Add a contact to the "to:" line on messages and emails

Similar Questions

• Add several contacts in the list of sent messages.

  Here's the thing:
  At the time, I sent lots of e-mail messages.
  Now, I want to be able to select any or all of these messages and add all the recipients of all messages in a single list.
  Is it possible to do it automatically, or I have to open all messages and add the addresses one by one?
  Thank you very much.

  As soon as, Thunderbird adds contacts not in your personal address book to an address book "collected addresses".

  Add all recipients of all messages in a single list.

  I don't know what that means. You want to create a new address book or a mailing list?

• I have to add new contacts in the database. Should what stage of treatment I add?

  I have to add new contacts to the database. Should what stage of treatment I add?

  Hello

  Please use "Save to the Contact Table" stage of treatment.

  Thank you

  edynamic Experts Eloqua

• Can you add a contact to the canvas of the campaign of the Builder program?

  I have a program that changes the owner of a contact and update in the CRM. I also want to then move them to a canvas of campaign. Is there an action step that allows me to do this? I don't see that add to the generator program options.

  Hi Krista,

  Unfortunately, there is no step generator program that can add a contact to the canvas of the campaign of the Builder program. However, you could use to add it to the stage of the Contact Group in the program generator and then use this group Shared Contact list in a segment to fuel a campaign.

• How to fill out the "to:" line with a variable email address?

  I'm new to coding and am not sure how to ask my question. I have a link in an 'Email' symbol that I would like to have the window open to a 'mailto', but there are several instances of that symbol on the timeline, each using a different email address. If the [symbol]. Email.Click code reads as follows:

  Window.Open ('mailto:'+ sym.getVariable = ("emailWindow"), "_self")

  and the line in the Stage.creationComplete code that is supposed to call the variable code reads:

  sym.getSymbol("Details_David").$("Email").html ("[email protected]" "").setVariable("emailWindow","[email protected]");

  With this code, the browser opens a window of mailto, but the ' to: ' line readings, "indefinite".

  Either in the [symbol]. Email code. Click, I have:

  Window.Open('mailto:"emailWindow"',"_self")

  without the "emailWindow" as the variable name, the "to:" line to the mailto line reads, "emailWindow".

  How to fill out the "to:" line with a variable email address?

  Otherwise, it works better:

  1)

  replace

  sym.getSymbol("Details_David").$("Email").html ("[email protected]").setVariable("emailWindow", "mailto:[email protected]");

  with

  sym.getSymbol("Details_David").$("Email").html ("[email protected]");

• Combination of fields on the form to create a line of message and subject

  I have a few fields on my form I want to combine and create a line of message and the subject of.

  The fields are FirstName and LastName

  Using these two I want a topic saying something like "it's a form BLAH

  First name + name

  And something similar to a message on e-mail. As cc their email so that they get a copy of the form

  Is it possible

  Hello

  In my original example, I have a TextField object, called subjectLine. If your form does not have this object, then the script will fail, because Acrobat/Reader knows not what subjectLine is (for example, it is undefined).

  If you look at the original example, I want to build a subject line in the electronic mail using the TextField subjectLine. That's why I first test to make sure that the subjectLine TextField is not null.

  Where in your case you should be stable that FirstName and LastName is not zero, because these are the two objects that you use to create your subject line of the message.

  So for this part of the script, it's what I expected:

  // Check subject line field and extend error message
  if (form1.p1.subUserInformation.FirstName.rawValue == null || form1.p1.subUserInformation.LastName.rawValue == null)
  {
       errorMessage = errorMessage + "\n - please provide your first name and last name.";
  }
  else
  {
       vSubject = "Completed: Structure Change Form " + form1.p1.subUserInformation.FirstName.rawValue + " " + form1.p1.subUserInformation.LastName.rawValue;
  }
  

  Then the last script block checks all the options that are used to form the email and either send the email if they are all not null or gives the error message to the user:

  // If fields required for script are null, warn user and do not initiate email
  if (emailAddress.rawValue == null || form1.p1.subUserInformation.FirstName.rawValue == null || form1.p1.subUserInformation.LastName.rawValue == null)
  {
       xfa.host.messageBox(errorMessage, "Sending an email", 0, 0); // Send out a custom error message if any of these fields are null
  }
  else
  {
       // Everything is OK, send email
       event.target.submitForm({cURL:"mailto: "+ vEmail +"?subject=" + vSubject +"&body=" + vBody + vCC,cSubmitAs:vFormat,cCharset:"utf-8"});
  }
  

  Who is?

  Niall

• The case of the history of instant messaging and chat that disappears

  I use Skype desktop client on my Windows 7 pc with no problems for a long time. Since a few weeks back, I met a problem when connected: a message flashes on my screen and active become Skype icon in the taskbar, but when I go to the client computer, it does not display the message or any chat history. The text "see the messages of" is visible, but it's empty. The only way to receive messages is to have the sender of the specific group or contact highlighted in the application.

  Messages and history indicate with precision on my iPad version of Skype.

  I use the latest version of Skype (6.10) and I did not any changes to the settings of my story (forever).

  I ran the SkypeLogView.exe as suggested in previous conversations and it has not registered any historical cats since November 4.

  Please help me to restore the correct settings for the receipt of messages and to maintain history in the desktop client for now and in the future. I don't like lost history.

  Have you recently received a file named "invoice - pdf.exe" or similar?

  http://community.Skype.com/T5/security-privacy-trust-and/invoice-xxxxxx-PDF-virus/m-p/2057677#M23667

• The text of menus, messages and texts of dialog have been damaged in many of my programs.

  The text of menus, messages and texts of dialog have been damaged in many of my programs.  He seems to have taken place after the last update patch this last week.  I don't see in place and place menu commands, dialog texts, status messages are series of rectangles as a square off the coast of character "O".  Some of these programs include MS Office Applications, Adobe Reader, Norton AV.  It does not affect Internet Explorer.  Anyone know what this problem is?

  Have you run a registry cleaner program so-called?  If so, it is probably the cause of the problem.  If this is not the case, here are some things you can check.

  Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  Right-click on the header at the top of the list of messages and select from the list of options.

• I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  BabsMKE wrote:

  I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  settings - do not disturb - off

• In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

  In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

  0X8007000D ERROR_INVALID_DATA

  Try to manually download the update and installation
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

  It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

• tried to put the password on windows messaging and now can't open my email

  tried to put the password on windows messaging and now can't open my email

  Tried to put a password?

  Could you be more specific as to what you were doing.

  Try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• What opening of database Service of Cloud Computing console receiveing "the user role cannot access the Cloud database Service" message and see no service. Why?

  What opening of database Service of Cloud Computing console receiveing "the user role cannot access the Cloud database Service" message and see no service. Why?

  Thank you in advance.

  Try now

• Add text to the subject line of message

  Hello

  I am trying to add a menuitem to the menu change Email which should add a text at the beginning of the subject line.  I could add a menuitem to Email edit menu and was able to view the subject of the message using the provided RIM sample. However the subject line of the message does not show the text, I added.

  What Miss me?  Any help would be appreciated.

  Code of the MenuItem class example

  public Object execute (object context) {}
  context object must be an electronic mail message
   
  If (instanceof Message context) {}
  Message message = context (Message);
  message.setSubject ("Test Message" + message.getSubject ());
  Dialog.Alert (message.getSubject ());
  context.setSubject ("Test Message" + message.getSubject ());
  }
  return the context;
  }

  Once you have completed your changes, call the Message.updateUi method to update the display with the modified message.

• BlackBerry Smartphones Can not add more contacts to the address book

  Hello

  I have a blackberry curve 8520.

  for the momment I 288 contacts but I can not add more. I go to the menu, address book, new contact, the window give me options, I add the information (name, phone, e-mail, etc.) and when I want to save the contact he does not save

  I tried to restart the removing the battery for a minute and reboot, but always with the same problem.

  Also, I figured out that when synchronize my bb with Desktop Manager, the address book is not sync that it says (address book not installed) and this is why I can't drag contacts to reinstall the info because I don't have to return to the top of the address book

  Please I need help with this question

  Thank you

  While there is no limit on how many contacts you can have on your device, there is a soft limit that you can have as many times as the memory of your device can handle. Check the available memory to see if you have any remaining space. If this isn't the case, then consider cleaning out / uninstallation of some things that you don't need to increase the memory available to more contacts.