Add a channel CJC for thermocouple

Similar Questions

• Adding channel CJCS virtual/physical to existing task

  Hello

  I have a NI 9211 TC modules that I use to acquire temperatures through LabVIEW 2013 SP1, I have an existing task created in MAX.  I want to follow the CJC temperature sensor as well.  After looking at several positions, I discovered how to assign the physical channel hidden in a virtual channel in LabVIEW and then view the CJC value.  BTW...  Where there is under good which shows how to do this for the cDAQ series... find the 'AI Temp sensor built' is not clear (look under "analog EntrΘe, more").  But that part works now.

  -->, I want to add this channel CJC to my existing job, but I get an error.  See CJC1.vi

  Or, as an alternative, I would like to acquire the CJC temperature and acquire temperatures 8 other channels and then combine them somehow for display, recording, etc.

  Note: I want to keep the data in the format of the waveform, so they work as part of a broad data acquisition program that I have.  And I want to continue to use the existing task as it contains the calibrations (via the wizard of Calibration MAX).

  Here is the error that occurs when I run CJC2.vi with the active disabled code block.  (sometimes not is displayed after you press the Stop button)

  Error-200072 occurred at .vi:7050002 DAQmx Create Channel (I-temperature-built-in sensor)

  Possible reasons:

  Duplicate the layers in the list of physical channels are not supported by this unit.

  Channel name: _cDAQ3Mod1/_cjtemp
  Dual channel: cDAQ3Mod1/_cjtemp
  Physical channel: _cjtemp
  Feature: cDAQ3Mod1

  Name of the task: task of DAQ3

  Attached files:

  CJC1.VI<-- shows="" combined="" code="" and="" it="" throws="" the="">

  CJC2.VI<-- shows="" how="" i="" acquire="" and="" display="" data="" from="" 8-channel="">

  CJC3.VI<-- shows="" how="" the="" cjc="" temperature="" works="" by="">

  Now, how to combine the two?

  Thanks for the help,

  Derek

  Knowledge base seems to be a little confused right now because it only shows the node property for channel playback of strength. It's the correct property to read from a channel of CYC while you use it, but we must also set the CJC channel as an active channel first. The following snippet is the right way to do this in the context of this thread.

  Please note that you must use the built-in CJC source for that to be applicable.

  

• Add midi channel to a platform of guitar?

  IM using MainStage for a platform of guitar.

  Ive got an Apogee Gio for an analog interface and also using a Fishman Triple Play for a MIDI controller.

  In Mainstage, I wish I had a hybrid analog / noon entered, so I can combine something of the reservoir of the sample and the ordinary guitar pedal.

  Is it possible to add a bunch of midi channel available to guitar rig? can someone wake me through it?

  Hello

  atracksler wrote:

  Is it possible to add a bunch of midi channel available to guitar rig? can someone wake me through it?

  Yes

  (A) in layout mode, add a MIDI activity monitor and assign it to the MIDI from the Fishman. You can name.

  (B) in edit mode, select the hotfix that you want to add a software for instrument channel. In the area of the channel strip, click on the + at the top on the right and add a channel of the instrument (with the Fishman as input).

  (C) loading of sounds/instruments to be used.

  You could also simply start by loading an Instrument patch top try on things without the MIDI guitar (audio).

  TDC

• How can I add a separate apple for the iphone and ipad wife id

  How can I add a separate apple for the iphone and ipad wife id

  Hi, are the measures already implemented? If they are, you need to configure them again and establish a Apple ID at this time.

  Apple ID - Support official Apple

• can I add an antivirus protection for my iPad?

  It is necessary (or possible) to add anti-virus software for my iPad? I saw this question; However, it seemed there was an ongoing argument... didn't see the real answer. Thanks to anyone who can answer me just. Not a techie.

  You don't need any product antivirus on an iPad.

• Pavilion 9408nr: Add a second drive for another main drive for laptops

  How can I add a second drive for another main drive of laptop computers. I took the car on the same cell type that crashed by the motherboard. I put it in drive Bay 2. Problems with starting. I sometimes want to boot from disc 2. Is there a MBR somewhere? Are there jumpers to make it slave. Sometimes it will install the software on 2 without any question. Is there a way to make a slave?

  Important-copy all data on the second hard drive you want to save on the first hard drive.

  MBR of Windows with the hard drive. Use Windows Explorer to locate the second hard drive. Right-click on it and format it.  Once this done, all what one is a storage device and not bootable until the operating system is installed to it.

  The BIOS will only see the hard drive as a bootable as it will now be the only drive with a MBR boot sector.

  The days of placement of the jumpers to determine master or slave on the disks hard is long gone. SATA drives have no jumpers slave\master like the old school IDE and Eide did.

• CAN frame channel Conversion Library - add new channel will not convert on channel

  I hit a roadblock with the Conversion CAN frame v1.0.2 channel library.  I don't think I properly use the 'Add New Channel' vi because it always causes the frame on the canal to fail.  The channel to the conversion of image works fine.  I joined the Panel front and a simple example block diagram.  This VI returns the following error during the conversion of the chassis on the channel:

  Error 8702 is produced to convert image to Channel.vi

  Possible reasons:

  A call to the library met with a null pointer.
  Ensure that all entries in the VI have a valid value.
  In the case of tables, make sure the table is not empty.

  Any help would be appreciated!

  Thank you

  This issue is resolved by upgrading to the Conversion CAN Frame Channel 1.0.3 library and place the frchconvlib.dll file in the C:\Windows\system32 directory.

• How can I add new excel spreadsheet for each minute count?

  Hello world

  I am trying to add the spreadsheet excel for every minute, so I used the 'get date/time in seconds"from the minute function (%M) and use the structure of the event (change in value), but nothing happened, the structure of the event does not respond to change in a few minutes. bright ideas? Here is my problem (LV8.5) vi.

  

  Note: is just a part of my devices (history records) data acquisition program. I want to separate the data by date in excellent microsoft (but I first try to acquire data of minutes to see if my program works).

  Thanks in advance... !

  Several problems.

  One, you have an event to change the minute value.  But the event ever is dismissed because the only minute gets changed is by writing to the terminal of the indicator.  That fires an event.  The user must write to the command (which they can't because it is an indicator, not a control), or you write in this control (signalling) value property node.  Note that even if the event is called "changed value" the value itself would not actually change its previous value so that the event fires.  You would have to compare the new value to the old value within the structure of the event and made a decision in the code on what to do.

  Second, if the part of the code worked, your loop would end and execute, the structure of your business.  But once this happens your program would end.  You would never be able to do for the next minute.

• Desktop themes: I am trying to add a new theme for my office everyone isn't a site I can download a halloween theme

  I am trying to add a new theme for my office does anyone no site I can download a theme halloween or any good themes besides?

  Do the free trial of windowblinds is always easier: http://www.stardock.com/products/windowblinds/

  You can download more than 4500 different themes for it here: http://wincustomize.com/explore/windowblinds

  teengeek.freehostingcloud.com

• Cannot add properties of jad for the compatibility mode for the COD file metadata.

  Hi all.

  I need to disable the application that are installed compatibility mode using the ALX file. I read in an another messages it is possible to add custom file JAD directly properties in the COD file. I tried to create test projects using Blackberry JDE, Blackberry Eclipse plugin generation tools and use Eclipse with ant. Then I tried to add a JAD file for projects and by adding the following properties:

  RIM-TouchCompatibilityMode: false
  RIM-TouchCompatibilityMode-UserChangeable: true
  

  Also I tried specifying the properties of this:

  RIM-TouchCompatibilityMode: 0
  RIM-TouchCompatibilityMode-UserChangeable: 1
  

  But it seems that it does not help to automatically avoid compatibility mode for applications that are built using JDE4.2.1 or earlier. I ran the test on Storm 9530 camera with 5.0.0.32 8 preinstalled JDE. I also wipe my phone several times to avoid the capabilities that the compatibility mode settings is saved.

  In addition, before installing the application I also checked this jar file compatibility mode properties which was built contained in this manifesto.

  Please, anobody can advise which go bad. Or it seems that there is no possibility to implement the solution that are built with the JDE at first then 4.7 and are installed using the ALX file.

  I never could get this job.

  Sorry, don't know what the deal is.

• Add bb-cascades-oauth for my project

  How to add bb-cascades-oauth for my project?

  https://github.com/BlackBerry/BB-Cascades-OAuth

  (BB native SDK can not import solution repo)

  has been faster to write my own from scratch.

• Is there an Add on XP Mode for Windows 7 Home Premium?

  Is there an Add on XP Mode for Windows 7 Home Premium?

  I'm sorry, but there isn't.  Microsoft don't think individuals have this feature.

  You can use Sun's VirtualBox to install a licensed copy of Windows XP in a virtual machine.

• How to add and remove app for desktop icons in windows 8?

  How to add and remove app for desktop icons in windows 8?

  Try right clikc on the desktop will create new and the shortcut then copy and paste the path

  Otherwise just right-click on the icon you use to get the programs and send to the office or by copying and blocks the icon on your desktop

  I'm sorry if I still get the wrong end of the stick and maybe someone else you know what

  hope this helps

  I.T. tech admin

• Cannot add Windows Media Center for Windows 8

  Original title: addition of WMC for Win8

  I am trying to add Windows Media Center for Win8 Pro without success after a few days, I tried not am no further forward I tried the content road add, I got a key and enter key MBFBV-W3DP2-2MVKN-PJCQD-KKTF7 which is no longer valid, it is not that difficult.

  Hi Brian

  I finally solved the problem by getting a new key from Microsoft, go to the entrance to http://windows.microsoft.com/en-US/windows-8/feature-packs your e-mail address and they will send you a new license key if all goes well they will still do the free offer.

  Concerning

  Paul

• I try to add an image map for the first time using Dreamweaver CC

  I am trying to add an image map for the first time using Dreamweaver CC in an html site.

  I can get map controls is displayed when I select the image in the code, and I can select the rectangle tool.

  However, when I try to select the area of the image disappears from the section of the map of the properties viewer and I can't select the area for my hyperlink.

  What I am I missing videos online are it seems so simple, but something with my page is not allowing me to withdraw this.

  This is the code section and the image that I'm trying to add the link.

  < side class = "sidebar" >

  < img src = "images/flowchart.jpg" alt ="product dev. Flowchart">

  < / side >

  Please help or give me any advice... There might be something to do with the fact that my site is "sensitive"?

  Hello

  You could just add links to each box, but a better solution would be to use svg for this. Unfortunately, it is easier for me to write for someone who does not know svg to do.

  If you have Adobe Illustrator create your svg using this program, then it would be a case to add links manually to each box created in the svg code. SVG is an xml-based language and not a real image, even if this is how a browser will display the it.

  PZ