Add space to ESX 3.0.1 after expansion RAID5
Dear friends,
I did a RAID5 expansion via raid Manager IBM on a machine of Vmware esx 3.0.1 and adds a new record of 143Gb RAID5.
After that, I used esxcfg-rescan, esxcfg-vmhbadevs and fdisk to create a new partition in the empty space.
Now my fdisk-l looks like this (I also have a/dev/sda, but it's not important):
Disk/dev/sdb: 586,7 GB, 586764255232 bytes
255 heads, 63 sectors/track, 71336 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device boot start end blocks Id system
/ dev/sdb1 * 1 53502 429754783 + fb unknown
FB/dev/sdb2 53503 71336 143251605 unknown
Now, the/dev/sdb1 is what I see as a Storage1 Vmclient and where I put all my vm.
I need to create a Storage2 using/dev/sdb2 and see in Vmclient as Storage2 to store the new virtual machine.
Is this possible? How do I do that?
Kind regards
Claudio.
You can try to measure in the data store.
But (if I remember correctly) is not possible to from the VI client.
If datastore / measure does not work, use the command vmkfstools command line.
André
Tags: VMware
Similar Questions
-
Shrinking Bootcamp partition and add space for Macintosh HD
Guys, after helping me with my previous question, my Macbook is almost as I want it to be. As said, I have a Macbook Pro 15 "retina end 2013 with OS X El Captain (later) and in addition, a Bootcamp with Windows partition 8.1." It's that everything works fine now, but the partition Windows 8.1 has 300 GB and my score only 80 GB hard drive Macintosh.
I wanted to shrink the partition, Bootcamp in Windows 8, 1 with Minitool Partition software but, obviously, when I reduce this score I get unallocated space that I can't turn into a new partition because I have 4 partitions in the MBR slot. So, what is the best way to reduce my Bootcamp partition and add space on the Macintosh HD partition?
Thank you very much!
Remove the Boot Camp partition, and Windows using Boot Camp Assistant. Then start to affect the size of the Boot Camp partition you want.
-
Add space to 'Label' in a graph
The labels in my chart are too close to the base line. I can't understand how to add space through so I thought that I could add a space behind the label formatting. Someone at - he tried this or know how to operate?
Here's the code.
< label >
< xsl: value-of select = "Book/name" / >
< / label >
I found how to do this
.
-
I tried to understand this for about 30 minutes, but I'm not a programmer by any means... On one page, I have agent_code which is 5 characters all together... On another page, I need to divide 2 characters in a box and 3 in another... Because of the content on the page that I have to hold the data typed, I need to add spaces... So, if I typed in X1A43 in the agent_code area... I need to go out as a 'X 1' and '3 4'
I have a job bootleg autour (literally do 5 outlet boxes and slice values), but I'm trying to learn how to better understand this.
How do you want to add spaces between each character in agent_code_part1 and agent_code_part2?
Custom validation script
(function () {}
Do nothing if the field is empty
If (! event.value) {}
getField("agent_code_part1").value = event.value = "";
getField("agent_code_part2").value = event.value = "";
}
Fill out the agent_code_part1 and the agent_code_part 2 with the first 2 characters and the last 3 characters entered in this field, respectively
If (event.value.length = 5) {}
getField("agent_code_part1").value = event.value.slice (0.2);
getField("agent_code_part2").value = event.value.slice (2.5);
}
})();
It is certainly useful, thank you.
Then... I don't know exactly what you did, but I tried my best to understand... So he can do exactly what I wanted to do (I needed an additional two spaces), I changed the code to do this and it worked like a charm... Thank you!
erase the part agent fields;
this.resetForm (["agent_code_part1", "agent_code_part2"])
Suppose a valid entry;
Event.RC = true;
test an alphanumeric string 5 and reverse the string 2, parts 1, 2;
If(/^(\w{1})(\w{1})(\w{1})(\w{1})(\w{1})$/.test(event.value))
{
this.getField("agent_code_part1").value = RegExp. $1 + "" + RegExp. $2
this.getField("agent_code_part2").value = RegExp. $3 + "" + RegExp. $4 + "" + RegExp. $5;
}
Else if (event.value! = "") {}
Event.RC = false;
App.Alert ("Agent code must be 5 characters", 0, 0);
}
-
Cannot add space on a virtual drive?
I try to add space on a virtual disk existing on one of my VM file servers so that I can extend this partition on the guest OS and vSphere gives the following error:
Current disc size is 1000 GB and try to add 250 GB of this existing drive. I was able to do this in the past on this same server on the same drive in the past.
I haven't restarted this server yet but wanted to see if anyone else has had this problem. This works on other VM servers, I have as I have tested a few minutes ago is specific to that server VM.
Hi Pyr0TeK,
Maybe you have reached the maximum size of the file. You can take a look at the following kb.
It will be useful.
Concerning
Franck
-
How to add space before the content when printing or export PDF
Hi Experts,
In OBIEE 11.1.1.6.0.
It has a single report worth two requests, in order to show the structure of the hierarchy, I add a few spaces in front of the content, however, when I print or PDF exprt, it will be gone. How to solve this problem?
A single method (maybe it's BUG):
Inter-generational column-> data-> treat as html Format
Then in Edit formula, enter the following code: "< table > < tr > < style td =" padding-left: 20 ">" | "Time '." "" By name of half | "" < table > < /tr > < / table > ' "
When I print or PDF exprt, it will display the HTML to PDF.
Second method:
Inter-generational column-> data-> Text Format gross (do not break spaces)
"Then in Edit formula, enter the following code:" "| Time '. " By name half. "
When I print or PDF exprt, spaces will be missing in the PDF format.
I try to make many methods, but can't find the right solution to add spaces before the content of the second report to see the structure of the hierarchy as below:
CombinedColumn (year and month column combined)
2009
-200901
-200902
2010
-201001
-201002
Note: '-' in the name of space
Is there a good suggestion or the method associated with this problem? Please help me to find or give me better advice. Thanks for your kindly help.Hey Kobe,
To achieve this,
2009
-200901
-200902
2010
-201001
-201002You can use properties of column-> right = Horizontal alignment and Vertical alignment = at the top, but you have multiple queries in your report. The approach is to differentiate the different levels and apply conditional formatting. Try this approach,
1. click on the request combined so that you can see the option "Add the result column" in the left pane
2. click on 'Add a result column', in the type of column in your time dimension column (if the column is first has type saw_0)
3. yet once, click on 'Add column result', enter the column formula: case when (saw_0) LENGTH > 5 then 2 1 other endHere LENGTH (saw_0) > 5 will return only the month records (i.e) 200901,200902 etc.
4. now click on properties on the column to the new column added in step 2, goto-> add a Condition of-> conditional formatting select the column added to step 3->
-Case when (saw_0) LENGTH > 5 then 2 1 other end = 2 then format-> right = Horizontal alignment and Vertical alignment = Top
This indentera the month right column. This will work when exporting to pdf format.
Kind regards
DpKa -
I have a customtag which returns a string, but I noticed that the spaces are added at the beginning and at the end of this string. These spaces are not in the customtag, the chain was cut!
So why the customtag add spaces? and how to prevent that? (I know I can return the string in a variable in the calling and exit page so that on appellant page, which works fine, but I don't want it like that).It is a known issue with the management of an area of coldfusion. enablecfoutputonly don't ignore carriage returns and spaces. You can enable whitespace management in the ColdFusion administrator. You can / must also use
copiously. If you have a label where a space attack / of leak is absolutely essential, the approach I've used is to build a string to be displayed later in the tag, for example -
Why am I getting mixed results after expansion direct painting concerning the other paths?
I notice with live paint, most of the time when I develop and disassociate my strokes of my roof, that sometimes the lines are all closed forms because they were originally, and other times they are cut where they cross eachother. At first I thought that the cutting of the path is only occurring where in the live paint group colors were applied to different categories of shapes that overlap...
but in these cases sometimes after expansion/separate, these initial forms are still intact... I can't understand what is the problem...
bluefire777 wrote:
If you create your initial forms as in the road open or closed with traits but NO fill, when you "develop" this live paint group, your footsteps of origin are kept, they will not be cut...
It is simply not true.
It doesn't matter what you enter. The only thing that matters, it's how make you out in the group.
If I take these 3 circles
Do a live paint group
All the features of black paint
And then I get 3 circles
So what you enter is not serious. It takes only the appearance of the "live" version
-
I have a Document level Javascript used to identify empty mandatory fields and fires on shares of paper, print and save. The script identifies the required fields empty, counties and outputs of an alert box indicating the number of required fields empty and lists the name of the ToolTip fields. The script identifies the required fields with an asterisk at the end of each balloon.
Is my question possible to add a space or a line break after the decimal point for each item?
Here is a picture of the exit where the items listed are all grouped together.
Here is the code:
function validateFields()
{
a counter for the number of empty fields
var = 0 flg
count all the fields of the form
var n = this.numFields
create a table to contain the names of the required fields
If they are determined to be empty
fArr var = new Array();
Browse all fields and look for ones that are required
all fields that have a ' *' in their ToolTip are required
for (var i = 0; i < n; i ++) {}
var fn = this.getNthFieldName (i);
var f = this.getField (fn);
ToolTip is the property of 'userName' of the fields\;
TT = f.userName var
test the ' *';
If (TT. IndexOf('*')
! =-1 & & f.value == f.defaultValue) {}increment the counter of empty fields;
FLG ++;
Add the fields username (ToolTip) to the list of the names of fields empty.
fArr [fArr.length] = tt;
}
}
now display a message if there are blank fields
if(FLG>0) {}
App.Alert ("there are '+ flg + areas that require a value\n\n' + fArr, 3")
}
else {}
This.Print ();
}
}
The required property is very easy to use. It's just a Boolean (true/false) value, then you can use it like this in your code. Instead of this line:
If (tt.indexOf('*')! =-1 & f.value == f.defaultValue) {}
Use this:
If (f.required == true & f.value == f.defaultValue) {}
-
How to add space to the D: drive while extend space is dimm
After the installation of cleaning that had become indispensable, although my computer, seams now healthy but his unit became full and forthcoming, not only with repeated messages of "Space bass", but also various errors, here and there.
Among the choices, to increase its space, I chose to increase or remove files to D:. In doing so, I comfortably shrunk C: by 1.25 GB. But the BIG problem is that there is NO way to add this on the D: drive.
The commands and options in disk management are therefore very obscure and non-understable that, after 10 days of fighting, I'll have to come to your aid. Please do something as you can so that I can add the space unallocated with my D: drive. Otherwise I'm in big trouble; no updates to come; No downloads are possible. I'm sitting with meaningless fight and nothing else.
my email: * address email is removed from the privacy * 17 October 2012
Hello
You can't do what you want to do using the disk of Vista management.
You can't take a little off-C: and nail it on D:
And are you sure that D: is not your recovery Partition to reinstall the operating system.
If it is read this:
Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.
1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.
F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.
You will need to ask your manufacturer for proper sequence.
2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.
Also ask them how to make records.
Your D: Recovery Drive is should not be used for backups, defragmented, etc..
There are backups on an external hard drive.
To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If it is not the recovery Partition, Vista for you options to > save data on D: > D: delete > C: extend into the now unallocated space where D: is.
http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html
See you soon.
-
Problems of loss of space with ESX 3.5i (URGENT)
Hi all
I had a DELL power edge 2950 ESX 3.5i with a raid 5 installation disc and loaded with more than 500 GB of space.
Got
4 VM miss this topic with much question (dv01, vm02, vm03 and vm04).
Sometimes the last week, I noticed my ESX froze on me and not answered.
then I managed to restart and then noticed I had only 2.0 GB of free
space on the data store, when a week before I have more
200 GB free.
So I browsed the data store and noticed all the VM has had a new *. VMDK
files inside the folder of each VM. marked dv01 - 000001.vmdk.
VM02 - 000001.vmdk etc... showing a different size and the original
VM01.VMDK display of the original size.
When I add all these new files 000001.vmdk, it represents the entire lost, I lost.
I am
out of options and do not know what I can do to stop this mess.
Why all the VMS create all these additional disks and lose all my
space. I loaded the last 3.5i ESX patch and that seems
Help. I had to remove a VPS I barely use it just to keep the box
living and now only have about a week or more, until the space is lost once again
and down to the free ogb.
(See attached files, which shows a VM of 120 GB drive, and now he has created a new 0000001.vmdk of 70 GB file)
Can I remove all these new 000001.vmdk of each virtual computer folder files? or vice versa? Any help would be great.
Thank you very much.
You must create a world of pain! Whatever you do do not remove the basic disk - it is used for read access. All entries are in the delta (snapshot) until you commit (remove) the snapshot via the Snapshot Manager.
-
Add space and dash at the time here
Hi guys,.
is there a quick way I could add this space en dash and dash to here after a Superindex of character?
I do it manually now. No problem with 4 notes but 20 it a little different.
Thanks for any help or ideas.
See you soon,.
SEBS
You could simply add them as part of the number in the list numbered for style options.
-
Tables InDesign add space between lines of text
I'm working on a series of documents that use tables for some elements of the text as a calendar with columns for date, day of the week and event. All the cell borders are reset so that the text just looks like tabulated text. The problem that I am running is that the table seems to add about two points of the vertical space between the table and the text above it. Documents are designed without a baseline grid, so I can't simply lock paragraph styles to the grid, but we do not want that the spacing between the different styles of title and other text to be consistent. A table InDesign has some kind of hidden vertical dimension, or am I missing some added space that I should be able to remove? All cells are sized to match the direction of the paragraph style of the text they contain and any space before or after you have added as an insert in the cell, but for some reason any seems to be about two points of extra space at the top of the table (between the table and the text non-table above).
Sounds like the Table Options > Table Setup > Table spacing.
Ken
-
When I press the button edit bookmark or download the toolbar for navigation that a line of space appears between the navigation bar and the bookmarks toolbar. This problem is corrected when I start Firefox in safe mode, but not when I boot normally and disable all addons. Please tell us how to solve this problem. Reseting Firefox and install all add ons still causes too many problems, so I hope to be able to solve this problem without reset.
[url =http://postimg.org/image/uwr2x6x21/] [img] http://S28.postimg.org/uwr2x6x21/space.jpg line / URL
You can also try to delete the file localstore.rdf (resets the toolbar configuration) in the case of its corrupt.
-
Disk space MacAir swallowed in 10 minutes after the start.
MacAir fast - disappearing of disk space!
My problem:
When I turn on my OS 10.6.8 MacAir is about 8Gb available, but in a few minutes, that reduces to zero. Whenever I restart the same thing happen again..... after that 10 minutes maximum available space is zero!
The cause?
I strongly suspect a simple PDF bit that someone sent me two days; I did not notice that he weighed 6.2 Mb, instead of a few KB. He came to me a business, I worked with years, so logically nothing intentional here. I opened it and worked as usual.
The solution?
I been using Macs since 1984 and have a vague idea, I solved this kind of problem once before. With Onyx? But today I really don't know.
Help! I need help :-))
Brian.
Download the Internet OmniDiskSweeper and Grand Perspective (both free) and open them. They will show all your files and respective sizes. Transfer to an external HARD disk or remove files, that you no longer want on your MBP.
Don't forget to empty the trash. Then only the space is allocated for the new data.
If you can't always solve this problem, run OmniDiskSweeper as root. See the instructions at the bottom of this link:
Ciao.
Maybe you are looking for
-
Hello: I have iOS 3 devices: iPhone 6, iPhone 5, iPad Air all with the latest iOS 9.2.1. I bought a Netatmo Thermostat, with the HomeKit technology. In the iPhone 6 there in 'Settings' under the Safari icon HomeKit (configure) icon. BUT in the iPhon
-
Portégé R500-10u: energy-saving - the battery life and screen
HelloI just bought a Portege R500 10u and I fight with the energy saver utility. No matter what I do, when I switch to the power of the battery, the phone tells me that the maximum time I have is 2 hours and 45 minutes - even when I do not do anythin
-
Hello TS 4.1using the batch process model - pre-batch is a two-step 1. tell the dialogue for the next DUT 2. wait for the dialog box. I need to change the #1 step, but still want to use step exsisting #2 - waiting for sous-suite of dialogue. How to c
-
Behavior in time real LabVIEW incompatible with nodes in control property
LabVIEW 2014 no service don't pack cRIO 9068 (Linux) with dual CPU I've written a vi which interacts with the CVT to pass values between the CVT and a bunch of controls on the Panel before which are accessed by reference. My project supports a front
-
Validation for patch of July Wednesday.
Once more there are problems with manual download of the Vista updates especially those requiring a validation. My software is legal and has a legitimate product ID. The sequence is as follows:- try to download KB90586 I get http://www.Microsoft.com/