Adding applications to the jDeveloper 10.1.3.4

Similar Questions

• I missed the path JDK8 for Mobile Application Framework (MAF) after the reboot of the JDeveloper... How can I fix this JDK8 path?

  Hello

  I missed the path JDK8 for Mobile Application Framework (MAF) after the reboot of the JDeveloper... How can I fix this JDK8 path?

  When you try and create a new application of MAF it will prompt you to insert the path JDK8.

• Please help me on the jdeveloper to weblogic application deployment

  At the beginning I just thought after developing an adf application then just deploy as an .ear file and deploy it in the weblogic console and everything will be ok. But actually I had a lot of problems. Then I had a tutorial for it and I do what he says step by step, but some new problems occurred. This is the tutorial I mentioned: [how-to: ADF Deployment Guide | http://www.oracle.com/webfolder/technetwork/jdeveloper/howto/11114/managedserver/wlsadfms.htm]
  
  Now, could someone tell how did deploy your adf application?
  
  Here are the errors I got.
  
  It's the packege of installation and the operating system I use:
  1. 6.3_x64 + jdeveloper11123.jar(include wls10.3.5) + adr centOS (the package name is ofm_appdev_generic_11.1.1.6.0_disk1_1of1.zip) [and earlier, I used a solaris11 of oracle vm and install jdeveloper11.1.2.3, the same probem occurred as CentOS.]
  2 Win7_x64 + jdeveoper11123.exe(include wls10.3.5) + adr mentioned above
  
  Here are the problems I get:
  in case 1, after that I installed the jdeveloper (using the sun jdk 1.7), the weblogic seems to be fine but I na not configure a domain. But after I opened a
  request (which I get from the oracle jdeveloper tutorial demo, which works well in my Win7 env) and I run it, the integrated weblogic can not get
  has started. First in the console it says identifier jrocket - is not recognized, then I edit the setDomainEnv.sh and the startWebLogic.sh file in the
  integrated wls area (that of the Director of .jdeveloper) to assign to the variable JAVA_VM - server. After that another problem emerged: when the
  WLS goes to the 'start-up' status, it is blocked and I turn to System Monitor shows only a thread of java using more than 1 GB of memory in my system
  and occupy 150% of my cpu (it's a dual-core computer). I wait about 5 minutes, when an error came up said "PermSize is too small".so I change the
  setDomainEnv.sh file to set the PermSize be 1024 m and MaxPermSize to 2048. (the name of the variable is something like that, maybe not the)
  exactly on time. "I think you can understand that one is). But the problem is still there.
  
  then in 2 cases in the first place the jdev and integrated wls works fine, but when I deploy an application that works well in one ear of the file, and then deploy it to a
  WLS (10.3.5) autonomous it never Works.the dumb mistake is something libraries of reference/dependencies was not found. Then I tried again a server connection to
  the autonomous wls and I got the tutorial [how_to_deploy_adf | http://www.oracle.com/webfolder/technetwork/jdeveloper/howto/11114/managedserver/wlsadfms.html], as the tutorial says I my standalone patch
  WLS with adr and everything is fine, no error reported. Then I tried the new server in the new slot machine the adminserver management and apply the
  the ADF model in him will overload / console em. But after I restarted the new server (by the console, and then by file stop + startweblogic.bat) the server is running
  the application in the new server is just 'not available '. I tried for three times in three computer, two of them are running win7, it runs Windows XP.
  
  I don't know what the problem is and I'm quite a beginner on this subject. Someone help me please. Thank you very much!
  
  respect, Neo.

  Neo,
  There are a few problems. First of all, jdev comes with its own jdk provided in the product (jdk 1.6_x). The next thing is that if you use JDev 11.1.2.3.0 to build an application you must use a wls 10.3.5 and 10.3.6 where you need to install the appropriate on runtime. In your case, you first install adf runtime 11.1.1.6.0 and then you need to install two patches that update the adf to 11.1.2.3.0 life. These husks are only available through support.oracle.com, which means that you need a support contract to get.
  More information you can find in my blog http://tompeez.wordpress.com/2011/09/14/jdeveloper-versions-vs-weblogic-server-versions/
  The rest of your problems disappear once you have installed the adf right on your server runtime.

  Timo

• "JNDI name is already in use" error when deploying ADF Application after the deployment of Interface of AM Service

  Hello

  12.1.3 JDeveloper / WLS 12.1.3 / Windows 7 64-bit OS.

  I am facing the problem that is mentioned in the following post.

  https://community.Oracle.com/thread/2284290

  I created a simple ADF page with the data to display in the Employees table. The page works fine.

  I added a custom method to the AM and a profile of "Business Service Interface components" deployment of the AOS.

  When I'm trying to deploy the stand-alone WLS Service, it gives the error below.

  If I deploy only the AM Service interface, the web service deployment is going very well.

  If I cancel the deployment of the AM Service and deploy ADF EAR, then it also works very well.

  But if I deploy the AM Service and then try to deploy the EAR, then it gives the error below.

  And vice versa, if I deploy EAR application, and then deploy the AM service, it gives the error below.

  It was working fine until 11.1.1.7.

  I have done this repeatedly for a long time and wasn't any problem in 11.1.1.7 deployments.

  If something has changed in 12.1.3?

  Even if the AM Service is existing, it is deployed in the same application, it should be able to just crush?

  Here are the results with different versions

  11.1.1.7 - domain of the ADF - Standalone Server - works fine

  11.1.1.7 - SOA - Standalone Server - domain works very well

  12.1.3 - error field - integrated WLS - ADF

  12.1.3 - error field - independent server - SOA

  (The foregoing analysis is based on a simple project ADF as a point of Contact for that matter).

  Real-world scenario

  --------------------

  We need this because ours is a BPM Application and the Composite depends on the AM Service, so the AM service must first deployed in the field of the SOA.

  Then, we make the process as well as the ADF UI for task forms. ADF project depends also on the model project

  We get the error during the deployment of the BPM project and the ADF UI project below.

  Error

  -----

  Unable to deploy EJB: ModelEJB.jar model.common.HRAMServiceBean:

  [EJB:011055] The EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar) ", the JNDI name" HRAMServiceBean #model.common.serviceinterface.HRAMService "is already in use." You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  [12: 02:07] caused by: java.lang.Throwable: substituted for the missing class [EJB - 11055] the EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar)', the JNDI name "HRAMServiceBean #model.common.serviceinterface.HRAMService" is already in use. You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  Thanks for any help

  Sameer

  Found a workaround for this problem.

  I don't have to do this in 11.1.1.7 well!

  You don't know if it's the right solution or not!

  If anyone of you knows a better solution, please share.

  I did the 2 following things.

  a. classes of the AM Service Interface of removed files from deployment profile filters

  ViewController project-> properties-> deployment profile--> filegroups--> WEB - INF / classes-> filters

  : Uncheck * Service *. * files (4 - Service.class, Service.wsdl, Service.xsd, ServiceImpl.class)

  b. deleted the deployment profile of library jar ADF for the model project

  Model project-> properties-> deployment

  : Remove the deployment of ADF library jar files profile

  And now I am able to deploy time interface AM Service and application.

  It works for me because I won't need to deploy the AM Service interface again while deploying the process / code of the ADF.

  Since I will deploy the Service Interface of first Business components separately.

  Thanks and greetings

  Sameer

• Configuring user and group LDAP in application of the ADF

  Hi all
  
  I have to use LDAP user and groups in my ADF application. I have configured the LDAP Protocol on WLS Server successfully and you can see all users/groups under the tab "users and groups". I added the role of business in jazn-"Data.xml" corresponding on behalf of the groups. Created the Application role in jazn-"Data.xml" and assigned a business role role.
  
  However, not added any user in jazn-"Data.xml". Which I do not necessary because it will be taken from LDAP.
  
  Now how to set up the JDeveloper for use these users? What changes must make jazn-"Data.xml"? or jps-file config.xml / web.xml / weblogic application. XML
  
  Did I miss nay configuration step. I just ADF security set in place the tutorial step by step - quick - question but not found it useful
  
  I use JDeveloper 11.1.1.5.
  
  Thanking you in advance.
  
  Mukesh.

  Hello
  So, these are the steps:
  1. create an application role and the role of the company in the jazndata file
  2. map of the application role business role.
  3 the provider in the default domain also create sufficient brand
  4. change the default identity provider and set it as sufficient.
  5. start the application and connect using the enterprise user who has group companies are assigned.

  Here are the steps...

• error to save the result of the application of the MDS research

  Hi all
  
  I'm developing a web ADF customizable appicatoion using jdeveloper 11.1.2.0
  
  It works fine when I deploy this application on the metadata repository, but when I save a search result in the search panel it gives following error "you are not allowed to replace this search."
  
  It's my setup in the ADF-Config file
  
  persistence-config <>
  <>metadata-namespaces
  < metadata-store-use namespace = "MAR_TargetRepos" path = "/ page" / >
  < / metadata namespaces >
  < metadata-store-uses >
  < by default-cust-store of metadata-store-use = "true" deploy target = "true" id = "MAR_TargetRepos" >
  < class name of metadata store = "oracle.mds.persistence.stores.db.DBMetadataStore" >
  < property value = "SDM - csd" name = "name of the repository" / >
  < property value = ' jdbc/mds/csd' name = "jndi datasource" / >
  < property value = "GOSA" name = "name of the partition" / >
  < / metadata store >
  < / metadata-store-use >
  < / metadata-store-uses >
  < / persistence-config >
  
  Please help me solve this error

  Hello

  you try to modify a system search, which is not allowed for customization. You can save searches customized in MDS, but do not replace system research

  + 'Query component are now supported the substitution of the saved search feature. When the user clicks on the button "Save...". ', "Create Saved Search" dialog box comes up with field filled with the currently saved search name selected. If the user enters a name of "Research system" and click OK button, an error dialog box indicating "you are not allowed to replace this search:" is displayed. If user enters an already existing, registered the search name then a warning dialog stating "replace the existing search:" is displayed. Clicking OK existing research is replaced with the new definition. If a name is not already present in the list of saved search is provided, a new search with the given name is created. To do this, a new QueryOperationEvent.Operation.OVERRIDE event is added. +

  + Query component now allows the removal of the saved search is currently active research in the query Panel. When the user deletes the currently active saved search, define us the first search system-search as the active search list and refresh the query Panel during a "personalized Saved Search' dialog box is closed. "+

  http://jdevadf.Oracle.com/ADF-richclient-demo/docs/release-notes.html

  Frank

• Why can I not see my rings of friends activity in the application of the activity

  MY girlfriend and I have updated our watches to OS3 and our phones to ios 10.  I want to be able to share our business segments while I travel.  We set up the sharing in the application of the activity on our two phones properly, she can see my activity sounds, as well as its own however on my phone I can only see my rings.  Her rings all show 0...  She shares his activity with a colleague and she could see her too but he did not see his.

  The strange only that we noticed, it was a trait on his 'me' page in the shared activity section which said "you can also share your activity from another device signed your iCloud account. I say strange because it shows a single associated with his account and it is the only watch shown in the list of devices.

  So far I have puzzled friends Apple local Store, and I thought I would do it because both operatlong systems are so new, but to try here and e s if everyone had seen this problem.

  Thanks for reading,

  S

  Hi funkypickl,

  The application of activity is a great way to share your progress with friends and family! There are a few reasons why you are unable to see the activity and progress of your friend. It may be quite possible that activity can be deliberately hidden from your view. Or you can get an invitation that you have not agreed to your girlfriend to view activity pending. Finally, with an internet connection or stable data is required for updates and progress of the activity. Please take a look at the link below for some tips that should solve your problem.

  Share your activity with your Apple Watch

  Special attention to what follows below is in the article above
  
  

  To check waiting for calls,

  Open the application of activity, tap the sharing tab, and then click Sharing. Once your friends accept the invitation, they will appear in the section sharing of enforcement activity on your iPhone.

  Stop sharing or hide your progress

  To stop sharing of activity:
  Open the application of activity on your iPhone.
  Tap sharing, your friend.
  Press to delete a friend. If you do that, they can't see your activity, and you can't see their activity. To begin sharing again, send your friend a new invitation.
  To hide your activity:
  Open the application of activity on your iPhone.
  Tap sharing, tap the friend you want to hide your activity.
  Tap hide my activity. You can still see your friends ' activity, but they do not see your activity.
  To start sharing again, click Show my activity.

  Get help with sharing activity

  Activity sharing requires iOS 10 and watch OS 3. If more than one Apple Watch associated with your iPhone, the sharing tab appear not in the activity until you update all your watches to watch OS 3.
  If you are unable to add a friend, make sure you have a Apple Watch and that you have not added the maximum number of friends. You can add up to 25 friends.
  If your iPhone can connect to the Internet and you are connected to iCloud, you can get the updates relating to the activities of your friends every day. If your iPhone can not connect for several days, or you disconnect from iCloud, you may see missing days.

  Please use the Apple Support communities to post your question. This information should have you look at progress of the activity of your friend in no time!

  Take care.

• test the application on the device displays only a black screen.

  Hello
  I've created Hello world app, app works fine on the Simulator.
  But when I install this application on the device and the launch of devie it shows only a black screen. I'm not sure what is the reason for this.
  Device that I use is Intex clouds fx.
  Everything here in the face of this problem?

  Thank you

  Hi @bhuvan
  I solved this problem by adding this css on my html page.
  HTML, body {}

   background: white;
  

  }

  For some strange reason, app is running but watch entirely black screen.
  Jan Jongboom has helped me to fix this problem, I asked this question on stackoverflow so... Here is the link to this question.

  http://StackOverflow.com/questions/25831952/Firefox-OS-Hello-world-app-works-fine-on-Simulator-but-displays-black-screen-mob

  Hope that this tip will solve your problem as well

• AppleTV pairs with the watch but subsequently does not appear in the application of the watch.

  I have 2 AppleTV, a connected by wifi, domestic one on the LAN by ethernet.  Those on ethernet not showed as a selection on the application of the monitoring, so I "added feature" on the application Remote, the Apple Watch appeared in the matching section of the AppleTV remote and was easily matched.

  But even if the AppleTV can see the watch for matching it still does not offer as one of the selections, just connected wifi AppleTV and my iTunes home sharing.

  Just rebooted, removed and re-paired the watch with the ethernet connected AppleTV and still it is not offered as an option in the Remote app.

  How could he be watch for matching and not for actual use?

  Hi Bob

  Guidelines for the use of Apple Watch as a remote for Apple TV Apple inform that this is possible when the devices are connected to the same Wi-Fi network:

  "You can use Apple Watch as a remote control for your Apple TV, when you are connected to the same Wi - Fi network."

  More information:

  Use Apple Watch as a remote for iTunes or Apple TV - Apple Support

• Duplicate the application in the "open with" context menu

  Hi all

  On my iMac, the last OS X El Capitan.

  For an example, so I mediainfo application on the app store and it works fine, no problem.

  What happens if I go to a video rile, do a right-click, open with... There mediainfo twice, optionally including a version and the other a newer version if instead of upgrading to the new version of its kept the two versions?

  So I look under 'Applications' and that is only once not twice.

  I click and hold the icon for mediainfo in launchpad, it wiggles, I press x to delete it form party launchpad and its applications in the finder.

  But there must be somewhere because he is always right click on the menu 'Open with' and it actually load the program if you choose somehow even if it isn't the disk hard mac! ?.

  I did a search and don't see you mediainfo application anywhere on the disc hard mac.

  I have a copy of super duper of my HDD on an external hard drive that probably the application it but can it really be getting the external application and adding it to "open with" menu and launch the application from the external hard drive? If yes then this is not cool...

  I also noticed right on a PDF right-click, open with Watch 2 entrances of Safari 2 on iBooks, google chrome 2, all are an old version and one is a more recent version, where could he be getting from and the addition in the menu "open with?"

  If it is picking up my applications folder on the external drive backup and using that in the open with menu and launch the application from the external backup then it is really bad, it should only be launched from applications to disk hard mac shouldn't it?

  Any ideas?

  .

• Mail application drains the battery on the iphone 6 (iOS 9.2)

  Hello

  Since the 9.2 update my apple mail app drains the battery really fast. It has 3 accounts (outlook, apple, imap) and tried to extract emails not to push but did not help. When I check in the menu of the battery in the last mail 24 hours with 2 min on screen + 2 min backgroud used 17% (this is equivalent to Facebook 28 min 45 min phone used only 9% or + 22 min back). I tried other email applications, but for me, this one is pretty good and does not want to use another app for something I already have. Is there any solution for this or should I wait for an update of the software?

  Thank you

  Have you tried force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again?

  You won't lose data, but it can cure some problems after installing new software.

  For some users, deleting the mail account and adding back once the phone reboots worked, especially when you use an exchange account.

• VI Analyzer in an application using the built

  I have an application which is designed for a continuous integration server.  This application uses the VI Analyzer API (Labview 2009 for the moment) to run a series of tests on a case of the screws.  The problem is that when the program is run like VI all is happy, that the folder is added using the 'Add VIAn Item.vi' and the task runs on the four VI in the folder.  But when the VI is built and comes as an exe file, 'VIAn Add Item.vi' appears to add the folder but no vi is analyzed and if a specific VI is given then error 53 is thrown by "NI_FileType.lvlib:Get leader Type.vi.  Is it just a case of not being able to use the VI Analyzer API in a built application that is running as an exe?  I have attached the front panel of the application built after he was executed and the rear panel of the source code in question; There is more that the rest is just to determine the paths to analyze.

  The VI Analyzer API is not supported in a built EXE.

• Path of the application on the device

  Hi people,

  I just developed my first BB app and deployed on the device.

  I have added a text file to the request referring to http://supportforums.blackberry.com/t5/Java-Development/Add-plain-text-or-binary-files-to-an-applica...

  What I need to know is, on the removal of the application of the phone, this file also automatically disappears?

  Also, how I find the physical location of this text file and therefore the .cod file on the device?

  the file is inside your cod. whenever the operating system stores files of cod, it is not accessible by the user.

  If you remove the application, the file also disappeared.

• Adding icon in the background transparent when Michael

  Hi, I am observing interesting phenomenon (?)

  I've added an icon to my request that I developed using the guide provided by the kb article:

  http://docs.BlackBerry.com/en/developers/deliverables/21877/Add_icon_to_configuration_file_1374808_1...

  The icon has been added successfully on the Simulator and everything is normal but I notice that the background becomes now when I disable the soft (drag up to zoom out of the window of the application).

  It's weird because in the zoomed view on, all components are present (such as areas of labels, buttons, etc.), but the background (which is black) becomes transparent. When I again focus the application, the background color become serious.

  (Although I recognize that this method of adding icon is suspicious because he tells me to create another .xml file when there is a present already - one that was created when I first implemented the project - it's perhaps is the source of error...?)

  I'm afraid that RIM will reject the app for this reason, so I'm holding presentation until this issue is resolved.

  Anyone have any idea what can cause this? !!

  Any help is appreciated!

  Nevermind, I solved my case. The answer was hidden

  http://supportforums.BlackBerry.com/T5/Tablet-OS-SDK-for-Adobe-air/problems-while-publishing/TD-p/69...

  Transparent tag in the .xml file must be set to false.

• How to show the message from the application in the notification bar to the home screen with the compilation of the OS 5.0 on OS 6.0

  Hi, expert,

  I've implemented the ApplicationMessageFolder to add the message to the application in the device message box. We also set the indicator on the notification bar. To OS 5.0, we could not click the notification bar to see a summary of the message. 6.0, we could do it, but although our application put new notification on the notification bar, it will not be shown on the summary message by clicking on the notification bar.

  From this link: http://supportforums.blackberry.com/t5/Java-Development/Application-Indicators-and-Home-Screen-Integ..., it says:

  ========================

  Applications that add custom messages can specify if they are displayed in the summary of the notification.  This is done using the ApplicationFolderIntegrationConfig, which was added in BlackBerry Device Software version 6.0, as shown in the code example below, which is an extension of the previous example.

  ===========================

  However, our application is built with Java SDK 5.0 as our minimal operating system is 5.0. That does not mean that there is no way that we could do? Thank you very much in advance for any idea about it.

  You can use preprocessing, but it should be a separate os 6 version, then.