M55-S325: System Configuatuion to the launch of the system utility

Similar Questions

• M55-S325: how to format the laptop?

  How can I reformat my laptop which is a M55-S325, and what I have to do this.

  Hello David

  The question is what you want to install on your laptop?
  Image recovery or maybe Microsoft Windows XP edition full home version?

  If you use the recovery that will be formatted the HARD drive before Setup starts and with the installation of Microsoft there is an option that format any partition or HARD drive.

  Good bye

• Satellite M55-S325 - error when starting of the OS and reinstall

  OK, so I got the Satellite M55-S325 for awhile.
  But after a while, he started to read errors when trying to log on to my normal account, so it me logged on temporary.
  After you perform a system restore and go back to my old account, I backed up my work just in case it happened again - and he did.

  This process is repeated several times until the laptop has reached the point where it starts... the windows splash screen appears, but after it is loaded, it will restart and go to the crash of the screen where I have the option "Start windows normally", when I press this option, he repeats the entire process of restarting after the splash screen.

  I tried to reinstall the operating system, and it worked once. It has been fully functional for a few days after I installed the necessary drivers. But then it happened again (the repetitive cycle of rebooting). Now it wont let me re - install the OS... it keeps reading error disc as soon as I clicked the quick format NTFS option.

  Someone has an idea of what's going on?
  What is the motherboard, or a damaged drive? Maybe something wrong with the BIOS? I have to get a new HARD drive if it's associated drive?

  Any help would be appreciated, thanks.

  Hello

  > Now it wont let me re - install the OS... it keeps reading error disc as soon as I clicked the quick format NTFS option.
  I think that this could happen due to HARD drive failure if you get an error during reading of data from the HARD drive then the first device that should e tested is the HARD drive.

  If you n t want to buy a new disk only to run tests, then you could contact the mobile technician who could check the HARD disk and could eventually replace them.

  Welcome them

• Satellite M55-S325 DVD write error (MAT * a DVD - RAM UJ-years 840)

  Hi all
  I have a Satellite M55-S325 with MAT * A DVD - RAM UJ-years 840 Firmware Version 1.52 I bought States 5 months ago, everything seemed fine until a few weeks ago when I tried to write some data DVD, I had unrecoverable errors while writing the DVD using NERO 7 ULTRA EDITION, but now I get this messege all the time and I'm not able to write any DVD the disc seems to be well in CD writing. I tried to use recording SOUND now that comes with the laptop, no luck. I tried to reduce the size of the files, and try with lower write speeds but still no luck. I disabled burning CD of the Windows XP SP2 IMAPI burning service COM as well. I use a good quality DVD-R that worked fine before. I would appreciate your help because my HDD is almost full (but still 10 GB of free space) and I need to get a backup of my data.
  Here is the log of my last attempt in writing, file a NERO DVD:

  1C82-0010-8011-0000-1454-2737-5268

  Windows XP 5.1
  IA32
  WinAspi: -.
  Ahead WinASPI: file 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver = 2.0.1.74, size = 164112 bytes, created 02/11/2004 13:54:32

  NT-SPTI used
  Nero Version: 7.0.1.2
  Internal Version: 7, 0, 1, 2

  Recorder: Version: 1.52 - HA 1 YOUR 0 - 7.0.1.2
  Adapter driver: HA 1
  Drive buffer: 2048kB
  Bus type: default (0)-> ATAPI, detected:?
  CD-ROM: Version: 1.52 - HA 1 YOUR 0 - 7.0.1.2
  Adapter driver: HA 1

  = Scsi-device-map =.
  DiskPeripheral: TOSHIBA MK1032GAX atapi Port 0 ID 0 DMA: on
  CdRomPeripheral: MAST * A DVD - RAM UJ-years 840 atapi Port 1 ID 0 DMA: on

  = CDRom-Device-map =.
  CARPET * a DVD - RAM UJ-years 840 D: CDRom0
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 73400320 (0) bytes
  ShowDrvBufStat: 1
  BUFE: 0
  Physical memory: 502 MB (514480 KB)
  Free physical memory: 160MO (164772kB)
  Memory in use: 67%
  QUERIES PFiles: 0x0
  Use consultation: 1
  Global Bus type: default (0)
  Control supported media: disabled (0)

  14.5.2006
  Compilation ISO
  15:18:55 #1 text 0 file Isodoc.cpp, line 6411
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: FALSE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: REAL
  Multisession: FALSE
  Burning mode: DAO
  Mode : 1
  : ISO 2 (31 characters)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  15:18:55 #2 Text 0 File ThreadedTransfer.cpp, Line 525
  ReadBuffer-Pipe got 262144KB of memory

  15:18:55 #3 text 0 file Reader.cpp, line 124
  Player running

  15:18:55 #4 text 0 file Writer.cpp, line 113
  Writer D: MAST * A DVD - RAM UJ-race years 840

  15:18:55 ISO9660GEN #5-11 file Geniso.cpp, line 3312
  First address writeable = 0 (0x00000000)

  15:18:56 #6 text 0 file Burncd.cpp, line 3302
  Turn on Disc-At-Once, using DVD media

  15:18:56 #7 Text 0 File DlgWaitCD.cpp, line 279
  Last possible write address on media: 2295103 (510:01.28, 4482 MB)
  Last address to be written: 2288159 (508:28.59, 4469 MB)

  15:18:56 #8 Text 0 File DlgWaitCD.cpp, line 291
  Write in overburning mode: No. (enabled: CD)

  15:18:56 #9 Text 0 File DlgWaitCD.cpp, line 2578
  Recorder: MAT * a DVD - RAM UJ-years 840, media type: DVD + R
  Disc manufacturer ID: MBIPG101, media Type of ID: R04, product revision number: 1
  Disc Application code: 0, extended information indicators: 3

  15:18:56 #10 Text 0 File DlgWaitCD.cpp, line 458
  > Protocol of DlgWaitCD activities:
  =========================================

  15:18:56 #11 text 0 file ThreadedTransferInterface.cpp, line 847
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 2288160 (2288160) original disc POS = #2288160 / 508:28.60
  relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288160 blocks [D: MAST * a DVD - RAM UJ-years 840]
  --------------------------------------------------------------

  15:18:56 #12 text 0 file ThreadedTransferInterface.cpp, line 1059
  Prepare recorder [D: MAST * a DVD - RAM UJ-years 840] for write in CUE-sheet-DAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Session closed, fixed disk
  Tracks 1 to 1:
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 0 4686151680, ISRC ""
  Introduction DAO:
  ===========
  __Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | _RecDep___ _
  0 | Lead-in | 0 | 0x41. 0x00
  0 | 1. 0 | 0x41. 0x00
  0 | 1. 1. 0x41. 0x00
  2288160 | Lead-out | 1. 0x41. 0x00

  15:18:56 #13 text 0 file SCSIPassThrough.cpp, line 36
  SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

  15:18:56 #14 phase 24 file dlgbrnst.cpp, line 1725
  Caching of files started

  15:18:56 #15 text 0 file Burncd.cpp, line 4132
  Cache writing successful.

  15:18:56 #16 phase 25 file dlgbrnst.cpp, line 1725
  Caching of files completed

  15:18:56 #17 phase 36 file dlgbrnst.cpp, line 1725
  Burn process started at 8 x (11 080 KB/s)

  15:18:56 #18 text 0 file ThreadedTransferInterface.cpp, line 2685
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  15:18:56 #19 text 0 file Cdrdrv.cpp, line 8411
  -A DVD structure: physical Format information (00 h).
  Layer: 0, address: 0 (0 h), AGID: 0; Length: 2050
  Book type: DVD + R (10), part Version: 1.0 x (1)
  Disc size: 120 mm, maximum speed: (h F)
  Number of layers: 1, track path: path of the parallel runway (PTP), layer Type: recordable
  Linear mass: 0,267 um/bit, track density: 0.74 um/track
  Starting the number of physical sector of data area: 30000 h (DVD-ROM, DVD-R /-RW, DVD + R / + RW)
  End number of physical sector of data area: 26053F h
  End sector number in layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
  There is no data in Burst cutting area (BCA)
  Disc Application code: 0 / 0 h
  Scope of Information indicators: 3 h
  Disc manufacturer ID: MBIPG101
  Media type ID: R04
  Product revision number: 1
  Number of bytes to use physical format information in ADIP up to byte 63:56
  Particular media [16.63]:
  00 00 03 4 42 49 50 47 - 31 30 31 52 30 34 01 38... MBIPG101R04.8
  23 54 37 12 02 42 6 02 - A8 6 B 15 15 0 B 0 B 08 08 #T7. BN... k...
  01-19-1 B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00...

  15:18:56 #20 text 0 file DVDPlusRW.cpp, line 666
  Begin to write his address to the LBA 0
  Mode high compatibility DVD: Yes

  15:20:47 #21 SPTI-1128 file SCSIPassThrough.cpp, line 323
  D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1128)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Printing Code: 0x11
  Meaning of Qual: 0x00
  The CDB data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
  Sense area: 0xF1 00 03 00 00 00 00 0 a 00 00 00 00 11
  Buffer x05e50000: Len x 10000
  0 X 40 86 AB A0 6 B 93 01 4F 75 2 A 54 25 B7 F6 D3 E5
  0XA9 FC 97 DF 55 73 64 2 AA AF 96 7 D B8 4 C 7 C 66
  0XC1 9TH C1 FF FF 55 59 DB 08 65 CB 6 CA B9 0C HAS 2 B

  15:20:47 am #22 RDC-1128 file Writer.cpp, line 302
  Unrecoverable read error
  D: MAST * A DVD - RAM UJ-YEARS 840

  15:20:47 #23 text 0 file ThreadedTransfer.cpp, line 228
  all writers idle, stopping conversion

  15:20:54 #24 text 0 file ThreadedTransfer.cpp, line 222
  conversion idle, stopping reader

  15:20:57 #25 SPTI-1106 file SCSIPassThrough.cpp, line 323
  D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1106)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  The CDB data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
  Sense area: 0 x 70 00 03 00 00 00 00 0 to 00 00 00 00 73 03

  15:20:57 #26 SPTI-1106 file SCSIPassThrough.cpp, line 323
  D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1106)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  The CDB data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
  Sense area: 0 x 70 00 03 00 00 00 00 0 to 00 00 00 00 73 03

  15:20:57 #27 phase 127 file dlgbrnst.cpp, line 1725
  Generating borders high compatibility DVD

  15:20:57 #28 phase 129 file dlgbrnst.cpp, line 1725
  Production DVD borders completed successfully

  15:20:57 #29 phase 38 file dlgbrnst.cpp, line 1725
  Burn process failed at 8 x (11 080 KB/s)

  Existing drivers:
  File ' Drivers\CDRALW2K. SYS: Ver = 6.2.0.132, size = 24698 bytes, created 23/10/2003 04:15:02
  File ' Drivers\PXHELP20. SYS: Ver = 2.03.28a, size = 20640 bytes, created 05/31/2005 23:36:01 (Prassi/Veritas driver for win 2 K)

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

  Hello

  I can't find any strange or mysterious messages in the log file.
  You suggested that the drive can burn CDs but not DVDs.
  The calibration lens dysfunction is sometimes responsible for these issues.
  Unfortunately, I have no solution for this problem. The replacement drive must resolve.
  The unit is fairly new in this case, you should ask for help ASP.

• M55-S325: performance declined

  my computer has been trolling. Why?
  I have a m55-s325 with norton antivirus 2006. I can't remove a printer all-in-one officejet 500 from my computer eather.

  Hello

  In my opinion, the simplest answer is: because of you. Who knows what you do with your unit and what kind of things is installed there. One of my friends had a similar problem and after removing many applications unnecessary and hidden, it worked well again.

  I noticed that very often this portable performance decreases due to the antivirus program. If you can not do better after cleaning I recommend to backup your data and preinstall the device with the recovery media. After that the unit will be Clean preinstalled and it will work like on the first day.

  Good bye

• How to disable the auto launch in canon EOS utility on my mac?

  Can someone let me know if you can disable this automatic launch. I'd like to use capture one, utliity eos on my computer as a backup plan. With the eos utility auto launches it will not capture to mount the camera. I tested it on my tour where I have the utility and capture works perfectly. So I think this is the device of auto-launch or it could just be that eos is installed and which has precedence.

  I use the eos utility 2 - 2.14.20.2 with a mark II

  My os is Yosemite 10.10.5

  Thanks in advance for any help

  See you soon,.

  Brad

  In the Canon utilities in the Applications folder, there will be an EOS Utility folder. In this case would be an EOS Utility application and EOS Utility 3 folder. If you run the application it gives you the icon on the menu bar.

  

  

• In Windows XP, the BACKUP utility in system tools requires a floppy disk should be created when you back up an entire volume. Why should a disk be used?

  As floppy drive are no longer included in laptops, the use of a USB storage device would make more sense now? Is this possible?

  Richard1952,

  Yes, you should be able to select an area on which you want to record on.

  Start > all programs > Accessories > system tools > backup: make sure to follow the installation instructions USB is plugged on when you start the backup utility.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• Get a Boot Manager error the amount of system memory has changed strike F1 to continue (I have F1 race) or F2 to run the Setup utility

  OT: Sign in

  I got this alert several times before the alert "windows boot manager".

  The amount of system memory has changed (I have more or less?)

  Strike F1 to continue (I have F1 race) or F2 to run the Setup utility

  Dell Dimension 3000 system series

  What should I do? Run the configuration utility

  anconcito

  Irfan:

  1 - no

  2 - Yes

  today after trying 'the memory diagnostic tool' I had the same alert, I clicked on F2, but I did nothing I do not know how

  3 - no

  Hello nacienancon,

  1. don't you make changes to the computer before getting this error?

  2 are you able to boot normally to the desktop when you turn on computer?

  3. have you tried to install any device memory on your computer?

  This problem is related to hardware, I suggest that you contact Dell support to help you better. You can check the links with information below:

  http://support.Dell.com/support/eDOCS/systems/opgx620/en/UG/A02/memory00.htm

  http://support.Dell.com/support/eDOCS/systems/opgx620/en/UG/A02/tools00.htm#wp1114195

  You can follow the technical assistance column for more information.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• W530 UltraNav Driver installed - where is the UltraNav utility?

  I am at a loss as to where the options are to tweak the UltraNav pointer and the touchpad on my Win7 64 bit W530. I did a fresh install of Win7 on it and downloaded all the drivers (more to run the system update utility) and while the UltraNav Driver is correctly installed and working, I do not see any place to download the UltraNav UTILITY.

  

  It's my ThinkPad fifth or sixth, and one of my favorite things is the UltraNav pointing combined with the touchpad. I would like to change the effort required on the pointing device, and then use the touchpad for idling and forced to control knobs. These settings have always been accessible on a tab on the control panel of the mouse after installing the UltraNav utility.

  I thought that maybe the UltraNav Driver included the utility, but I can't find any way to access the old controls that I'm so used to having on pointing devices.

  

  Any ideas what I may be missing? My Lenovo service ticket has been opened for two weeks now with no response, so I thought I would try my luck here.

  Thank you!!

  Well, it seems that a launch utility that I used to open quickly the mouse control panel, it opens in a way that does not include the installed extensions!

  If I just open the control panel of the mouse on the screen control panels, it is suddenly here!

  Thanks for your quick response, ColonelONeill! I think that your answer made me look just a little more close, that was all that I need. :-)

• Brand new Aspire E11 (E3-111) brick by the BIOS utility official Acer - what now?

  Yesterday, I bought a new netbook for my girlfriend. I decided to make sure that the netbook is using the latest BIOS and latest drivers. So I downloaded the BIOS utility official support page (http://www.acer.cz/ac/en/US/content/drivers/5329;-;) Aspire 20E3-111%), extract BIOS_Acer_1.05_A_A.zip and launched BIOS_Acer_1.05_Windows\ZHJ_105.exe.

  The utility began to update the bios without asking (!), the system has been rebooted and I also saw a progressbar finishing 100%. Then I waited... nothing (battery was full and connected to the AC). Now, the netbook is dead. Power button does nothing.

  Is there something I can do before I go back?

  My broken netbook has been replaced by a new. You can be sure that I won't try updating the BIOS again ;-).

• How can I just disable logging in El Capitan? It is not visible in the disk utility by pressing alt and file!

  How can I just disable logging in El Capitan? It is not visible in the disk utility when you press alt and file!

  

  Mac OS X: about the logging of system - Apple Support files

  Hope this helps, good luck to you.

• Satellite S50-B-12Z: battery life cycle Option does not appear in the eco utility

  Hello everyone.

  I am facing a strange problem. The eco utility allows to work ok with win 10 on my S50-B-12Z satellite and I used the eco charging battery I've run mainly my laptop plugged in.

  At some point, I need to do a system restore. I have re-installed the 10 victory and also the latest version of the eco utility downloaded from the Toshiba site. The problem is that when I open the utility eco, the choice of "battery life cycle", where you can select the eco reload or not, seems no more! So I find myself with the battery to 80% connected but does not support.

  I already tried to uninstall and reinstall the utility or install an earlier version of it.

  Is there something I could do in order the choice of "battery life cycle" to reappear or to cancel the State of charge of eco and leave my battery to charge again 100%?

  Thank you

  I have the same problem with my P50 - A satellite. Battery-life cycle does not appear in the new eco Win 10 utility installed. Version is: 3.0.0.0006. Older versions do not work, I tried also.

  More than 80% of maximum load, not 100% .

  I hope someone has a suggestion. To 80% battery life is too short

• Old SSD model recognized by the SSD utility?

  Are you intend to include older models, like TOSHIBA THNSNS12, be recognized by the SSD utility?

  My model:
  PC Upgrade Kit - HDTS112EZSWA with THNSNS120GBSP 120 GB SSD

  I think this good place to isn t for this question since it is a community of users.
  But just out of curiosity: What utility do you mean exactly?

  I have not found utility SSD but only the Toshiba HDD/SSD Alert Utility which is usually pre-installed on Toshiba laptops. The TOSHIBA HDD/SSD Alert includes Assistant functions to monitor the disk status on and perform the backup of the system.
  The alert function must function SMART failure to predict which monitors the drive in operating condition. If in case the SSD or HARD disk drive supports SMART failure to predict function, the utility should be able to read

• Some gaps in the understanding of the Bluetooth utility

  The system used is
  -Chip Bluetooth of CSR, BT 2.0 between BDUS operating with a Toshiba BT stack, all on ASUS laptop
  -Nokia mobile phone, no smartphone with features of BT

  More Bluetooth Toshiba utility includes among others
  Exchanger casablenca Bluetooth
  Wireless file transfer
  According to the Bluetooth utility user guide both of these seem to use
  BT services/profiles
  FTP and OPP, BIP
  I can run and use these two components without any problems with my Nokia phone.
  In fact, in regards to the component of its 'file transfer' function only wireless file transfer works.
  "It is not possible to run here"Image transfer"and" transfer of the objects '. "
  So this Nokia don't seem to support the OPP and BEEP.

  However, if you want to connect to my mobile Nokia phone in custom Mode the
  reports to the BT Utility suite services/device profiles
  -dial-up networking
  -Network access point
  -serial interface, Nokia PC Suite
  -serial COM1

  Why the profile service FTP is not on this list?
  "The network access point" official BT profile this point corresponds to?
  Perhaps to LAN Zugang zum profile LAP? If so, why BT utility does not use the official
  the name of this service profile?

  Many mobile phones support OPP or FTP.
  Smartphones often agree also to BEEP.
  Right click on your phone icon in the 'interchange of Information Bluetooth"
  and select "Service Discovery". Now you should get a response to
  your question if this function is supported.

  Why the profile service FTP is not on this list?
  -------------------------------------------------------------------------------
  -FTP does not any installation. There is no need to show this in the Setup Wizard.
  However a link to the wireless file transfer tool will be displayed if the device does not have any other Bluetooth service profiles to offer.

  "The network access point" official BT profile this point corresponds to?
  Perhaps to LAN Zugang zum profile LAP? If so, why BT utility does not use the official
  the name of this service profile?
  ------------------------------------------------------------------------------
  -Please note that there is a difference between:
  Access LAN, PAN user profile profile profile of generic network PAN and PAN profile of network access point
  So to answer your question: "Network Access Point" refers to a PAN network access point profile

• Satellite Z830 - cannot install the Eco utility because of the wrong version of the OS

  I installed Windows 8 from the original CD (not an update) and installed many pilots. When I try to install the Eco utility, it goes all the way to the end but then tell me that the operating system is not supported with load (translated) and cancel the installation.

  What can I do?

  Concerning
  Benny

  NB: Satellite Z830 and this is the version Win8 Eco Util (eco-20121126101818)

  Can you please post exact model laptop (Z830-xxx)?
  I just want to check if Win8 drivers are available for your laptop satellite.

  http://EU.computers.Toshiba-Europe.com/innovation/windows8_drivers.jsp