Adding another target iscsi
Hello
One of our hosts running 3.01, currently on an iSCSi SAN Netapp. We have deployed just a Compellent SAN, how do I add a new ISCSi target? In the dynamic discovery tab of the initiator, I added the server (and port 3260), but also add known as iqn on the general tab? The reason why I ask this before I try it is I don't ' want to lose the connection in progress, and I'm afraid to hit set up under the general tab and entering the new iqn name could remove it.
Thanks in advance,
After the target storage has been added via Discovery dynamic all LUNS presented to the esx host must be visible in the sight of devices for the software iscsi adapter. He will go through the process of a new analysis of the storage adapter to recognize the new storage and should not cause problems with the currently connected storage.
Tags: VMware
Similar Questions
-
I'm unable to download the updates for Adobe reader 10.1.1 victory win 7 claims I am connected as a guest when I am the administrator. disabled UAC and added another user still cannot update.
Original title: win 7 claims I am logged in as a guest when I am the administrator. disabled UAC and added another user still cannot update.
Here's how you can find your status:
1. click on the globe to start, and then type the three letters cmd in the search box and press ENTER.2. Enter the following command and press ENTER:NET user "user %%nom.What do you see under "a Local group memberships? -
data stores configuration and target iSCSI in VMware 5.5U1
I work inside my lab at home where I have the configuration box a CentOS 6.5 to serve to an iSCSI target. Shows the current configuration:
[root@localhost ~] # tgtadm - lld iscsi - op show - target mode
Target 1: iqn.2012 - 10 .cpd .net: san.target01
System information:
Pilot: iscsi
Status: ready
I_T nexus information:
Information about the LUN:
LUN: 0
Type: controller
SCSI ID: EIT 00010000
SCSI SN: beaf10
Size: 0 MB, size of blocks: 1
Online: Yes
Removable media: no
Prohibit deletion: No.
ReadOnly: No.
Type of backup store: null
Path to store backup: no
Flags of magazine rack:
MON: 1
Type: disc
SCSI ID: EIT 00010001
SCSI SN: beaf11
Size: 268435 MB, block size: 512
Online: Yes
Removable media: no
Prohibit deletion: No.
ReadOnly: No.
Type of backup store: rdwr
Support store path: / dev/sdc
Flags of magazine rack:
Account information:
ACL information:
192.168.1.200
192.168.1.201
Initially, I had only a single device defined within the iqn.2012 - 10 .cpd .net: san.target01 and I was able to create a data store on the ESXi hosts that I have running in my lab. I then added a second disk (LUN 1 above), but I still show that the possibility of having the original data store. When I look at the "storage adapters" on another host, details the software iSCSI card show 1 target connected, 2 devices and 2-way. If I should not be able to mount MON 1 as a second data within the host store?
I don't use iSCSI anywhere in production and only play with it so that I can familiarize myself with the portion of iSCSI for test VCP5-VTC. Any help would be greatly appreciated. Thank you.
Has proved to be a problem with tgtd. I actually had to reboot the server to get exports to work properly - the normal command "tgtd restart service" has been leaving some kind of autour artifacts that prevented VMware to see the changes properly.
-
I share the same target iSCSI with multiple hosts?
I have an iSCSI LUN target that appears when I discovered the storage for an ESXi host, but when I discovered the storage for another host, it does not appear. I added the suitable adapter software network and iSCSI on the second host, dynamic analysis and he sees the same iSCSI target, however when I go to 'Add a storage' there is no displayed LUN.
I'm obviously missing something, I just can't understand what it is.
Any help would be greatly appreciated!
Storage Area Network - FC and iSCSI - do not automatically appear LUN to all hosts that connect to them. This is also called masking and prevents accidental access to LUNS of the host that is not allowed access to that LUN. You must configure the storage system, access to the LUN - once you do this for the other hosts will be displayed in the list and you will be able to access all hosts logic unit number.
To avoid trampling of the ESXi put a lock on the VMDK so that a subsequent host will not be able to power of the virtual machine and write than disj virtuak
-
HI -.
I am looking for help to point me in the right direction. This problem occurred after a reboot of the system.
I'm in vmware esxi essentials 5.0.0 821926
I use the starwind software as my iSCSI target
I use ISCSI to connect to my server from storage to the esxi hosts.
I have 2 warehouses of data showing inactive under clusters of data storage and the data store. I have a third-party data store on the same server that is loading properly.
I currently have the same behavior on three esxi hosts:
under configuration - storage adapters is the ISCSI path is active. Data warehouses appear under devices and mounted. In data warehouses, they are inactive. On the same storage server
on the starwind Server - I have
built a new target
removed and added the databases to the new target
Changed the IP address of the target.
On Esxi hosts, I removed the ISCSI server, discover places BOF dynamic and static and added under the same or IPs news discovery
I can restart esxi hosts & storage servers and get to that same point.
Whenever I find myself in the same place - course assets, devices mounted, inactive in data warehouses
I don't know what else to share, let me know what you need to know to help out me.
Thank you
Dylan
OK, incase someone crosses my ramblings, it may help. My original question was warehouses of data that would not rise. They were visible as devices in the area of storage under devices and as devices in the scsi adapter.
When I would try to force mount them, add storage, keep the signature, mount they wouldn't mount. I did some research and my question was after a failed mount attempt strength as got data attached as snapshots warehouses. I then mounted force them and he tells will data warehouses and I got them back.
I followed this KB to identify and resolve the problem
manipulation of vSphere detected as snapshot LUN LUN (1011387)
When it was over, I tried to add vms back and found a new show. Power of vms would expire. the vmkernel.log showed;
2014 05-27 T 07: 20:40.010Z [verbose 'Vmsvc' 564D7B90] Vmsvc: filtering Vms: ignored not ready to request power state vm vim. VirtualMachine:75
AND
(2014 05-27 T 03: 45:47.821Z cpu4:2052) NMP: nmp_PathDetermineFailure:2084: SCSI cmd RESERVE failed on the vmhba35:C0:T1:L0 path, booking on eui.cff548d1952b1e4c of device status is unknown.
I had latency huge read write showing upwards, 3K and more
After several searches, I had in the ESXShell and found that there is no conflict of booking.
On a whim, I took inventory all virtual machines that are now inaccessible. I then added a DOS virtual machine. Alto! the latency down to version 1.2 a.7 ms for all data warehouses.
ultimately the instructions said you may need to add virtual machines in the inventory, but does not remove all virtual machines first. I was grabbing vms that were not in stock, so I didn't remove the old virtual machines in the inventory.
A recruit Mennonites, Yes.
-
How to choose IMAP or POP, when adding another email account
Recently, I wanted to add another (IMAP) e-mail account in the mail. I opened the mail, choose Add account in Messaging menu and then a different e-mail account. In earlier versions of the mail, you can choose the type of account in the first step, but in version 9.3 (3124) you are prompted to type only the username, your email address and your password. If you then click Next, mail adds an account without having to ask for the account type. In my case the added mail always one account pop. I couldn't change the account type in the account properties. The field for the incoming mail server shows gray the pop mail server. The only way to add an IMAP account type in incorrect parameters in the first step. Then, a window opens where I could type in the incoming and outgoing mail server settings. Same behavior on my iPhone with iOS 9.3.2 5s (13F69).
Best regards Lutz
Well at some point you can hold down the option key after completing the first screen and then press the continue Option, but it seems that no longer works.
So now, when you add a new account, put in incorrect information in the user name or password, or both. Which will cause a failure and make up the most advanced screen, where you can choose the type of account that you are interested in.
-
error of target iSCSI initiator 0xEFFF0012
After upgrade to windows Server 2003 enterprise x 86 to windows Server 2008 Server Enterprise x 86, the SCSI initiator gives me error of target, the event viewer here is the increases to warning:
«Discovery iSCSI via SendTargets failed with error 0xefff0012 for target portal code * 192.168.130.1 0003260 Root\UNKNOWN\0000_0.»Please help and advice.
Concerning
Hello
Because the problem is with windows server 2008, I suggest you post this question in the Windows Server forum.
http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
-
PERC H330 and Raid 5, try adding another SATA drive raid 5 array
Hi all
I have one server PowerEdge T330 with 8 slots of disc and have currently 3 SATA drives running a raid 5 configuration. I have a virtual disk configured for Raid (must).
The operating system recognizes the disk and is able to use the resources...
My desire is to add another hard drive to the table (hard disks of the same size, same brand, etc.) with 4 disks without losing any data.
I looked in the settings of the iDrac and the only adjustment was to add the new disk as a global hot spare or a hot spare dedicated to the virtual drive.
I also looked in the BIOS and do not see a way to add the new drive.
Does anyone know how to increase capacity? I can blow the virtual drive if necessary and start over without problem. I intend to gradually accomplish this Act until adding 8 disks. (5 times).
Help!
Hello.
Management controllers RAID and tables is not made in the BIOS iDRAC or systems. For the management of the RAID (virtual disks) arrays, you have OpenManage Server Administrator (OMSA). If not installed, see the link: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=TK61C once installed, go to-> Storage->-> H330 PERC controllers-> virtual disk--> sub tasks available-> select reconfigure and run-> then check a box to add the fourth disk on the next page. Follow the prompts and allows you to extend your range of RAID 5.
-
How to add more target iSCSI with static discovery
Try to add multiple entries of static discovery for a set of hosts in the cluster. I can add the first entry by running the following PowerCLI
Get-vmhost 'vdi1.vdi.sf.local ' | Get-VMHostHba-Type iScsi. New-IScsiHbaTarget-address '172.27.32.30' nomiscsi - iqn.2010 - 01.com.solidfire:bbup.desktop01.2514 - ChapName VDI-desktop computers - ChapPassword j0iT18i17Vp4su > r ChapType - required - static type
However, whenever I try to add the following entries to static discovery (I have 22 to add to the same discovery IP address) I get the following error message:
New-IScsiHbaTarget: 27/10/2014-09:17:28 new-IScsiHbaTarget the specified target
'172.27.32.30:3260' already exists.
On line: 1 char: 62
+ get-vmhost 'vdi1.vdi.sf.local ' | Get-VMHostHba-Type iScsi. New-IScsiHbaTarget...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: InvalidArgument: (:)) [new IScsiHbaTarget], VimException)
+ FullyQualifiedErrorId: Client20_StorageServiceImpl_TryValidateUniqueIScisTargetAddress_NonU
niqueAddress, VMware.VimAutomation.ViCore.Cmdlets.Commands.Host.Storage.NewIScsiHbaTarget
Can I add multiple static targets to a single iSCSI server IP address just right with esxcli, but I'd rather this fact directly in PowerCLI without using $esxcli if possible.
the discovery of iscsi adapter statictarget esxcli add - a vmhba38 - a 172.27.32.30:3260 - n iqn.2010 - 01.com.solidfire:bbup.desktop01.2514
esxcli iscsi Portal adapter defined target - a vmhba38 - 172.27.32.30 auth chap d United-a-n VDI-Desktops - required l - n iqn.2010 - 01.com.solidfire:bbup.desktop01.2514 - S j0iT18i17Vp4su > r
the discovery of iscsi adapter statictarget esxcli add - a vmhba38 - a 172.27.32.30:3260 - n iqn.2010 - 01.com.solidfire:bbup.desktop02.2515
esxcli iscsi Portal adapter defined target - a vmhba38 - 172.27.32.30 auth chap d United-a-n VDI-Desktops - required l - n iqn.2010 - 01.com.solidfire:bbup.desktop02.2515 - S j0iT18i17Vp4su > r
I must be missing something simple. Any help is very appreciated.
As far as I know, it is not possible with the current construction of PowerCLI to set several iScsiNames on the same target.
You use the $esxcli I'm afraid.
-
Aloha kakou - from now on, I have an iSCSI SAN (98.x) connected to my cluster. I need to add another connection to a second SAN (99.x). The only difference (at least for now), 99.x will be given LUN only (access via iSCSI initiator within the virtual machine) and 98.x has VM LUN and data.
To do this - even if it's just data, the structure of 99.x vSwitch must be identical to 98.x (they have the same components)?
Mahalo, Bill
That's right, because communication iSCSI occurs between the o/s VM and iSCSI SAN - the Service Console/VMkernel port does not - this should answer any questions http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1010547
If you find this or any other answer useful please consider awarding points marking the answer correct or useful
-
Unable to connect to target iSCSI for ESX 3.5
Hi all
I have an esx 3.5 build 82663 (update 1). We took over this company, so we are migrating this data center. I understand tha patch isn't 5 update but it wasn't our environment and we try to turn it on.
We have three esx servers
(1) console production svc - 192.168.7.x
(2) storage network - 192.168.9.x
EqualLogic 3)-192.168.9.x
(4) storage Switch - CISCO 3750 Switch
(5) frames enabled on vswitch, vmknic, physical, switch, network interface cards, table vlan and storage.
(6) software iscsi client allowed an outgoing connection through 3260 (tcp)
Performed troubleshooting
esxcfg-vmknic - l - seems ok and with activated jumbo frames
esxcfg-NICS - l - looks ok with activated jumbo frames
esxcfg-vswitch - l - looks ok with activated jumbo frames
esxcfg-road - l - (looks good)
192.168.7.0 255.255.255.0 local subnet
192.168.9.0 255.255.255.0 local subnet
by default 0.0.0.0 192.168.7.1
Works of vmkping between the storage network interfaces (192.168.7.x) i.e. physical switch, equallogic, and other interfaces for esx storage network.
vmkping s 9000 192.168.9.11 (equallogic san) works without packet loss.
Ping does not work between interfaces.
Ping of physical switch to the san and esx equallogic storage network interfaces work
Access to LUNS equallogic shared among interfaces are restrticted by the ip address of storage network (192.168.9.x). The LUNS they check marks against them to have several initiators communicate with them.
No enabled chap authentication anywhere.
I had another server with the same configuration connection to it without problems to the only difference is esxi can be accessed and the esx servers cannot access.
Our environment has been only esxi. This is the first time I use esx and a system of update 1 for iSCSI.
I'm on the critical path to complete the project.
It would be useful that I can get all the help you can.
See you soon,.
Knockaert
If I'm not mistaken in your service console needed to have access to the storage network 3.5 too. Try to configure a second service on the storage network console and see if you can view the LUNS. Can also be useful to filter through the vmkernel logs and see if you notice any errors.
If you have found this device or any other useful post please consider the use of buttons useful/correct to award points
-
Reopening the thread - fusion even people per ID adding another scenario
ORACLE VERSION: Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit ProductionSame Question is Solved By Frank in Here -- Thank you for helping me
When Testing With real data i came Across another Scenario, which i think the persons should me merged together. i tried ti figure this my self , but this logic seems to be more complex. also sorry for posting this multiple times
/* Formatted on 7/25/2012 8:41:48 AM (QP5 v5.115.810.9015) */ WITH merge_names AS ( /*SELECT 9000 We_pid, 99980000 We_addr_id, 'ROBERT' first_name, 'JOHN' last_name, NULL middle_name, NULL Suffix FROM DUAL UNION ALL SELECT 9001 We_pid, 99980000 We_addr_id, 'ROBERT' first_name, 'JOHN' last_name, NULL middle_name, NULL Suffix FROM DUAL UNION ALL SELECT 9002 We_pid, 99980000 We_addr_id, 'ROBERT' first_name, 'JOHN' last_name, 'H' middle_name, NULL Suffix FROM DUAL UNION ALL SELECT 9003 We_pid, 99980000 We_addr_id, 'ROBERT' first_name, 'JOHN' last_name, 'H' middle_name, NULL Suffix FROM DUAL UNION ALL SELECT 1000 We_pid, 999898989 We_addr_id, 'DONALD' first_name, 'BOATRIGHT' last_name, 'L' middle_name, NULL Suffix FROM DUAL UNION ALL SELECT 1001 We_pid, 999898989 We_addr_id, 'DONALD' first_name, 'BOATRIGHT' last_name, 'LARRY' middle_name, NULL Suffix FROM DUAL UNION ALL SELECT 1002 We_pid, 999898989 We_addr_id, 'DONALD' first_name, 'BOATRIGHT' last_name, NULL middle_name, NULL Suffix FROM DUAL UNION ALL SELECT 33065 WE_PID, 99000000 We_addr_id, 'LUNA' First_name, 'JOSE' last_name, NULL middle_name, NULL suffix FROM DUAL UNION ALL SELECT 8450527 WE_PID_LINK, 99000000 We_addr_id, 'LUNA' First_name, 'JOSE' last_name, 'A' middle_name, NULL suffix FROM DUAL UNION ALL SELECT 373453429 WE_PID_LINK, 99000000 We_addr_id, 'LUNA' First_name, 'JOSE' last_name, NULL middle_name, NULL suffix FROM DUAL UNION ALL SELECT 442303062 WE_PID, 99000000 We_addr_id, 'LUNA' First_name, 'JOSE' last_name, 'S' middle_name, NULL suffix FROM DUAL UNION ALL SELECT 30088775765 WE_PID, 990000878 We_addr_id, 'BILL' last_name, 'RAY' first_name, 'M' middle_name, NULL SUFFIX FROM DUAL UNION ALL SELECT 30088775766 WE_PID, 990000878 We_addr_id, 'RAY' first_name, 'BILL' last_name, NULL middle_name, NULL SUFFIX FROM DUAL UNION ALL SELECT 30088775767 WE_PID, 990000878 We_addr_id, 'RAY' first_name, 'BILL' last_name, 'MAX' middle_name, NULL SUFFIX FROM DUAL UNION ALL SELECT 30088775768 WE_PID, 990000878 We_addr_id, 'RAY' first_name, 'BILL' last_name, 'MICHEL' middle_name, NULL SUffix FROM DUAL UNION ALL SELECT 399998776 WE_PID, 9901111 We_addr_id, 'ELLISON' first_name, 'LAWRANCE' last_name, NULL middle_name, NULL SUFFIX FROM DUAL UNION ALL SELECT 399998777 WE_PID, 9901111 We_addr_id, 'ELLISON' first_name, 'LAWRANCE' last_name, 'J' middle_name, 'JR' SUFFIX FROM DUAL UNION ALL SELECT 399998778 WE_PID, 9901111 We_addr_id, 'ELLISON' first_name, 'LAWRANCE' last_name, 'JAMES' middle_name, 'SR' SUFFIX FROM DUAL UNION ALL SELECT 399998779 WE_PID, 9901111 We_addr_id, 'ELLISON' first_name, 'LAWRANCE' last_name, 'JACK' middle_name, 'JR' SUFFIX FROM DUAL UNION ALL */ SELECT 4498 WE_PID, 77127945 We_addr_id, 'PIGGEE' first_name, 'AARON' last_name, NULL middle_name, NULL SUFFIX FROM DUAL UNION ALL SELECT 4499 WE_PID, 77127945 We_addr_id, 'PIGGEE' first_name, 'AARON' last_name, NULL middle_name, 'JR' SUFFIX FROM DUAL UNION ALL SELECT 4450 WE_PID, 77127945 We_addr_id, 'PIGGEE' first_name, 'AARON' last_name, NULL middle_name, 'JR' SUFFIX FROM DUAL UNION ALL SELECT 4451 WE_PID, 77127945 We_addr_id, 'PIGGEE' first_name, 'AARON' last_name, NULL middle_name, 'JR' SUFFIX FROM DUAL UNION ALL SELECT 250 WE_PID, 77127950 We_addr_id, 'RODNEY' first_name, 'MONTGOMERY' last_name, NULL middle_name, NULL SUFFIX FROM DUAL UNION ALL SELECT 251 WE_PID, 77127950 We_addr_id, 'RODNEY' first_name, 'MONTGOMERY' last_name, NULL middle_name, NULL SUFFIX FROM DUAL UNION ALL SELECT 252 WE_PID, 77127950 We_addr_id, 'RODNEY' first_name, 'MONTGOMERY' last_name, NULL middle_name, 'SR' SUFFIX FROM DUAL UNION ALL SELECT 253 WE_PID, 77127950 We_addr_id, 'RODNEY' first_name, 'MONTGOMERY' last_name, NULL middle_name, 'III' SUFFIX FROM DUAL), got_min_we_pid AS (SELECT b.we_pid, b.we_addr_id, b.last_name, b.first_name, b.middle_name, b.suffix, MIN(b.we_pid) OVER ( PARTITION BY b.first_name, b.last_name, b.middle_name, b.suffix ) AS min_we_pid FROM merge_names b), possible_matches AS ( SELECT CONNECT_BY_ROOT min_we_pid AS min_we_pid, min_we_pid AS leaf_we_pid FROM got_min_we_pid WHERE CONNECT_BY_ISLEAF = 1 START WITH we_pid = min_we_pid CONNECT BY first_name = PRIOR first_name AND we_addr_id = PRIOR we_addr_id AND last_name = PRIOR last_name AND SUBSTR ('x' || middle_name, 1, LENGTH ('x' || PRIOR middle_name)) = 'x' || PRIOR middle_name AND 'x' || middle_name > 'x' || PRIOR middle_name AND 'x' || suffix = 'x' || PRIOR suffix), got_match_cnt AS (SELECT DISTINCT min_we_pid, leaf_we_pid, COUNT (DISTINCT leaf_we_pid) OVER (PARTITION BY min_we_pid) AS match_cnt FROM possible_matches) SELECT DISTINCT we_pid, we_addr_id, first_name, last_name, middle_name, suffix -- ***** CHANGED ***** , MIN (we_pid) OVER (PARTITION BY NVL (p.leaf_we_pid, c.min_we_pid)) AS merge_wepid -- ***** CHANGED ***** FROM GOT_MIN_we_pid c LEFT OUTER JOIN got_match_cnt p ON p.min_we_pid = c.min_we_pid AND p.match_cnt = 1 ORDER BY c.we_pid, c.last_name, c.first_name, c.middle_name;
Published by: new learning on July 25, 2012 05:50o/p required for the person PIGGEE AARON JR and RODNEY MONTGOMERY ALl other Person Mergings Are working Great. WE_PID WE_ADDR_ID FIRST_NAME LAST_NAME MIDDLE_NAME SUFFIX MERGE_WEPID 4450 77127945 PIGGEE AARON JR 4498 4451 77127945 PIGGEE AARON JR 4498 4498 77127945 PIGGEE AARON 4498 4499 77127945 PIGGEE AARON JR 4498 250 77127950 RODNEY MONTGOMERY 250 251 77127950 RODNEY MONTGOMERY 250 252 77127950 RODNEY MONTGOMERY SR 252 253 77127950 RODNEY MONTGOMERY III 253
Published by: new learning on July 25, 2012 06:49
Published by: new learning on July 25, 2012 06:51Hello
This example gets the results you requested on the sample data you posted:
WITH got_min_we_pid AS ( SELECT merge_names.* , MIN (we_pid) OVER ( PARTITION BY first_name , last_name , middle_name , suffix ) AS min_we_pid FROM merge_names ) , possible_matches AS ( SELECT CONNECT_BY_ROOT min_we_pid AS min_we_pid , min_we_pid AS leaf_we_pid FROM got_min_we_pid WHERE CONNECT_BY_ISLEAF = 1 START WITH we_pid = min_we_pid CONNECT BY first_name = PRIOR first_name AND last_name = PRIOR last_name AND SUBSTR ( 'x' || middle_name , 1 , LENGTH ('x' || PRIOR middle_name) ) = 'x' || PRIOR middle_name AND 'x' || middle_name >= 'x' || PRIOR middle_name -- ***** CHANGED ***** AND ( 'x' || suffix = 'x' || PRIOR suffix -- ***** CHANGED ***** OR PRIOR suffix IS NULL -- ***** NEW ***** ) -- ***** NEW ***** AND ( 'x' || middle_name != 'x' || PRIOR middle_name -- ***** NEW ***** OR 'x' || suffix != 'x' || PRIOR suffix -- ***** NEW ***** ) -- ***** NEW ***** ) , got_match_cnt AS ( SELECT DISTINCT min_we_pid , leaf_we_pid , COUNT (DISTINCT leaf_we_pid) OVER (PARTITION BY min_we_pid) AS match_cnt FROM possible_matches ) SELECT we_pid, we_addr_id, first_name, last_name, middle_name, suffix , MIN (we_pid) OVER (PARTITION BY NVL (p.leaf_we_pid, c.min_we_pid)) AS merge_wepid FROM GOT_MIN_we_pid c LEFT OUTER JOIN got_match_cnt p ON p.min_we_pid = c.min_we_pid AND p.match_cnt = 1 ORDER BY c.last_name , c.first_name , c.middle_name ;
It will give the results you want in view of all the data of your table, or data that can be added to your table in the future? It depends on what you want. It is impossible to everything that publish you current data, and it is impossible to display all of the data that you can obtain in the future. The best is you specify exactly what you want. For example:
"I want to group the lines and assign the we_pid lowest in the group like the merge_we_pid for all members of the group. Every row belongs to a group exaclty. The following rules define what a group is:
(a) last_name, first_name, middle_name and suffix identical lines are always in the same group.
(b) the lines with different name or last_name are never in the same group.
(c) two lines with different middle_names and/or suffixes can be in the same group, subject to the following conditions
(c1) One of the lines must be 'more complete' than the other
(c2) If row is "less complete" that line B, then A must not be "less complete" any line C less than B or C is "less complete" than the other, whereby all 3 ranks fall in the same group.
Line A is considered to be "less full" line B if and only if
(1) A middle_name matches the beginning of B middle_name (first name of B can be longer), and
(2) if A suffix is not NULL, then B has the same suffix. »I think that the example above describes what you want now. I guess that a suffix simply cannot be less than a complete suffix; that would deal with "II" as a less complete form of 'III'
What you asked for in your previous thread differs only in the role of suffix. The query I posted yesterday treated suffix such as first and last name: it had to be exactly the same for all rows in the group, and suffix played no role in the condition (c) or the definition of the "complete".
In the above query, if CONNECT BY condition tests a child line is more comprehensive than its parent. In the version I posted today, I changed the CONNECT BY clause to match the new definition of the "complete". Obviously, there are requirement suffix had to change. Yesterday, the B line could be more complete that the line has only if its middle_name took longer; now, they can be the same. But we cannot tolerate a situation where a line is it's own parent: to avoid to connect BY loops, add a condition that the middle_name or the suffix must be different.Published by: Frank Kulash, July 25, 2012 10:07
Added explanation. -
Disconnect the target iSCSI via the script?
Someone knows a way to script (or command line) a (deletion) offset of an iSCSI target?
Here's how to turn that function:
function RemoveIScsiTarget ($vmHostList, $address, $port) { foreach ($vmHost in $vmHostList) { $storageSystem = $vmHost | Get-VMHostStorage | Get-View $storageSystem.UpdateViewData("storageDeviceInfo.hostBusAdapter") $iScsiDevice = "vmhba33" $iScsi = $storageSystem.StorageDeviceInfo.HostBusAdapter | where { $_.GetType().Name -eq "HostInternetScsiHba" } $sendTarget = $iScsi | foreach { $_.ConfiguredSendTarget } | where { $_.Address -like $address -and $_.Port -like $port } $sendTarget = $iScsi | foreach { $_.ConfiguredStaticTarget } | where { $_.Address -like $address -and $_.Port -like $port } if ($sendTargets -ne $null -and $sendTargets.Count -gt 0) { $storageSystem.RemoveInternetScsiSendTargets($iScsiDevice, $sendTarget) } if ($staticTargets -ne $null -and $staticTargets.Count -gt 0) { $storageSystem.RemoveInternetScsiStaticTargets($iScsiDevice, $staticTarget) } } }
And here is an example how to remove iScsi targets all hosts in your VC:
RemoveIScsiTarget (Get-VMHost) "10.10.10.*" "*"
-
KernSafe using target iSCSI for ESX 3.5
KernSafe iStorage server is an advanced and powerful, full only software iSCSI Target Server for Microsoft Windows
Address of the solution:
http://www.kernsafe.com/Article_Product.aspx?ID=5 & & Aid = 26
Seller:
Oh, my, why don't you tell that the starwind, vmware, firfox, and most other software is all copy of windows? They're all menus, toolbars and dialog boxes, even they seems.
Just because of a dialog box, say you steal, a stupid reason.
Don't lose your heart, Aldrichzh, as much as I know, the person to the top of star is an employee of starwind.
I just santrunk, hong kong, a new provider of iSCSI target business also. But we have done in this period of years, we are also competitors.
BTW, if someone comes here, I'll deal with it.
Aldrichzh,
As you know here, after our new released software, they'll say, I copy from him, I steal, or even crack and change the names of us / stealing source code from him, blah, blah... blah, blah... blah, blah... blah, blah... blah, blah...
HA, people of the Earth like to brag about.
We are competitors, but I hate unfair competition with no quality.
-
How to keep English as a default value in the spell checker after adding another dictionary?
I added a Spanish dictionary for firefox that I sometimes email Spanish-speaking. Since then, the spell checker has stuck to Spanish language by default whenever I restart the browser.
As soon as I select English, it remains until I close the browser. But goes back to Spanish when I open a new window.
I tried every setting I could find, and I also tried to remove and reinstall both languages via add dictionary.
I am at a loss. Can anyone offer some advice?
Thank youYou can check the spellchecker.dictionary pref setting on the topic: config page and if the pref tells the user the value (in bold) and then try to reset via the context menu to the default value.
You can open the topic: config page via the address bar.
You can accept the warning and click on "I'll be careful" to continue.If you do not keep the changes after a reboot or have problems with preferences, see:
Maybe you are looking for
-
Hello I suspect someone who tries to steal my Apple and details. I received an email from a "fake Apple website. Does anyone know if this email is approved?
-
HP deskjet 3050 J610 series don't cut or copy.
I can not turn off the printer. In addition, it prints ok but does not copy. Any suggestions?
-
P4014 with large capacity cartridge
Hello fellow printers,. The company I work for having bought a new HP Laserjet P4014, they also bought a toner cartridge high capacity (CC364X). The problem is when I put the toner cartridge high capacity in the printer, the lid does not close becaus
-
W7 is accepted, but the upgrade fails
I run W7 home Premium that came pre-installed on my laptop. I wanted to move to W7 Pro. Anytime online update doesn't let me do this based on the restrictions of the place, somehow. He suggested that I buy a key from a retailer instead, as I did. Now
-
Extensions, modules, not available in Lightroom CC 2015
Just downloaded "408ProfessionalPresetsCollection_1_0_1.zxp" and installed in the extensions Manager. But it does not appear in the Manager of lightroom.