Adding an image of painting in Photoshop

Similar Questions

• When should I use Paint on Photoshop?

  Most recent IM for Photoshop so it's easier for me to throw my images in Paint to resize and crop.

  I was curious, if other members of the community never use Microsoft Paint for tasks and if so what?

  In addition, should I do this or would it benefit me to use Photoshop for resizing and cropping of images?  I intend using Photoshop, but I rarely have it open since I mostly use development within the CS5 programs and there are orders of magnitude more time to open Photoshop painting.  But even with a Fireworks image and running attended Fireworks I still through my image in paint because it seems faster.  Am I stupid? Should I give up painting? Some shortcut keys for this task would be probably better ahhhh... any idea?

  Thank you

  I don't think I've used MS Paint, since on Windows 2.0. I didn't even know it was still there.

  I just use PS for everything, except JPEG, with butt header information, the PS does not open. Then I just use ThumbsPlus, or IrfanView, open, and then save it with the appropriate header information.

  I did all the data on the algorithms of scaling (resizing) in the paint, but would think that PS would be better. They offer a good range of choice, but perhaps only a similar painting? Even when cropping. What part of these operations do you find easier in the paint?

  If I use PS a lot and have for a long time, image editing software is just a tool in a process. Using the appropriate tool, or that the artist is no longer at ease, is the trick. I use the (now Corel) painter for a large number of treatments, but almost always end up in PS. Over the decades, PS became closest to painter, as in days past. Yet, there are treatments that I want to apply to the painter, and some of those choices will be my personal comfort level. I have something very similar to my most recent PS, but if I know that each step by heart in painter, my comfort level increases.

  Use what you like for different operations, but I have a Visual control with surgery, as the scale/resize. Do the same exact operation of each program, using the same base Image and the same exact settings. Compare the results of two critical programs.

  Good luck

  Hunt

• I added an image as a signature that works very well if a new message an email, however, the signature of the image is not added when I reply to an e-mail message?

  I added an image as a signature when a set my e-mail account. This image is added successfully when I compose a new email. When I reply to an e-mail message, the image is not added, and I have to manually copy it from a newly formed email. I assumed that there should be a way around this?

  Account settings of GOTO and look under the section Composition & addressing. There are two check boxes to include signatures in the responses and transfers.

• When I try to record something, it tells me there is not enough memory, or when I change an image in paint. yet my reader/c is not even half full.

  Original title: Windows Vista / on my computer HP laptop G60 gives me a hard time

  When I try to record something, it tells me there is not enough memory, or when I change an image in paint. yet my reader/c is not even half full.  I also noticed that it is said that I have a recovery disk, which seems to be to store all my stuff instead of my main drive, why you get, and how can I fix this problem?

  Hi Shirleysilva,

  Run the disk cleanup utility to remove unnecessary files from your system and then check if it helps. Disk Cleanup helps your computer run faster. It removes temporary files, empty the Recycle Bin, and removes a variety of file system and other items that you no longer need.

  To delete files using disk cleanup, follow the steps below:

  a. open Disk Cleanup by clicking the Start button, all programs, Accessories, clicking System Toolsand then click on Disk Cleanup.

  b. in the Disk Cleanup Options dialog box, choose whether you want to clean your own files only or all files on the computer.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. If the Disk Cleanup: drive selection dialog box appears, select the hard disk you want to clean, and then click OK.

  d. click the Disk Cleanup tab and select the check boxes for files that you want to remove.

  e. When you are finished selecting the files you want to delete, click OK and then click on delete files to confirm the operation. Disk Cleanup on delete all unnecessary files from your computer.

  Check out the link for more details below:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  I hope this helps!

• Unable to access filter of the same oil painting with Photoshop CC update (2015.1.2) today

  Unable to access filter of the same oil painting with Photoshop CC update (2015.1.2) today

  Hi nevans,.

  Please see the oil painting is gray

  Note that your graphics card must support OpenCL 1.1 or later and must be greater than clgpu OpenCL scores [0]. CLBandwidth = 1.2e + 10 and clgpu [0]. CLCompute = 5.0.

  Kind regards

  Assani

• Edit an image from lightroom to photoshop... Image does not open.

  When I want to edit an image from Lightroom to Photoshop (CC), Photoshop opens, but the image does not work. However, I am still able to do with some images, but some images are simply no opening. This is the time of fisrt I have this problem.

  
  

  My version of photoshop is CS5 extended.

  
  

  I have Lightroom 6.0.

  
  

  I'm with P.C.

  
  

  Thank you
  

  Photoshop Cs5 will not open images Nikon D750

  You must use the version of Photoshop cs6/CC or DNG converter to be able to view these images in Photoshop cs5 in DNG

  Download DNG Converter:-Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.2

  Concerning

  Assani

• I just thought that I added 8 images to my library and it turns a license all. Very delicate! so bummed that I have there is one I want to use and 8 of my images! Can I please everything reset and start over? All new, so this summer

  I just thought that I added 8 images to my library and it turns a license all. Very delicate! so bummed that I have there is one I want to use and 8 of my images! Can I please everything reset and start over? All new, so this was a first time horrible user experience!

  Hello

  I'm afraid, it is not possible to reset anything, once an image has been authorized.  As a gesture of goodwill, I added 7 license credits to your account to replace those allowed by mistake.

  Thank you

  Bev

• Mixture of painting in photoshop

  Hello

  I'm having a problem of mixture of painting in photoshop; the colors just blend when I put one on the other.

  This isn't a problem, I've had previously, and there is no need to use the mixture or blur tool or a need to change the normal setting for the layers. It does not appear the same as the original, even by using these tools.

  Anyone know what could be the problem?

  Thank you very much!

  Normally, you use a low opacity brush and perhaps a low flow brush to build the color gradually and mix better.

  

• How can I convert RAW images to JPEG with Photoshop CS5.1 or CS5.1 bridge or Lightroom 3?

  How can I convert RAW images to JPEG with Photoshop CS5.1 or CS5.1 bridge or Lightroom 3?

  You can use the procession of images of PS or bridge. Or you can use Save as in camera raw.

• What happened to the oil filter paint in photoshop cc? updated and go

  What happened to the oil filter paint in photoshop cc? updated and go

  It has been deleted in 2014 CC and later. If you keep the CC, you can always use it.

• Black paint in Photoshop when I do not use black?

  Good then it's just started yesterday. I was painting in photoshop and beginning to color what I drew, but for some reason any, he started black paint in the color I use. I have no idea why he did this. I do everything in separate layers and I had no more to whether black color even as you can see in the picture below. I use a wacom tablet, but I don't think he does it because of that. I just tested this theory by using my classic mouse, and he continues to paint black. I must add, is not all that is painted black, it's just some parts. Also, I use PS cs6. Someone knows how can I fix?

  Take a look at the brush mode in the Options bar

  [EDIT]  Just to add that if you tried painting outside the beige color, I think you would have guessed right away that it was a problem of mixing mode.

• Photo Gallery can reorganize in subcategories + added new images through editing in the browser

  Hello

  I'm looking for a photo gallery that has the ability to rearrange the images displayed from the subcategories or tags. For example, I want to add a gallery which contains pictures, a projects of clients. The client wants to visitors of the site to be able to mix the Gallery to display only e.g. 'stone walls' or 'wood decking. A system of marking would be useful rather than having to load the pictures in each subcategory.

  The other consideration is that my client should be able to add new images with labels using the browser via Business Catalyst. So far, I've only managed by replacing the existing images rather than adding new images.

  Y at - it such widget for Muse or is there any other widgets wordp interested or another that could be incorporated into the work dot.

  Thanks in advance,

  Jimmy

  Hi Jimmy

  If I'm not mistaken, basically you want to provide users an option to select the category of images as they appear on the page.

  Muse, we cannot tag or categorize, also the module of British Colombia Photo Gallery does not provide this option, but there is a solution with web applications.

  You can create a web application and web then elements app in the form of images and then rank them. When page inserting the web application with the categories drop down, so when users select the category these items in web application would show on the page. In addition, you can add custom Web app fields to search using the keyword.

  With the edition, customers can connect to BC admin, then using the photo gallery or web app (if used) module to edit images, add new ones. IBE cannot be used to add new ones, but to replace existing ones.

  Useful links:

  http://helpx.Adobe.com/business-catalyst/partner/Web-apps.html

  http://helpx.Adobe.com/business-catalyst/partner/building-Web-apps-part-1.html

  Thank you

  Sanjit

• Adding an image at the signing, but not in the signature field, in Reader

  Hello

  I would like to know if it is possible to add an image to a PDF when I sign the document in the reader.

  I don't want to add the image in the signature field as a signature, but rather under the signature field. The image is ' n barcode provide me with more information about the signature.

  I looked at the example Stamper, but this feature is not avialable in Reader.

  Thank you

  Magda

  PDPageAddAnnot works on compatible reader of PDF files.  Otherwise, Yes, you need Cos.

  From: Adobe Forums [email protected]<>[email protected]>

  Reply-To: "[email protected]<>[email protected]> ' [email protected]<>[email protected]>" "

  Date: Thu, October 27, 2011 00:56:18-0700

  To: Leonard Rosenthol [email protected]<>[email protected]>

  Subject: Adding an image in the reader at the signing, but not in the signature field,

  Re: Adding an image in the reader at the signing, but not in the signature field,

  created by magdakuithttp://forums.adobe.com/people/magdakuit> in Acrobat SDK - see the discussion complete onhttp://forums.adobe.com/message/3992749#3992749

• Size of the image in Illustrator to Photoshop

  I'm new to Illustrator and can only be overlooking something here, but here's my background and the question:

  I took a screenshot of an image and open in Photoshop CS3. I've clipped a part I want to use and save the file as a .eps file and open it with Illustrator. In Illustrator, I recreate the image at the same size as the image I opened (I look at the two images to 100% view). I save my new image in .eps format, and then open it with Photoshop. For some reason, the image is about 50% bigger in Photoshop that was in Illustrator. Any ideas? A percentage of 100% look at a watch not really the right size of the image? Or is the problem lies with how Photoshop CS3 interprets a file .eps Illustrator CS4?

  Thanks in advance for any information or advice.

  You've discovered just resolution image and its effect on the display of the pixel based images.

  In Illustrator, there is no resolution. Objects have a set size and Illy requires a screen resolution of 72 dpi as a basis for hypotheses on the display of graphics as well as for its calculations of this 100%.

  Then export to pixel based on the file formats, you can choose the resolution.

  In Photoshop, the '100% ' has nothing to do with the actual size of things (as defined in Illustrator) but means that one pixel of the image is a pixel of your screen.

  When you open an EPS, you get a dialog box in which specify you how to photoshop must calculate the pixels of the vector and the desired resolution. When you go to 72 dpi, you should get the size you expect. But that won't be enough to print.

  BTW: the workflow to do a screen capture and convert your image here and there may be harmful for printing results.

• Painting in photoshop

  I'm a bit new to photoshop so sorry if it's confusing.

  I was watching a video tutorial on digital painting in photoshop and I'm confused about something. When the instructor is about to add highlights or shadows in an area that already has a flat color set, it selects the flat area with the lasso too. Then he did something to erase the "mobile dash", but is still able to paint only in the originally selected area with the Brush tool. What does do to erase the "ants", but maintain the selection? Hope that isn't too complicated.

  Thank you.

  Probably, he presses Cmd + H.

  Press again to display the selection border.