Add agent dsccreg issues

Similar Questions

• Unable to add agents to Exchange and active directory fglam

  I'm having issues getting the announcement and exchanging cartridges to add new agents. The Exchange and the advertising agent package has been properly deployed. However, when you try to add and configure new agents, errors will prevent the installation of the future.

  I get the following error whenever I try to install Exchange followed 5.6.3.1 agent version.

  "Access error to the mydomain.com with the supplied user name and password: javax.naming.CommunicationException: mydomain.com:389 [root exception is java.net.ConnectException: Connection timed out: connect].

  I confirmed usernames are correct and work passwords and user account has access to connect to Exchange and to perform operations.

  I opened all the ports required by the installation docs and Foglight requirements. The network between the FMS and fglam boxes and Exchange are on opposite sides of a firewall.

  I fear that port 389 is not yet open, and I was wondering if anyone has experience with the exchange connection and agents of the AD through the firewall. If so, what has been your experience?

  Thank you

  A number of things I've noticed in the past:

  1 make sure that the machine/machine virtual fglam is running have enough memory for the fglam create agents.

  2. for AD and exchange please check the release notes for these agents, especially when AD/Exchange running on Windows 2008 R2, there are a lot of prerequisites to allow agents to collect data.

  3. If you did the pre requirements, I saw cases where it took a long time for the system to respond. In these cases what I usually do, is go to administration > dashboard status agent and change the properties of the agents. I give the connection timeout, a very high value (typically, I add a few zeros to the number that is there).

  In addition, if you check the edocs you will see both for AD and Exchange there is a troubleshooting section and a guide to diagnosis remotely.

  http://eDOCS.quest.com/Foglight/565/files/RemoteAccessDiagnostics_Guide.PDF

  There is also support solutions to talk about troubleshooting problems

  https://support.quest.com/SolutionDetail.aspx?ID=SOL76251&PR=Foglight

  https://support.quest.com/SolutionDetail.aspx?ID=SOL74226&PR=Foglight

  https://support.quest.com/SolutionDetail.aspx?ID=SOL70765&PR=Foglight

  If it still does not respond, please open a case of pension.

  Golan

• Add to playlist issue

  In the Safari menu, click bookmarks > add to playlist does not work. Nothing happens. The keyboard shortcut does not work either.

  Any ideas?

  Works for me using Safari 9.1. Have you tried a different user account or safe mode?

• ACS 4.2 Remote agent compatibility issues.

  I did a little reading on the compatibility of remote ACS 4.2 with Windows 2008 R2 agent, and it seems that the only way out is to upgrade the ACS to 5.2. We have Cisco ACS 4.2 SE and I would like someone to confirm that I have installed what happens if the remote agent on a Windows 2003 server of Member rather than the 2008 R2 domain controller. Such a scenario will work?

  Comments are appreciated.

  Concerning

  Yes, here's what a bug documented with this CSCtg37183 information:

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtg37183

  Excerpt from the previous link:

  ACS 4.x does not support the Server 2008 R2 to AD.

  Symptom: ACS 4.x does not support authentication to a back-end Server 2008 R2 Active Directory. Conditions: ACS 4.x Windows Server 2008 R2 installed on the domain controller ACS or remote agent installed on a member server in the environment (even if the Server 2003/2008) Workaround solution: Install the ACS or the Remote Agent on a domain controller 2003/2008

  Cisco does not support this scenario because sometimes work well other doesn't work at all, so nobody wants an unstable network right, unfortunately workaround doesn't help much. Although there is an ACS 5.2 trial version that you can test, let me know if I can get you the links.

• How to add agent in OEM11g after it has been deleted.

  Is there a way to OEM 11 g to discover all targets running on a host computer after the agent has been removed?

  The officer was removed from running the script of cleaning agent:

  SQL > exec mgmt_admin.cleanup_agent (' < nomhote.nomdomaine >: < port > ');

  EM 11 g, you can simply reset the agent and must reload the targets.

  emctl security officer

• Re the upgrade of agents to issue 12cR3

  I hope that I can ask this question clearly.

  I upgraded my installation 12cR1 to 12cR3 OEM and have improved also with success of most of the agents. My question-

  The Agent Upgrade console shows a couple of agents who are not upgraded because the latest version of the software agent is absent. They are Oracle Solaris on SPARC (64-bit) and the version of the agent is 12.1.0.1. The remedy is to go to the screen to auto update. When I'm here under software Agent, I see that the Oracle Solaris on SPARC (64-bit) is here with the State applied. I think I should download the 12.1.0.3 agent, is that correct?

  When I choose the Oracle Solaris on SPARC (64-bit), the download button is grey so I don't have the possibility to download it. Must I first remove it in order to download the 12.1.0.3 agent? If I do should I be wary where are there consequences?

  Thank you.

  Bill Wagman

  Hi Bill,

  I would follow the steps in the mnazim link you gave, I hope that those who will work.  The steps in offline mode should also succeed. If you want to check on your library, go to the menu of configuration Provisioning and patch, then software library, and the table displays on the screen will show how much space is available for the software library total and how much space is free.

• Health HQ-&gt; Agents tab issue with FULL domain name

  When I go to the HQ health-> Agents tab, I see some of my platforms have the FULL domain name noted quite rightly hostname.domain.com (or other). However, some of them only the IP address of the list and have no FULL domain name. I checked and these IP addresses do not have matching PTR DNS records, so I don't know why this should happen.
  
  Can someone tell me why this is happening?
  
  Hyperic entering these data? It does not appear to conduct research at the time the listing agent is created. Maybe when the platform is created? If so, how I would solve this? Can I just update a column in the database with the correct information?
  
  Thank you
  Brian

  Opps, I forgot a

  Platform.Name =
  Platform.FQDN =

  Unfortunately, I don't remember if the agent should be reconfigure (clear data directory and redemarrees) or not.

• "dsccreg add-server" translates to "DSCC Agent not found"

  Hello

  I have set up two servers, 'ldap1' and 'ldap2', the two 7-Department (11.1.1.7.0) running with DSCC configured on ldap1.  On ldap1, the DSCC agent runs:

  root@ldap1:~#/opt/dsee7/bin/dsccagent info - v

  The instance path: / opt/dsee7/var/dcc/agent

  Owner: root

  JMX port: 3997

  SNMP port: disabled

  Status: running

  PID: 25898

  DSCC hostname: ldap1.utica.edu

  Port not secure from DSCC: 3998

  Port secure DSCC: 3999

  The instance version: A - A00

  I was able to save its own DS to DSCC instance by running the following:

  root@ldap1:~#/opt/dsee7/bin/dsccreg server add - v h ldap1.utica.edu h ldap1.utica.edu d ldap1-dsins1/var/opt/dsee7/dsins1

  Enter the password of the administrator DSCC:

  DSCC administrator password is OK

  Creation of trust cert

  Create the KeyStore file OK; try to connect...

  / var/opt/dsee7/dsins1 is an instance of DS

  DSCC administrator password is OK

  Creation of trust cert

  Create the KeyStore file OK; try to connect...

  Agent no. Hostname Port owner iPath

  --------  ---------------  ----  -----  ------------------------

  0 ldap1.utica.edu 3997 root/opt/dsee7/var/dcc/agent

  The recording will be use DSCC agent on port: 3997

  Enter the password of "cn" = Directory Manager for/var/opt/dsee7/dsins1:

  This operation will restart/var/opt/dsee7/dsins1.

  Do you want to continue? y (y/n)

  Connection to/var/opt/dsee7/dsins1 (via ldap://127.0.0.1:389)

  Allowing the DSCC access to/var/opt/dsee7/dsins1

  / Var/opt/dsee7/dsins1 restart

  Registration/var/opt/dsee7/dsins1 to DSCC on ldap1.utica.edu.

  You are looking for an entry "cn=ldap1.utica.edu@/var/opt/dsee7/dsins1,cn=Servers,cn=dscc".

  However, when I try to register the instance of DS on ldap2 with the DSCC instance on ldap1, I get the following:

  root@ldap2:~#/opt/dsee7/bin/dsccreg server add - v h ldap2.utica.edu h ldap1.utica.edu d ldap2-dsins1/var/opt/dsee7/dsins1

  Enter the password of the administrator DSCC:

  DSCC administrator password is OK

  Creation of trust cert

  Create the KeyStore file OK; try to connect...

  / var/opt/dsee7/dsins1 is an instance of DS

  DSCC administrator password is OK

  Creation of trust cert

  Create the KeyStore file OK; try to connect...

  No agent DSCC found

  / var/opt/dsee7/dsins1 has not been saved to the DSCC on ldap1.

  Running on ldap1 tcpdump showed that connected to ldap1 on port 3998 ldap2 and there were 51 packets exchanged between these two hosts before ldap2 showed the mistake found no. DSCC agent and abandoned the attempt.  So at least I know that it is not a network problem.  I restarted the DSCC agent on ldap1 several times, but he has not made a difference.

  Anyone know what could be the problem?

  I finally solved the problem.  I needed to create a DSCC agent on the 2nd Department (ldap2) server and point it at the DSCC (ldap1) host:

  root@ldap2:~#/opt/dsee7/bin/dsccreg add-agent - v h ldap1.utica.edu/opt/dsee7/var/dcc/agent

  HostName: ldap2.utica.edu

  Agent path: / opt/dsee7/var/dcc/agent

  Enter DSCC agent "/ opt/dsee7/var/DCC/agent" password:

  Download the config file

  Representative is not already registered; check the password for agent instance

  Password agent instance OK

  Enter the password of the administrator DSCC:

  DSCC administrator password is OK

  Creation of trust cert

  Create the KeyStore file OK; try to connect...

  Try to register the agent:

  Agent port: 3997

  Agent user name: root

  Host name: ldap2.utica.edu

  Instance of agent registered in DSCC; update the agent config file

  Update configuration file:

  Agent/opt/dsee7/var/dcc/agent configuration file updated with:

  Host name of registry = ldap1.utica.edu

  Port of registry = 3998

  Secure registry 3999 = port

  Agent instance was recorded at the DSCC ldap1.utica.edu

  You can now run dsccagent start to start the agent

  root@ldap2:~#/opt/dsee7/bin/dsccagent start

  The/opt/dsee7/var/dcc/agent agent started

  Once this is done, the DSCC registration worked well:

  root@ldap2:~#/opt/dsee7/bin/dsccreg server add - v h ldap2.utica.edu h ldap1.utica.edu d ldap2-dsins1/var/opt/dsee7/dsins1

  Enter the password of the administrator DSCC:

  DSCC administrator password is OK

  Creation of trust cert

  Create the KeyStore file OK; try to connect...

  / var/opt/dsee7/dsins1 is an instance of DS

  DSCC administrator password is OK

  Creation of trust cert

  Create the KeyStore file OK; try to connect...

  Agent no. Hostname Port owner iPath

  --------  ---------------  ----  -----  ------------------------

  0 ldap2.utica.edu 3997 root/opt/dsee7/var/dcc/agent

  The recording will be use DSCC agent on port: 3997

  Enter the password of "cn" = Directory Manager for/var/opt/dsee7/dsins1:

  This operation will restart/var/opt/dsee7/dsins1.

  Do you want to continue? y (y/n)

  Connection to/var/opt/dsee7/dsins1 (via ldap://127.0.0.1:389)

  Allowing the DSCC access to/var/opt/dsee7/dsins1

  / Var/opt/dsee7/dsins1 restart

  Registration/var/opt/dsee7/dsins1 to DSCC on ldap1.utica.edu.

  You are looking for an entry "cn=ldap2.utica.edu@/var/opt/dsee7/dsins1,cn=Servers,cn=dscc".

• Agents DSCC certificates

  Hello

  the certificate used by the DSCC agent version ODSEE 11.1.1.7 (.1) is a certificate self-signed with valid time for 2 years.

  I can't find any documentation about the renewal of this certificate or to use an official signed by our own CA cert in our society. Or is this auto-renewed?

  Does someone of you can give me a hint?

  Thank you

  Roland

  
  

  Hello

  I think that ADS does not check DSCC agent certificate expiration, so this should not affect operations.

  It is possible to use an official certification, but this is not documented. You essentially have

  -create the agent (create a dsccagent).

  -Locate the keystore of jks containing the self-signed certificate of agent.

  -use keytool to replace the self signed cert with the official (make sure you use the same alias cert)

  - then save agent (dsccreg add agent)

  -Sylvain

  ------

  When closing a thread as answered don't forget to mark the messages correct and useful to make it easier for others to find their

• How can I change the password for Agent DSCC on ODSEE 11.1.1.7?

  Hello

  Someone at - he met how to change the password for the DSCC Agent? I found not yet all orders that allows it.

  Mohammad

  Hello

  Sylvain, the links you give are not 11.1.1.7 for previous versions.

  There is no CLI to change the password of DSCC agent in 11.1.1.7. As agent DSCC has no data, I suggest to delete and recreate your agent by using the following path:

  • dsccreg remove-agent
  • dsccagent delete
  • create a dsccagent (use the same port as before)
  • dsccreg add agent

  No change on the servers of DS/DPS is necessary (no new registration...), if you keep the same port.

  It will be useful,

  Carole

• Blocked Agent error OEM12c

  Hello world!

  I recently installed oracle database 11g and oem12c on a new server.  (both installed on the same server)  I know very little about oracle products, but I finally found it.  Now, I'm trying to get an agent deployed.  I understand now that there was already an agent installed to the db itself, but I didn't know that at the time, so I have deployed another which was probably a mistake.

  The original repertoire of the agent is always there as well as on the other that I deployed.   I'm ok with fixing any of these agents or wipe both outside and the deployment of a new.  What is the easiest thing to fix my errors?

  For the moment, I have the newer agents running.  It starts fine when I run "emctl start agent.  But OEM complains.  It is said:
  Agent is currently blocked. He will not be able to download alerts or metrics to the Service (OMS) management Oracle data until it is unblocked manually. Please ensure that all a bad Agent configuration issues have been resolved before the release of the Agent.

  I tried to click agent-> Resync I've seen suggested online.  It did not help.
  Here's what emctl status says:
  [oracle@oem101 bin] $. / emctl status agent
  Oracle Enterprise Manager Cloud control 12 c Release 3
  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.
  ---------------------------------------------------------------
  Agent version: 12.1.0.3.0
  The WHO's version: (unknown)
  Protocol version: 12.1.0.1.0
  Home Agent: / u01/app/agentOEM12C/agent_inst
  File binary agent: /u01/app/agentOEM12C/core/12.1.0.3.0
  Agent process ID: 6873
  Parent process ID: 6806
  Agent URL: https://oem101.xxxxxxxxxx.com:3872/emd/hand /
  URL of repository: https://oem101.xxxxxxxxxx.com:4903/empbs/upload
  Starts at: 2014-04-22 14:02:24
  Started by user: oracle
  Last charging: (none)
  Last download successful: (none)
  Last attempt to download: (none)
  Total megabytes of XML files uploaded so far: 0
  Number of XML, files awaiting download: 106
  Size of the XML files in the upload wait (MB): 0.21
  Available disk space on the file upload system: 57.90%
  Collection status: activated Collections
  Pace heart status: Agent is blocked
  Blocked reason: mismatch between the agent and the repository Plugin. Please perform a resynchronization of the agent to unlock the agent. Not match plugins: [plugin is oracle.sysman.emas
  Last heartbeat to WHO attempt: 2014-04-22 16:02:31
  Last pulse successful who: (none)
  Then, at the request of the heart rate to WHO: 2014-04-22 16:05:31

  ---------------------------------------------------------------
  Agent is running and ready

  Clearly, he wants me to resync, but I did it from the user interface and the error has not changed.  Any ideas?  Again, I'm cool with the fixer or remove (don't know how to do it well) and the deployment of a new.

  Advice to help would be greatly appreciated.

  You can connect a SR with support so that they can help diagnose and solve this problem, or (as you do not mind) you can uninstall the 12.1.0.3 agent, remove its directories and redeploy the agent on the host computer.

  Related documents:

  Uninstalling Oracle Management Agents

  Installing Oracle Management Agents

  Kind regards

  -Loc

• Agent licenses VC - why Vmware only want our money?

  I have a strange question:

  -We have VMware ESX-es (ESX, ESXi, incorporated ESXi) some for free, some coming with DELL on flash,.

  3 installed as a foundation of Vmware.

  -We have VMware VC put Center to level toward the comprehensive Center (sales we sent a file, we applied and now have full VC) and 6 license agents.

  Now, we are looking for a way to add licenses more agent so we can monitor all our free and embedded ESXi-s and ideally to monitor our 2 Server2.

  Problem is that it is, hmm, impossible.  I can't believe, but Vmware sell VC agent licenses and do not sell licenses to add value to their products free.

  I don't need to licensing additional infrastructure VI - I already run VC and do not need more.

  I don't need starter packs - I already had one, and now I run.

  I just want to pay a reasonable amount of money, $100 - $300 per server and add the server in VC. I want to be able to pay a reasonable amount of money and add little in VMotion and HA. I want to pay a reasonable amount of money and add the backup when I need (no need to the IRB because I have NetApp and backup just snapshots NFS).

  So, we are ready to buy. Buy license agent single host license HA of single host, single host... But we are not willing to pay for the things that we do not have (infrastructure VI) we already have.

  So, how can it be? How Vmware is making money, if you can't even pay for the existing productis you need (no technical limitation)? How can I add agent licenses so that I can manage our systems 10-15 Vmware (ESX * and server *) but still have systems themselves on the permitted range of drive (we cannot risk with the centrallized license server, no way!).

  (What is interesting - if we can't pay, we just go around and reconnect VC to the ESX-are different to the need, one at a time.)  But this means that VMware, Yes, never got our money. They have a great product, one of the best in the world. And they have a very poor sales, the worst in the world).

  Why I can't find something like this:

  -upgrade center foundation VI in the center of VC data center - $$$

  -1 additional agent license - $$$

  -1 additional license for the Server2 - $$$

  -10 licenses pack for the VC - $$$

  -ESXi integrated fully licensed (backup, vmotion, etc.) - on the site of Dell - $$$

  I missed something on their site?

  (You can buy DELL ESXi, only $99.) But it is very difficult to know about DELL, and it is not easy to start. And Amadou add a bit of $$ and connect it to the VC & lt; unless you're still inside the licenses of initial VC.).

  Virtual infrastructure licenses and licenses for Virtual Center are two different things.

  Virtual Center license lets you run Virtual Center.

  Virtual INfrastructure license, allows to manage the ESX (i) server through your VC.

  The type of license VI (Starter/standard/enterprise) will define the options that you can use.

  You can register each host separately, but some options require a central license server.

  The $99 Dell ESXi, that's what they ask for a USB stick theyput ESXi on (which is pretty easy to do it yourself for much cheaper), what you pay extra to be able to manage that ESXi with VC, is actually a license VI.

• Flex structural issues

  Hello

  I am in the planning stage of a new project and am not an expert in flex (I plan a consultant), but I try to understand if Flex is the right tool for the job.

  Basically, the system consists of 5 modules, each with 10 to 20 questions. Each question consists of a streaming video and then a multiple choice question. The system must track the results of each question and then write the result in the database at the end of the module. Is Flex the right tool for this? Second, I want to be able to add/edit new issues and/or videos easily - what is the best way to structure this (you don't need to be too specific, I just plan it)? I guess that I would have some sort of XML file external that contains questions and a reference to the relevant .swf or .flv video file and another file maps the questions about the modules - makes it his right? I guess that the SWF, flv and xml files would all work with a php script allowing to save results to the database for logged in users? Any help or advice on the structure of this would be much appreciated :-)

  I also understand, Flex can exit projects for either web or use offline (via AIR (I think), but if we create a full application based on the web with flex, including an interface with a Mysql database, can we then export an offline version too, without creating new things? Sorry if this is a stupid question, I'm a beginner an intention to hire an expert Flex if we decide to go with it.

  Thanks for your help,

  Dave

  Flex is an excellent choice for this system.

  Regarding the best way to structure the application, you alluded with modules, and this would be the way to go. You could an XML file so that it contains the questions, or you can store the data of the question in the database as well.

  You can simply use PHP as middleware between the user interface and the database, or you might consider Zend, WebOrb, and Coldfusion.

  You can create a Flex application for the web and an AIR application for offline use, but there will probably be differences even between apps, so no, you won't be able to write an application and use it online/offline.

  Both applications share a lot of code, but AIR apps allow you greater freedom take advantage of the office, so use it to your advantage, but the application of sharing codes, with classes and the custom components in the architect.

  If this post answers your question or assistance, please mark it as such.

• See 5.2 - sysprep breaks redirect USB

  Just a quick note in case no matter who else goes through.

  My clone related (Windows 7 Pro 64-bit) deployment process looks like this:

  Install/update applications that I need on my main image (the virtual machine is not joined to the domain)

  The VMware tools update and the Client to display for the new versions

  The machine for a new virtual machine clone

  Run sysprep on the clone (mainly to get the admin profile copied into the default profile for new users - the 'right' way to do it under Windows 7)

  Join the clone to the domain and log in to get GP to run (adds printers, ScriptLogic agent etc.)

  Stop the clone, snap it and use it as my base image to deploy my clones (using quickprep)

  Everything good, work great for a year and then I've upgraded to 5.2. As soon as I did it, redirect USB stopped working. VMware USB devices in Device Manager show 'work' and there is no errors will connect to the event. In the view of a zero client logs customer, I see this:

  28/03/2013, 07:06:29.688 > RC LVL:2: 0 SOFT_USB: usb_urboip_process_plugin2: connection of device USB\Vid_013fd & Pid_0842 (device_handle 0 x 00000403)

  28/03/2013, 07:06:29.688 > RC LVL:1: 0 SOFT_USB: VHUBLIB (error): doesn't have a handful of device virtual plugin: 01013CC8, error: 0 x 1

  28/03/2013, 07:06:29.688 > LVL:1 RC :-500 SOFT_USB: usb_urboip_winif_vhublib_plugin_complete_cback: deferred plugin failed (9)! (device_handle 0 x 00000403)

  28/03/2013, 07:06:29.688 > LVL:1 RC :-500 SOFT_USB: usb_urboip_winif_plugin2: Vhublib_PluginDevice failed (9)

  28/03/2013, 07:06:29.688 > LVL:1 RC :-500 SOFT_USB: usb_urboip_process_rx_buffer: PLUGIN2 treatment failure

  Thought it might have been a failed upgrade to view customer, so I went back to my master (non-Sysprep image) and re-directed the View Client installation. Any help - deployed again and still no USB. A decided to eliminate some steps and published my master (non-Sysprep) machine in a manual pool. Connected by a zero client and USB worked.

  To make a long story - and four hours on the phone with VMware support - shorter, looks that sysprep breaks USB redirection with the 5.2 client. We don't know why, but if I reinstall or repair the Client View after you run sysprep, it is fixed. I have a file of unattended installation of dead-simple sysprep that adds two or three user accounts, tells sysprep to copy the admin profile the default profile, sets the language and license keys, and that's all. Nothing for devices (no new analysis full PnP), just a "generalize" and "/ oobe" on the command line. But even with these settings simple redirection failure.

  Support will try to repro the problem in the lab, but I thought I'd post it here in case someone else is going through the question.

  Geoff

  Hi Geoff

  We saw some people with similar problems. We believe that there may be a problem when the upgrade is made of an earlier view. In your original post you mention:

  "If I reinstall or repair the Client View after you run sysprep, it is fixed. Did you reinstall/repair the agent rather than the customer? All the problems that we have investigated were caused by agent side issues rather than the client's problems.

  I was wondering if you could try something to see if that fixes the problem.

  After you get your agent to the required version of view, but before performing the operation of sysPrep. Please first confirm that the agent works for USB redirection. In order to solve the problem, you are facing here are one of 2 ways to do this. One way works for some people, and another works for others. Would appreciate feedback on your results.

  before the command sysPrep but confirmed USB redirection works;

  Method 1: (which does not work for some, not all)

  1. go to Device Manager and remove the 'VMWare View virtual USB Hub' device.

  2. right click in the Device Manager and look for changes on the hardware. This should re - install the latest version of the driver vhub.

  3. restart the agent

  Check now if USB still works and try again your sysPrep as before.

  Method 2: (once again before the sysPrep operation)

  1 find the machine for "vmwvhub.sys." There are several versions found, including C:\Windows\System32\drivers\ and c:\Windows\System32\DriverStore\FileRepository. The version stored in C:\Program VMware View\Agent\bin\drivers\should be the latest version for your installation of the agent. (probably 5.5.0 xxxx)

  2 remove instances of these files that have one version other than the most recent 5.5.0 build-949580. The former display drivers will probably be a version 5.1.0 build-668184.

  3. now restart and confirm functions yet USB. The driver loaded in Device Manager must be a 5.5.0.

  Now try the operation of sysPrep.

  Let me know if one or the other of these work for you,

  Kind regards

  Peter Brown

• DigiCert

  GOT THIS today as soon as I started FF26.0 on my laptop XPsp3:

  Is the play or I'm infected? 118000 byte of somethings 'feel' wrong?

  my homepage is ' subject: cache.

  Thank you, Ricardo Fri 19:40 it IS 06/06/14

  Anon & id = 5391fd31 & uri =http://ocsp.digicert.com/ 471 octets 1 2014-06-06 12:51: 05 2014-06-12 10:47:19

  Anon & id = 5391fd30 & uri =http://ocsp.digicert.com/ 471 octets 1 2014-06-06 12:51: 05 2014-06-12 09:06:13

  https://addons.Mozilla.org/blocklist/3/%7Bec8030f7-c20a-464f-9B0E-13a3a9e97384%7d/26.0/Firefox/20131202182626/WINNT_x86-MSVC/en-us/beta/windows_nt%205.1/default/default/91/642/1/ 118009 octets 1 2014-06-06 12:51: 06 2014-06-06 12:51:05

  Anon & id = 5391fd2f & uri =http://ocsp.digicert.com/ bytes 1100 1 2014-06-06 12:51:05 2014-06-12 11:09:53

  118000 byte file that you are talking about is the blocklist.xml file.

  • https://support.Mozilla.org/KB/Add-ons-cause-issues-are-on-blocklist

  Digicert items show you are on verification of SSL certificates invalid via OCSP (Protocol Online Certificate Status Protocol)