Add the event handler as the Internet or through prototype?

Similar Questions

• How to add an event handler (to the click or mouseover) symbol on the timeline of the scene

  Is it possible to add an event handler on the main stage anime who controls a symbol?  Thus, for example, if you had several symbols on the stage, each with their own unique name, then on the main stage you wanted to add a list of event handlers specific to these symbols to affect a change when you interacted with this symbol.

  For example when you click on the symbol a few things happen here...

  (1) for (name of the symbol) click starts the animation of the symbol

  2) roll (symbol name) the symbol animation stops

  (3) the symbols background image is set on the main timeline.

  All this can be done easily on the symbol itself, but those is possible since the main timeline (scene).  Anyone know a solution?

  Yes

  1. Add jquery min CDN (https://code.jquery.com/jquery-2.1.1.min.js) to the script library (from the "Add js to URL" option.

  2. in the compositionReady event handler try something like that - the "many event handlers section" located here: http://learn.jquery.com/events/handling-events/

  Code example

  item = sym.$("btn");

  Element.on ({}

  MouseEnter: function() {}

  Do something

  Alert ("gliding on a div");

  },

  MouseLeave: function() {}

  Do something

  Alert ("the mouse has left a div");

  },

  click on: function() {}

  Do something

  Alert ("clicked on a div");

  }

  });

  end of the sample code

  A way to do among many others. In the use above cases pay special attention to the point of separation between the "chained" events

  HTH

  Darrell

• Can not share the internet connection through Wifi

  Hi all

  I am connected to the internet using an external antenna connected via USB to my mac (WIRELESS n 801.11). I want to share this connection since my mac with other devices, i.e. my iPhone. I use the internet connection through system preferences--> sharing--> sharing internet--> connection on the part of wlan to computers via WIFI and give a name and a password for the wifi settings. When I start the connection icon wifi on the the high watch the arrow menu to the top, but it gives an IP address from 169 auto... etc etc and I can't any traffic to my iPhone.

  I tried to configure IPv4 to use DHCP with a manual (instead of automatic DHCP) address and IP I enter the IP address used in the WiFi, wifi says that it is connected to the name of the internet connection in the shared connection, I opened but once again no traffic to the iPhone. Also tried disabling the firewall, once again nothing.

  I run El Capitan 10.11.2.

  Clues?

  OS X El Capitan: share your Internet connection

• Virgin Media UK has changed his ISP address and I cannot add the new address through automatic or manual, how do I do it?

  Virgin used to use google for it's email service has recently created a new ISP of it own. I'm unable to find using the automatic "Add account" in Thunderbird. I tried to do it manually without joy. I can't get into my email account using webmail blank page. Any suggestions please?
  GMN

  Via the Menu bar
  File > new > existing e-mail account
  or
  Via the mail toolbar
  Icon of the menu > new message > e-mail account

  Enter the name
  Enter the full e-mail address
  Enter the password - same one you use to access webmail

  Select this option to remember password.
  Click on "continue".

  Thunderbird tries to search for configuration settings.
  Check: He selected the right account type: POP or IMAP
  Are the correct settings... see info at the link below.
  the manually set/correct
  Click on the button "Manual Configuration".

  See here the setting on the server:
  http://help.virginmedia.com/system/selfservice.controller?configuration=1001 & PARTITION_ID = 1 & TIMEZONE_OFFSET = & usertype = 1 & VM_CUSTOMER_TYPE = Cable & cmd = VIEW_ARTICLE & article_id = 2743

  According to your email... the portion after the @, this will determine what will be the name of the server for POP/IMAP/SMTP.

  Use the "Re-test" button to verify the changes.
  Click 'Done' to create the email account.

• Add the button "submit" through customization

  How to add a button send through customization?

  Add a stackLayout region to the existing page with personalization and all extends the stackLayout property to point to the region you created.

• How to connect to the Internet directly through my Office Firefox icon?

  MSG appears telling me that it cannot connect to my ISP (PeoplePC) home page

  What is a remote access ISP service?

• Access to the operation of the virtual machine guest inside the work-6: 5 on the Internet

  Hi friends,

  I can access virtual (guest computers) running in VMware Workstation 6.5 - 7 on the Internet with vnc viewer? OR with another method.

  Means I want to VM is accessible on the Internet either through "mstsc" (RDP) or "vnc viewer" / If there is another way to do it then pl can help me... "."

  Rishi Sharma | MCSA (Messaging), MCSE, RHCE, virtualization

  The free is enough, just register, install Logmein, add your virtual machine to your account and immediately, you can manage your VM via internet from anywhere. But of course, Pro version included more features. See the comparison

  If you want something more technical, then get:

  (Internet-> IP / domain-> router-> VM)

  1 - IP (dynamic IP use freedns.afraid.org to resolve the field fixed

  2 - port forward on your router for RDP / VNC port to your internal VM (use to recommend different port)

  Note: To add a kind of secure access to your rdp/vnc connection, you can use "openvpn". To do this, you need to port your VPN port forward rather RDP/VNC port so lazy to install, you get just appliance here openvpn server and run it from your desktop/server VMware.

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• Add the new entry name of folder of bookmarks does not

  (There's a reason I'm fool the previous thread on this subject, as well as my response to this: I couldn't find a way to add FireFox 10.0.2 to the tags of the thread.) If the thread tags may be edited/added, I wouldn't highlight problems with FireFox 10.0.2 by launching this new thread.)
  RE add new bookmarks folder, can not enter the name of the new folder:

  I am now having this problem with FireFox 10.0.2, 11/03/2012

  When I click on add a folder, a new folder appears in the tree view and the folder name field is highlighted for the entry. But when I start to type characters in the field, I can only type 1 or 2 characters at the most seized stops accept input. I then go to the bookmarks menu, locate the new folder, right-click it, click Properties and complete the registration of the name of the folder.

  At worst, the folder name field will cease to accept entry as soon as I type the first tank, in which case the name of the folder will remain as "new folder." I find the new folder in the bookmarks menu to change the name, as described above.

  It is very annoying because it adds a number of additional steps just to add a new folder in the bookmarks menu. Add the new folder through the "Show all bookmarks" and navigate through the folder hierarchy are an alternative workaround, but that records all the steps.

  Any ideas or solutions?

  Hi John99,
  It has worked well in Mode without failure. Thanks for the suggestion!

  I'm going offline a bit to understand what add-on, plugin, etc., could be causing it. In the meantime, I have marked your suggestion to use Mode safe as useful so that anyone else coming here could get the clue.

  I should probably drop another line in the thread for the guy who in (or has been) using FireFox 7...

  I'll post my results if I can understand it.

  UPDATE:

  I went after any add-on which had nothing to do with bookmarks.

  It was the first add-on I tried, SortPlaces 1.9.1 that automatically sorts bookmarks in various ways according to the parameters. When I disabled it, the problem disappeared.

  I re-enabled it and checked the options to see if I could understand why she was stop to add the new folder. In the 'Options' tab, there is a time limit for how long interval SortPlaces will wait before you sort a bookmark changed or added. It was set to 3 seconds.

  It is not long enough for old men by typing the new name of folder. I put it in 10 seconds. Then, I created a new folder of bookmarks and start typing a name long nonsense, while I looked at the clock. After that 10 seconds it stopped accepting the entrance, right on the mark. What this hidden for me earlier, it was that when he stops to accept input, you don't see the new folder to place in the position of sorting on the menu add a folder. You will see that if you expand the folder later. It's probably why I didn't connect the two.

  Anyway, problem solved. I'm leaving the delay to 10 seconds. If I ever need to be longer, I'll just increase it.

  Thanks again for the suggestion of Mode safe and enjoy the next season of mud.

  Alan Mintaka

• Unable to connect to the internet via a modem router - Satellite A200

  Thanks to Xardas, I was able to successfully install Windows XP Pro, but not everything is working as it should. Of immediate concern is my inability to connect to the internet (DSL) through the installation of the existing modem router that I use. How can I check that the ethernet drivers work? … My Satellite A200 does not - connect the appropriate port light does not illuminate.

  Oh yeh. I noticed that whenever I start (boot) a "Wizard" pane appears informing me that new hardware was found and that the drivers have not been installed but it doesn't tell me what the new material is! At the same time, there is a separate pane that announces that the drivers have not been installed correctly.

  Of course, I can use the computer as it is, but before letting my wife loose on this subject, I would like to get rid of anything that can give her cause to panic.

  Where are you Xardas?

  Check please the Device Manager and all the entries listed under network adapters. LAN card is listed there?

  Have you installed driver LAN?
  What A200 you exactly (A200-xxx)?

• WRT54G - cannot connect computer wired to the internet through a router

  I have the WRT54G and unable to connect to the internet when you are going through the router.  I feel that I've checked everywhere can, but still does not work.  I connected the way the instructions, the lights are on the case and all that.  I have cable internet and when I plug directly, there is no problem.  When I try to 'ping' to check the connection between my computer and the router, I get "Request Timed Out".  I tried to reset the router and goes in this direction, but I can't go beyond checking the internet connection through the router.  Any ideas what I'm missing?

  Thank you!

  You should not use the installation CD at all.  If you throw it away.

  See here for the installer of cable.

• Unable to connect to the internet through hp5510 printer

  As the subject line says:

  It's a printer Photosmart 5510. It prints and scans perfectly and all four laptops I installed it, the hp update downloaded software.

  When I first set up the printer, I was able to access additional applications online. After about half an hour, I lost the internet connection through the printer.

  I had installed using the automatic ip address selector and he gave me an address of 169.254.xxx.xxx.

  I have re-configured manually with a 192.168.xxx.xxx and even if the printer was working well with the PC it still wouldn't connect with internet.

  I have reset to factory settings and automatically and manually configured without success. Also, I restarted my router and changed the wireless channels.

  I can not yet use the eprint service anddownload any apps.

  My son tried to use a proxy, but it still wouldn't connect.

  As I said... .it worked for a short time and then stopped.

  Is there any solution for this?

  Thanks for any answers

  Hello

  Please try to manually set the DNS addresses in the EWS page:

  From your web browser, go to the EWS by typing the IP address of the printer.

  Enter the network tab.

  Click Network

  Click on the network (IP) address

  Under the DNS address Configuration, select manual DNS server and provide the following parameters:

  Define DNS preferred as 8.8.8.8

  and the alternative e-mail address 8.8.4.4

  Click on apply and try to access the Web Serives again.

  If the connection still does not work, and that the configured proxy address, enter the Web Services tab.

  Click the Proxy settings.

  Uncheck the option button, make sure that any field is left blank and click on apply.

• How to disconnect CC for connection to the internet? FACT DELIVER ALL THE CC SLOW PROGRAMS

  Hello

  Yesterday, I finally brought the CC, but unfortunately I do not have

  could use inside in all it's glory it runs very slowly.

  THIS ISN'T DUE TO A PROBLEM OF MY PC.

  When I ran Adobe Illustrator, it was extremely slow and laggy.

  I suspect it's because of how the CC connects to the internet,

  First of all, I would like to try to make the CC so I extremely slow internet

  stop automatically connect to the internet, because it's more like problem,

  I already turned off file synchronization.
  

  I'm open to other troubleshooting, but this is probably my problem, HOWEVER

  don't tell me trying to close other programs and as my PC is more than capable of

  running several things at once.

  Specifications of the PC:

  •Windows 10 home

  •Gigabyte GA-Z97X-SLI Motherboard

  •GeForce GTX770 4GB

  •Processeur Intel i7-4790 to 3.60 GHz

  •Kingston 16 GB of RAM

  •Cooler Master 700W G series Bronze PSU

  • Kingston SSD 120 GB

  • Seagate 1 TB HARD drive

  •Corsair H100i CPU cooler of water

  UPDATE:

  
  It seemed to have improved speed of the program very much,

  by disconnecting the Internet access through windows firewall.

  If you have any other recommendations to speed up the program

  even more of his personal experience please comment below.

  Thank you

• Configuration in the event handler scripts

  Hi guys,.

  This is my first question here.

  Please forgive me if I have some grammar errors.

  I'm building a plugin for Photoshop CC which includes several scripts jsx and a Panel of the HTML of the CEP.

  In my plugin I would activate a script jsx on all the actions that the user is within the app.

  I managed to achieve using the Script event handler and parameters of my script to run the event "Everything" (see image below).

  My question is if anyone knows how I can configure my jsx script in the handler automatically during the installation of my plugin.

  I'm not talking about copy the script in the destination folder (settings presets/scripts /).

  The flow I'm looking for is as follows:

  1. The user install my plugin from https://creative.adobe.com/addons
  2. Activate user the plugin by going to Windows-> Extensions-> MyPluginName
  3. When loading my CEP Panel, he calls a script jsx (which is included in the plugin).
  4. The jsx (from the 3rd stage) script sets another jsx script (which is also included in the plugin) to operate on all the actions that the user makes the Photoshop app.

  I need an automatic solution to the fourth step. Anyone...?

  

  P.s

  I am familiar with the events Manager.xml Script file, but the addition of my script to the list is a partial solution.

  I am looking for a fully automatic solution in the background.

  app.notifiersEnabled = true;
  app.notifiers.add( "All ",new File('path/to/your.jsx') );
  

• The onDeactivate event handler does not work in InDesign CC. Why?

  Hi guys.

  I'm working on a script in Javascript for InDesign CC.

  The big problem is that the onDeactivate event handler does not work.

  Here is an example that works in InDesign CSx, but not in InDesign CC:

  #target indesign
  var w = new Window ("dialog", "Test onDeactivate");
  var et_1 = w.add("edittext", [undefined, undefined, 300, 30], "Lorem ipsum");
  var et_2 = w.add("edittext", [undefined, undefined, 300, 30], "Dolor sit amet");
  var st = w.add("statictext", [undefined, undefined, 300, 30], "CONSOLE:\r\r", {multiline: true});
  et_1.onDeactivate = et_2.onDeactivate = function(){
       st.text = "CONSOLE: I left the field with this text:\r\t«" + this.text +"»"; }
  var b_ok = w.add("button", undefined, "OK");
  w.show();
  

  The script displays a dialog with text edit fields window 2: when a field loses focus (by clicking on the other), the "CONSOLE" shows the text of the old domain.

  Adobe, please, solve this problem as soon as possible.

  Thank you.

  Giorgio

  This is a bug, and it has been reported. Please report it to yourself, more the better reports. It's no good Adobe invite you in this forum to fix something.

  Peter

• [JS CS5] problem with memory leak possible with the dialog box in the event handler

  Hello

  I'm having a very difficult problem.

  I am attaching a script in a handler for a menu item, by using an installation script menu that I wrote based on one by Marc Autret. My version of the script menu installation attach a bunch of event handlers at the same time, to the actions of different menu.

  What is the event handler, with that I have a problem is to prompt the user for a URL and then applies the URL as a hyperlink to the text selection, with our house style for the way in which the URL should look like.

  The problem is the following:

  1. all other installed menu actions work very well, except for this one.

  2. the addition of URL script works fine, when you run it directly from the script menu.

  3. the combination of #1 and #2 (using the script to add URL by function as an event handler in the Edit menu) blocks to InDesign. But it is only after the addition of URL script has finished and done what it was supposed to do!

  4. when I comment on the section of the script URL adding user input, so that instead of saying

  userInput = myDisplayDialog();
  

  It is said

  userInput = "http://thisworks.com";   // userInput = myDisplayDialog();
  

  It works well as an event handler.

  So obviously a problem with the dialog box, but only when adding URL script is executed as an event handler. My first guess is that this is some kind of memory leak, but I think I am following the model of. destroy() the way I saw it elsewhere.

  Someone knows something like that before?

  I can provide all relevant if necessary scripts, but they are quite complicated. The most important of them is the input of the user function. Here it is:

  var myDisplayDialog = function( defaultText ) {
    
      var defaultText = defaultText || "";
      
      var myDialog = app.dialogs.add({
          name: "Type in a URL"
      });
      
      var myOuterColumns = [];
      var myInnerColumns = [];
      var myOuterRows = [];
      var myBorderPanels = [];
      var myTextEditboxes = [];
      var myInput;
      
      myOuterColumns[0] = myDialog.dialogColumns.add();
      myOuterRows[0] = myOuterColumns[0].dialogRows.add();
  
  
      myBorderPanels[0] = myOuterRows[0].borderPanels.add();
      myInnerColumns[0] = myBorderPanels[0].dialogColumns.add();
      myInnerColumns[0].staticTexts.add({
          staticLabel: "URL:"
      });
      
      myInnerColumns[1] = myBorderPanels[0].dialogColumns.add();
          
      myTextEditboxes[0] = myInnerColumns[1].textEditboxes.add({
           minWidth: 300,
           editContents: defaultText ? defaultText : "http://"
      });
      
      var myResult = myDialog.show();
      var myInput = myTextEditboxes[0].editContents;
      
      myDialog.destroy();
  
      if (myResult == false) {
            exit();
      }
      
      return myInput;
  
  }
  
  

  Hi Richard,

  Unfortunately, there is no guarantee that the ScriptUI longer work.

  Thake a peek here: http://forums.adobe.com/message/2881364

  --

  Marijan (tomaxxi)

  http://tomaxxi.com