Add the screen makes RoboHelp close.

Similar Questions

• My Macbook has big bumps and the screen does not close.  Can it be fixed?

  Previously, a fallen friend my 2013 non-retine Macbook Pro 13 inches on one floor wood to six feet in the air.  After the landing, my laptop proceeded to bounce back, and when I picked it up, he had a gargantuan tooth in the DVD player (see these images: http://imgur.com/a/CDg3R). I also noticed that the screen closes nor completely, even when I press on toward the bottom.  Y at - it repairs I can do?  Or is it better for me to buy a newer, more stylish mac?  What is the least expensive?  Thank you!

  Bend it back... with care. We could break it. Even if you do not, the result will be ugly... but it will be a character.

  Or is it better for me to buy a newer, more stylish mac?

  If you want to know whether it pays to pay Apple to fix it, the answer is that such a remedy will be almost certainly economically unjustified. I suggest Flex things up, so that you can continue to use it.

• My cursor takes the form is no longer the hand icon to slide the screen down to close.

  Is no longer my cursor becomes a hand icon to drag the screen and I am unable to do it now.  Activate master to delete to close the active screen. In addition, there is no way to access the menu on the right to search, close, etc.. A way to solve this problem?

  Hello Mikal,

  I understand the inconvenience caused to you. I will try to help you in the matter of fixing.

  In order to understand the issue more clearly, I would ask that kindly provide me with the following information.

  1. Did you do any hardware and software changes to the system?

  2. Since how long you are having this problem?

  3. Do you receive an error message? If Yes, what is the exact error message?

  It is possible that this problem would have occurred due to corruption in the mouse settings in the system.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the built-in convenience store equipment and devices and check if it works. Follow the steps below.

  Note: If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  1. Press Windows key + R, type Panel.

  2. Type of Troubleshooting in the search bar, click Troubleshooting.

  3. Click hardware and sound, click on material and devices.

  4. Follow the steps in the wizard to run the troubleshooter.

  If the problem persists, please follow method 2.

  Method 2:

  Please follow the steps below and check if it helps.

  1. Open the "Start" menu by clicking on the Windows logo in the corner of your screen. Click on "Control Panel."

  2. Click the box in the corner of the window titled "Search Control Panel" and then type "mouse". The window will automatically display search results.

  3. Click on the word "Mouse" in green text to open the "Mouse properties" window

  4. Click on the tab "pointers". Under 'Customize', the window shows your current mouse icons.

  5. Click on 'Select Normal' to highlight and press the button "Browse".

  6. Scroll the list of available cursors and find the files named 'aero_link,' 'aero_link_l' and 'aero_link_xl '. These files contain icons of the hand in three sizes, from the smallest to the largest.

  7. Click on the file of the icon of the desired size. Press the button 'open '. Repeat this process if you want to change all other cursors. For your pointer still resemble a hand, do it for each other cursor on the list 'customize '.

  8. Press the 'Ok' button when you are finished editing all the sliders. The system will immediately change the appearance of the pointer of your.

  For reference:

  Please refer to the procedure described in the article below and check if it helps.

  Search, touch, & mouse

  http://Windows.Microsoft.com/en-us/Windows/search-touch-mouse-help#touch-mouse-search-help=Windows-8&V1H=win8tab4&V3H=winvistatab1

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• BlackBerry, Blackberry Q5 Q5: Verbal announcement of what is on the screen, can not close the applications by typing, cannot access settings

  Hello

  This mornign I had a surprise. For some reason the phone seems to freeze when I open facebook. I thought who would be corrected by restarting, but facebook would be available temporarily and then it would freeze. The same thing happened with everything I opened on the Q5.

  In the end, the phone seems to be put in place for people with a visual impairment. Whenever I touch the screen, and then even when I want to reconnect, there would be verbal instructions and descriptions of what is on the screen. For example, I received the instruction to slide up to open a session, and then whenever I touched one of minimized applications the phone would be such which program it is and what number it is out of the apps on screen.

  Is there a shortcut on how to disable this setting?

  Or what I can do to regain access?

  Thank you

  Hello

  From what you describe, it seems that somehow you have turned on the functions of "accessibility". Go to settings > accessibility and check all those involved to be sure of anything you want.

  Good luck!

• Satellite A200 - 1 M 8 close and then open the lid of the screen to start to work

  Dear community,
  A few months ago my screen has stopped working. I took an external display and worked this way. (laptop screen did not work at all, even not toshiba logo)
  All until once, I turned on my laptop, closed the lid and then he fired after 5 seconds (when all lights on), the screen worked normally.
  Since then, I realized that I have to do this procedure every time I am switch on, or way the screen does not work.

  So I have to close the lid and reopen it after 5 seconds (not less), whenever I turn on my laptop. It works like this for months already.

  Does anyone have a solution to this problem?

  Hello

  The FN + F5 key combination switches between monitors.

  Have you used this combination to test the display button?
  To be honest I m not very well if this key combination would be useful because it sounds like a problem with a display ON / Off switch (sensor).

  Usually such switch turns on and off the backlight of the screen if you close the lid

  This is why I would recommend this audit, but of course it's work is a technician for laptop

• A downloaded Pdf file of a manual of guard appearing on the screen, after that I closed a site I visited even if I deleted the download. How can I stop it

  The download of the Calibre manual appears on the screen whenever I close a Web site. I deleted all references to the manual of the caliber of my computer, so I guess that Firefox is accessed whenever I have access to a Web site. Could it happen? In any case how can I stop it?
  Thank you for your support.

  Thanks again for your response. I think I solved the problem. It seems I had inadvertently "pinned" manual. If I managed to find, and then click the option "detach", he was no longer listed.
  Kind regards
  Estelle

• The screen backlight not working anymore on Satellite M

  Hello

  I have a problem with my laptop screen. The backlight of the screen does not work no matter how suspect more and I switch that turns off the screen when I close my laptop is broken.

  When I press the power button and release, a fast and light the backlight flash can be noticed.
  Does anyone have a solution for this so I can fix it myself?

  Thanks in advance, Stephan

  Hello

  I wouldn't recommend trying to fix it yourself if you n t have any experience with the laptop repair and do not be angry with me, but it seems that you don t have this experience
  In this case contact a technician and explain the problem

• taskbar disappeared. Impossible to find on the screen

  My taskbar and the top address bar disappeared.  Cannot find on the screen.  Cannot close the program or go back.  The only time wherever they are present, it is if I use the Task Manager.  Happened 2 days ago was OK in PM, gone the next morning.  Never happened before.  Suggestions?

  Hello

  Please try restarting the Explorer:

  • Open the Task Manager (Ctrl + Alt + Delete, click Start Task Manager)
  • Click the PROCESS tab & and right-click in the Explorer (in the neck of the image)
  • Click on "end process."
  • Click on FILE (upper-left)
  • Click on NEW TASK
  • Type "explorer".

  Kind regards.

• Tecra 8100: the screen is blank

  Several of my 8100 s Tecra have a problem with the screen going blank. They can be good for centuries, or 3 / 4 times in a minute, it can happen. Anyone know what is the problem or knows how to fix? Does not seem to matter the amount of ram it is or how big the hard drive is that it still happens. For now all I can do is press the button of the screen or open/close the cover of the LCD screen.

  Hello

  Is it possible that you have activated a screensaver on your units? But it strange s happened several times in the minute

• Dell S2340Mc monitor has a red tint and lines to travel to the top of the screen

  I have a Dell Latitude E6430 with Windows 7 Enterprise 64-bit with SP1 docked to a Dell docking station. I have two Dell S2340Mc IPS monitors - both are at a resolution of 1920 x 1080 as recommended by Windows. The problem started this morning.

  The monitor is 10 months old and has developed a reddish hue with lines travelling to the top of the screen makes it difficult to see anything. I tried using another cable DVI, a different port on the docking station, as well as VGA cable. I also updated the drivers and put my other Dell Monitor (identical) to be the main monitor-no difference. My other Dell Monitor (identical) is very well...

  I also did a factory reset and run the LCD function - this conditioning Panel is shot.

  The monitor model =, short publication line pattern description
  Body =
  * What is the serial number of 20-digit alphanumeric monitor? CN - 0293M 3-64180 - 33U - 1U3T
  * What is the revision number (A00, A01, etc.)? A00
  * What specific model of computer, desktop/laptop? DELL LATITUDE E6430
  * What operating system? WINDOWS 7 ENTERPRISE 64 bit WITH SP1
  * Which video card? DOCKING STATION VIDEO CARD
  * Which ports are available for the video card? 2 2 HDMI, 1 HARBOUR VGA AND DVI
  * Which video output from the video card port video on the port monitor do you use? DVI TO DVI
  * What cable are you using to set the video card to the monitor? DVI CABLE
  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. The resolution must match the monitor'S default resolution-IT
  * Brief description of the problem monitor? THE TINT REDDISH WITH LINES TRAVELLING TO THE TOP OF THE SCREEN

  You see problems when you run the SUBMISSION (built-in Diagnostics), pages 25-26? If so,.
  * Back to the top of this Forum to monitor
  Open the monitor "FAQ".
  * Open "monitor and safety guarantees.

• Click on the screen blackBerry Smartphones PRIV

  I just got a new unlocked AT & T PRIVATE today on Amazon, and the screen makes a rattling noise when they are hit.  On the web, there are a lot of people reporting a similar issue, suggesting turn the phone to try to fix it.  This has not worked for me.

  Is it just a matter of getting a bad or a phone that has not been produced recently? Or PRIVs all will have this problem, even if they are not immediately, because of poor design or manufacturing?

  Hello

  Not all PRIVATE have this problem, but there is no way to predict the outcome for you. Your best bet is to contact free support of PRIVATE formal BB:

  • https://supportforums.BlackBerry.com/T5/smartphones-Priv-DTEK50/need-Priv-support-call-us/TD-p/31671...

  Good luck!

• Camera does not work after you reduce the screen brightness

  Hello

  I have an application that uses the camera in QML. It works fine, but if the screen fades while my application is open the camera no longer until I restart the application.

  Here is the page of qml any camera:

  import bb.cascades 1.0
  import bb.cascades.multimedia 1.0
  
  /**
   * Most of this code was copied from:
   * https://developer.blackberry.com/cascades/documentation/design/camera/taking_a_photo_with_the_front_...
   */
  
  Page {
      property string pictureLocation: ""
      function closeCamera() {
          createReportNavigationPane.cameraClosed(pictureLocation)
          pictureLocation = "";
          saveID.enabled = false;
          sheetCamera.close();
      }
      titleBar: TitleBar {
          acceptAction: ActionItem {
              title: qsTr("Save")
              id: saveID
              enabled: false
              //title: "Save"
              onTriggered: {
                  closeCamera();
              }
          }
  
          // The 'Cancel' action
          dismissAction: ActionItem {
              title: "Cancel"
              onTriggered: {
                  pictureLocation = "";
                  closeCamera();
              }
          }
      }
      onCreationCompleted: {
          // Check to see if any cameras are currently accessible.
          if (camera.allCamerasAccessible) {
              // Open the rear camera.
              camera.open(CameraUnit.Rear);
              camera.isOpen = true
          }
      }
      Container {
          layout: DockLayout {
          }
  
          // The Camera object.
          Camera {
              id: camera
              preferredWidth: 768
              preferredHeight: 1280
              objectName: "camera"
              property bool photoBeingTaken
              property bool isOpen: false
              onTouch: {
                  if (event.isDown()) {
                      if (photoBeingTaken == false) {
  
                          // Take a photo, and automatically
                          // save it to the file system.
                          camera.capturePhoto();
                      }
                  }
              }
  
              // The following are examples of slots that can
              // be used with the Camera object to handle
              // the various signals that are emitted.
              onCameraOpened: {
                  // Once the camera is open, start the viewfinder.
                  camera.startViewfinder();
              }
              onCameraOpenFailed: {
                  console.debug("Camera cannot open");
              }
              onViewfinderStarted: {
                  console.debug("Viewfinder has been started");
                  photoBeingTaken = false;
              }
              onViewfinderStartFailed: {
                  console.debug("Viewfinder could not be started");
              }
              onPhotoCaptureFailed: {
                  console.debug("Photo could not be taken");
                  photoBeingTaken = false;
              }
              onPhotoSaveFailed: {
                  console.debug("Photo could not be saved");
                  photoBeingTaken = false;
              }
              onPhotoSaved: {
                  saveID.enabled = true;
                  photoBeingTaken = true;
                  console.debug("Photo has been successfully saved");
                  photoBeingTaken = false;
                  console.log(fileName);
                  pictureLocation = fileName;
                  var imageName = pictureLocation.substring(pictureLocation.lastIndexOf("/") + 1);
                  var imagePath = "/accounts/1000/shared/camera/" + imageName;
                  cameraPreview.imageSource = app.getCameraPreview(imageName, imagePath);
              }
          }
          Container {
              layout: StackLayout {
              }
              leftPadding: 10.0
              topPadding: 10.0
              Container {
                  preferredHeight: 200
                  preferredWidth: 200
                  horizontalAlignment: HorizontalAlignment.Left
                  Container {
                      verticalAlignment: VerticalAlignment.Center
                      ImageView {
                          id: cameraPreview
                          verticalAlignment: VerticalAlignment.Fill
                          horizontalAlignment: HorizontalAlignment.Fill
                          scalingMethod: ScalingMethod.Fill
                      }
                  }
              }
          }
      }
  }
  

  Thank you

  Gerry

  so, there is a signal of cameraResourceReleased which you can listen to that will tell you that the camera has been arrested.

  After that, you can restart the viewfinder after your application is in the foreground.

  We have a corner case that we are still working on what centers around the case when the screen starts to close (causing the camera to stop), but the user he wakes up before the browser tells your application in the background.  In this case, you may not receive a leading event.  You can probably work around this case by launching a timer and check, after a second or two, if the application has been deleted original or not... If it is still in the foreground, then you could try restart the viewfinder

  See you soon,.

  Sean

• PSE 14 fit to the screen does not

  I've recently upgraded to PSE PSE 12 14 (on my Mac mini). Just after I upgraded the "fit to screen" in the menu display, stopped using the full editing window. Also when you open an image it didn't open not as large as possible. Then, something happened to this problem (I don't know what changed). Now a few weeks later it broke again. When I open an image there is a grey border and I can expand it at least two times before that it exceeds the size of the editing window. Using "Fit to the screen" makes the smaller image that the editing window. What is the problem and how can I solve this problem?

  How do fit you on the screen?

  You'll see > on screen, by double clicking on the hand tool icon in the Toolbox, Cmd-0 or...?

  Maybe reset 14 pse preferences will solve the problem.

  Go to the Adobe Photoshop elements editor > Preferences > general, click Reset on the next launch preferences and restart the editor PES 14.

  

• CTRL/0 gets "worthy on the screen", but that it reverses?

  I use CS3, but I think it is the same in other versions.

  View > Fit on the screen (or Ctrl + zero) works very well.  But how you go back to the previous state?  CTRL + Z does not do

  Window > arrange > new window, set it to adjust the screen and then close when you are finished with it. If you do a lot, do an action of it.

• I have a dell inspiron 1525, the screen goes black every few minutes. I have to close the lid and open it to make the screen come back. any ideas?

  Screen goes black every few minutes. have to close and open cover return the screen.

  Hello

  1. on what application is the problem occur?
  2. the hard drive spin when your screen goes black?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  I suggest that you update your display drivers and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 2:

  Test the issue in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step 3:
   
  If your computer works fine in safe mode, then there must be a third party software that is causing the problem to occur, this is why I suggest you put your computer in a clean boot state.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Note: Put your computer in normal mode (step 7).