Added Cuda accelerated GPU effects is suddenly very laggy?

Similar Questions

• Receive no benefit of using GPU acceleration/CUDA in After Effects CS6

  I've recently updated the graphics card in my Mac Pro 3.1 for an EVGA Nvidia GTX 680 Mac Edition and have set up so that after effects CS6 recognizes it as a compatible card as in many places, I read that it should work fine. However, I don't seem to receive all the benefits of using, rendering time a little longer, if it is not longer than before and previews just like sluggish. I've updated the graphics card and CUDA, set the preview of Ray-tracing for GPU and all the comps are set to display with the ray-tracing, but I still get no no performance gain.

  I noticed that under the information GPU in the OpenGL Shader Model information is empty and greyed out. I don't know if this is related to the problem, but I'm not sure why this is. Information under CUDA seems to be OK. I have provided the following information:

  Fast draft:	Available
  Texture memory:	1209.00 MB
  Ray-tracing:	GPU

  OpenGL

  Seller:	NVIDIA Corporation
  Feature:	NVIDIA GeForce GTX 680 engine OpenGL
  Version:	2.1 NVIDIA - 8.17.74 313.01.03f02
  Total memory:	2.00 GB
  Shader Model:	-

  CUDA

  Driver version:	5.5
  Features:	1 (GeForce GTX 680)
  Current usable memory:	1.50 GB (at the launch of the application)
  Maximum usable memory:	2.00 GB

  If there is no solution to how to get the benefits of CUDA in after effects, please let me know.

  As Mylenium says, you seem to be waiting for something which is not the case. The 3D rendering engine traced to the RADIUS does not speed up the rendering of the classic compositions from After Effects. It is rather a rendering engine to make a very limited set of manipulations in 3D (extrusion of text and shapes) and flexion of the 2D layers. Even these things are not fast with the traced the beam 3D rendering engine. they are just faster with the GPU that they would be on the CPU.

  Read this page carefully for more details of the GPU is used in After Effects:

  http://blogs.Adobe.com/AfterEffects/2012/05/GPU-CUDA-OpenGL-features-in-after-effects-CS6. HTML

• The GPU CUDA acceleration stops working PP CC 2015.0.1

  Hello

  I encountered a small problem with the GPU CUDA acceleration.  I've been running an EVGA GTX 570 for quite awhile.  I've relied on the GPU acceleration a bit for a smoother workflow, and recently he has virtually stopped working.  I'll drop a few clips in the timeline panel and apply color effects.  Usually, I can play for a few seconds and skip a few different points in the timeline panel, but once more the program monitor's going to be just black.  I get no error message and I can still hear the audio.  First restart will fix the problem temporarily, until it happens again.  I've resorted to just disable GPU acceleration using just the Mercury Playback Engine only, which solves the problem, but it is really too slow to work with.

  This only seems to happen in After Effects at all.  I started having this problem after one of the subsequent updates of 2015.

  I tried to update my graphics drivers, but it did not help.  Any help or ideas would be greatly appreciated.

  Computer: Windows 8.1 Pro 64-bit, Intel Core i7 3930 K, 32 GB RAM, GeForce GTX 570 (pilot 340.52), EVGA ASUS p9X79 Pro, 238 GB SSD

  Here's why, Neil:

  Version of the ability to calculate CUDA.

  You see, Premiere Pro CC 2015 now requires CUDA compute capability version 3.0 or superior for accelerating GPU of MEPS able to work at all. Unfortunately, GTX 570 your system's Fermi architecture more compute capacity is old, including the CUDA version only 2.x (in the case of the GTX 570, version CUDA compute capacity is only 2.0). In other words, the GPU in your PC is now too old to be properly supported in 2015 of CC. The latest version of first Pro CC to support properly such an older GPU was CC, 2014.

• After using the GPU effects

  Szalam, if possible, I'd like some information in what concerns this topic because I'm having a moment a little hard to get my head around how After Effects uses the GPU in some situations.

  For example, I have a comp UltraHD quite complex with a group of layers 3D element. Because we work closely with the 3D with element layers, we have the rendering engine in After Effects "3D Classic" on. Because I'm using a GPU K4200, I'll just follow the advice of Adobe and use the CPU for any trace of the rays since the K4200 is "unsupported".

  So now that I'm assuming that After Effects will do all THE processing of treatment on the CPU - with the exception of the work of 3-d element, which will be done only on the GPU, correct? Then now, I guess as long as I "simultaneous rendering of several images multiprocessing" something sensible (i.e. leaving 1/4 or preferably more like 1/3 of the available RAM to non - After Effects-related work and not hungry processors), then After Effects will try to max-out the processors as much as possible for everything except the item in 3D work (which will be hopefully out the GPU max). Is this correct?

  Is it interesting to use in load/no tested (for example the K4200) GPU to accelerate the raytraced render engine in this scenario (i.e. 3D only in the model elements are 3D, element, cameras and lights 3D layers), or is it better to leave it on the CPU and leave the single GPU for 3D element?

  Thanks in advance!

  Chris Hocking wrote:

  For example, I have a comp UltraHD quite complex with a group of layers 3D element. Because we work closely with the 3D with element layers, we have the rendering engine in After Effects "3D Classic" on. Because I'm using a GPU K4200, I'll just follow the advice of Adobe and use the CPU for any trace of the rays since the K4200 is "unsupported".

  Right. Your scene does not all the layers using the ray traced in her rendering engine at all, so leave it on Classic 3d is the best choice. The new version of the item has "drawn with RADIUS' shadows and whatnot, but which is unrelated to converter traced to obsolete radius of EI. EI raytraced render engine is essentially an effect pressing the Optix of NVIDIA GPU library. It was just to add depth to layers. People are often confused and think that turning traced to the rendered RADIUS on would hire the GPU to make this, but the only thing he never accelerated has been traced to the RADIUS effect (which has very few people have already used).

  Chris Hocking wrote:

  So now that I'm assuming that After Effects will do all THE processing of treatment on the CPU - with the exception of the work of 3-d element, which will be done only on the GPU, correct?

  Yes.

  Chris Hocking wrote:

  Then now, I guess as long as I "simultaneous rendering of several images multiprocessing" something sensible (i.e. leaving 1/4 or preferably more like 1/3 of the available RAM to non - After Effects-related work and not hungry processors), then After Effects will try to max-out the processors as much as possible for everything except the item in 3D work (which will be hopefully out the GPU max). Is this correct?

  Pretty much, Yes. There are other potential bottlenecks (if you use images out of an external device with a slow connection, for example), but it's like basic things will be.

  Chris Hocking wrote:

  Is it interesting to use in load/no tested (for example the K4200) GPU to accelerate the raytraced render engine in this scenario (i.e. 3D only in the model elements are element and 3D & cameras lights 3D layers), or is it better to leave it on the CPU and leave the single GPU for 3D element?

  Your scene, as you describe it, does not use the ray-traced rendering engine at all. The ray-traced rendering engine is just a way to add depth and dimension to natively layers in AE. Given that you do not use this feature, by turning your comp to use the rendering engine raytraced won't help what whatsoever and, instead, plu cause lead the times.

  But you can feel free to test yourself. Try a rendering with the standard rendering engine and with the renderer raytraced lit. See if you can see differences.

  Here is an official blog of Adobe on the GPU in AE: features GPU (CUDA, OpenGL) in After Effects

• pilot 368.39 breaks playback of acceleration GPU MPE of R3D files

  I've updated my GPU drivers to 368.39 but R3D clips display a black screen when I read in first Pro CC 2015.2. Solution: go back to 368.22 or Dungeon new drivers and disable CUDA renderer (file, parameters of the project, general... The video rendering and playback) by changing acceleration GPU MPE software only.

  All 368 xx drivers. I have this problem, you must go back to the previous generation of drivers like 365.19. see this discussion

• Problems with CUDA acceleration and playback of sequences of RED R3D

  I came across several errors and crashes on my PC last night while trying to open the first. So, I decided to reformat my PC and reinstall all the drivers and what not. Now when I try to read the raw R3D files in Premiere Pro to use CUDA acceleration, all video files are just black. It simply does not appears in the window preview or the playback of the source window. Non-ROUGE images works fine and when I go to only software acceleration, RED cheek images very well as well. Advice as to why this is happening? I've updated all my drivers and made a few uninstall / reinstall.

  I work with a Titan GTX, RED Rocket-X, 2 Intel Core Xeon (12) processors, 128 GB ram.

  Thank you!

  I have the same problem.

  If you order acceleration of OpenCL, you'll be able to read and make, but it's very bad performance.

  Word on the street is it of the xx 368 nvidia driver. do, I have not yet tried to install an older one, but I thought it should work

• After effects CC running very slow with El Capitan!

  Apple and Adobe, we have to answer you as soon as possible! We need this fixed number like yesterday. Since we have updated to the new os El Capitan after effects, first CC and encoder render times doubled. Our workload is now saved, and we need a quick repair. Help, please

  I found the solution smh... Adobe originally had the Mercury Playback accelerated GPU (OpenCL)-updated rendering engine after having upgraded to the new operating system and Adobe CC the default rendering engine update affects the MERCURY PLAYBACK ENGINE SOFTWARE ONLY. Just change the rendering engine to Mercury Playback accelerated GPU (OpenCL) and bingo your back in the game will thank me later. Peace.

• Suddenly very slow - being report attached - it's just the ram?

  
  

  
  

  
  

  Hi all

  
  

  my macbook suddenly turns very slowly, he has been allowed recently after some graphics clamping because it is so old!

  
  

  things are critical.

  
  

  If it's just the ram, (I doubt it, but maybe wrong!) can someone help me with my maximum?

  
  

  I think that his officially 4 (2 x 2), but remember reading that a 4 + 2 can work?

  
  

  Thank you

  
  

  Paul
  

  
  

  
  

  
  

  
  

  EtreCheck version: 2.9.10 (261)

  Report generated 2016-04-13 13:35:22

  Download EtreCheck from https://etrecheck.com

  Time 06:22

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  Suddenly very slow - opening system same pref is delicate. posing for the window of the attachment in mail for mac can take 2 minutes. No process obvious defect. Mac Word fails to meet very often. I hope someone can help! Thank you

  Hardware Information: ⓘ

  MacBook Pro (17-inch, 2.4 GHZ)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro3, 1

  1 2.4 GHz Intel Core 2 Duo CPU: 2 strands

  2 GB RAM - Insufficient RAM! Extensible - [Instructions]

  BANK 0/DIMM0

  1 GB DDR2 SDRAM 667 MHz ok

  BANK 1/DIMM1

  1 GB DDR2 SDRAM 667 MHz ok

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 5

  Video information: ⓘ

  GeForce 8600M GT - VRAM: 256 MB

  Color LCD 1680 x 1050

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - since the start time: about an hour

  Disc information: ⓘ

  FUJITSU MHW2160BHPL disk0: (160,04 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  The PR (disk0s2) MacBookPro /: 159,18 GB (28,37 GB free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  USB information: ⓘ

  Apple computer Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Built-in ISight from Apple Inc..

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com [no charge]. LaCie.ScsiType00 (1.2.11 - SDK 10.5 - 2016-04-13) [Support]

  com.jmicron.driver.jmPeripheralDevice [no charge] (2.0.4 - 2016-04-13) [Support]

  com.lacie.driver.LaCie_RemoteComms [no charge] (1.0.1 - SDK 10.5 - 2016-04-13) [Support]

  [no charge] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5 - 2016-04-13) [Support]

  Launch system officers: ⓘ

  [loaded] 9 tasks Apple

  [loading] 150 tasks Apple

  [operation] 55 tasks Apple

  [killed] 22 tasks Apple

  the 22 killed process lack of RAM

  Launch system demons: ⓘ

  com.apple.Kerberos.kdc.plist [failure]

  [loaded] 46 tasks Apple

  [loading] 152 tasks Apple

  [operation] 77 tasks Apple

  [killed] 12 tasks Apple

  12 killed process lack of RAM

  Launch officers: ⓘ

  [loading] com.epson.Epusp.plist (2009-07-06) [Support]

  [operation] com.flipvideo.FlipShare.AutoRun.plist (2010-10-11) [Support]

  [loading] com.lacie.eventsactions.launcher.agent.plist (2012-08-14) [Support]

  [operation] com.motive.alertDetectorHost.plist (2014-09-06) [Support]

  [operation] com.motive.userAgent.plist (2014-09-06) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-04-05) [Support]

  [operation] com.freemacsoft.appcleanerd.plist (2014-09-28) [Support]

  [failure] com.lacie.desktopmanager.service.plist (2012-08-14) [Support]

  [operation] com.motive.systemDaemon.plist (2014-09-06) [Support]

  [operation] com.sonos.SonosLibraryServer.plist (2016-03-16) [Support]

  [loading] com.sonos.smbbump.plist (2014-08-10) [Support]

  [loading] net.sourceforge.MonolingualHelper.plist (2012-11-13) [Support]

  User launch officers: ⓘ

  com.apple.SafariBookmarksSyncer.plist [loading]

  Items in user login: ⓘ

  None

  Other applications: ⓘ

  [loading] 386 tasks Apple

  [operation] 158 tasks Apple

  [killed] 35 tasks Apple

  Plug-ins Internet: ⓘ

  npMotive: 1.0.0 - 10.7 SDK (2014-07-28) [Support]

  FlashPlayer - 10.6: 21.0.0.213 - SDK 10.6 (2016-04-13) [Support]

  QuickTime Plugin: 7.7.3 (2016-01-14)

  Flash Player: 21.0.0.213 - SDK 10.6 (2016-04-13) [Support]

  JavaAppletPlugin: 15.0.1 - SDK 10.11 (2011-11-27) check the version of

  Default browser: 601 - SDK 10.11 (2016-01-14)

  OfficeLiveBrowserPlugin: 12.3.5 (2016-02-09) [Support]

  RealPlayer Plugin: unknown

  Silverlight: 5.1.20913.0 - SDK 10.6 (2013-11-17) [Support]

  iPhotoPhotocast: 7.0 (2012-11-13)

  3rd party preference panes: ⓘ

  Fan control (2007-10-03) [Support]

  Flash Player (2016-04-05) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  MacBookPro PR: disk size: 159,18 GB disc used: 130,82 GB

  Destinations:

  Time Machine [Local] backups

  Total size: 0 B

  Total number of backups: 0

  An older backup: -.

  Last backup: -.

  Backup disk size: too small

  Save the size 0 B < (disc 130.82 GB X 3)

  Top of page process CPU: ⓘ

  7% kextcache (3)

  4% kernel_task

  4% WindowServer

  3% activity monitor

  1% mdworker (8)

  Top of page process of memory: ⓘ

  Kernel_task 311 MB

  150 MB com.apple.WebKit.WebContent

  Mdworker (8) 94 MB

  63 MB activity monitor

  49MO Finder

  Virtual memory information: ⓘ

  60 MB of free RAM

  1.94 GB used RAM (502 MB cache)

  2 MB used Swap

  Diagnostic information: ⓘ

  April 13, 2016, 12:54 ~/Library/Logs/DiagnosticReports/suggestd_2016-04-13-125400_[redacted].crash

  /System/Library/PrivateFrameworks/CoreSuggestions.Framework/versions/A/support/ suggestd

  April 13, 2016, 12:47:39 PM/Library/Logs/DiagnosticReports/Microsoft Word_2016-04-13-124739_ [redacted] .hang

  / Applications/Microsoft Office 2008/Microsoft Word.app/Contents/MacOS/Microsoft Word

  13 April 2016, 12:27:03 self-test - spent

  April 13, 2016, 11:27:19 AM/Library/Logs/DiagnosticReports/Microsoft Word_2016-04-13-112719_ [redacted] .hang

  the 2007 17 "MBP may be increased up to 6 via a 1 2 GB and 1 GB a 4 GB PC2-5300 DDR 2 667 MHz. chips

  2 GB, trying to run 10.11 and then DO something ELSE that the operating system will stretch this system.

  more RAM will give this computer room to breathe when he tries to run this OS.

  I recommend these guys to the United States, and they also have a European distribution

  http://eShop.MacSales.com/MyOWC/upgrades.cfm?model=268

• LaserJet Pro M477fdn MFP: Print LaserJet MFP M477fdn Pro sudden very bad quality

  My LaserJet print quality has declined. Very, very light on all cartridges. HP utility > report shows supplies all the cartridges to between 30 and 50% of about 800 pages (black), 200 (yellow) remaining. But, HP utility > supplies management says "cartridge to very low behavior. Was an update last week I think. Maybe when the problem started. Not a gradual reduction in quality. One day everything was fine, the next day, suddenly very poor, light quality.

  Hi, Will,

  Let me advise you to do what follows, I work in reality for HP, normally this problems can appear after an update of the firmware more precisely on the 477 models, try the following steps:

  1. go into the Setup menu

  2. go to system set up

  3. go in print quality

  4. Select color grading and then press on calibrate now

  5. After all the sounds stop and the printer goes back to ready status without any attempt of messages to print something to see if it improves

  6. If the problem persists or improved but not yet developed acceptable, try 2 color calibration steps more and print something again

  7 if the problem persists I would recommend you to reach our customers telephone support for Laserjet devices.

  I hope that helps you, really confident im, what should be, Kudos to pkazmercyk for letting me know that you need help.

  Kind regards

  EstebanHP

• Can I activate CPU CUDA in After Effect CC 2015?

  Welcome

  How can I activate CPU CUDA in After Effect CC 2015?

  My laptop:

  HP ProBook 4540 s

  AMD 7650 m

  Graphics Intel HD 4000

  CORE I5

  Thank you.

  I don't think you can with this Intel 4000

  CUDA, OpenCL, the Adobe Premiere Pro and Mercury playback engine | First work Pro area

• Lightroom 6 suddenly very slow.  All my changes drag on the screen at least + 10 seconds.  The screen seems frozen between each edition.  I use a macbook pro and all my programs are up to date.  Help, please

  Lightroom 6 suddenly very slow.  All my changes drag on the screen at least + 10 seconds.  The screen seems frozen between each edition.  I use a macbook pro and all my programs are up to date.  Help, please

  Hi janeslens,

  • Go to Lightroom > Preferences.
  • Also please go to preferences > Performance tab and uncheck the box "use graphics processor.
  • Restart Lightroom and see if it works.
  • Please make sure you also update of Lightroom to the latest version, which is 6.3 Lightroom

  Let me know if it helps.

  Kind regards

  Tanuj

• Acceleration GPU in Photoshop

  Hello

  What is " " GPU acceleration " ?

  What is "acceleration GPU in Photoshop?

  Thank you

  Please read GPU and OpenGL features and preferences. Photoshop and Bridge. CS5, CS4

  It gives a list of starting with Photoshop CS4 GPU features.

  That said when it started, and what he does. You turn here in Edit > Preferences > Performance.

  

• With the help of NVIDIA GTX970, it will allow acceleration GPU rendering and playback instead of Mercury playback engine software only option?

  I want to buy GTX 970 NVIDIA,

  With the help of NVIDIA GTX970, it will allow acceleration GPU rendering and playback instead of Mercury playback engine software only option?

  Yes.

• SLI and CUDA acceleration

  Currently, I run a X 58 system with double 680 GTX in SLI and I always wondered do I get CUDA acceleration in Premiere Pro CS6 on one of the 680's when SLI is enabled? I know I can disable SLI but if CUDA acceleration will always work on one of the cards the same with current SLI I rather leave SLI enabled since I use this machine as well for games (where the SLI) like I do for video editing.

  Thank you:

  Hugh

  SLI is not supported and will only cause problems. Best to remove the second card and get a second machine for the games. Games and editing aren't a happy couple.

• How is acceleration GPU of MPE is slower than software only for export on my system?

  I installed the GTX285.  Enabled acceleration GPU of MPE.  A clip has exported (source images: R3D 4 K) with encoder to 1080 (h264).  It took 41m42s to finish.
  
  I turned off acceleration GPU MPE (so now it's MPE software acceleration only). I exported the same clip with the same settings (1080, h264).  It took 35m45s.
  
  How is it that the GPU acceleration is slower by nearly 6 minutes?  All variables were the same in both cases.  Can someone please give an idea as to why this is happening?
  
  I have a quad 2010 (3.2 gHz) Mac Pro 5.0.2 PP with 10.6.5 OSX with 16 GB of RAM.

  Thank you.

  Start the Benchmark PPBM5 and PM me the results. If your configuration is correct, you would see a multiplication by 10 of the time made without MPE. It will also show how your system behaves in relation to others. Do not follow the instructions to the letter. It is the best way to check if everything is OK.