Add the space from one partition to the other

Similar Questions

• How realocate the space from one partition to the other?

  realocating partition

  The hard drive on my computer has ben partinionned in C & D drives, but simple has been used on the D drive and I want to reassign most of the volume on drive C, is it possible & how do I do? I do not use the D drive.

  Hello

  You don't tell us what operating system you are using.

  With Windows Disk Manager, you are limited to what you can do.

  You cannot transfer a part of D: to C:

  To increase the size of the C: > back up your data on D: > then delete D: > and then extend C: into the now unallocated space where D: is.

  Here is a tutorial on how to do this under Vista:

  "How delete and extend a Partition with Vista disk management"

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  See you soon.

• How to move free space from one Partition to the other?

  I first got this computer (Dell, Windows 7) I had two I had two partitions, a C drive which had 50 GB and a D drive that had the rest of my 500 GB (approximately 397). now my c drive it filled and I can't get it all files to move on go drive D, then it's like I don't have any space left on my computer. I tried to reduce the amount of GB that were in the D drive, but it won't let me expand the fill c. and I can not just delete the D drive eather because I have files on there that I had to move to the course. is there a simple why i can shrink the D drive and extend the C drive?

  Another option would be to leave the scores they were and redirect your Documents, photos etc to the bigger partition (I think that's what you were trying to do it before you tried to change the partitions) as described in the following link: http://windows.microsoft.com/en-US/windows7/Redirect-a-folder-to-a-new-location

• Partition question - what would be the best way to increase its space and take part of the space from another partition

  Hello, I have my 500 GB SATA broken down into 3 partitions. Vista and 2 others. The problem is the process of using Partition Magic, Vista has been given only 30 GB, now its operation with 1-2 GB of free space. I want to know what would be the best way to increase its space and take part of the space from another partition, but I don't want to have to reinstall or do I want to lose all the data like photos, browser, documents and news ect.

  -Thank you

   

  You can read more details on "How to move from one partition to the other sapce without loss of data.

• How to move rows from one partition to the other?

  We have a requirement for data retention for 6 months and after 6 months data can be withdrawn with the exception of a few documents to certain statutes (which cannot be deleted even if they are more than 6 months). We have Oracle 11g.
  
  I wanted to see if the following strategy works:
  
  I'll have monthly partitions and 8 sub partitions (hash) in each of the primary partitions. The secondary hash partitions are to spread the load of application data and balance the insertion of data in order to avoid any dispute.
  
  After 6 months, is it possible for me to spend with the line that must be kept in a different partition and drop the last partition. I wanted to avoid deleting data because we have that dead very shortly of database and delete data require us to coelize the database to avoid fragmentation.
  If I move the data to another partition, how do I do it?
  
  Thank you

  You guessed it! Exactly what I was trying to convey. That process will work the way you want.

• How can I add a new signature in a PDF file? I have one that is already there, but do not know how to add the other!

  I have adobe acrobat dc and I'm able to edit PDFs etc. in this program. How can I add a signature to be able to attach to the document?

  
  Thank you

  In 'Fill & Sign', there are only 2 registered entry. When you want to add a new one, than that you should remove one of the former.

• I have more than one partition on my hard drive, how to create a shortcut to a particular drive from the desktop?

  I fitted with a 1 TB drive to my macbook, then partitioned several times, all good so far, everything works.

  I use two connections, staff and work. My 'work' connection I have one partitioned drive named "work" which I use as an archive / storage for all work related data, far from any current activity. How to create a shortcut for just this partition to 'work' on the desktop?

  I tried Finder > Preferences > general - show these items on the desktop, hard drives of ticks. But it shows then all partitioned drives.

  The partitions must be included in the side bar of the Finder to choose. You can also click with the right button on a volume and select 'add to dock '. I don't know how to add an alias on the desktop.

• Add multiple nodes of the same name from one xml into another

  Hello

  Following my question the other day (adding several nodes of different one xmltype in the other), I now need a bit more complex that I can't work on where to begin, assuming that it is something that can reuse some/all the quote from yesterday (thank you once again, odie_63!). ETA: I'm on 11.2.0.3

  So, here's the (slightly modified) xml with the solution of yesterday:

  with sample_data as (select xmltype ("< root >

  < xmlnode >

  val1 < subnode1 > < / subnode1 >

  val2 < subnode2 > < / subnode2 >

  < / xmlnode >

  < xmlnode >

  val3 < subnode1 > < / subnode1 >

  < subnode2 > val4 < / subnode2 >

  < / xmlnode >

  < / root >') xml_to_update,.

  XmlType ("< a >

  < b > < /b > valb

  valc < c >/< c >

  < d >

  vald1 < d1 > < / d1 >

  < d2 > vald2 < / d2 >

  / < d: >

  Vale of < e > < /e >

  valf < f > < /f >

  < g >

  valg1 < g1 > < / g1 >

  valg2 < g2 > < / g2 >

  / < g >

  < h >

  valh1 < h1 > < / h1 >

  valh2 < h2 > < / h2 >

  < HR >

  < volume >

  < name > fred < / name >

  < type > book < / type >

  Head of <>1 < / head >

  < / multi-user >

  < volume >

  Bob < name > < / name >

  car of < type > < / type >

  < head > 0 < / head >

  < / multi-user >

  ( < /a >') xml_to_extract_from

  the double)

  Select xmlserialize (document

  XMLQUERY)

  ' copy $d: = $old

  Edit)

  Insert the node element extrainfo {}

  $ new/a/b

  , $ new/a.

  , $ new/e/f

  , $/ a/h new

  } as the first in $d / root

  )

  return $from

  by passing sd.xml_to_update as "old."

  , sd.xml_to_extract_from as 'new '.

  contents of return

  )

  dash

  )

  of sample_data sd;

  It gives me:

  < root >

  < InfosSuppl >

  < b > < /b > valb

  < d >

  vald1 < d1 > < / d1 >

  < d2 > vald2 < / d2 >

  / < d: >

  valf < f > < /f >

  < h >

  valh1 < h1 > < / h1 >

  valh2 < h2 > < / h2 >

  < HR >

  < / extrainfo >

  < xmlnode >

  val1 < subnode1 > < / subnode1 >

  val2 < subnode2 > < / subnode2 >

  < / xmlnode >

  < xmlnode >

  val3 < subnode1 > < / subnode1 >

  < subnode2 > val4 < / subnode2 >

  < / xmlnode >

  < / root >

  However, I now need to add new nodes according to the information provided by the < volume > something like nodes in a set:

  < root >

  < InfosSuppl >

  < b > < /b > valb

  < d >

  vald1 < d1 > < / d1 >

  < d2 > vald2 < / d2 >

  / < d: >

  valf < f > < /f >

  < h >

  valh1 < h1 > < / h1 >

  valh2 < h2 > < / h2 >

  < HR >

  < newnode >

  < name > fred < / name >

  < type > book < / type >

  < / newnode >

  < newnode >

  < name > bob < / name >

  car of < type > < / type >

  < / newnode >

  < / extrainfo >

  < xmlnode >

  val1 < subnode1 > < / subnode1 >

  val2 < subnode2 > < / subnode2 >

  < type > book < / type >

  < / xmlnode >

  < xmlnode >

  val3 < subnode1 > < / subnode1 >

  < subnode2 > val4 < / subnode2 >

  car of < type > < / type >

  < / xmlnode >

  < / root >

  If it's easier, I * think * we would be ok with something like:

  ...

  < newnode >

  < name type = 'fred' > book < / type >

  car < name type = 'bob' > < / type >

  < / newnode >

  ...

  Is the closest, I came:

  with sample_data as (select xmltype ("< root >

  < xmlnode >

  val1 < subnode1 > < / subnode1 >

  val2 < subnode2 > < / subnode2 >

  < / xmlnode >

  < xmlnode >

  val3 < subnode1 > < / subnode1 >

  < subnode2 > val4 < / subnode2 >

  < / xmlnode >

  (< / root > ') xml_to_update,.

  XmlType ("< a >

  < b > < /b > valb

  valc < c >/< c >

  < d >

  vald1 < d1 > < / d1 >

  < d2 > vald2 < / d2 >

  / < d: >

  Vale of < e > < /e >

  valf < f > < /f >

  < g >

  valg1 < g1 > < / g1 >

  valg2 < g2 > < / g2 >

  / < g >

  < h >

  valh1 < h1 > < / h1 >

  valh2 < h2 > < / h2 >

  < HR >

  < volume >

  < name > fred < / name >

  < type > book < / type >

  Head of <>1 < / head >

  < / multi-user >

  < volume >

  Bob < name > < / name >

  car of < type > < / type >

  < head > 0 < / head >

  < / multi-user >

  (< /a > ') xml_to_extract_from

  the double)

  Select xmlserialize (document

  XMLQUERY)

  ' copy $d: = $old

  Edit)

  Insert the node element extrainfo {}

  $ new/a/b

  , $ new/a.

  , $ new/e/f

  , $/ a/h new

  newnode}

  $ new/a/multi-user/name

  , $/ a/multi-user/new

  }

  } as the first in $d / root

  )

  return $from

  by passing sd.xml_to_update as "old."

  , sd.xml_to_extract_from as 'new '.

  contents of return

  )

  dash

  ) fred

  of sample_data sd;

  Which produces:

  ...

  < newnode >

  < name > fred < / name >

  Bob < name > < / name >

  < type > book < / type >

  car of < type > < / type >

  < / newnode >

  ...

  -obviously not right!

  Can anyone give advice? I tried to find similar examples, but I can't put it in the right search terms, or something!

  Hello

  To manage the expandable nodes, you have to iterate using a FLWOR expression:

  copy $d: = $old

  Edit)

  Insert the node element extrainfo {}

  $ new/a/b

  , $ new/a.

  , $ new/e/f

  , $/ a/h new

  , for $i in $ a/new/multi-user

  will return the newnode item {$i / name, $i / type}

  } as the first in $d / root

  )

  return $d

  or, even, to get the result by replacing:

  copy $d: = $old

  Edit)

  Insert the node element extrainfo {}

  $ new/a/b

  , $ new/a.

  , $ new/e/f

  , $/ a/h new

  newnode}

  for $i in $ a/new/multi-user

  Returns the element type {}

  name of the attribute {data($i/name)}

  data($i/type)

  }

  }

  } as the first in $d / root

  )

  return $d

• Reclaim the unallocated space - right of partitions

  I have two hard drives on my computer.  Recently upgraded to Windows 7 64-bit professional.  After data transfer, removal of previous operating system, I have unallocated space both disks located on the right side (as shown in disk management).  On the first disc, unallocated space is to the right of the only partition on the disk - the main partition.  On the second drive, unallocated space is to the right of a pair of partitions - the primary partition and logical partition.

  First, I want to add to the main partition unallocated space.

  On the second, I add 1/2 on the unallocated space on the main partition, the other 1/2 to the logical partition.

  Disk management does not partition to the left.  So, how can I add disk space unallocated right at existing partitions (on the left).

  Appreciate any help.

  Thanks Palcouk!

  Took time for me to get there (my computer was not dead in the water, in order to recover the unallocated portions of the disk was not urgent)... but I used the program you suggested.  It was working fine.

  1/3 of my disc of Microsoft disk management could not recover (which was empty unallocated space) is now part of my OS partition (C :) and the partition I created for programs (p).  (All data from there, files are on a second drive - for many years now, I've kept my data on a 2nd drive w the OS on the 1st disk).

• How to add a space between the pages of Indesign CC spread

  Hello

  I'm looking for an answer to add a space between pages to spread, but I have found none, not DC at least. Can someone help me please?

  In the attached picture is the exported PDF, you can see that the two pages are similar to one.

  

  Thanks for your help!

  Julius

  If all you want is to see a gap of page when you view a PDF file in Acrobat, export to PDF from InDesign mayonnaise. When the single page PDF is ready, open it in Acrobat and go to view > Page Display and implement two continuous. For the first page on its own, select view > Page Display > Show Cover Page during two places.

• New FF 32.0.2 break from one day to the next. Full disclosure - Cookie Clicker

  I use FF for many things, often many tabs, etc. I picked up clicker cookie a month or two ago. I always left CC running from one day to the next day without any problem until FF update to version 32.0.2 and now I'm back in the morning to find that it is broken down.

  More recent reports of incidents:

  BP-977c17bd-f1fe-4A8A-98e3-773682140919 19/09/14 07:21
  BP-256c08cf-0725-4200-bA1a-fe2b62140918 18/09/14 07:55

  I use very little add on, same theme, that I had for many years, nothing has changed other than the version of FF I know.

  Any help is appreciated!

  Full Disclaimer: Yes, I know that the perils of the performance of my computer all night. Since I always did before upgrading the version of FF, I fear that this time with which these accidents started after this upgrade. Thank you!!!

  Next steps that I took:

  1 recorded progress, tab reloaded.
  2. right click on the page and go to "display information page.
  2.a. Under support, scrolls to find ads (usually flash .swf) and blocked images from these sites.
  2.b. 1 - 2A to repeat several times
  2.c. According to the news page-> permissions, blocked Adobe Flash for just this site.

  The performance so far is upward. We'll see how he holds up the night.

• With a binding high-speed small (1.3 MB) and living in a multi storage House, is it a lot to win add a device from the airport to the BT router?

  We have a high link flow modest (1 to 3 Mbit/s) and a several-storey house.

  My iMac will work faster Safari if I add a device from the airport to the BT router?

  My iMac will work faster Safari if I add a device from the airport to the BT router?

  No, because the speed of your Internet connection is controlled by your provider, BT, if you need a faster Internet connection, you will need to talk to BT one faster... and more expensive... plan connection.

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Once I reset my battery CMOS from one day to the next. I tried to install my recovery disk this morning and can't get it done

  Once I reset my battery CMOS from one day to the next.  I tried to install my recovery disk this morning and can't get it done.  I kept receiving an error of 100.
  Don't know what to do.
  Are there out there can HELP?

  Please, I beg you!

  Thank you

  Hello

  Would you please ask the same questions more then once in these Forums.

  What you're doing is confusing in these Forums, as nobody else knows what advice are envisaged for you in other responses.

  Other questions, it seems you have an HP computer.

  Here is the information of HP for Vista from recovery to factory settings:

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.
  

  NOTE: perform the recovery process by using the custom recovery disk you created can take less than an hour, whilst using the replacement disks ordered directly from HP can take four to six hours and includes several reboots.
  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.
  Use the recovery discs to restore the PC by following the steps below.
  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. etc.

  If you are having problems using the HP recovery process, you will need to contact HP, because this is Recovery process HP, not Microsoft.

  Details of HP:

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  You can also try the Forums from the HP Support:

  http://h30434.www3.HP.com/

  See you soon.

• Hard drive inexplicably doubled from one day to the next

  My hard drive inexplicably doubled from one day to the next.  I now have only 3 GB free.  I did disk cleaning, defrags, uninstalls, deleted files (just 23 GB of personal files, music, etc. 99 GB drive), etc.  I downloaded TreeSize and see what the size of my files are, but don't know what is normal.  Common sense tells me that clearly something has changed the last time I used my computer to create this problem, but the only change I made was moving my personal files in my user folder to a Public folder, and then in my computer with my other laptop's network.  I checked three times, and my previous user folder files have definitely missing.  Could a bunch of file system are duplicated or something like that?  I know that I cannot delete them, but is it possible to clean them safely?

  To clean all the files on the computer

  1. Click to open Disk Cleanup.

  2. In the drives list, click the drive you want to clean, and then click OK.

  3. In the Disk Cleanup dialog box, click on clean up system files. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. In the disk cleanup: drive selection dialog box, select the drive you want to clean, and then click OK.

  5. In the dialog box disk cleanup, on the Disk Cleanup tab, select the check boxes for the types of files that you want to remove, and then click OK.

  6. In the message that appears, click on delete files.

     The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:

     • Programs and features. This option opens programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.

     • System Restore and shadow copies. With this option, you can remove all but the most recent point on the restore disc.

       Use system restore to return your system files to an earlier point in time, restore points. If your computer is running normally, you can save disk space by removing the previous restore points.

       In some editions of Windows 7, restore points can include previous versions of files, called the shots and backup images created with Windows complete PC Backup. These files and images will also be deleted. For more information about system restore, see what is system restore?