Add the second number of logical unit of QLogic FC HBA

Similar Questions

• Move the file to the vm to a logical unit number to another logical unit number

  How can I move a vm folder in a logical unit number to another number of logical unit to a remote domain with powercli controller?

  the virtual machine is not registered in vc

  Hello, tdubb123-

  You can use the cmdlet Copy-DatastoreItem of PowerCLI, who has a "-Recurse" parameter to copy all the child elements.  For example:

  Copy-DatastoreItem -Item "vmstore:\myDatacenter0\myDatastore0\someVMFolder0\" -Destination "vmstore:\myDatacenter3\myDatastore2\" -Recurse
  

  "He uses the PSDrive" vmstore:------", which gives access to centres of data/connecting to VIServer default data warehouses.  If you go between vCenters, you can use the ' vmstores:------"PSDrive, which allows access to these objects in all VIServers to which you are connected in this particular PowerCLI session.

  Once you are satisfied with the integrity of the files after copying, you can delete the folder of elements from the original location using the standard Remove-Item cmdlet.  Enjoy.

• Available to add the second internal hard drive to 17-e117dx

  Hello

  Can you let me know, if there is provision to add the second internal hard drive for HP Pavilion e117dx 17.

  If so, one) is there requirments or the specifications of the hard disk (any make or model); (b) what equipment will be needed and where I can get to and c) Finally will be doing so make sure the warranty of my laptop HP Sub

  HP Pavilion

  Product: F9J38UA #ABA

  Model: 17-e117dx

  Thank you

  Not in the way you probably do. Here is the Service Manual:

  Manual

  See Page 50. Unlike the Envy 17 and Pavilion dv7, Pavilion 17 has that a single hard drive Bay. The only way to add a second hard drive is to remove the DVD (optical drive) and insert a DVD to the hard drive bay adapter. The manual shows how to remove the DVD player and you can buy the adapter at amazon.com or jacobsparts.com. Note that this is a 9.5 mm thick disc, not a 12.7 mm. Both types are available. I do not recommend the adapter DVD player solution because you lose the use of the optical drive, and also because the interface of optical drive is usually not as fast as the main hard drive interface. Always fast enough for simple storage and you can run a video of her, but you do not want to edit the video of this disc, for example.

  https://www.jacobsparts.com/items/HDDBAY-02/

  If you decide to go the route of adapter DVD I would buy a large capacity 5400 RPM SATA 2.5 inches wide and drive hard thickness 9.5 mm. No sense in buying a reader more expensive high-performance.

  http://www.Newegg.com/product/product.aspx?item=N82E16822178006

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• The calculator program working if the second number is more than 1 digit.

  I was setting up a calculator on labview, which works except for when I entered that a second number of the calculator does not have the correct value if the second number is more than 1 digit. I think it's down to the use of shift registers and result of the operation is forgotten when a key is pressed. I joined the program, if someone could confirm that this is the problem / suggest potential ways around this problem that would be a great help

  RavensFan wrote:

  Use default if Unwired.  Several of your tunnels are defined in this way, including the orange wire (double-precision) where you store your first operand.

  If you run an event where a wire is not connected through the tunnel will display by default (empty for string, double zero) and the shift register will then forget what he was originally in it.

  I think you meant not to use the default value if Unwired?  I think you have to tell him to use linked entry Tunnel--> Create and wire Unwired cases instead?

• I have purchased Adobe Design Standard CS6 2013 with serial number, but can't find the to no download on a new mac laptop. When I try and add the serial number to 24 digits on my account it doesn't seem to work?

  I have purchased Adobe Design Standard CS6 2013 with serial number, but can't find the to no download on a new mac laptop. When I try and add the serial number to 24 digits on my account it doesn't seem to work?

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• Advanced conditional action does not work when I add the second condition

  I use CP 8. I can't understand why I'm running on this problem. I have a series of If-Then conditional actions, but I am running into problems. I narrowed down it to this problem.

  It is a simple check box that must show either the box or not.

  

  As long as I have only one condition, it works fine. As soon as I add the second condition, it stops working.

  

  Any suggestions? I appreciate the help!

  Rick and I tried to explain that a conditional action is always executed completely. This is the reason that the second decision has been reset what had been done in the first in your first question. I have a lot of articles on my blog where I point out that bad sequence in the decision (or) is causing most of the problems with conditional advanced (shared) actions.

• During the whole until I chose the trial/subscription instead of the serial number, how do I go back and add the serial number?

  During the whole until I chose the trial/subscription instead of the serial number, how do I go back and add the serial number?

  Open acrobat > click Help > activate.

  If you don't see this option, but rather see help > connect, uninstall that acrobat, clean (Download Adobe Reader and Acrobat tool - Adobe Labs) and then install the version without a subscription.

• Add the second NETWORK card to vSwitch

  I'm working on trying to add to install a second NIC physical to the vswitch which is installed by default when ESXi. I use the code below, but when I run it, it disconnects in fact the main physical network card and of course, I then lose connection. I tried different varients of this and even finished by adding a port of vmk, which I didn't do. I just want to add the second network card as a standby card network.

  #Add second NIC to the virtual switch
  $nic = Get-VirtualSwitch -VMHost $currentHost -Name "vSwitch0"
  Set-VirtualSwitch -VirtualSwitch $nic -Nic vmnic1
  

  The cmdlet Set-VirtualSwitch accepts a string array as the value of the parameter - Nic. So you should be able to:

  #Add second NIC to the virtual switch
  $nic = Get-VirtualSwitch -VMHost $currentHost -Name "vSwitch0"
  Set-VirtualSwitch -VirtualSwitch $nic -Nic vmnic1,vmnic2
  

  Best regards, Robert

• I can't add the phone number to iMessages on my desktop

  I get messages from people on my phone also used to appear on the iMessages on my desk and I see now that I can choose only add e-mail addresses to iMessages on my desktop. Is it possible to add phone numbers? I used to be able to do and now it is missing and I get a LOT of messages on my phone number.

  Dave

  Hello

  On the iPhone, make sure that the Send and Receive messages indicates the active phone number.

  Make sure that the iPhone and Macs use the same Apple ID and that they are marked Active.

  Try logging (Sign Out) of the Apple ID on the iPhone and then wait a few minutes before adding it back.

  This should trigger the pop ups on the Mac to accept that the Mac is aware of the iPhone number (again).

  

  20:07 Friday; September 23, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Is it possible to add the second cooler to my QOSMIO

  I WOULD LIKE TO ASK IF IT IS POSSIBLE TO ADD THIS SECOND COOLER TO MY LAPTOP * (TOSHIBA QOSMIO - X 300 130) BECAUSE MY LAPTOP SHUTSDOWN WHEN I PLAY GAMES...
  * PIC ALL WHAT I want TO SAY... * http://www.irisvista.com/tech/laptops/Toshiba-Qosmio-X305/big/removing-laptop-motherboard-33.jpg

  AS I HAVE SEE YES BUT WHERE CAN I FIND ONE SUCH COOLER IN YM (BULGARIA)
  EVRYTHING STILL IN WARRANTY

  Post edited by: aloushi

  Hello

  No, it s not possible to add a second cooling fan to the motherboard notebook from the motherboard layout allows and the laptop does not have such extra part.

  But you can test some buffers cooling like this:
  [Photos of cooling pads: http://www.google.de/images?hl=de&q=cooling%20pads&wrapid=tlif130302876 790621 & um = 1 & ie = UTF-8 & source = og & his = N & tab = wi]

• Is it possible to add the second graphics card for this model Y510p?

  I've been doing mixed responses from customer service chat lenovo so I'm posting my question here. Recently, I bought this laptop. It comes with a single graphics card. I heard this model has ultrabay and you add another graphics card. My question is - is it true that you can add a second graphics card in this system by using ultrabay? Please let me know. I'm confused if SLI and ultrabay means the same thing. If this is the case, then this system is not sli. I appreciate your help.

  http://shop.Lenovo.com/us/en/laptops/LENOVO/y-series/y510p/?SB=:000001 C 9: 00011E0A:

  Also, don't forget to find the extra $20 or sometimes $50 discount code for the Lenovo y510p and apply it to the Fund. The time I bought my laptop I used the code USPY5168320, you will find a similar code if this does not work.

• Add the second disc

  I can add a second drive in a HP ENVY 17-J190NB

  Best regards

  lucvg

  Yes, and here is the part you are looking for:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=542

  Here is a video showing how do:

  https://www.YouTube.com/watch?v=wx3dMGXrGCc

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Add the second hard drive to HPE-400Z

  I am trying to add a secondary hard drive to expand the storage space that I only have 10% of free space on the current.

  "Will buy one online" Seagate Desktop drive HARD 2 to 7200 tr / MIN SATA 6 Gb/s 64 MB Cache 3.5 "-drive retail Kit internal (STBD2000101)" enters the cage OK? Existing drive is Seagate 1 TB guess so, but do not get it and discover it doesn't work.

  This disc has new SATA data and power cables.

  It is clear that there is a free connection of motherboard "SATA2" for data, I can see it. Sounds easy.

  What I can't understand is where and how the POWER cable is connected to... or what might be able to be used which already exists for power connectors in the office. There is a certain and they all have beautiful marking... "P3,"P8",...".

  I found instructions on installing hard drive on HP site... everything is clear for me except for this problem of power cable.

  Did he help me with that?

  GWRootjr, welcome to the forum.

  This is an adapter 'Y' which should solve your problem:

  http://www.Walmart.com/msharbor/IP/24359037?wmlspartner=wlpa&adid=22222222227017782207&wl0=&WL1=g&WL2=t&WL3=40881390152&WL4=&wl5=PLA&wl6=78811224272&Veh=SEM

  You can connect a SATA power cable to do two on one.  This will allow you to connect the second HDD.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Add the second drive to ATC - 780

  I just purchased an ATC-780-UR61 with a 2.5 ssd "standard that I would add as a second disk as the startup disk and use the disk of 1 TB for storage. Now, I understand that there are only 2 SATA connectors on the motherboard - the one used by the 1 TB drive and 1 by the dvd player.

  Is it possible to add a second drive on this PC? I read some other models have a m2 connector to add a ssd drive to, but I don't see any documentation that the ATC-780.

  I can confirm:

  NGFFM1 m2 SSD connector

  It is on the right side of the motherboard near the SATA 2 ports.

• Add the second server to

  I know this may sound like a matter of "DUH"... How can I add a second server to my closed vWorkspace?

  Currently I have a RDSH server with vWorkspace 8.0 on it (running Win Serv 2008 R2)

  I have a need to get a Server Terminal Server 2003 32 bit in the mix and want to publish an application from THIS server.

  I got it when I connect to AppPortal it shows the application of the 2K 3 server. However, I have some Terminal servers error message; However, AppPortal will launch applications on the original Server vWorkspace

  Hi Mike,.

  If you know the password you used then the remaining details can be found by running the tool ODBC Admin on the Windows Server 2008 is configured correctly. You can use this to look at the correct settings without making any changes. There is no default value as such since the database server and database name are specific to your environment.

  Concerning

  David