HP5740e all-in-one: Deputy HP5740e Print will not add wireless printer

Similar Questions

• HP Deskjet all-in-one: HP Deskjet 3520 will not print black, period

  OK, I've lost my WHOLE day, searched forums, has done what others have tried, poste posted HP Facebook, doing whatever is humanly possible to get my printer to print in black. I ran the clean printhead, black ink changed TWICE new cartridges, reloaded drivers, reset the default open to the top of the printer and tried to manually clean the head after only 4 hours to do everything I can possibly do to get this junk to print in black. The printer is only a year old and the cartridges are freshly bought from the store. So, tell me what am I missing or is the printer ready to be stoned?

  Hi @ChrisBird,

  Welcome to the HP Forums

  Looks like you've covered most of the steps, but I will propose always to have a look through this document printer prints blank Page or not printing black or color ink for HP Deskjet Ink Advantage and Deskjet 3520 e-all-in-one printer series to ensure that you have verified that the event on both cartridges.

  If this does not help still nothing and will not always be the black print, please call our technical support team and request a replacement printer. At THAT TIME, regardless of the warranty, they should be able to establish that the replacement for you. Otherwise, let me know and I'll do my best to help you with a resolution.

  The pleasure of you talk to soon!

• Printer HP Deskjet 3070 all-in-One - the IP address will not save

  Hello

  When I connect my printer to all-in-one HP Deskjet 3070 - B611a and try and update the IP address manually, it says it is in place and I press ok but nothing happen need me just indented on the same page but with the address IP is entered.

  The same things happen when I try the wizard he fines the Wifi network and accepts the wifi key tells me im change network, but then after that just takes me back to the first page of the wizard as nothing has happened.

  Almost as if it won't save or flash memory.

  Please help someone.

  Thank you

  Bryan

  Hello Odbod22

  By turning the printer power switch will usually change the IP address, unless make you it static or unchangable. The reason for routers use a protocol called DHCP that tells it how to distribute IP addresses. So, it is not uncommon that address to change. To avoid this, you must assign a static IP address on the printer.

  To do so follow the link below and search for "Step 6" how to set a static IP address.

  Printer keeps no connection Wi - Fi

• ALL-IN-ONE PHOTOSMART HP 5510 WILL NOT PRINT AFTER GO 'SLEEP' MODE

  My printer model:

  HP PHOTOSMART ALL-IN-ONE 5510 B111A

  Problem:

  Printer goes into sleep mode. After 25-30 minutes breaks the connection between the PC and the printer wireless. Beacon wireless is the same fashionable "sleep" and I see that the printer is connected to my router and there is internet connection. HP Print and Scan doctor sees the printer, but I can't wake the printer unless I restart it.

  What I've tried so far:

  I tried all the solutions offered hp.com; Reinstall driver, updating the printer software, setting static IP on the printer, static DNS servers, using HP print and Scan doctor.

  I've seen people questioned on this issue before and there is no solution. I really need help from HP!

  After days of research, the problem was finally solved! I applied the following steps below. Some steps may be unnecessary, I didn't waste my time knowing who.

  1. find your PC's DNS servers by typing ipconfig/all in CMD.
  2. assign a static IP address outside your DHCP range. For my Linksys router him between 192.168.1.100 to 192.168.1.150. So I put my static IP address as 192.168.1.20.

  To do this, click the button on your printer wireless. This will show the IP address of your printer. This type of your browser. Go/network/network address. Choose manual IP and write 192.168.1.20

  3 now come to section of the manual DNS server, and then type your DNS servers, you found before.

  4. open your HP printer program that must be installed with your driver. Utilities hit and update the IP address. Update your address with your static IP address.

  5. now go to your router settings. Find the wireless settings and change your not automatic standard 20 MHz radio band.

  6. change your standard channel to 6.

  7 find the wireless security and replace your WPA-personal security mode.

  8 disable UPnP

  9. This is the part of the KEY. Change the renewal of your key to 36000 seconds. (10 hours)

  10 go to the Windows Advanced Firewall. Enable all the disabled printer and share, entrants and outbond rules.
  I believe that the most important parts are affecting a static IP address outside your DHCP-range and change the key renewal time. I hope this works for you too

• OfficeJet Pro 6978 all-in-one: OfficeJet Pro 6978 / will not download drivers

  I just bought this printer Office Jet Pro 6978, All In One Printer.  It won't let me download the driver listed in the steps to implement, it fails every time.  I tried to use the CD that came with it, it gave me a message "this computer's operating system is not supported."   So this printer will not work on my 64-bit?  Or elsewhere?  My computer is a HP.  Where can I find a download driver for this printer for my operating system?  When it prints, it prints a nonsense.  % beginprolog % beginresource: file and so on with such things.  I am at a loss... Any help would be great.

  Hello

  Sorry, but the printer is not supported on Windows Vista 64-bit.

  64-bit support is only available in Windows 7 or later operating systems.

  You can find the printer specs below:

  Vista 64-bit is not supported.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6970-all-in-one-printer-series/8289585/model/11161264/document/c05061732/

  You must upgrade your operating system to a later version to use instead an OS 64 - bit, Windows Vista 32 - bit to insall or replace it with another printer, compatible with your operating system.

  Respect,

  Shlomi

• L7580: HP All In One L7580 - Scans but will not print or copy

  Last problem with the L7580: this machine will scan but not print or copy.  All four color cartridges are good, remaining.  He machine is not used as often as it should be, but copied and printed a few weeks ago.  Any suggestions?  Thanks for any help.

  Hi @kkpb,

  Welcome to the Forums of HP Support!

• HP Officejet 6700 premium all-in-one. The documents will not power automatic document feeder fax.

  I can send a fax from the glass, but when I try to fax multiple pages in auto document feeder it doesn't recognize, they are there and asks me if I want to fax the glass or ADF.  I click on ADF and says original place in the ADF, and press start.  I opened the compartment in front of the ADF and it is not stuck or dirty.  Help, please.

  Hi DLreportin,

  Thanks for the reply!

  In the software you wish to select Connect new printer. Not really sure why you were running the software again if I don't believe it was part of one of my suggestions.

  If I understand well after the steps of my above after you are still unable to make a copy through the ADF?

  Did you update the firmware, or connect the printer to the wall makes no difference?

  Please let me know it's going, and if you are still unable to copy after checking these two things and then I will consider a deeper reset for you.

• software and star driver hp psc 1315xi all-in-One extracts full but will not load on xp sp3

  Can not find a way to get this to install. After extracting I finally found it in running %Temp%. Searching through all files and folders, trying to find the exe file. to get it to autorun, but was unsuccessful. I tried to install this on 2 different PC with xp pro sp3 but no luck.

  The solution below is from michael323 here in the Forums of HP's Support.  Make sure that you send Bravo!

  I think I have solved this problem.

  I have a PC Windows XP Pro (SP3) who has been affected by this problem.

  Immediately after that the window of 'extraction' went to 100% and closed, nothing happened.  The windows install/never display software.

  Whenever I tried it creates a log file that started with this:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  # GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "

  System LangID = 1033.  mapped to ENU

  # The system language is ENU, but is not on our CD!

  There was other error messages after that, but they all come from lines 3 and 5.

  Something she prevented the installation program to recognize the language ENU files ARE present in this download.

  Comparing two PCs, a problem, and one that works perfectly, I saw that one who was not was AutoRun disabled through a registry setting.  I temporarily deleted this registry on the PC that wasn't and Setup launched and ran like he was supposed to.  Here are the first of this log from the same PC, a few minutes later, where the only difference was that I had removed the registry setting criminalized:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  System LangID = 1033.  mapped to ENU

  We use the system of language = FRA, which is located on our CD!

  As you can see, the message "(LanguagesInthisCD) failed" (line 3) disappeared, and the line 5 (now line 4) shows that it has to recognize that the language ENU installation files are present.

  So if you encounter this problem, and you are comfortable with the system registry, here is how I got it to work on my PC:

  Start regedit
  Navigate to the bottom of this tree
  -HKEY_LOCAL_MACHINE
  -SOFTWARE
  -Microsoft
  -Windows NT
  -CurrentVersion
  -IniFileMapping
  Below, find out if there is a key named "Autorun.inf".
  On my PC (the one with this problem) the value of this key has been "@SYS: nexistepas".
  If your registry database also has this, it may be the cause of your problem.
  In the left pane of regedit, do a right click on Autorun.inf and select "Rename" from the context menu.
  Change the name to something like "Autorun.inf.hold".
  Close regedit
  At this point, I restarted my PC, but I don't know if it is really necessary.
  I ran the downloaded driver file.  It extracted, and the Installer started out as it was supposed to.

  When it was done, I returned in regedit and renamed "Autorun.inf.hold" to "Autorun.inf".

  It is extremely frustrating for me, and (if you need it), I hope that this solution works for you.

• HP PSC 2355 all-in-one: HP PSC 2355 will not recognize Windows Vista Home Basic

  I bought this product in 2005. I'm just out of the box yesterday. The printer works fine. The software CD was made before Windows Vista Home Basic Edition. He acknowledges only 98, Me, 2000 and XP. He calls a Unknown600 to Vista. Is there a driver or other update I can use? Thank you.

  Hi @Mc_Cool,

  Welcome to the HP Forums!

  I noticed that you are looking for a basic Windows Vista Home Edition driver for your HP PSC 2355. I'm happy to help you!

  You can download the driver directly using this link, HP full feature software and drivers.

  Hope this is what you are looking for and have a great day!

  "Please click the Thumbs up icon below to thank me for having responded."

• 5742 HPOficejet e-all-in-one: retain default printer Fax and Photo paper tray

  Hello.

  The printer keeps failing for FAX and paper in the photo tray.  How can I fix this in windows Vista?

  Hello @Vanessa3,

  Welcome to the Forums of HP Support!

  I understand that when you print from your Windows Vista-based computer to your HP Officejet 5742 e-all-in-one printer the screen 'Fax' is popping up and the incorrect paper tray / support is selected. I would like to help you today to address these issues. If the "Send faxes" window appears only when you print to a specific program, there is probably a setting must be adjusted under this specific programme. If this is the case, what program are you a victim of problems when printing?  If the 'Send of Fax' window is popping up under all programs that you print from your computer, it is likely that the wrong printer is selected as the default printer in the printers and devices window. Can I please you follow the steps below to fix this problem.

  Set the default printer:

  1. Click on the Start menu
  2. Select the devices and printers or Printers (you may need to access it via Control Panel)
  3. Under the Printers folder, locate your HP Officejet 5742 e-all-in-one. This printer should display a green check mark above to indicate that it is the default printer.
  4. If your Fax-HP Officejet 5742 e-all-in-one shows like check mark on this subject, please right click on HP Officejet 5742 e-all-in-one (printer) and left click on "default".

  Once the correct printer has been confirmed as the default printer please test print to confirm that the 'Fax' problem is solved.

  Once solve us the problem of Fax, we will be able to adjust your print settings to confirm that your printer is configured to print on the correct paper and with appropriate support tray.

  How to check the paper tray settings:

  1. Click on the Start menu
  2. Select the devices and printers or Printers (you may need to access it via Control Panel)
  3. Under the Printers folder, locate your HP Officejet 5742 e-all-in-one
  4. Right click on the HP Officejet
  5. Left click on Printing Preferences
  6. On the paper/quality tab, make sure that the Paper Source is set to main tray
  7. Also, ensure that the media is set on plain white paper (if that's what you print on)
  8. Click apply and OK
  9. Close the Printers folder
  10. Try to print a document to confirm that your HP Officejet prints from the correct tray.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• -What is the HP Officejet 7310 all in one able to print wireless

  -What is the HP Officejet 7310 all in one able to print wireless

  What operating system?  If Windows and with the printer connected to the router via Ethernet, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• V525W printer will not connect wireless

  I just moved and had to change my ISP.  Now, my V525W printer which was working fine, will not connect wireless.

  When I try to reinstall the printer, the program stops after I connect the USB "put in place by cable".  The CONTINUE button dark rest.

  I tried every suggstion I find on the Board for more than three hours and still not get this piece of junk to work.

  I have an all-in-one Dell XPS running Windows 7 machine.

  Can someone please?

  Rick,

  After a few "cooling off" days, I decided to TANOE this problem again and it seems that I finally work!

  I went in the menu on the printer and restore the default settings.  I always had the same problem with the Installation of the Dell program I went into the Windows 7 Control Panel and clicked on "Add a wireless device to the network."  He immediately recognized the printer and I followed the steps until the light green enabled WiFi fixed.   Then, I went through the installation of Dell again and was able to print, scan, etc.

  Thanks again,

  Tom

• why I can't take a new picture and I can't remove all the images of photos.new will not be saved

  why I can't take a new picture and I can't remove all the images of photos.new will not be saved

  Check your storage space on your iPhone, iPad and iPod touch - Apple Support

• All of a sudden Photoshop CS6 will not grant me ability to save. How to fix this annoying problem.

  All of a sudden Photoshop CS6 will not grant me ability to save. How to fix this annoying problem.

  Please check and make sure you have read and access on the folder where you want to save the file for writing.

  How to give permission: OS X El Capitan: set permissions for items on your Mac

• I have Lightroom on my iMac and MacBook Air, I just new MacBook Pro, all migrated to Pro air but will not work Lightroom until I have disable it on the Air.  HOW CAN I DO THIS?

  I have Lightroom on my iMac and MacBook Air, I just new MacBook Pro, all migrated to Pro air but will not work Lightroom until I have disable it on the Air.  HOW CAN I DO THIS?

  There is no such thing as disabling Lightroom 5.7. Just uninstall the software.

  Looks like you have installed 6 Lightroom on two of your computers (including the MacBook Air). In this case, you must find and launch Lightroom 6 (not Lightroom 5.7 or any other version of Lightroom 5) on the MacBook Air and then in the menu help, select logout.