Adding a TX9000 and TX1300 to CUCM

Similar Questions

• Toshiba ACPI device driver based on added value logical and general purpose

  Had to rebuild my Satelite A40 from the recovery CD and I get a message asking me to install a TOSHIBA ACPI-Based added value logical and objective general Device Driver. He can not find a file called tvalz.sys and I can't find a download appropriate on this site... can someone advise. Thank you James

  Hmmm I think that ACPI-Based added value logical and objective general Device Driver belongs to the Toshiba common Modules.

  This utility of common Modules can be found on the European driver Toshiba page.
  Download and just install it again.

  But I wonder why you should install it after using the Toshiba Recovery CD?  :|
  The restore CD contains all the necessary drivers, so I think that this common modules must be installed. But who knows

  Try my advice and install the common Modules as shown above

  Good luck

• I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It will be useful.

• DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. Now, I've added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers, and a stop at 01:29:32:17 (th

  DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. I have now added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers and a cleat to 01:29:32:17 (the end of the film). The combustion is interrupted with a message to watch a C:\Users\ianle_000\Documents\20151206160446.iso file. There is no file. The message also provides a link for an explanation. This Web page is impossible to obtain. I'm running on a PC with Windows 8.1.

  Thank you once again. I burned the DVD!

  It is the first film for which I have reached the stage of burning. I'm not sure why she didn't in the first place. I tried to burn the "no menu" version, but at the time, was shot the DVD itself - I wonder when he reached this point?

  So, I burned the "no menu" version to another DVD, that worked, then the version of menu, with no cleat to a third DVD, which reads perfectly.

  Now that I have a successful routine, I'll stick to it.

  Thanks for all your help.

  I'll close this discussion now.

• Get an error (you do not have sufficient permissions to perform this task) when adding a header and a footer. Any help?

  Get an error (you do not have sufficient permissions to perform this task) when adding a header and a footer. Any help?

  Hey veeran14642260,

  Us would certainly help.

  Could if it please let you me know what software used to create the PDF file. What is the software Acrobat Live Cycle Designer or something else?

  If you have created the file using Live Cycle, then it would be possible that you do not have permission to add the header/footer in the file.

  In addition, check under "file > properties > Security" and check if there is no security on the PDF file.

  Let me know.

  Kind regards

  Ana Maria

• Pages - adding html, meta and body

  I have a model with meta tags html and body already established. I just want to place holders on the page (for the page content area), but I'm findong that I can not add a single title, the restriction of research or the custom seo on this page change without him adding html surrounding (and other), the body, and meta. What I am doing wrong. What is suggested to fix that, when you use a template?

  You need not title of the page meta description or keywords in the models. The pages will be to create them. When you're on modules like blog, you need to add the tags and HTML in large layouts produced to make them. Even too much for products.

  Like I said, BC takes the information from the head html it creates and moves it in the top of the rendered page. It is not made in all other tags, which removed.

• TX9000 and server TP 8710

  

  If TX9000 is set to 720 p, TX9000 how much could be supported by a blade 8710?  TX9000 should be counted as stereo or multichannel Audio?

  24 720 P stereo and multichannel 8-port.

  BTW, I want to deploy TX9000 + CUCM + 8710 without VCS. It work?

  Hi people,

  
  In HD mode (720p), a single Cisco TelePresence Server hardware unit supports 10 content ports and 16 video ports. This means the server should be able to host 5 TX9000 systems at the same time as each screen will use a video port.
  
  This is old information, in fact, TP Server supports up to 24 ports in mode HD (720 p) or 12 ports in Full HD (1080 p) mode. License consumption behavior changed depending on version 2.3, now, you have either 24 HD or Full HD 12.
  That said though... The below table from release 3.1 shows you should be able to make 6 (Three Screen) calls at 720p with content at 720p30.
  
  
  It's true. If you have a TX9000 (720 p) sharing presentation to 720p30, each TX will have 2 licenses of the screen, you can connect 6 TX9000 endpoints. But if you lower the quality of the presentation of 720 p 30 to 720 p 5, each TX aura 1.5 licenses, so you can connect to 8 TX9000 endpoints. I recommend it, because most users use just presentation sharing to share power point and another static images.
  Concerning
  Paulo Souza
  Please note the answers and mark it as "answered" as appropriate.
  		   

• When I add a bookmark, I get hundreds of multiple entries for the same bookmark in the recently added bookmarks folder and the bookmark tab. Difficulty?

  Adding a results of bookmark in 100's of entries for this bookmark on the Bookmarks tab and in the recently added bookmarks folder. The only way to remove them is to click and delete each separate entry? Any idea what is happening or how to fix it? Thank you.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select General.
  Find and stop using hardware acceleration.

  Search web sites secure. Are there problems?

• Added Yahoo Toolbar and Add-ons Manager no longer shows the extensions one I can't access the function "get addons".

  I added a Yahoo toolbar for Firefox that has been customized for Frontier Communications. I Ghostery installed as an add-on, and she flashed a message that Yahoo toolbar confused its effective functioning and I would like to disable or uninstall the toolbar. I open the Add-ons Manager to do and much to my surprise he now showed no extension at all, but they all seemed still works! All my plug-ins appear when I look on the Add-ons Manager. I checked the "Get function modules and it tries to load but does not succeed." I am running Firefox 10.0.2.

  Please also try to delete the extensions.* files in the right out of the Firefox profile folder. Firefox will recreate the files and information. Please note that at the next startup, Firefox can request permissions, opening several tabs with each tab corresponds to a detected extension. Select allow the installation, click continue, but click on restart only on the last tab. You can also try to leave out the suspects without selecting modules and continue. I hope it will solve the problem.

  Files & Firefox profile folder

  Another way would be to try a new profile. Firefox stores the data from profile/personal separately from its installation folder. If the new profile is correct, you can later copy/replace files of the old profile in it, for example. the places.sqlite who holds history + information of favorites, the folder of bookmarks which has backups dated only bookmarks, signons3.txt + signons.sqlite which are necessary to restore successfully a saved website names to user/passwords etc. Please note that in this case, although it is also possible to copy the extensions it may be preferable to install again via Tools > Modules search box or AMO.

  Profiles Howto

• Pavilion dv7t-3300: weird behavior after adding the SSD and RAM upgrade

  Has just added a new HD SSD to my note as "disk 1"(the former one is 'disk 0', he has a Win. " 8.1 works). Installed Win. 10 in the new drive and everything has worked well so far. I tried to upgrade the memory, so I bought two Crucial DDR3 1333 with 8 GB memory each, the previos configuration were two 2 GB memory (4 GB total).

  The question is: If you use a single memory (8 GB) everything looks Ok. If I add the other (16 GB total), the new SSD is not recognized, but the old man works as usual. The new drive is not yet recognized after botting from the former (not even from the Disk Manager). Already tried to drag the disks with no luck. There seems to be something with the memory, since everything works with a memory of 8 GB or with two 2 GB memory, but with two memoirs of 8Gb the new SSD seems to be dead

  Advice or similar experiences? Is there something that I am missing?

  So much worse... the SSD seems to be broken or something similar. Does not work on the other PC, then... I guess that this has nothing to do with the memory

  BTW, the 16 GB are works fine

• Added properties (Group and channel) are not a numeric data type.

  I use a use to add two groups and channel custom properties. The properties are text and digital, double and whole.

  When I create a request in the browser, I selects the custom using the drop-down list property, but has only the drop operator "=" or "<>". "" The property is displayed in the data portal is a number of float. I had this problem when I was adding properties custom by using a script. I then tried "Navigatorinstallation / my Index DataFinder/Reset/Reset", then repopulated my search box, using the use on my raw data files. At this point, all the properties of my have only the "=" or "<>" choice of operator in the query.

  It seems that my properties are digital in the data portal, but the the query string of the browser.

  Thanks in advance,

  Hi Bill,

  You don't have to delete the files.  Choose the NAVIGATOR menu "settings > My DataFinder > reset... '. "can clilck on the UPPER part of the two buttons, one called"reset the index.  Which will remove all records in database and re-index all of your data files.  If you one of these properties have already optimized, set their State not optimized before resetting the index, otherwise the optimized property data types will persist.

  If this does not help, then the problem could be in the use that you use.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• I just added parental controls and now asking me my code how remove it?

  Parental controls-added comments & gave him a name-now system ignores me as an administrator, ask my code for everything. How can I return to normal, that is to say, NO parental control!

  Used to have an icon called "icon of the owner.  Now to have icon 'owner' more 'Parental control icon.  System will not answer me and keeps asking for PASSWORD.  I want my own back and WITHOUT Parental control password.  The system is Vista.  star04188

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  "Adjust settings, manage user accounts.

  They will help you in the Forum above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read the BANNING of cracking of passwords information tools information provided in these forums in the thread above posted by Bill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• Pavilion dv7-4080us laptop, Windows 7. Adding a keyboard and an external display.

  I added a Samsung LED HDMI monitor and it works.  I added an external keyboard via USB and it works.   However, when I close the laptop screen/lid on my laptop, the computer shuts down.  How can I close the laptop lid/screen and keep the computer running?  I want to place the external keyboard on top of my laptop because my desktop space is limited.  Thank you.

  To be able to close the lid of the laptop and continue to use the external monitor, you have to change the power settings.  Follow these instructions.

  1. Right-click on your desktop.
  2. Select"customization".»
  3. Then select screen saver at the bottom right.
  4. In the menu of the screen saver, select "change the power settings.
  5. On the left side you will see "change the closing the cover.
  6. Select this option and change the settings you want.
  7. Finally, in the power of change settings menu you can change your power plan (when connected to the top) so it works more like a desktop computer and hard drives will not shut.

  I hope it's useful!

• C20 and 8.5 CUCM

  I found the documentation on how to record my C20 in CUCM 8.6 but nothing about CUCM 8.5.

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/codec-c-series/TC5/administration_guide/administering_endpoints_running_tc5_on_cucm8-6.PDF

  I wonder if it is possible with this version 8.5 or I'll have to upgrade to the version at least 8.6. Is this possible? My version of the system: 8.5.1.11900 - 21

  If so, can someone point me to the right direction?

  Thank you

  Andre Lima

  Hi André,.

  in case you want to save C20 as native of CUCM device, then you must have CUCM 8.6.1 or later with the version of the software on C20 TC 5 or later.

  you will be able to save C20 as CUCM 8.5 third-party SIP device

  In case you register C40 to CUCM as third party device, you must create a user to digest authentication purposes

  Phone select as a (Advanced) third-party SIP device.

  Of fact necessary configuration the C40

  1-> advanced Configurations configurations-> SIP

  2 configure the SIP URI as [email protected] / * /

  3. Select the default Transport like TCP

  4. Select the Standard Type

  5. configure the address IP of CUCM in the SIP proxy address

  6. set up the authentication information with the username and Digest credentials, configured in CUCM

• HP nc6400 Business Notebook: adding RAM nc6400 and part numbers

  Vista Home Basic 32-bit SP2

  Dear friends, hope that your door!

  I have a HP nc6400 and I would go from 1.5 GB RAM.

  I understand that I can install as much as 4GBs? Let's just say I have add 1 GB or 2 GB how much improvement
  If I could hope?

  I don't want to spend a lot of money with a thisage computer, BUT I know that she will behave better with more RAM.

  Will I need to make changes by adding more RAM?

  Finally, what are the part numbers for the 1 GB and 2 GB memory expansion sticks?

  I would ask the HP numbers for these upgrades of RAM that I couldn't find them anywhere

  Any help or suggestions are greatly appreciated.
  Sincerely, Ralph

  Hi, Ralph:

  At that time, the standard was 1 GB under the keyboard.

  No doubt if a customer wanted to have the phone set to 2 x 2 GB, they would have paid a huge premium for this option.

  Today, with fancy Web page and operating systems graphics devours more memory, 1 GB is next to useless.