Adding additional iSCSI Volumes?

Similar Questions

• NAS to Nas backup for iSCSI volumes

  Hello

  I have a NAS PX12-400r, with some volumes are configured as iSCSI volumes, connected to different servers.

  I would like to find a nas to nas backup solution, in order to back up or synchronize the entire volume to an another NAS PX12-400r.

  I want to do it using only the SAR in a transparent way for servers connected to iSCSI volumes, or one-third of the machine.

  Concerning

  Gabriele

  Hello ecohmedia,

  For NAS to NAS (data) transfers, your only option is running from part to part.

• Configure the iSCSI Volumes

  Hi all!

  Its the first time install Ubuntu Server on a Power Edge 2950 to me and
  The question is when it comes to partitioning, it said that it has detected that active SATA disks--"one or more drives containing Serial ATA RAID configurations have been found. You want to activate these RAID devices? Turn on Serial ATA RAID devices. They gave me two options 'Yes' or «» I clicked 'Yes' because I thought that this would allow Ubuntu server configure RAID1 during installation. However, I was led to the disks Partition that says "this is an overview of your currently configured partitions and mount points. Select a partition to modify its settings..., and there are three options to choose from, namely:
  Configure the iSCSI volumes
  Undo changes to partitions
  Finish partitioning and write changes to disk

  So I don't know if I'm doing the thing to write here. When I chose 'To configure iSCSI Volumes', I was prompted to choose either log on to the target iSCSI or finishing. I don't know what to do from here.

  Any help would be greatly appreciated.

  Thank you

  I found the solution, the problem was that the hard drive Master Boot Record was not present.

  I run a Ubuntu Live CD and install it. The hard drive is already detected and the installation was successful.

  Thank you very much!

• Adding additional disk to ESXi 4.1 Datastore on Dell PowerEdge R710

  Greetings,

  We currently have a Dell PowerEdge R710 with 6 SAS das drives configured in a RAID-1/RAID-5 configuration. A drive is configured as a global hot spare. I would add this spare drive in the RAID-5 table, where some virtual machines live, to recover additional space. Has someone managed to do this? Is the only way via the PERC BIOS management utility?

  Thank you!

  I'm not part "raid-1/raid-5.  But assuming that the table is raid-5, then yes it is possible and yes the BIOS utility is necessary.  The hot spare is currently set should be removed from this role, then added to the existing Bay raid-5, but without the ability to select increase.  This will create free space on the raid-5 array on which then a new logical volume can be created, which will be then seen by ESX as a new drive and therefore another data store can be added to this (or it can be added to the first as a measure).  HTH

  http://blog.peacon.co.UK

  Please give points for any helpful answer.

  Unofficial list of transfer USB devices work

• Pavilion 500-189: usefulness of adding additional memory to a computer desktop Pavilion 500-189

  Hi - I think adding memory RAM additional to my desktop HP Pavilion computer model 500-189, bought in February 2014. It runs under Windows 10 home ed., 64 bit with RAM total to 10 GB. The computer has 4 memory slots and currently only 2 are used: slot 1 has a card 2 GB Hynix/Hyundai 1600 MHz and slot 2 has a card 8 GB Kingston 1600 MHz.

  I'm currently pondering adding a single 4 GB DDR3 1600 MT/s PC3-12800 CL11 map of 240 pin unbuffered UDIMM in each of the last two slots to bring the memory total amount up to 18 GB. The total cost would be less than US $40.

  My question: This inexpensive upgrade will not improve the performance of my computer or is - this exaggeration only change?

  Comments or suggestions would be greatly appreciated.

  Graphene, welcome to the forum.

  Now, we are dealing here with reviews.  The sweet spot for memory seems to be 8 GB with Win 10.  In fact, I read that you will be hard to see a difference between 8 and 16 GB.  I use a laptop of Omen HP with 8 GB memory game.  It manages all the games that I played very well.  As you said, you already have 10 GB of memory and the processor is very fast.

  Yet once, is discussed in the opinion.  In my opinion, the best upgrade that can be done today is an SSD.  My HP Omen loads games and programs incredibly quick and starts in 7 seconds or less.  I used a Samsung EVO 840 500 GB SSD in HP Phoenix Gaming desktop computer.  Again, it was incredibly fast.  Here is the SSDthat are recommended by Crucial memory.  They make great products for OEM computers.  I found the research that Samsung SSD seem to work better with HP motherboards and normally don't require changes to the BIOS works properly out of the box.   In addition, Samsung has its own Migration of data and Software Wizard software to fine-tune the SSD after installation.

  This should give you pause.  If you decide to go with an SSD, I'd be happy to tell you how I did the installation.  It has worked well for me.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Write to the table, adding additional rows in the csv file

  Hi all

  I created a program that measure current over time.  It works well, but when I write to the spreadsheet, there are additional lines between the row of data.

  I've created a header file, which is passed into the while loop where the data entered in a table and then entered in the worksheet.  If I simply display the table, there is no additional lines, but when I open the file csv in excel, there are more lines.  I'm pretty new to labview, but everything works the way I want to (it's a simple program) apart from that.

  There is a trolley or jump back in your chain of row data.  You can get rid of that by adding a "trim whitespace" function between the function of "visa read" and "replace the subset of the table.

• How to publish a second film of a chronology that comes with having some added additional JPGs. Error message - some missing files when trying to publish.

  Film released OK several clips, voice, subtitles, etc. Try adding a couple of logos starting and finishing and republish. Now, the States of files are missing when trying to publish. Any ideas? Thank you

  All the original source (Photos, video clips, Audio clips) files are
  still available in the original folders, they were imported from?

  You see any red Xs in the component Collections of Movie Maker?

  If your additions are just at the beginning and at the end... you could try
  import your duly completed. Film WMV file and add at the top
  and ending to it.

• Query OBIEE adding additional tables in from clause

  Hello

  I have a logic with multiple LTS in tables when trying to query form only one column this logic table adds a few additional tables in which the clause of the query. Could if it you please let me know what could be the reason behind this issue.

  Here, I would add the query should be and what query generates OBIEE.

  I have a logical table - T_SO_ACCRUAL_PRODUCTS with source table logic multi.

  tables is LTS - INV_PRODUCT_GROUP1, Inv_Accrual_Groups, Inv_Grade_Code, Inv_Item_Classes, Inv_Item_Codes, PS_DAILY_STANDING_DETAILS, T_So_Customer_Request, PS_DAILY_STANDING_DETAILS_FREZ, T_So_Request_Details, T_SO_ADJUSTED_QTY, T_SO_ACCRUAL_MASTER, T_SO_ACCRUAL_PRODUCTS

  Now I have an ITEM_NUMBER column in the Inv_Item_Codes table (which I added in forT_SO_ACCRUAL_PRODUCTS LTS).

  I select only that ITEM_NUMBER in analysis of BI to find only the ITEM_NUMBER in INV_ITEM_CODE, so that the query selection must be--

  Select 0 distinct as c1.

  D1. C1 C2

  Of

  (select distinct T2010613. ITEM_NUMBER C1

  Of

  SALES_E0. D1 INV_ITEM_CODES T2010613)

  But the query I get in the nqquery.log file.

  Select 0 distinct as c1.

  D1. C1 C2

  Of

  (select distinct T2010613. ITEM_NUMBER C1

  Of

  SALES_E0. INV_ITEM_CODES T2010613,

  SALES_E0.PS_DAILY_STANDING_DETAILS T2010846,

  SALES_E0.PS_DAILY_STANDING_DETAILS_FREZ T2010861,

  T_SO_CUSTOMER_REQUEST T2011274,

  T_SO_REQUEST_DETAILS T2011561,

  SALES_E0. T_SO_REQUEST_TRANSACTIONS T2011657

  where (T2010613. ITEM_NUMBER = T2010846. ITEM_NUMBER and T2010613. ITEM_NUMBER = T2010861. ITEM_NUMBER and T2010613. ITEM_NUMBER = T2011561. ITEM_NUMBER and T2010613. ITEM_NUMBER = T2011657. ITEM_NUMBER and T2010846. CUSTOMER_NUMBER = T2011274. CUSTOMER_NUMBER and T2010861. CUSTOMER_NUMBER = T2011274. CUSTOMER_NUMBER and T2011274. REQUEST_NUMBER = T2011561. REQUEST_NUMBER and T2011561. ITEM_NUMBER = T2011657. ITEM_NUMBER and T2011561. LINE_NUMBER = T2011657. LINE_NUMBER and T2011561. REQUEST_NUMBER = T2011657. REQUEST_NUMBER)

  ) D1

  I don't understand, why is the addition of these additional tables that I select only one column of the INV_ITEM_CODES table.

  Does anyone have an idea about it, why he adds these additional tables in the query?

  Thank you in advance for your help!

  Gerard

  [nQSError: 43119] Query Failed: [nQSError: 14025] indeed no table exists at the level of detail required

  Possible reasons:

  (1) level of content is not defined in the layer MDB of the SPR to one of the measures or dimension

  Logical Table-> content-> logical level tab-> Fact1/Fact2/Dim1: Source

  (2) Admintool WARNING: logical dimension table [39008]... a... a source that do not adhere to any source of fact.

  -> to check business model (and by the way of physical model) diagram for: Fact1, Fact2, Dim1

  (3) lack of aggregation method the measurement made ('Aggregation' of the measurement column tab)

  -> set aggregation (perhaps ' amount') for measures

  Looks like you have a lot of tables, but put them as sources of logical table, when they could not logically be related ' ' it... If you want you can send me your SPR and I can watch what you are doing.

• Error in adding an iSCSI LUN - use software iSCSI initiator...

  Hi guys,.

  I can't add an iSCSI LUN to my host ESX4.0. It is the iSCSI Software initiator that is activated and I can see the LUN after I launch a new analysis.

  While adding the LUN as a data store, it throws me an error, please find the attached for the snapshot file.

  The real question is if I add a lun iSCSI and then remove it and again try to re add it whether or nor the old signature are found that do not readd it.

  Is there a command that I can use to remove all the LUNS already assigned and delete it existing signatures.

  Let me know guys if the above is not clear.

  Kind regards

  Use fdisk to create a partition and vmkfstools - C command to format the partition as VMFS. You use a supported storage array?

• Adding additional disk space to Perc 6 / i server R710

  I have currently 3 250 GB installation as a raid 5 (original configuration) disks on a server R710 with a Perc 6 / i controller.  I ordered 3 discs (same readers) that we are running out of disk space. There is a set up disk C: and D:.  Can someone point me to instructions for adding these additional disks for the raid existing (drive D) without having dataloss?

  Thank you

  Gary

  If you don't have that one 'disk' listed in disk management, then you have only a single VD configured, which is good.

  You must install OMSA to broaden your VD. You then insert your new drives, make sure that they show as ready under physical disks, then go to virtual disks and select Reconfigure to your RAID 5. Adding two drives in your RAID 5 will add about 500GB (bit math makes it a little less) to your current Windows 'disk '. After the reconfigure statement, you will have something similar to below. Then, assuming that you do not run 2003, you click on the D: drive and choose Extend to finish with the second photo:

  

• PE T610 - Perc 6i - strange state after adding additional drives

  Hello

  We have a PE T610 with a PERC 6i controller.

  X SATA 1: 2 250 GB virtual disk in a RAID-1

  X SATA 2: 3 500 GB of disk virtual in a RAID-5

  We have added 3 additional 2 TB drives to the server.  A drive has been designated as a Global Hot Spare.  Two other readers have been added to the Bay RAID-5.

  I predicted, using 500 GB each among the readers added two for Virtual Disk 2.  Then, I had planned to use the other 1.5 to among the readers as Virtual Disk 3 in a RAID-1 array.  I did it with other servers in PE in the past.

  But after that the 500 GB is used from each of the discs, I can't used the remaining unused space.  It shows the 'available RAID disk space' as 0.00 GB.

  Why the remaining space on these disks is not available for me to use?

  Thanks for any help on this.

  Bryan Hunt

  «I've waited with 500 GB each among the readers added two for Virtual Disk 2.»  Then, I had planned to use the other 1.5 to among the readers as Virtual Disk 3 in a RAID-1 array.  I did it with other servers in PE in the past. »

  This was allowed on a VERY small number of controllers found in Dell servers.  Anyway, you can do that on 6 PERC.  You can replace your existing 3 drives with 2 TB drives, then create a second table (6 to) on the disks (all disks in a disk group must have the amount of space available and impossible to replace the drives with the greatest and to increase the existing RAID array size).

• Adding additional memory to Satellite 1900-303

  I'm trying to locate the original 256 MB of ram upgrade to 512 but can't find it! I already added a 512 in the spare slot and works well, but where the hell is the original? He says there are two openings in the manual... help please

  Hi rockpebblar_1,

  What model of laptop you have exactly?

  On some laptop computers, you can find a location of memory under the keyboard. This means that you need to remove the keyboard first before you can exchange the RAM.

• ISCSI Volume resizing

  I resized the volume, but the connection to a current server and one to test with indicates the volume at the same size in Device Manager. Why 2008 and 2008 R2 servers shows the old size and I don't then expand.

  The device is a PX12-400r with most recent firmware.

  
  

• adding additional hard drive

  I've added some Rams, dvd player and hard drive on my desktop pc HP Pavilion P7-1235.

  All have been recognized "Rams, dvd and HDD player" in office management.

  My problem is that I can't access the new disc hard second "seagate barracuda 1 TB" because it does not show on my computer page.

  The new dvd player is there but not the hard drive.

  Q What should I do to access this new second hard drive.

  Access the "computer management / Disk Management Console" and initialize the disk. See http://www.brighthub.com/computing/hardware/articles/22069.aspx for more information, if necessary.

  Please send Bravo

• Pavilion P6-2125 - adding additional hard disks

  Nice day.

  Can I add additional hard disks SATA internal? Is the power supply sufficient to allow this? In addition, this will void the warranty?

  Thank you, Joe

  Hi, Joe:

  When I look at the upgrade and maintenance of your PC guide, I don't get a hard drive Bay.

  So, I would say that your PC is not configured to handle more than one hard drive.

  http://h10032.www1.HP.com/CTG/manual/c03030603.PDF

  Paul