added a new router

Similar Questions

• Adding a new wireless router from Linksys at an old Linksys router system

  Hello

  I'll install a new standalone DVR to a home video surveillance system.  I would like to be able to access it with my current PC so I would like to add a Linksys wireless router.

  I'm currently 1 Linksys Wireless - G Broadband Router with speed Booster model WRT54GS-BP and 2 models WMP54GS from PC that have PCI adapters Wireless-G with speed Boosters (802.11 g).  I had these installed since 2006 and although they are no longer supported I really want to have to upgrade because they work very well.

  My questions are:

  If I add a new Linksys router to my new DVR will be able to communicate with my older Linksys router and adapters?   If Yes, what would be the best new router Linksys type should I buy?

  Thanks in advance for any help and advice.

  Hi Dan,.

  Please excuse the delay of time here, but I had a hard time to post a reply.  I added Ethernet Wireless-N - WET610N bridge.  When I installed the software, I kept getting error 102 - an error occurred communicating with your device.  I called Linksys for help and the tech had me make a few changes to the router 192.168.1.1.  I was able to install the Web Service to display the camera on both of our PC.  So the addition of the WET610N allowed us to access the DVR wireless!

  Thanks a lot for all your help!

• 305 a HP desktop printer: J611 Wireless Desktop HP 305 a series will not connect to new router to talktalk (using Chromebook)

  A new router through Talktalk and since then my printer Wireless does not connect.  It shows on my chromebook as this has already been added as a printer of cloud, but blue light wireless flashes.  Not had any problems before this that he was that we got the new router.  Tired to connect by using the method of the button/PIN button still no joy.

  Please note using Toshiba chromebook on windows/mac.

  Please help as I am ready to scream! Laughing out loud

  Longess

  Hello @longess,

  Welcome to the HP support forums.

  I understand that you have acquired a new router and get your Deskjet 3050 has connected to your new network.

  I would like to help.

  The blue light is flashing on the printer indicates that the wireless radio is on, but the printer is not connected to a network. This is the situation. You have a new router. The printer must be on the network.

  So the next step is to get the printer on the network.

  The deskjet printers family is usually USB wireless setup.

  This causes an obstacle when you use only a Chromebook.

  Chromebook does not support the software needed to turn the printer on the network.

  If you have access to a Windows or Macbook notebook, the following link will help you place the printer on the network.

  Configure the printer to a wireless network for the HP Deskjet 3050 a and 3070 e-all-in-one printer series

  I have something you can try.

  Check out this post from Sunshyn2005.

  Re: Deskjet 3050 does not connect to my wifi network

  If this message does not help to get on the new network printer, you will need to borrow a Mac or Windows computer.

  Good luck

• I have a new router and the printer does not work. I have the hp photosmart c4795 all-in-one.

  What should I do to get the router to recognize the new router

  It's working now. I deleted my printer, downloaded the software from HP and added the new printer. Followed the instructions and it is running. Thank you

• Adding a Second router to my LAN

  I have 4 devices on my network-

  1 surfboard cable modem

  2. router WRT160N wireless - 192.168.1.1

  3 Linksys 10 / 100 5 port switch wired

  4 WRT160Nv3 - 192.168.1.2

  My current setup is-

  1. first router modem. (WAN PORT)

  2 port LAN router for UPLINK port on switch

  The switch is located on the first floor, the router is down.  The router's wifi fails on the floor, so I bought another WRT160Nv3

  How can I add this to my installation?  I tried hanging the new router direct to a PC and configure it so that it is NOT a DHCP server and last slot the IP 192.168.1.1 to 192.168.1.2 and then sign a LAN switch port in a new router LAN port and the pc the new router cable.

  In the above configuration, NOTHING after the switch works.  I can't internet while the switch is wired to the router second on any computer of attatched to the switch.  Internet wifi won't get (from second router)

  Any help would be greatly appreciated.  I'm not trying to make a repeat using the same SSID, just try adding an access point on my current setup.

  Everything worked fine with 1 Router DHCP and then switch to the floor, but no wifi up there.

  I made myself, solved by removing the switch from the configuration.  I'm sure that I could add it back in after the 2nd router, but for some reason, it wouldn't work with her inbetween the two routers.

• bought a new router a moment internet is super slow.what I can do to get back to normal

  Use att. bought a new router net and now internet is super slow.  It seems that if I'm streaming that it takes forever to get a display full screen

  Hello

  What is the brand and model of the router?
  Method 1:
  See the link, follow the steps and check if it helps to solve the problem.
  
  Why is my Internet connection so slow?
  http://Windows.Microsoft.com/en-us/Windows-Vista/why-is-my-Internet-connection-so-slow
  Method 2:
  You can check out the link and check if the router is correctly installed on the computer.
  
  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx
   
  Method 3:
  Check out the link and follow the steps.
   
  Internet Explorer is slow? 5 things to try

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

   

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• HP L7680 - display offline with new router Xfinity

  We recently changed to a gateway router Xfinity and our Officejet L7680 is connected via an ethernet cable to the new router.  However, the printer is showing offline on computers that are connected to the wireless network.

  The Xfinity settings gateway shows the printer as a device connected when I connect and the printer settings (accessible via IP address) show that it is online.  But when I try to print something it says the printer is offline.

  We use macs (1 x MacBook Pro running 10.9 and 1 x Pro Mac running 10.6).  Both have the same problem.

  I tried all power and turn it back on.

  I tried to delete the printer installed on the Mac and again add a new printer, but is no longer appears in the list.  I tried adding them as an IP address, but the printer does not print correctly (spit the code).

  Any ideas - it drives me crazy?

  Thank you

  Thanks for your help, Cheetah12.

  I finally found the solution!

  The PC connected via a cable ethernet print very well, like the Windows laptop connected via Wi - Fi, so I thought it was a problem with the fact that I was using Mac.

  I uninstalled the printer and then reinstalled driver as the use of PPIS and the IP address of the printer.

  So far, it seems to work!

  Thanks again.

• 3050 printer all-in-one - connects to the new router?

  Hello

  I just got a new router installed and since can't get my Deskjet 3050 to a wireless connection.

  I tried to go into the router setting and adding via pin and WPS button but no work

  I tried the part configuration of the HP set up in my Mac, but only crashed every time so I uninstalled the printer and re downloaded. However he now does not have as an Application, but I can still select in sub printers, but can only print via cable Wi - Fi and not

  Help - very frustrated

  Thank you

  It's weird.  Try disconnecting the power to the printer without turning off first.  Unplug the unit from the rear of the printer and omit the cable for 30 seconds.

• My MacBook Pro was built in mid-2009, I understand that I won't be able to get the next Sierra of OS.  I just put a new hard drive 700 GB, more I added a new battery to include a new CD/DVD drive.  I spent more than 400 million dollars. What I need to by

  My MacBook Pro was built in mid-2009, a 2.6 GHz, 13-inch, I just put a new hard drive 700 GB and I added a new battery to include a new CD/DVD drive.  I spent more than 400 million dollars.

  I understand that I won't be able to get the next Sierra of OS. I need to by a new Mac?

  Talk to the people the more I would get if I turn in I'd get is about are about $ 100 million.  Please tell me it isn't so.

  If you want Siera you will need a new Mac, but you can continue to use the old one as long as you want.

• Added the new computer but lost all favorite settings on old. I need new account keep different settings on both?

  My laptop (i5, running Win 7) is my workhorse computer that had all my favorite settings stored. I added a new office (AMD, Win 8.1) that will be used as a multimedia entertainment unit, but when I connected the cable to install FireFox it replaced all the settings in my laptop with the new computer. How can I keep the different settings on each computer? Must have 2 different accounts to be able to do this? I have now lost the web address for some of my sites, so it's quite painful. The "recently marked with a bookmark" folder is the main problem, because it is where I was monitoring my sites.
  Computer LAPTOP is Acer Aspire i5 & Win 7 runs the modules listed below.
  DESKTOP is a Medion with an AMD 3.8 GHz Turbo & Win 8.1, with the new version of the FF browser.
  Auto Firefox installed the same modules as the laptop, but I will change those & don't want to FF to automatically install the same on both computers. How can I separate them?

  See this - https://support.mozilla.org/en-US/kb/how-do-i-choose-what-types-information-sync-firefox

  You can only select favorite and maybe passwordsand uncheck other options of data type.

• AirPlay does not work on new router

  Hello world

  I read so many topics here on airplay, but I am absolutely tired of trying everything without any results at all. So I hope that someone will know the answer.

  So. My amp is connected via an eithernet cable to a router. Amplifier a airplay in there and able to play the music of apple devices. I used to play music from my iPhone. My router is a generic router from BT, I think that the 3rd generation. This Setup has worked well without any adjustment, straight out of the box,

  Recently, I switched to another internet provider - Relish, is a London based provider internet 4G. Their router is manufactured by Gemtek. The configuration of the router is the same as BT (at least to the extent that I noticed) however my Airplay has stopped working.

  • I tried all the shamanic standard moves, like any change and turn on etc.
  • I also tried to rewire everything back to BT router and it worked. So it's certainly something in the router, but I don't understand that. Also.
  • The amplifier has a mobile application for use as a remote control. The application connects to the amplifier by the same router OK, can I turn on or off etc. If the connection is OK.

  I look forward to your suggestions!

  Many thanks in advance,

  Alex

  Here are the ports that airplay depends on... (search for airtime in the list)

  TCP and UDP ports used by Apple software - Support Apple products

  He'd have (pardon the pun) that your new router can have these locked in its default configuration.

• I added a new apple ID. He continues to show former apple ID what me I forgot the password.  What should I do?

  I added a new apple ID. He continues to show former apple ID what me I forgot the password.  What should I do?

  Bought/downloaded content by one that Apple ID is linked forever, and in the case of applications will always require to update.

  Your best bet is to try to recover the password for it.  Go to http://iforgot.apple.com and try to get it back.

  If you forgot your Apple ID - Apple Support password

• I want to connect to my existing to a new router Airport extreme

  I want to connect my extreme from the airport in a new router upgraded.  What should I do?

  Consult this manual.

  https://manuals.info.Apple.com/manuals/1000/MA1644/en_US/airport_extreme_80211ac _setup.pdf

• I recently added a wireless router and now can't access the internet through Firefox.

  When I laucnch Firefox, I get the following message: Firefox has detected that the server redirects the request for this address in a way that will never end.

   This problem can sometimes be caused by disabling or refusing to accept
     cookies.
  

  What I have to do something else now that I added the wireless router?

  From a previous post:

  Clear Cookies for the specific Site or Page, you encounter the problem of connection to- or if no site is loading, clear all Cookies: http://support.mozilla.com/en-US/kb/Deleting%20cookies?s=clear+cookies & r = 1 & as = s

• P1102w printer: have new router and can not figure out how to print wireless at P1102w printer - he sees old router

  I installed a new router (Netgear R6220) and cannot figure out how to get the P1102w printer to recognize the new router. It shows the former name of the router (Belkin.833) on the test page and displays the IP address configured by AutoIP rather than DHCP as the old router does. The computer is a desktop Dell Dimenstion about 3 years and use Windows 7. The router connects to the computer to the Internet.

  Help - How to make the printer recognize and communicate with the new router? (The original installation instructions don't seem to work for me.)

  I made an update of the firmware a few months ago and the currtent datecode is 20130703. Allowed to print from my Samsung S2 Tablet through the router.

  Here's what finally worked.

  1 had to withdraw from old installation CD but Uninstall selected, so I completely shut down the computer. Guy at Best Buy said to "remove the device" but it was not enough.

  2. download install the latest software from the HP download site and ran it. (http://ftp.hp.com/pub/softlib/software13/COL32431/bi-80329-11/hp_LJP1100_P1560_P1600_Full_Solution-v20120831-50157036_SMO.exe)

  3 downloaded another file and ran it. (Setup_IP4, [192_168_1_5], [NPI073E2D] _it) Not sure where I found this one, but the software prompted me to run.

  Finally, everything works and all devices are wireless printing