HP L7680 - display offline with new router Xfinity

Similar Questions

• Printer wireless connected but offline with new router Xfinity

  A FIOS Actiontec router wireless, printer HP 6515 functioned well as a wireless network printer.  Just replaced FIOS with Xfinity Cisco router.  Shows printer HP 6515 as connected (print network configuration page) but both PC (Windows 7) indicate printer is in offline mode (no check mark).  Printer has set the IP address with FIOS router.  Running doctor printing & scanning HP without success.  Suggestions?  Thank you!

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• C4780 printer: Pinter offline with new router

  I recently had to buy a new router... Linksys EA2750. Printer does not recognize the network. I would appreciate any help with this issue. TY

  @eb153

  10.6 and HP Photosmart full feature software and drivers - Mac OS X v10.4, v10.5

  http://FTP.HP.com/pub/softlib/software11/COL28594/MP-70896-3/PS_AIO_06_C4700_USW_Full_Mac_WW_30.dmg

  Update critical to prevent and recover a façade for the HP Logo does not

  http://FTP.HP.com/pub/softlib/software11/COL35049/OJ-86830-1/HP_Firmware_Updater_C4700_3_2_1.dmg

  REO

• Unable to get online with new router-"Local access".

  Original title: can't get online with new router.

  I'm having a lot of trouble to get online with my laptop.

  My roommate has recently got a new EE Brightbox. It works perfectly well with his laptop and mobile phone. Also works with my mobile phone. However, when I try to use my laptop it only gives me "Local access". I have no problem connecting to the router, but it just won't let me go online.

  Tried to disconnect/reconnect the connection Wireless on laptop from scratch with wired connection to router, router and router reset re-booting. None of them have worked.

  Any help would be great?

  Laptop works on Vista.

  Hi Rob,

  Thanks for the reply.

  Have you tried methods of resolution of the problems mentioned in the previous answer?

  Please update the State of the question, we are here for you help!

• HP Officejet Pro 8100: unable to operate a printer wireless with new router

  The HP Officejet Pro 8000 has worked successfully for a year on a home network with 3 computers wireless using an internet ATT Uverse router.  The router was changed to another new router with a different network name and the WiFi password ATT Wireless and the printer does not work wireless. The printer does not work dedicated to a single computer with a USB cable.

  Should I download and reinstall a new driver?

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Unable to browse network with new router - HELP!

  My old WRT54G died a few days ago.  I replaced it with a WRT54GL which was the closest match.  Since the installation of the new router I can sail is no longer on my network. I set up the new router with LELA according to the suggested guidelines.  Might that have changed something?  All machines can go on the internet and I can ping all the machines through the command line, but when I try to look at the Working Group in the place of my network window I get an error message that says:

  "Workgroup not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.  The network path was not found. »

  When I run net view command in the command line which also translates into an error.

  When I hang on machines with a cable crossover, everything works fine, so I assume there are a few settings in the new router that prevents the list of course work.  Here is what I tried:

  Disabled the firewall on local computers and the router - makes no difference

  Ensured that all machines are in the same workgroup - they are

  Because the browser service and peer network services are running - they are

  Ensured that all the machines are on the same subnet - they are because they can ping each other

  Now here's something really strange.  When I rename the Working Group on all machines, they can see each other.  Once I have switch back to the name "workgroup" they can't see each other any longer and I get the error message.

  I run a small business and need to share files often enough.  I'd like to be able to get a NAS server, but I can't find any of it will work with ALL my machines.  Most of my machines running Vista at this stage, but a few are still XP Pro. One of my machines is XP Pro and cannot run SP2 which prevents execution on it a lot of new software and devices.  This is why I really need to get my file sharing ability back.

  Any help is greatly appreciated.

  Mike

  I solved the problem and I wanted to post it in case someone else has the same problem.  One of the machines use a Linksys WGA600N Dual Band Gaming adapter, as is the wireless card. Technically this makes a bridge.  I needed to restart.  That solved my problem.

  Mike

• Problem with new router WRVS4400N

  I recently bought a new Cisco WRVS4400N router for our network which has 19 computers connected to a switch of 24 ports.  We currently use a D-Link router and migrate to the Cisco router.  The problem I have is that as soon as I connect one of our servers or the switch 24 ports to the Cisco router I can no longer access the internet or the connection to the network, I can also access the routers of each server configuration.  If I connect the router to make a stand-alone computer I can access the configuration and change things, but as soon as I connect the server or switch 24 ports everything dies (all lights are green on the router but if everything is connected).

  Has anyone experience this problem with this router?

  Any help would be greatly appreciated.

  Kind regards

  Shawn

  Hi Shawn,

  Thank you for posting. The server provides DHCP on your network? If so, disable the DHCP server on the WRVS4400N before you connect it to your network.

• Wireless configuration of HP C4780 with new router and Mac (wireless network not found)

  About 10 months ago, I bought a new router. I already had several problems connecting my HP C4780 to my old router, and after setting up the new router, I was totally unable to connect the printer wireless to my router.

  I have reset the system to the printer on my Mac, I have reset the settings on my printer wireless, I downloaded the latest HP software, I've uninstalled and reinstalled the HP software several times and I have had no success. When running through the Setup Wizard, I was able to select the printer and method (wireless network set up by USB) before plugging the USB key. After that, the Setup Wizard says "Device not connected" (DUH!) and the screen select network said simply "no discovery goes Wi - Fi network." I ran the print to the printer from the Network Configuration, and he identified 15 networks (mine included). So, it seems that the Wi - Fi receiver on the printer still works...

  Any suggestions?

  P.S. This printer has been nothing trouble since I got it, and I wouldn't recommend it to ANYONE (I like actually...).

  After attempting to run the installer on my boot camp Windows 7 Ultimate version, I fell at last on an obscure statement in the configuration of the PC software for the c4780. It says to connect the computer to the router using the router WPS button.

  I have reset the configuration on the printer and turned off wireless the wireless, then I pushed the the router WPS button until the blue WiFi light on the c4780 lit. THIS SEEMED to BE THE KEY STEPS to CONNECT THE c4780 to MY ROUTER.

  After that, the configuration and setting up the printer on my Mac using the system of preferences was a piece of cake. Functions of the printer and the scanner work with Mac drivers.

  Problem solved... For now... This printer is so buggy, I have no doubt I'll have similar problems in the future.

• need help connecting HP envy 4520 with new router

  I have a new router. Cannot find where to change the settings of the printer. Cannot print.

  Reset the printer to the default network.  Then use the front panel wireless configuration wizard if your printer has it.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try channel 1 first and then the other one at a time.  Make sure that the printer and the router are spaced at least 5 feet.

  Brand and model of modem and router?

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• LaserJet p1102w: how to access the interface web printer with new router

  I just bought a new wireless router, hoping that I'll be able to more easily print with my p1102w.

  Internet access works ok desktop and laptop (wireless).

  However, I had bookmarked the IP address of my printer, and before, I've always been able to access it by clicking on the bookmark. I checked the range of IP addresses for the router, and the IP of the printer is outside this range, so I don't know why I am no longer able to access to this. I can't access the web interface, whether they come from my laptop or desktop (wired). However, the printer is capable of printing from the desktop without problem.

  How do I enter this? I would like to restart the configuration wireless configuration, but I thought I needed the web interface for this.

  I should just insert the CD? I made a tweak or two and would prefer to keep all the settings of the printer even if I can, but I can start all over again if I have to.

  
  HP LaserJet p1102w

  I just deleted the printer on my laptop computer, reset the settings of the printer default and then run Setup from the wired desktop wireless utility wireless. Seems to have worked, I can now access the web interface via my laptop now.

• HP Deskjet 3510: Cannot connect wireless with new router

  I got a new modem with router wireless integrated into my cable company.  Now, I am unable to connect wirelessly to my printer. He seems incapable of finding new wireless information.  The closest I could get the printer screen advised to 'hold the WPS button. '  However, my cable company has confirmed that the WPS NO button there and is not an option.

  Can someone help me get my printer working again?  Thank you!!

  @LisaC11

  Printer:

  E-all-in-one printer, HP Deskjet 3510 range

  Full software features:

  File name: DJ3510_1315 - 1.exe

• < textarea > display line with new car

  I am creating a page aspx with a text box and a button.

  The text box is created like this:

  If the text is longer than 30 characters long, the text will scroll but remain in a line and the user cannot see all of the text that he hit.

  I would like that the text automatically appears in the new line when the characters are more than passes the textarea component.

  In IE everything works fine, but in the BB browser the textarea works differently.

  Thanks for help

  It is a problem with the BlackBerry browser in BlackBerry handheld software version 4.6.0 4.6.1 and 4.7.0.  It does work correctly in version 4.5.0 and lower and has been fixed in BlackBerry handheld software version 5.0.

• HP Deskjet 3510: Got a new router wireless and cant print now

  Got a new wireless network and now cannot print with new router. I have 2 change all the settings on my printer and how?

  Hello

  You must configure your printer to recognize your new router.

  That is why such a need to be done through your computer, please specify what operating system you are using.

  In addition, your computer is connected wirelessly or with an ethernet cable to your router?

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• Satellite L40-143 - WLAN does not work with the new router

  WLAN on my Satellite L40-143 does not work since I Modem Alice-1121.

  Who can help me, please!

  Hi kenny_21,

  If you have a new WLAN router you must change the configuration that I think

  The new router is visible under WLAN connections and can connect?

  If so try to connect. The standard router password can be found in the manual of it and no doubt, there will be new addresses MAC first before connect you. I put t know the exact configuration.

  Also check the options the WIRELESS card with TCP/IP. Usually, you need automatic IP addresses.