localdomain) 2 > add trandata src.bad_idea
  ERROR: No viable table don't match specification.

  GGSCI (otn.localdomain) 3 > add src trandata. "" bad_idea ".
  ERROR: No viable table don't match specification.

  GGSCI (otn.localdomain) 4 > add trandata 'SRC '. "" bad_idea ".
  ERROR: invalid TRANDATA attribute. "' bad_idea ': NOKEY or PASSES waited.

  GGSCI (otn.localdomain) 5 > add trandata SRC. "" bad_idea ".
  ERROR: No viable table don't match specification.

  If you really want to use a name like "Badtablename", then you can add it trandata step through SQL * more and alter the table

  Add additional log data.

• Audit Vault add redo collector error ORA-12514

  I test Audit Vault on OEL 5.5. When to add REDO collect on AV server has received the server error:
  
  
  add_collector - SrcName AVCLIENT avorcldb. REDO of ORACLE.COM - nom_agent of agent1 - colltype - REDO_collect av collname - avclient.oracle.com:1521:SRCDB1
  
  source AVCLIENT. ORACLE.COM checked for collector REDO Log Audit Collector
  Adding collector...
  Collector has successfully added.
  
  remember the following information for use in the avctl
  Name of collector (collname): REDO_collect
  the initialization of the REDO Collector
  ERROR: could not get by using jdbc connection AV source user:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=avclient.oracle.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=SRCDB1)))
  ERROR: ORA-12514: TNS:listener is not currently of service requested in connect descriptor
  
  
  And determination of naming is ok, I can connect to sever AV source.
  
  
  your prompt response will be appreciated

  Hi you
  as mentioned in your tnsname.ora file the name of your service is (av.oracle.com), but in your comand you use just AV
  Please check the instruction agiain and try again. If the problem persists, then do the above action.
  Hope it solves the problem

  Concerning

• Mail add an account error - account already exists

  With the help of El Capatain.  In the iMac Mail application I don't see an e-mail account.  It does not appear in e-mail accounts or in the preferences.  When I try to add email as a new account, I get the message "account already exists."  How do I add or view this email which has for some reason not any disappeared and I can't see him again?

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.