Error in adding an iSCSI LUN - use software iSCSI initiator...

Similar Questions

• Error of tunneling to ASA 5505 using "Software VPN Client"

  Here's my current network:

  

  I'm VPN tunnel in the ASA using the Cisco VPN Client software.

  Here is my config ASA config: http://pastebin.com/raw.php?i=ad6p1Zac

  Here's my entry for the VPN Client connection information:

  

  

  (Password: cisco)

  

  

  

  When I try to connect, I get the message error "the received HASH load cannot be verified.

  

  What is this error and how can I solve it?

  I think you need to enter this information in the fields of group authentiation:

  (Just below "Group authentication")

  Name: vpnclientgroup

  Password: [just what you entered as a pre shared key below]

  tunnel-group vpnclientgroup ipsec-attributes pre-shared-key *****

  After the establishmet tunnel you will get a password pop up, that you enter "David" and the associated password.

• problem adding new iSCSI LUN

  I hope it is easy.

  I currently have 5 ESX host 3.5 all attach to two LUNS on our Dell NAS of the same logic.

  I need to add a third storage pool, to which I will possibly migrate approximately 1/2 of my guests.

  I have created the LUN used management tools of equal sense to grant access to one of my hosts and I refreshed my adapter of storage iSCSI (software).

  I see in my tools of logical equality that my host is connected to the new LUN.

  However, the logic unit number does not appear in my hosts lists ties LUN (on the section of the Configuration tab storage card) and it does not appear when I try to add storage in the storage of the configuration page section.

  I tried to rebootiing the host, but has not made all the difference.

  I forget something obvious?

  Thank you

  .. .pjpg

  Have you checked your vmkernel newspaper to see if there is any useful messages?

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• iSCSI initiator error - cannot add target

  I am currently using a MD3000i in a test environment.

  The installation is very simple:

  The MD3000i is directly connected to a Windows Server 2003 (x 64 Enterprise edition).

  The management software is completely installed on this server. Only one controller is used to manage the PowerVault (partially managed)

  All default settings are used. I have configure the system according to the guide online "Board installation and configuring iSCSI" found on the installation CD.

  I get an error when configuring the Mirosoft iSCSI initiator. As soon as I try to add a port for iSCSI (iSCSI initiator properties panel-> discovery-> target portals tab), I get the following error message:

  "invalid sendtargets response text was detected.

  After accepting this error, the port is added to the list, but will not appear in the tab target, it is therefore impossible to connect to this port. The port of host iSCSI on the table and the address source on the server IP responds to ping without problem.

  At this point, I am only able to connect to the MD3000i with the out of band management and cannot access the storage in any way.

  Any help would be greatly appreciated

  Robert

  
  

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• _ ERROR 1402 could not open Key__ HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Run\OptionalComponents\MSFS__

  When I try to download the latest update to Adobe Reader, I get the following error message:

  ERROR 1402 could not open key
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Run\OptionalComponents\MSFS

  I searched this error on the Adobe Reader website and they said to uninstall the current version of Adobe Reader on my computer with the command install/uninstall via the control panel - I tried to do, but the I get the same error message when I try to uninstall my current version to reinstall.  I'm so caught up in a "catch 22".  I really need to know how to correct this error so that I can update/install this program.

  Thank you

  Sandi

  sandib5532,
  Try to use The Windows Installer Cleanup utility and see if it is able to remove your current version.  Alternatively, you can consult the Adobe removal instructions.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Migration of the iscsi initiator software to hardware initiator on 2012 Hyper-v cluster.

  Hello

  We have 10 blades x M620 with Broadcom 10gig 57810 M1000e CMC card dedicated for iSCSI Equallogic PS 6110 San.

  Currently software used on cluster hyper-v Windows 2012 connect SAN PS6110 iscsi initiator.

  150 VMS are in production on 15 CSVs.

  We want to change the initiator of the software to the hardware on all our existing blades without CSV output.

  Is it possible on hyper-v cluster 2012 to have 5 blades with initiator software and remaining 5 blades with hardware initiator with same CSV cluster?

  If coexistence of initiator software and material as possible through hosting then I can apply this change a bit on our 10 blades without cluster downtime.

  Hello

  What version of FW EQL do you use?

  Yes, it is possible, however a couple of updates warn first.

  1.) install the latest firmware / boot code and driver for Broadcom cards.

  2.) put the node into maint mode then you can disconnect the SW iSCSI provenance and sign in using the HW iSCSI adapter.

  3.) do not try to do it with an active node / online.

  The advantage of the HW iSCSI adapter reduces the CPU Overload, if you are maxing out the CPU not now, do not expect a large increase in performance after HW iSCSI card.

  Kind regards

• Strange error when adding constraints

  Hi friends

  We are oracle runing 11.2.0.3.0, windows server.

  Only we don't have any problems on the 'source' scheme, which has been exported and imported to a new schema using DataPump and remap_schema. The same error occurs when using exp.exe

  Gives this error when adding some constraints, but not all, the Oracle returns a failure statemente:

  ORA-31685:object REF_CONSTRAINT type: NEW_SCHEMA. NOTE_ITEM_FK failed due to insufficient privileges. In the absence of sql is:

  ALTER TABLE NEW_SCHEMA. NOTE_ITEM_FINAL ADD CONSTRAINT NOTE_ITEM_FK FOREIGN KEY (CODID) REFERENCES NOTE ENABLE (ID)

  But I'm the owner of the table user, I DBA and all other privileges. We often but suddenly got this erros.

  Any idea?

  I have REFERENCES of the concession and many other roles and privileges at the trial, but nothing has worked.

  If I run the command via SQLPlus it returns me

  ORA-00604: an error occurred at recursive SQL level 1

  ORA-01031: insufficient privileges

  But I'm not referring to any other table schema, just mine.

  TKS a lot

  Well

  I found a solution

  RENAME TABLE to aaa_bkp aaa

  CREATE TABLE AS SELECT aaa * of aaa_bkp

  Re-create all triggers and constraints.

  It is, I think it was a good work around

  TKS all

• Error occurred when parsing the plug-in software

  I'm upgrading to 11g 11.1.0.1.0 Cloud control grid control 12.1.0.3.0 using 1-system approach. And I patched to the pre-upgrade console.

  After that I downloaded all the agents and plugins form upgrade to Oracle Enterprise Manager Cloud control 12.1 & lt; / title & gt; & lt; meta name = & quot; Title & quot; content = & quot; Upgra...

  When I try to validate the software, you can validate only agents, for the plugins, it displays:

  I use the root user, and zip files are all 777, unzip it works, I can see the plugin_bin file in my directory, but it is empty

  Thanks for any help!

  Error occurred when parsing the plug-in software. Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.em.smss_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.5.0_oracle.sysman.db_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.emrep_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.csa_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.beacon_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.5.0_oracle.sysman.emas_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.oh_2000_0.zip

  Hello

  Please note the plugin software used in the upgrade page 12 c Console is different from the one used during the upgrade of the WHO, so please make sure that the correct software is used

  1. navigate to the following location, where the binaries of software are installed and verify the plugin .opar file listed in the error message:

  $ cd <12c_OMS_HOME>/sysman/install/undeployed_plugins

  If available, copy them to a location that is accessible.

  2. If the plugin Internet files do not exist in the 12 c SGD Oracle Home, then download and stage the agent and software plugins correctly in the intermediate directory from the following URL.

  http://www.Oracle.com/technetwork/OEM/grid-control/downloads/OEM-upgrade-console-502238.html

  After you download the software and verify that the intermediate directory is properly referenced, run again the validation of the software.

  Check also the steps are as

  EM 12: the upgrade of the 11.1.0.1 Enterprise Manager on Linux x86_64 to 12.1.0.1 with method 1-System (Doc ID 1364931.1)

  Kind regards

  Rahul

• iSCSI Initiator Port Group error

  Problem adding in the vmk second to an existing iSCSI vSwitch.  Original config was 2 vmks - all worked successfully.  1 vmk has been removed to solve network problems.

  Re-created the 2nd vmk, but when going down one of the cards the unused category as soon as active network OK is selected the message "this vmkernel port group contains a NETWORK card.

  which is related to an iSCSI initiator.  Change its settings could disrupt the connection to the iSCSI data store"is displayed.  The response options are Yes or no.  A screenshot is attached.

  vCenter is version 5.0 U1b.  The host is ESXi5.0 U2 and mode of maintenance with none of the guests.  The host on the local disk not stop SAN.  I can safely click Yes, then go back and

  move the vmnic or is there a better way to fix this problem.  Thank you.

  Thanks for sharing the information. Please try below steps:

  Step 1. Remove links in the existing port and reboot the host.

  Step 2. Change the port iSCSI and vmnic preferred value to active group and move the second unused NETWORK card.

  Step 3. Change group 2-port iSCSI and vmnic preferred value in the active State and move the other card unused NETWORK.

  Step 4. Add vmk1 and vmk2 under links in the port iScsi initiator network configuration.

  I hope steps above will help to solve the problem. If you encounter the error even if you please let me know.

• Microsoft iSCSI Initiator with MPIO software

  Use the Microsoft MPIO Software iSCSI initiator installed from an OS supported by VMware guest? Can you tell me analysis that supports this or not?

  Setup would be:

  (1) FAS of NetApp with two Ethernet ports, two IP addresses and two VLANS

  (2) guest operating system (2000, 2003, 2008) with the Microsoft iSCSI initiator installed/enabled and configured for failover or MPIO load balancing

  (3) don't know how to put in place the ESX network, either:

  (i) two physical ESX NIC physical, connected to two different physical switches and two vSwitches, each physical NETWORK adapter on the VLANS separated mentioned in point (1). Guest operating system with two network cards for, each vNIC connected to the separate vSwitches - MPIO configured to load balance/failover.

  (II) active/passive team ESX physical NIC (not the choice here for active/active), connected to a unique vSwitch, both VLAN present at vSwitch. Guest operating system with two network adapters, each vNIC connected to the separate vSwitches - MPIO provisions set up two paths to the storage.

  Other ideas would be appreciated, thanks.

  Hi Tao2,

  Welcome to the forum.

  NetApp site information: "MPIO is not supported in a guest OS." ( http://now.netapp.com/NOW/knowledge/docs/snapdrive/relsnap62/html/software/admin/GUID-5341E2D6-4BFD-41E1-8AAE-0D643D2596EC.html ).

  Most of the time, we ensure the redundancy of storage iSCSI network through the VMware network design:

  • a vNic dedicated for storing the virtual machine

  • vNic attached to a vSwitch with two physical in failover mode maps

  It may be useful

  Concerning

  Franck

• 'CREATE JAVA' error: ORA-29506: derived from the USING clause invalid query

  Hello
  
  I created a table with the following attributes:
  
  name varchar2 (200);
  LOB_DATA blob
  
  
  I loaded a java source file in the lob_data blob.
  
  I then called the SQL:
  
  create or replace and compile the java source named "RemoteCommand" using blob
  Select lob_data from str_blob_table where name = 'RemoteCommand.java ';
  
  and I get the error:
  
  ORA-29506: invalid query from the USING clause
  ORA-00936: lack of expression
  29506 00000 - "query invalid derived from USING clause.
  * Cause: The USING clause does not form a valid query.
  * Action: Correct the USING clause.
  
  
  
  If I simply copy and paste the query part of the USING clause:
  
  Select lob_data from str_blob_table where name = 'RemoteCommand.java ';
  
  I get a valid result in SQLDeveloper.
  
  
  Any thoughts on what is happening here?
  
  A few notes:
  1. it is a 8i database.
  2. it works very well on a 9i database, but according to the SQL reference for 8i, it should work as well.
  
  Thank you
  Brent

  Try to delete "select" in the USING clause, that is to say change the SELECT BLOB SUPPORT... for BLOB to HELP... The original form of the syntax of JAVA to CREATE did not expect the SELECT token must be explicitly provided. Somewhere between 8i and 9i the parser was changed to try the provided text as well as what, with SELECT prefixed. So a CREATE JAVA statement you tried working in 9i but in 8i fails because SELECT would always be added before you try using the clause as a query, resulting a SELECT duplicate token.

• Error message "Key not valid for use in the State specified."

  Since July, after my update to Firefox, I get the above error message whenever I try to update software. It is a message when I try to Java or iTunes. I offered to watch my RSA folder in the computer and it seems that the files of majority in this file are 'old data Firefox '.

  The old Firefox data files are generated every time that reset you Firefox. This is done from about: support page, the Firefox menu or if you start Firefox in Mode safe mode, then select to reboot/reset.
  Error, when searched seems to apply to a Windows security update. I have not seen that it comes before Firefox.

• 404 not found error was encountered while trying to use an ErrorDocument directive to manage demand

  When I try to go to my site, I get a blank screen and this message:

  Method not implemented

  GET to / not supported.

  Additionally, a 404 not found error was encountered while trying to use an ErrorDocument directive to manage demand.

  Can someone help me fix this bug, please? Thank you!

  This problem may be caused by corrupted cookies or cookies that are blocked (check the permissions on the subject: permissions page).

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Please upgrade to the current version of Firefox 30.

  • Firefox > topic

  The version of Firefox you are currently running is no longer supported with security updates.

  • It is important to update Firefox and Add-ons to the latest version to get all security patches.

  You can find the full version of the current version of Firefox 30.0 in all languages and for all systems operating here:

  • http://www.Mozilla.org/en-us/Firefox/all.html

• After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  If you see the lock of Activation screen after update your iOS device, you want to try the following:

  -Restart your iOS device and try to connect again.

  -Visit appleid.apple.com and log in to ensure that your password is correct.  If you change something here, only to change your password.  Try to connect again on the iPhone.

  -Connect on iTunes on a computer and put your Apple ID and password when it prompts you (as it did on your iOS device).

  -ICloud.com check in the settings.  If you see your iOS device listed, remove account (do not erase or hit lost mode). Restart your device and try to reconfigure.

  -These measures should solve most of the problems.  For someone else, you will need to contact Apple (1-800-MY-APPLE or getsupport.apple.com).

  I hope that helps!