3050 printer all-in-one - connects to the new router?

Similar Questions

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• How one properly installed more than one printer all-in-one (different) on the same pcr?

  Once installed 1 All in one printer, how one installs another printer all-in-one (different model) on the same computer without altering the first installation because all software are the same for each all-in-one printer, with the exception of different drivers linked to each different model all-in-one printer?

  Hello Boothkp,

  From what I can understand in your post, you are looking for a solution install several all in printers on one system, without causing problems during the first installation. This can be easy.

  Lets say you have 2 printer that both use the version 14 of the HP Solution Center software. Then, you install the first complete printer with all the software you want to use. The second installation, you just select the option 'Add printer' or 'Add features', this will add then the second printer in the current center solution without a conflict.

  In case this does not work, then please give more information on the model and the operating system you are working on.

  Kind regards

  Van Baardewijk

• C7280 all-in-One connected wireless to modem-router needs a password when it is fed - up.

  Do you have examples of wireless connection to a HP Photosmart C7280-all-in-one to a network managed by a modem-router method NB6Plus4W? The modem-router attach also your desktop of Windows XP by using an ethernet cable and a laptop computer to Windows XP wireless using the default (wireless) SSID and password (a1b2c3d4e5).

  The wireless connection between the modem and router and the laptop happens automatically when the modem-router and laptop computer are powered.

  The wireless connection between the modem-router and the HP Photosmart camera does not automatically. When I put power on the HP Photosmart camera, I then use the setup on the Photosmart button and type manually in to the Photosmart (a1b2c3d4e5) password. The SSID also displays wireless, it doesn't have to be retyped.

  Do you know if there is no method or HP configuration that will result in the automatic installation of the camera HP Photosmart to occur when it is powered?

  What I am complaining about is having to manually type in the HP to HP password whenever the HP is powered.

  Go to Setup > network > advanced settings > IP settings and now select Auto and press OK. See if this stops the question.

  If that doesn't work, then go to settings > network > restore default settings of the network, and then run the Wireless Setup Wizard to connect to the network.

• Problem connecting to the new router

  When we all first our WVC54GC Setup was quick and easy, and we used it without event for 1-2 years. Now, we have replaced our old router with a WRT610N. Everything else, wired and wireless, connected to the new network without event after I have updated their SSID settings and security. (A new uses WPA - WP2, the an old WEP) but for this camera I can not to do. I read the articles on this page and plugged all the correct settings, but it still won't talk of it in wireless mode. (With a cable that is no problem). What I'm missing here?

  You must be identical on both devices wireless settings to establish communication between your router and the camera... Ensure that your camera settings Wireless 2.4 GHz of your router... Try Basic WEP security and see if that works, if WEP works you can change security to WPA... Once you have set matching the wireless settings, unplug the cable ethernet and power cycle the two devices and see if you can see your wireless camera...

• Unable to print - Officejet J5780 all-in-One, connected to the laptop USB

  I bought a HP all-in-one Officejet J5780 in 2008 and all this year I started having problems printing. I am a student online so I need to print assignment or documents related to the class of my laptop, or make other personal business which involves an impression. I connect the printer to my laptop with a USB port. I have Windows 7 Edition home premium on my laptop. When I bought the printer, I used it with another laptop with Vista. Last year, I bought a laptop.

  I'm going to open a document, click on print, a box will appear as if sending information to the printer, and then nothing happens. The file is located in the print queue whose status is empty. Sometimes stop the printer and re - start, it would start printing once reconnected. But no more. Sometimes if I start my printer first, let it sit, start my laptop, let it sit a bit, connect the USB cable, let them rest a bit, then try to print it will work. But it is rare now. Sometimes if I am performing a repair online it suddenly started working. But it becomes harder and harder.

  I guess I need to new drivers or something, but I don't know which ones to download from HP. This new laptop does not recognize the printer software disk came with.

  I try to start printing HP and doctor Scan and it detects my printer at the start, but at the next step, it does not, said that it can not be connected. I can print an alignment page or test page.

  Or is it time for a new printer?

  I know that is not the USB port on the laptop, because I used the plug with other types of USB cables and everything works. I was wondering if the printer USB cable is bad or corroded the output on the printer itself. I bought a new USB cable and tried. The printer has been detected, updated drivers, and until now it works fine.

• need to install printer all-in-one hp 2110xi to new hp Pavilion p7-1234 with windows 7 Home premium

  Everything that I need to install my HP printer is for XP. My new computer has Windows 7 Home Premium. The printer I want connest is a hp psc 2100 all-in-one.

  Hi fritts,.

  Follow the steps outlined in the document below.

  The driver for your product is included in the Windows 7 operating system

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• HP 3050 printer all-in-one: printer has stopped printing! HEEELP!

  HI HI!

  Please can someone help me! My printer can print some time back (5 months ago), but now it won't? The flashes of blue light wireless, but it does not print? I'm lost with her!

  Blue light flashing is an indication that the wireless is enabled but not connected to a network.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• HP Office Jet, printer all in one

  Cannot send a fax from my HP printer online. CD Rom is used for Windows 98, 2000, XP.  I have a Vista computer. It's all functions correctly except the fax.
  Need help

  Hi Josiebrown,

  (a) since when are you facing this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?

  (b) that you get specific error messages when sending a fax?

  (c) you have set up your computer to send and receive faxes?

  Step 1: first of all, install your computer to send and receive faxes, to do this, follow the steps mentioned in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-your-computer-to-send-and-receive-faxes

  Step 2: You can follow the steps mentioned in the link below:

  Solve fax problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-fax-problems

  You can also follow the steps in the HP link below:

  http://tinyurl.com/yhqkc6s

  Step 3: It is recommended to have the latest drivers for the device to use all the features of this one so make sure you have the latest drivers installed on the computer for your HP Office Jet printer all in one. See the link below

  http://welcome.HP.com/country/us/en/support.html

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• can a laptop running windows 8 work with a hp officejet 6210 printer all in one

  can do a [hp 15 laptop Clubhouse] laptop running windows 8, work with a HP officejet 6210 printer all-in-one?

  The Windows 8 shows it as being compatible hardware compatibility site.

  The drivers are located here.

  

• HP All in one Printer of 55 G: HP Officejet G 55 connecting to the new computer

  Good day for the United Kingdom

  I set myself treaties to a new Lenovo desktop.

  With the operating system of Windows 8.1.

  My old HP Officejet G 55, printer all-in-one is a trust serve for several years and has worked well.

  It was no problem and worked well until he presented my my new computer again. The girl seems to be shy or has big problems with his new roommate.  (I guess that driver problems)

  The new computer found the printer immediately, but seems to have problems when printing not

  print all documents, (some are complete, but several pages do not seem to want to print and it shows an instance of the error.

  I visited the site of HP and installed HP support assistance, I ran the printing doctor who finds the printer

  poster communicates with my printer, and then it blocks not appearing is not to achieve something.

  I guess now you can say I'm a complete novis in the computer (Old boy), which I think is expected a new computer to talk with an old printer. I tried to download the update of drivers, without success, I now ask I am doing the impossible, and I have to go out and buy a new printer?

  Any help and advice would be much appreciated

  Cordially a boy needing help!

  Thanks a lot for your kind reply.

  I'll try once more to download and update the printer drivers on the computer,

  using your statement. Otherwise, there will always be time to bite the bullet and buy a new printer to date.

  Greetings from the United Kingdom

  Thegardener

• Descjet HP 2050 all-in-one: I lost the disc to connect my printer to my computer

  I lost the disk that connects my printer to my laptop and got a new computer and need to print but I cannot connect to my new computer! How can I get a new drive or connect my laptop to my printer without spending too much money and do not buy a new printer?

  Hello

  The drive is probably obsolete now. Please download the software and drivers (for Windows) following and install on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL32609/al-109407-3/DJ2050_J510_1313-1.exe

  Kind regards.

• HP 3050 j610 printer all in one

  I have a hp 3050 j610 printer all in one, the scanner scans without problem, but it will not be printed. I have this printer set in place on a wireless connection, can someone help me with this problem.

  What operating system do you use?

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://goo.GL/3DAkq

• I have a belkin n1 vision router and a new printer all-in-one hp Office pro 8500 has, but the

  I have a Belkin N1 Vision router and a new HP Office Pro 8500 all-in-one printer (HPA7864C), but the wireless connect. I followed the instructions of the printer, but the better report reports that "MAC filtering" is enabled to possbly (or on) on the wireless router. I checked the router, but the "MAC filtering" is set to off (or off). What could be the issue that the printer will not connect to the wireless router?

  Best report:

  Without thread - OK

  Functions without wire - OK

  Network name (SSID) has been found - OK

  Security - OK

  Print settings are OK with the settings of the router - OK

  Unfiltered - NOT OKand then it stops!

  Connection - do not run.

  Problem was solved by changing the channel 6 to 11 of the channel on the Belkin N1 router.