Cannot add space on a virtual drive?

Similar Questions

• How to add space to the D: drive while extend space is dimm

  After the installation of cleaning that had become indispensable, although my computer, seams now healthy but his unit became full and forthcoming, not only with repeated messages of "Space bass", but also various errors, here and there.

  Among the choices, to increase its space, I chose to increase or remove files to D:. In doing so, I comfortably shrunk C: by 1.25 GB. But the BIG problem is that there is NO way to add this on the D: drive.

  The commands and options in disk management are therefore very obscure and non-understable that, after 10 days of fighting, I'll have to come to your aid. Please do something as you can so that I can add the space unallocated with my D: drive. Otherwise I'm in big trouble; no updates to come; No downloads are possible. I'm sitting with meaningless fight and nothing else.

  my email: * address email is removed from the privacy * 17 October 2012

  Hello

  You can't do what you want to do using the disk of Vista management.

  You can't take a little off-C: and nail it on D:

  And are you sure that D: is not your recovery Partition to reinstall the operating system.

  If it is read this:

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it is not the recovery Partition, Vista for you options to > save data on D: > D: delete > C: extend into the now unallocated space where D: is.

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  See you soon.

• Cannot add Ubuntu host physical hard drive to Windows 7 comments

  When I try to add a physical hard disk to a Windows 7 client on an Ubuntu host, I get the error: "insufficient permission to access file. This occurs if the drive is mounted on Ubuntu or not. In Ubuntu, permissions on records House / < username > / vmware and/dev/sdc have rwx was set by "chmod-r 777 vmware."

  Steps to follow:

  -Launch the Virtual Machine settings
  -Add the hard drive; Use a physical disk
  -Device is/dev/sdc (connected by eSata to the host of Ubuntu)
  -Use: Use the entire disk
  -Name of the disk file: Windows7x64 - 0.vmdk
  -"Finish" produces the error message. Steps to follow:

  The hard drive is connected via eSATA. The error message occurs if the disk is mounted or not in Ubuntu. It also occurs if I try to add a partition, but the folder is/dev/sdc.

  Ubuntu 9.10 64-bit, Windows 7 Ultimate 64 - bit comments host.

  It's probably something obvious to a Linux expert...

  This is expected behavior

  Run WS as root - or try to add your user account to the Group of disks-

• Cannot add ESX/PowerEdge 2950 hard drive

  Hello..  I have a Dell PowerEdge 2950 with a Perc6 / i.  I am currently under VMWare ESX 3.5i using RAID 5.  I added another drive and try to add that, for VMWare.  Looking at the sensors, the UNCONFIGURED GOOD watch drive.  When I try to add through VIC using storage - & gt; Add storage, the disk is not there.  I looked everywhere to try to add this drive but its got the best of me.  What I am doing wrong?

  Ideally, I would like to add to the RAID 5 array, but from what I've read is not possible.  Suffice to just be able to add the period dang by car.

  Help!

  -st

  The boot server and press Ctrl + R and go to group configuration, look at the table manager and add the new virtual disk. Don't try to split the table 5 in place or you may lose your data.

  Bandolero

• When you add items to a project can then remove the clips?  I'm trying to free up space on my hard drive. Thank you.

  When you add items to a project can then remove the clips?  I'm trying to free up space on my hard drive. Thank you.

  Not while you're still editing the project.  When you have completed the project and shared it and are sure that you do not want to do any editing more far, you can delete the whole project.

  If you do a significant amount of iMovie editing you really need to put your libray (ies) on a large external hard drive.  Another thing you can do is to divide your work between different libraries and move those that are not currently on a removable drive.

  Geoff.

• due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted. Cannot synchroni

  due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted on the USB port. Cannot synchronize.

  Hello, manoj0910.

  Please visit Apple support communities.

  Looks like you can't synchronize the pictures located on your external drive.  I need a little more information about your configuration to provide a better answer.  However, we will try to sync your photos through the section of the file through the article below.  You just need to direct iTunes to where your photos are stored on your external drive.

  If your photos are in a folder

  1. Select "Choose a folder" from the context menu.
  2. Choose the folder where you store your photos.
     
  3. Click on apply.

  You can arrange photos in subfolders to create photo albums.

  Sync photos from your computer to your device iOS through iTunes

  See you soon

• Cannot open the Windows Gallery with error message: "you may not have enough space on your hard drive or critical files may be lack of Windows.

  Original title: Windows Photo Gallery problems

  I have a problem trying to open Windows Photo Gallery, when I click on the program tab I get an error message saying: Photo Gallery cannot start. You can have enough space on your hard drive or critical files may be lack of Windows.

  • NO Mahesh B G , is not windows live photo gallery, windows photo gallery & is the message I get "could not open the Windows Gallery with error message: 'You may not have enough space on your hard drive or critical files may be lack of Windows'." Thank you Dave 07/11/2012

  Hi David,

  1. have you made changes on the computer before this problem?
  2. are you referring to the Windows Live Photo Gallery?

  Please follow the methods and mark the question below:

  Method 1:

  Fixed problems with Windows Live Photo Gallery that does not:
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  I hope this helps.

• Does anyone know how I could free more space/add more space to my backup drive?

  Original title: save file/disk

  Dear all,

  As usual, I used part of my hard drive to back up files, etc.

  In my last scheduled backup, windows informed me that he could not perform the cause there wasn't enough space in my backup disk.

  Does anyone know how I could free more space/add more space to my backup drive?

  Thanks in advance

  George

  On Tuesday, October 5, 2010 06:46:38 + 0000, GeorgeMachairas wrote:

  As usual, I used part of my hard drive to back up files, etc.

  In my last scheduled backup, windows informed me that he could not perform the cause there wasn't enough space in my backup disk.

  Does anyone know how I could free more space/add more space to my backup drive?

  Please be aware that the second part of your hard drive backup is
  far the lowest form of backup exists. It is only very
  slightly better than no backup at all, because it let you
  sensitive to the simultaneous loss of the original and the backup on many of
  the most common dangers: drive failure, head goes down, severe feeding
  glitches, near lightning, virus attacks, same flight of the
  computer.

  In my view, secure backup must be on a unguarded and removable media
  in the computer. For backup really secure (required, for example, if the)
  the life of your company depends on your data), you should have several
  generations of backup and at least one of these generations must be
  stored off-site.

  You can read this article on the backup that I wrote: 'save '.
  "Your computer regularly and reliably" to
  http://www.computorcompanion.com/LPMArticle.asp?ID=314

  Ken Blake (MS-MVP)

• Need more disk space to run virtual machines on R710 server with no available drive slots

  Hello

  We have a server R710 with five $2.5 146 each and three 600 GB SCSI disks SCSI.  We have no more slots.

  We want another 2-4 TB of space.   This server is used to run virtual machines to test software applications.  We have need for decent speed, but more important still need a cost-effective solution for running virtual machines.

  The budget would be in the $1000 range give or take.  I might be able to get $3000, but a $10,000 would be too.  We could consider removing disks from 146 GB 5 and replacing them with those larger, but that might not be the first choice.

  Any ideas?

  Thank you!

  What you ask for is really difficult to do within the budget without sacrificing important performance (from what you have right now in performance).

  Any external storage solution (Dell) is out of the question for $3 k (think MD1200/1220).

  The market, 2.5 "drives max out at 1 TB at 7200 RPM, 900 tr/10 k or 300 GB @ 15 k RPM.

  Dell has disks 1 to 7200 RPM 2.5 "company (for PowerEdges) for ~ $440 (see here). These are not the best choice if you want any kind of good performance.

  You might look into upgrading to 900GB 10 k rpm drives. These run $799 each today on the Dell website (see here).

  If you replace one of the 146 both each and let rebuild you could then use the extra space to another virtual disk. This would give about 2800GB.

  If you can't budget 5 of them, according to the current setup of raid, you can watch a backup and restore of the virtual disk of some 146.

  You could:

  -use 2 of the existing 146 in raid 1 for operating system and the extra space

  -use 3 x 900 in raid 5 (which would give a crude 1800 (Go so ~ 1674 usable))

  -Use the 3 600 existing RAID 5 (which would give ~ 1116 GB usable)

• Determine the unused space in the virtual hard drives

  I will determine the unused space in my virtual hard drives.  I want to:

  • Select a virtual machine

  • the first vmdk disk is always the OS disk in this environment.  How much space was put in service, and how much is actually used?

  • The other disks are data application.  What is the total space on these non-OS disks, and how much of this space is actually used?

  Thank you!
  

  You then get the results when you run this adapted version?

  Get - VM |

  Select Name,

  @{N = "Capacity of the system disk"; E = {}

  $_. Hard drives | Where {$_.} Name - eq 'Disk 1'} |

  Select CapacityGB - ExpandProperty

  }},

  @{N = 'Disk system used'; E = {}

  $hdC = get-VMGuest - VM $_. %{$_. Guest.Disks} | Where {$_.} Path - eq "C:\". »}

  [math]: round (($hdC.CapacityGB-$hdC.FreeSpaceGB), 1).

  }},

  @{N = "Another capacity of disks"; E = {}

  $_. Hard drives | Where {$_.} Name - not "disk 1"} |

  Measure-object-property CapacityGB-sum |

  Select sum - ExpandProperty

  }},

  @{N = 'other disks used'; E = {}

  [math]: Round ((Get-VMGuest-VM $_ | % {$_.)) Guest.Disks} | Where {$_.} Path - not "C:\". »} | %{

  $_. CapacityGB - $_. FreeSpaceGB

  } | Measure-object-sum |

  Select - ExpandProperty Sum), 1).

  }}

• Cannot add free space on my Vista Partition.

  So, I try to do a dual boot a bit back and decided that I did not like the other operating system, so I deleted the partition, and I now 28g of free space on the hard drive. Is there anyway to expand my C: volume. When I right click on the C: drive, "Extended Partition" is steamed up outside. Is it possible to format my free space. I even tried to create a new simple volume with free space, and he says that there is not enough space on the disk (s) to do so. Help?

  Delete a logical drive in an extended partition creates 'unallocated free space' only if you also to delete the extended partition the "logical drive" was. Now that you have removed the logical drive, you can delete the extended partition. You should probably use tools that show you more clearly what you are doing. diskmgmt.msc not do enough for you. Mark L. Ferguson MS - MVP

• We try to upgrade Vista Home Basic on an Acer Windows 7 but cannot because there is not enough space on the hard drive.

  We try to upgrade Vista Home Basic on an Acer Windows 7, but does not because there is not enough space on the hard drive C. I have another drive that is empty, hard drive called D data and will not go to it. What I can do. I just spent $ 125 for this upgrade.  Thank you

  original title: try to upgrade to Windows 7

  Hello

  you are posting in the wrong forums

  These are some Vista Forums

  You can read this information to see if your machine is compatibile Windows 7 and repost in the correct Windows 7 forum (link below)

  so eager to upgrade to Windows 7, it will depend on if the manufacturer of your computer/laptop has windows 7 drivers available for your computer/laptop as to whether Windows 7 will work properly on your machine

  check with them

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  _____________________________________________________________

  and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• In Windows 7, is it possible to combine the two partitions of hard drive to add space?

  Installed Windows7 - 2 disks - C and E of data which is almost empty - running out of space on C - both drives can be combined?

  If there is not a lot on drive E, you can move the content to C, and then in disk management

  E delete.

  Then extend C to fill the space E occurred.

  It is also possible with a third party to the partitioning tool without moving anything

• Cannot eject/unmount virtual drive

  I use Windows 8 and I have gotten into a bit of a mess.  Download Windows PE for NovaBackup and has made using the ISO file.

  I first tried to burn it to a CD, but it was too big.  If I remember correctly, I've then simply ejected the CD.
  Later, I was able to mount the file downloaded on a virtual drive and got what I needed for the disk backup starts.
  Now, I find myself with a virtual drive that I can't get rid of.  I think it's related to me trying to burn it on a CD, because the drive itself named CD (i) KB3AIK_EN player.  When I try to eject, I get a message that there is an error the disc is ejected.  I went into the Windows folder temporary Burn and tried to delete the file from there, but the error message said I couldn't because the file has been used by the system.
  Any ideas? Thank you.
  Jaime

  try to do the following:

  Open the Device Manager

  

  Click the virtual driver, and then select the device

  

  Go to Properties and clear the selected device

  

  Result

  

  Uninstalling the driver

  If you want to permanently delete the uninstall option is the quickest way to solve the problem.

  

• Re: How can I add a second internal hard drive to a Satellite Pro P200?

  I have a Satellite Pro P200 with a single internal hard drive. There is a second Bay in the computer of another internal hard drive, but I couldn't find any information about it. There is enough space for a 2.5 "SATA but I do not see a connector.

  I contacted Toshiba Dutch customer service who said that it was official policy not to provide any information on a second internal drive. They also said that they would not provide parts to make it possible.

  Can anyone provide more information?

  Hello!

  I think that if there is no connector you cannot add a second HDD.
  It of Nice to have a second Bay, but it's nothing without a connector.

  Good bye