Confused about accounts of users after recovery

Similar Questions

• unknown user after recovery

  After picking up my system, a user named 'another user' appeared on my logon screen... I was unable to follow it on my system and I want to get rid of it... No help available

  Why don't you just delete this account? If in doubt how to do, click Start, click Help, then search for help on "user account". Now follow the instructions to manage your account or 'other '.

• confused about the available memory after upgrade to ESXi 5.1

  Hi noobie question here

  After an upgrade to ESXi5.1 (wiped ESXi5.0 and installed fresh and imported 5.1 2 s previous VM), I can start is more two virtual machines when they use the 3 GB of RAM each. In ESXi5.0, it worked.

  I need to reduce 2.6 GB RAM for each virtual computer. The only thing that I see is this "total capacity" is 5.7 GB while the system has 8 GB of RAM. Please see the attached picture (I don't know what 'Full capacity' read in ESXi5.0, so I can't compare)

  I understand ESXi5.1 needs some overhead and that each VM needs some overhead, but I have yet an another 1.5 GB of RAM available for my VMs.

  8185 (ability)

  -2660-2640 (two machines)

  -231-194 (overhead for 2 virtual machines)

  = 2460

  Does this mean that ESXi5.1 uses 2.4 GB of RAM to run 2 virtual machines? The photo shows 984MB in use without the virtual machines are started. So start-2 VMs cause ESXi5.1 use 1.4 GB more RAM?

  If so, what form that would show? I am sure that it is me who is missing something, but please explain.

  Thank you

  Well Yes... somewhere down the line, the ESXi5.1 host memory usage was doped up to ~ 2 GB. In my system 32 GB, I use only 26 GB

  But even once, there are a few tweaks to release some 500MB in the configuration of the distribution of system resources tab. You can have a shot at him. But I wouldn't recommend it.

• confusion about rman restore

  Hello world
  I have some confusion about rman restore and recover procedures. I read doc available in this regard and google as well. A few more questions unanswered in my mind.
  1. do the restore backup command restore controlfile also alongwith datafiles.
  2 database is running in noarchivelog mode. Suppose one of say users.dbf data files has been removed. control files intact. the same seq # is available since the last log backup. Now to restore the database, I use the following steps.
  1 rman > shutdown immediate
  2 rman > startup mount
  3 rman > restore database
  4 rman > restore database
  5 rman > alter database open;
  
  I'm wrong. This is the one. In this scenario, the steps above can be used.
  
  3. even when logseq is not available when the database is saved, I take the following steps.
  1 rman > startup nomount;
  2 rman > restore controlfile autobackup.
  3 rman > change the editing of the database;
  4 rman > restore database;
  5 rman > recover noredo db;
  6 rman > alter database open resetlogs;
  It is a right. can I adopt this procedure in my scenario.
  
  Please do not give all the links I want some explanation of your minds.
  
  Geetanjali.

  sonidba wrote:
  Hello world
  I have some confusion about rman restore and recover procedures. I read doc available in this regard and google as well. A few more questions unanswered in my mind.
  1. do the restore backup command restore controlfile also alongwith datafiles.
  2 database is running in noarchivelog mode. Suppose one of say users.dbf data files has been removed. control files intact. the same seq # is available since the last log backup. Now to restore the database, I use the following steps.
  1 rman > shutdown immediate
  2.RMAN > startup mount
  3.RMAN > restore database
  4.RMAN > restore database
  5.RMAN > alter database open;

  I'm wrong. This is the one. In this scenario, the steps above can be used.

  If after the last COLD backup is there not get command of newspaper (this means journal seq number is the same), so you can restore your database since the last backup and can retrieve it. And if thi does not need perform full restoration/recovery. At instead step 3 with DATA RESTORE (or RESTORE TABLESPACE USERS) file and step 4 instead with RECOVER DATAFILE (or RECOVER TABLESPACE USERS) and after that you can open the database by using ALTER DATABASE OPEN. If you have lost datafile users.dbf it means that this (tablespace) datafie has been automatically disconnected.

  3. even when logseq is not available when the database is saved, I take the following steps.
  1 rman > startup nomount;
  2 rman > restore controlfile autobackup.
  3.RMAN > change the editing of the database;
  4 rman > restore database;
  5 rman > recover noredo db;
  6 rman > alter database open resetlogs;
  It is a right. can I adopt this procedure in my scenario.

  Yes you are right in this case. There, you have to restore/recovery complete database, because of your database running in NOARCHIVELOG mode. But after database restore (step4) you can just issue RESTORE database and can open with RESETLOGS options also. Also if you have incremental backups can run NOARCHIVELOG mode even RETRIEVE the NOREDO of DATABASE then you can open the database.

• Confused about Directx 9 .0c

  I installed Mass Effect for PC yesterday on my Windows 7 PC.

  After the installation is complete, a popup opened asking me if I wanted to install Directx 9 .0c, as it was required for the game to run. I chose not to install it while I'm confused about Directx backward compatibility.

  First of all, is the Setup installation Mass Effect offers, the same as the Execution on the site of Microsoft Directx end user?

  Second, if the version of the installer from Mass Effect differs from Microsoft, I'm sure the Microsoft runtime more.

  But I do not understand what the runtime needs to reach - it allows me to play the old Directx 9 .0c and previous games on my Windows 7 PC, but still be capable of Directx 10 and Directx 11 games as well?

  One last thing - the Mass Effect system requirements say that my sound card must be compatible Directx 9 compatible .0c. How will I know that my sound card is compatible? I ran dxdiag but he didn't tell me whether or not my sound card is compatible.

  Thanks for your help!

  Hello bingiton.

  In short: install it.

  DirectX 9 is separated to DX10 and 11.  And some games require DX9 optional components that they want installed. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Error when you try to connect to the account of user: the user profile service failed the lied/user cannot load profile

  Im trying to connect to my own acc on my computer, but it says 'the user profile service failed the lied/user cannot load profile' im using an accout comments I had set up for my sister and that I keep reciving a message saying that Windows Explorer as stoped working so I can't open any doc.music. pictures or whatever it is im in internet using foxfire that I installed it on another acc please help I don't know how to connect to m trying to connect to my own acc on my computer, but it says 'the user profile service failed the lied/user cannot load profile' im using an accout comments I had set up for my sister and that I keep reciving one message saying that stoped working so I can't open Windows Explorer all doc.music. pictures or whatever it is im in internet using foxfire that I installed it on another acc please help I don't know how to connect to my admin accmy admin acc

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• Access to my files on a nonadministrator account administration user account.

  Under windows Vista. I have an administrator user account on my machine, but it does not appear in my list of 'change user '. I can only connect to my computer via a nonadministrator account. I'm trying to access the administrator account, but it is apparently requires a smart card is inserted. If only I could get the ADMIN user account to appear in my user account to log on, I could enter my password.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Retrieve the user profile for a new user after user profile Service failed and could not be loaded

  I use Windows Vista Home Premium operating system.

  I wasn't able to log onto my user;  I searched online for an answer and advise him to create another user - I had 'Admin' status with the original user.

  I followed the following instructions:

  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&CS=19&docid=39CC797DE6882CB6E040A68F5B285C29&l=en&s=DHS

  According to these instructions, I've logged on the account current and open a session on the new user account.  However, all my documents, pictures, music, files, office, Microsoft Office Suite, Microsoft Outlook Email, etc. have disappeared!

  I not created it of new files or documents under the new user in the fear that it crushes everything and help restore everything back to its original state.

  When I performed a search of the system / "C: drive", none of the documents or files have been found.

  How to restore these things, especially my photos?  Or, how to restore the original user?

  Any help you give me for this problem will be greatly appreciated.

  original message: error message: "could not load user profile and user profile Service failed". Made a function to create a new user, but all my files, pictures, music, desktop icons and other stuff are GONE AND I can't FIND them ANYWHERE!

  Hello

  Your data and files are still there in the C:\Users\Your user name where C: is the drive where
  user profiles are stored.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
  Earth) has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with
  a temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Confused about "additional control Points.

  Hello

  I'm confused about this sentence from database Concepts 11g Release 2 (11.2)

  Additional control points

  An additional control point is a type of thread control point in part intended to avoid writing a large number of blocks online redo log switches. DBWn checks at least every three seconds to determine if he has to do. When DBWn written stamps Sales, it advances the position of the control point, causing CKPT write the position of the control point to the file control, but not for data file headers.

  I thought that a checkpoint is written datafileheader and controlfile, this happens for example after a switch logfile - right?

  So, why not in the case of additional control point? For best performance?

  Additional control points to reduce the time to recover, as more data is committed to the files of data, right?

  Concerning
  Christian

  efa78257-b5f4-4db1-8222-007be18d15aa wrote:

  Hello

  I'm confused about this sentence from database Concepts 11g Release 2 (11.2)

  Additional control points

  An additional control point is a type of thread control point in part intended to avoid writing a large number of blocks online redo log switches. DBWn checks at least every three seconds to determine if he has to do. When DBWn writes buffers of Sales, it advances the position of the control point, causing CKPT write the position of the control point to the file control, but not for data file headers.

  I thought that a checkpoint is written datafileheader and controlfile, this happens for example after a switch logfile - right?

  So, why not in the case of additional control point? For best performance?

  Additional control points to reduce the time to recover, as more data is committed to the files of data, right?

  Concerning
  Christian

  There are many types of control points. One that will be updated on the headers of data files would be a complete control and would be applicable to the entire base. The additional control point is induced to keep on enhanching a counter that would ensure that only certain limited stamp Sales would be recovering. That's why a moment of the additional control point, data file headers are not being updated. Control file is probably updated with a "pointer to disk" which mentions the point up to which the dirty buffers are written in files (from the buffer cache) data and where to start the recovery, if necessary. Log file switch will cause a thread control point which, for one instance, would be considered a Global checkpoint only. The additional control point would be for various other reasons such as setting a value for the parameter Fast_Start_Mttr_Target etc.

  HTH

  Aman...

• I'm confused about my billing

  I have Adobe Creative cloud and I went to the student. I understand that the $12 plan / monthly is only for the first year, but when he jumped to $65 per month which was a pretty big leap (especially for someone who is still a student) and so I called Adobe customer service. I was told that I had changed my plan in October, something I never remember to do, but the representative I spoke with said she would get back on the plan of the student for $21 / month, and I will get a refund of $27,23. I realized that I was not getting a full refund because I was already at middle of January so I was fine with that too. The same day I receive a supplement of $21,23 and no refund. I remind them again and asked what was going on and said it was a policy of the company to charge the monthly fee for the new plans from the outset. I asked the officer if that's the case, why I do not get a full refund for the $65 I paid this month. She said it was because I was already in the month of January and this is what she was allowed to give me. I asked what month the charge $21.23 is for. She said it was for January. I told him that he didn't add up because according to its share of January has already been used and paid and cannot be refunded but I'm being charged for the total amount of January again under the student rate she changed her of me. I should get a full refund, as new charges $ 21.23 should cover the entire month or if I can not pay the full amount of $65 then I should get an amount proportional instead of a full $21.23 since according to its share of January is already paid and cannot be refunded. Even if I don't get a refund later, all I'm really going back to the day of $5,59 if you take into account the $21.23 I'm running at the front which is practically nothing in Exchange to go through this ordeal. I would have been better off I don't got no refund and just got charged for the month next February. She said she would take the case to his superiors to be studied by a higher office and gave me a case number. I am still confused about this because it just didn't seem like a good way to do business. I feel like I'm being charged twice for the days of service used. None of this makes no sense to me.

  Sorry, but only Adobe can help, not another user to and open forum

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• Two accounts of users, unable to synchronize their iTunes content

  So basically, I have a macbook air, but two accounts of users about it. As an iTunes and share the same iTunes account. However, since moving to my new user account, none of my music appears to download here, although I downloaded it on my other account. Sure that since she is already in my computer, so I don't have to download twice. The answer may be simple, but I'm really not. I don't want to waste space, and if one day I want to download a movie on both accounts, well of course which would cost me lots of storage.

  Just a note, it is not things such as an account of "iTunes".  Do you mean the iTunes library, or do you mean that both use the same AppleID?

  Home sharing iTunes now works between users on the same computer - https://discussions.apple.com/thread/3865597

  You can configure two entirely separate libraries and share music via home sharing.

  iTunes: how to share music between different accounts on a single computer - http://support.apple.com/kb/HT1203 - moving the folder of iTunes media to a shared but area leaving the separate library files - extra tip to https://discussions.apple.com/message/17331189

  Chris CA instructions on sharing an iTunes music library between multiple user accounts - https://discussions.apple.com/message/8974074 - multiple users using a single library of files - similar post to: https://discussions.apple.com/thread/3753008

  Turingtest suggestion for multiple users and a library - http://discussions.apple.com/message/9117622 - use the tags and smart to isolate groups playlists.

  Discussions on the use of the purchases made at several AppleIDs in a library iTunes - https://discussions.apple.com/message/19543804#19543804 2012

  Sharing a single library between users - https://discussions.apple.com/thread/3753008

• Satellite T110-121 - Question about disk and hard drive recovery

  Hello

  I started to use my nice new Satellite T110-12. How can I create a recovery disc?

  Why is there that a common message on the vibration has been detected, HDD head has been moved to a safe position? Is there something wrong? I would return it before the week is up?

  Please answer, thanks a lot a lot!

  Hi LindaMon,

  > How to create a recovery disk?
  What about reading your user manual?
  You need a 8 GB USB key for the creation of a support recovery and preinstalled Toshiba Recovery Disk Creator.

  > head drive has been moved to a safe position?
  Yes, that's normal and everything is ok with your laptop. Your HARD drive will be protected by HDD/SSD Alert utility which is a nice feature of Toshiba to avoid accidents of the head and can improve the lives of the internal HARD disk.
  But yoou can disable these notifications if you want. ;)

• See not all users after reboot

  I put two on macbook iCloud account. When I log out I see screen with the other user, after reboot or turn off / I see that my profile and host, the other user has not.

  Disable the FileVault and both users are now available

• After recovery, admin password information with 'points' and impossible to remove or change

  Hello.

  I ran yesterday, updates of Windows 7 but only those necessary.  I do not have one of those as an option.  After the updates completed, I turned on the computer and he was stuck in a loop cycle - from windows, then the admin password, connect you box came.  The box was fiiled in (with "dots" but too many to represent my password) and the screen just quickly flashed back & forth between the login screen and 'incorrect password '.     I tried to change username, and it flashed back into the admin log.

  I did a system restore to the factory settings (after saving all data) using the recovery discs.  After recovery, the screen "Set a password for the account" comes with the box below "Type a password" completely filled with dots.  I can't delete them with the BACKSPACE or DELETE key.  If I put highlight and then try to erase it with BACKSPACE or DELETE, the cursor just moves on the right side of the password box, but it is not always remove the defective "dots" password so that I can change.

  I tried to restart with the power and then switch on again.  After selecting the country & language again, same password screen developed.

  It's stuck!  Any help would be greatly appreciated!  I have computer I have is the HP Touchsmart 310 1155 - Y.

  Thank you!

  It's curious with a recovery.  First, try to reset the password using NTPassword.  Do the boot CD that him following the signs.  If this does not resolve the problem of signon, think to install the operating system from a typical drive of Windows 7 to the same version, using the key of the COA sticker.

• Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for RAW files. I have 8.7 DNG, but I was wondering if LR and PS will import direct soon thanks for all the tips

  Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for RAW files. I have 8.7 DNG, but I was wondering if LR and PS will import direct soon thanks for all the tips

  Support for the Nikon D750 was introduced in the last version of LR 5.7 and ACR 8.7 Novemder 18 2014.

  New updates for LR 4 were arrested when LR 5 was released on June 9, 2013. No other updates of bug fixes and new camera support.

  Nada, LR 4 will never support Nikon D750. The Nikon D750 was introduced on the market in September 2014 some 15 months after further development of LR 4 was arrested.

  You can use the Adobe DNG (free download for packing) program to convert your Nikon D750 Nef (raw) files in Adobe's DNG format which will allow you to import those into LR 4. This is the crutch provided by Adobe to allow the processing of raw files with versions out-of-date LR and ACR.

  You can also update the ACR for PS CS6 version 8.7 plugin that can also work with the raw files of the D750. For direct support in Lightroom, you will need to upgrade (paying) to version 5.7.