Add MD1200 to PE R420

Similar Questions

• Hot-add MD1200 pregnant to a storage of MD3600f running system?

  Hello

  I have a storage system with a MD3600f and two boxes MD1200. Now, I want to add a MD1200 more. I can do without turning off the system?

  Kind regards

  Hello salazar35,

  With the series MD3xxx of units when you add an additional speaker for the MD3xxx system & all MD1000/1200 must be powered off before adding the new case. If the new case is added, while the system is installed the new case is not seen until that controllers were restarted in the MD3xxx system.

  Please let us know if you have any other questions.

• Add existing MD1220 MD1200

  Hi, I have MD1220 in place and I would like to add MD1200. Is that possible or it must be MD1220? Thank you...

  You can add a daisy chain out of a MD1220 MD1200. Depending on your raid controller, you can make this hot (on-the-fly). With the PERC H800 or H810, you can add it on the fly. If you use a non Dell raid controller, you can add it without doubt on the fly, but it's something you want to check with the manufacturer of raid controller.

  If your MD1220 is fixed on a storage type MD3200 SAN solution, you may need to anticipate downtime to add a new box.

• Can I extend my MD1200 RAID6 configuration?

  Hi all

  I have a PERC H800 and MD1200 RAID6 would be on a PE on Windows Server 2008 R2 x 64 2970.  Currently I have 8 disks SAS of 2 TB, but 4 locations open and would like to extend.  Is it as simple as the addition of 4 disks? After saving the data, of course...  Any help appreciated.

  You will need to do is install Open Server to manage the server administrator. Which may require a reboot. Then put the new HDD and inside the OMSA you can go to the virtual disk and select this option to reconfigure. It will allow you to select the new drives to add to the VFD. Once this process is complete, you will need to use a utility such as diskpart to actually extend partition on windows. Also, as you mentioned, it is essential to ensure that you make a backup prior to this process, just to be sure. Please let me know if you have other questions I would be happy to help you.

• Problema al add UN nodo adicional al Cluster Windows Server 2012 con VMware Workstation 9 en

  Hola Buenas,

  Ante todo decir este are a Québec fallo he revisado y las responses in different los don't post han well para help me, good os.

  El caso are that I have 2 servers DELL PowerEdge R420 fisicos identicos, cada uno con ellos 3 VMs sober instaladas VMware Workstation 9. The first virtual machine are an image of Kerio control, a second virtual machine to Windows Server 2012 con dominio Controladora, is the third VM con WS2012're donde quiero crear el cluster con dominio usuario. ESTOS servidores knew vez esta una cabina data via iSCSI connected.

  Add tambien when performed the tests of validation led Cluster, todo lo tengo OK. El caso are so creo el cluster con el Nodo 1 y 2 Nodo (sugar Québec cada uno fisica Máquina distinta ellos y bajo mismo Dominio) me error UN da has the el crear hora cluster. In cambio, if creo el Cluster con este nodos if any to crea, pero el fallo viene a hora of connect UN nodo adicional (ya sea o 1 Nodo Nodo 2). Este fallo viene cuando el nodo TR checks are completely funcional in el Cluster, is is "pensando" y da fallo por tiempo sold.

  He revisado problemas similar y he visto that el antivirus can be una causa e caso no lo're are only aun no he wont any AV... There comprobado red devices (utilizamos 4, 2 iSCSI, 1 red LAN y otra heart rate), he desactivado los red el protocolo IPv6 devices, he probado connect los nodos con el Kerio Offline, el desactivado firewall of Windows, exportar components del registro TCPIP6, capture las conexiones iSCSI...

  El cluster is as en Máquinas Office instalacion del WS2012 y is ha hecho manera person, no mediante VMWare del injerto.

  Una nueva prueba as hoy he ha hecho sido realize el cluster 2 maquinas office in una misma Máquina física y to ha s con exito, pero cuando intento realize el 2 nodos cluster (2 machines virtual cada una fisica diferente Máquinas) cuando me da el error. Esto deduzco raiz Quebec are a VMware o red, no lo o problema se, he probado use tan solo 1 switch (infrastructure utilizaria 2), changing IPs, pero igual sigo as can be? contacts? Alguna especifica VMware config?

  El caso're llevo several days ago that don't con este problema y no se a what can deber, agradeceria muchisimo the the comunidad ayuda.

  MUCHAS Gracias

  Buenas

  Between 2 workstation are posible realize ese tipo configs of forma limpia.

  El problema're (sniffer lo of UN pones veras TR), Los nodos assume ip-spoofing y arp spoofing cuando salen por tarjeta of Red led host.

  Para hacer eso as pides, deberias workstation pasar an esxi.

  Saludos

• Upgrade RAM R420

  Looking for possibly increase the RAM on a R420: dual processor (2 x Intel Xeon E5-2430 2.2 GHz), 2012 64-bit server. The vehicle currently has 16 GB of RAM (4 x 4 GB 1333 MHz); total of 12 slots reports system information. What are the configuration/ordering options possible with the addition of extra 4 GB or 8 GB sticks? I did not necessarily a desired level of GB to achieve, but I'd like to at least get to 24GB.

  (I've seen a few similar posts, but not with my exact Setup, so I hope that this is not a duplicate)

  Intel Xeon E5-2430 2.2 GHz x 2

  Klb_Arc,

  It will build on the DIMM 4 GB UDIMM or Rdimms are existing. If the DIMMs to 4 GB UDIMM so the only option you would add DIMMS to 4 GB to 48 GB. Now, if they are Rdimms you more options. With Rdimms, you can go to 96 with 12 8 GB DIMMS, or even 192 GB, if you si vous deviez need to chose 12 16 GB DIMMS. With their mix, I would suggest adding 4-DIMM 8 GB and placing them in A1, A2, B1 and B2. Then place the 4 4 GB DIMMS in slots, A4, A5, B4, and B5. Which leaves you with a total of 48 GB total. You can now add and remove part of the DIMM for different configurations, it is just a suggestion.

  Let me know if this helps answer your questions.

• I have an ipod touch 128 GB... but I'm almost to reach its maximum.  I want to do is buy a new ipod touch 128 GB and add new music without synchronizing the entire library to it... I have 2 ipods in conjunction with other copies

  I have an ipod touch 128 GB... but I'm almost to reach its maximum.

  I want to do is buy a new ipod touch 128 GB and add new music without synchronizing the entire library to it... I have 2 ipods in conjunction with the other copies of the other.

  is this possible?

  What should I do?

  Matt

  When you get the new iPod, you can use iTunes on your computer to select and synchronize the music you want on it, in the same way that you synchronize your current iPod - your iTunes will recognize them as different devices and will remember your choice of synchronization for each, it will not (unless, for example, you restore the backup of your current on her iPod) put the same content on both.

  (I asked for your post be moved to the iPod Touch forum, where you have posted is the iPad forum use.)

• The screen add people faces a (~ 1600) much just show as squares of white, grey

  Hello

  I was going through my photo library (running 2.0 on Sierra Photos) cleaning and marking of the people. I got far just about every face on the left is a square white, gray. If I add this person, the area where the image would be just rotates the circle of progress.

  Any idea on what is happening? I really miss the ability in iPhoto in order to have a Smart Album based on a photograph with a person "without name".

  Thank you, Tim

  

  That is a disused here bug that if you click on the x to remove a face, you end up with a tile empty - I hope that this will be fixed in a future Apple 9tell on the bug to improve its priority - http://www.apple.com/feedback/photos.html of output) and I hope that the patch will fix these old problems as well as properly - not advancing It is better to stop the removal of the faces until this problem is corrected

  LN

• Add dictionary

  Hello.

  I have a question: I would like to add additional dictionaries in the Sierra of MacOS.

  Initially, some trouble with record find "dictionaries". But this problem is solved here: where is the dictionary in the Sierra folder

  After that, I saw:

  

  (It seems different from El Capitan).

  In the folder "CoreDataUbiquitySupport" can't get the files with the .dictionary extension.  And throughout the system (I used Spotlight) I cannot find these files.

  When I try to add my files with extension .dictionary in "Dictionaries" folder - nothing happened.

  Please, help me. What should I do?

  Thank you.

  I found the files .dictionary you are looking for here:

  / System/Library/assets/com_apple_MobileAsset_DictionaryServices_dictionaryOSX/37 7ca105ade0203e0c89af6538f7b8ab0204dfba.asset/AssetData/Oxford English.dictionary thesaurus

  / System/Library/assets/com_apple_MobileAsset_DictionaryServices_dictionaryOSX/5 has a689bfd471f943f70bd220ec2ed3849b7dbec3.asset/AssetData/Oxford Dictionary of English.dictionary

  / System/Library/assets/com_apple_MobileAsset_DictionaryServices_dictionaryOSX/f9 384c21fc7d64ad09992ad8bebbbfac16ad6a9d.asset/AssetData/Apple dictionary

• can I still add to apple care if the warranty has expired?

  can I still add to apple care if the warranty has expired?

  No, if it is out of warranty, if it is for a Mac: http://www.apple.com/support/products/mac.html

  The AppleCare Protection Plan can be purchased as long as your Mac is still covered by the limited warranty of one year.

• Add people

  So, I've updated for Mac OS Sierra. Have been using the Photos app since it was released and spent a lot of time organize using faces and now I have hundreds of photos to browse again and put names to people.

  I'm in add people and get 632 white picture with numbers under. To be able to identify the people, if I add them, and then double-click it to view more deep - no images do not face appear.

  I already went through and added all the images of virgins like that and then hidden, now, today, I have another more than 600 of them. Any ideas?

  I NSB Sierra since the evening he lauched and use my Mac every day for that if he should have had time to complete the analysis now.

  Thanks & Hello all

  

  but he has finished scanning and - when you launch Photos and click on people get you people or a text for scanning status?

  LN

• "Add a printer" crashing

  Pref systems > Scan & print

  I can open the Scan & Print window under system preferences; However, when I click (+) to add a new printer, the Add Printer dialog box opens a second and quits immediately. This behavior started after I removed an existing printer.

  Does anyone know how can I fix?

  Reset did not help.

  Error log shows:

  Process: AddPrinter [406]

  Path: /System/Library/CoreServices/AddPrinter.app/Contents/MacOS/AddPrinter

  ID: com.apple.print.add

  Version: 8.3 (405.2)

  Generation information: PrintCenter-405002000000000 ~ 1

  Code type: X 86-64 (Native)

  Parent process: launchd [177]

  User ID: 501

  Date/time: 2016-10-05 16:30:40.801-0700

  OS version: Mac OS X 10.8.5 (12F2560)

  Report Version: 10

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0x000000010e05ca8f

  Reset the printing system

• Why can't add sounds to mail to Sierra

  After the upgrade to Sierra, I would add is no longer a 'personal' sound of my files to act as my 'new message '. The sound folder is locked and I have, even as an administrator, can't unlock it or add sounds in the folder.  All I have now is a drop-down list of predetermined choice of Apple, and none of these things include the addition of new sounds.  Preference once gave me the choice to go to my files, I have more choice. Can someone tell me how to add my own sounds?

  MACBOOK PRO15.

  Intel core i7 to 2.7 GHz

  8 GB memory

  as it is in this matter and, of course MAC OS Sierra 10.12.

  Greetings gklav,

  Thank you for using communities of Apple Support. It seems that you want to use a custom sound in Mail when a new message arrives. I recommend reading this article, it explains how the feature works and what is available.
  
  

  New sound of messages

  The sound to play when you receive messages. To make a sound sampling, click on the context menu, and then select a sound.

  Mail for Mac: General preferences in Mail

  Take care.

• When I add a playlist to my library, it automatically updated with new songs?

  Hello world

  When I add a playlist to my library, for example a list of music playback from Apple which is regularly updated by the editors ("Best of the Week" or 'Hits of today', for example), did the playlist in my library automatically update with new songs, when new songs are added?

  Thank you in advance.

  Hello, take a look at this article If you see not your entire library after you update iTunes on your Mac or PC - Apple Support

• Tips to add a VPN router to my current network configuration

  Dear all

  My apologies if the answer to this question already exists, however, I searched in many situations and none seem to match what I'm after.

  I currently have an ISP modem/router in Bridge mode connected to a TC of Apple which is my wireless router, I have 2 Express airport connected to this acting as the extensors of the range.  I have a VPN service through the MyPrivate network I activate on the desired device when required and everything works fine.

  What I want to do now is to be able to use my AppleTV and burning Amazon via the VPN as well so you need to add a VPN router in the configuration.  I want to finish with 2 wireless networks running together for these devices who need VPN and those who are not.  I don't want to lose the opportunity to extend the network to express it however airport.

  If someone could explain to me if this is possible and if so how do I set up the network.

  Thanks in advance

  Mark

  Basically you would need a device that supports VPN-passthrough and VLANS for your goals of networking. MyPrivate network, seems to be a VPN SSL, which is a user-server configuration. In other words, you install a client VPN on your Mac and you connect to the VPN network MyPrivate server to establish a VPN tunnel.

  Networking two or more "separated", should be using a router that supports VLAN services. Each segment of VIRTUAL local area network, in essence, would be a separate, she either wired or wireless network or a combination of both. This would probably be the 'easiest' part for the installation program.

  Now how combining the two would be the question, and I don't know what would be the best way, or even if it is possible.

  A few thoughts:

  • Use a router that supports VLANS. Create at least two VIRTUAL LAN segments. One for Apple TV & Burns, one for Internet access in general. Connect the device to VPN client host on the first segment, and configure for Internet sharing.
  • Download a dedicated VPN network application that supports hosting of third-party VPN clients, like yours. You would still need a router that supports VLAN to provided separate network segments.
  • Hire a consultant network. Let them know what you the goals of networking and ask them to offer potential solutions.